upgradeing a new rom - 8125, K-JAM, P4300, MDA Vario Software Upgrading

ok i have been updating for about 7 minutes now and it has said 2 percent almost the whole time, is this normal, i am putting a wm6 rom on there

some1 help me, should i unplug it? im not sure what to do ive been trying to upgrade it for almost 25 minutes now and it is still 2 percent
any1 help me
i cant find **** on the site about this

You didn't CID unlock, did you?
Flash with your original stock ROM and CID unlock it (G3) or HardSPL/SoftSPL(G4) before flashing.
And, don't use foul language please.

Related

Help installing Original ROM after Upgrading to Custom

Hi
I tried upgrading to the rom below
Custom_RUU_Wizard_1050402_101_11210_O2_ENG_CID.exe
but it made my imate totally sluggish and really slow, especially when opening mesages etc. I decided I wanted to revert back to the original imate ROM but when I was installing it it failed before even getting to 1%
It stayed at the point where my k-jam was red blue green etc
Anyone suggest why this might be the case?
Also can someone explain what the CID unlocker is used for? Does it allow you to 'downgrade' ROMs?
Thanks for your help guys. I'm still quite new to this
Scaseman
CID unlockeris is needed to be able load roms that are not made for your phone... like MDA Vario without CID unlocker cant take rom that was made for Qtec and other way...
try RUU_Prodigy_1060701_101_11310_QTEK_WWE_Ship.exe
its the best rom for me... make sure you run CID unlocker first and after WM5 loaded hit reset on your phone so it wont load cabs from extended rom (if you dont want them)
how to reinstall ROM of XDA ll mini
i tried to upgrade my XDA ll mini ROM with 'XDA ll upgrade file' given at 'o2-online.de' instead of giving me error report at the beginning of upgrade it started erasing my ROM and then gave me an error.now my rom is erased and it cant be turned on.however when i connect it to the pc through USB cable ,on the srceen "USB v1.02" is being displayed.how to reinstall the software and where can i get the download file.please help i used my phone 1 month back.

URGENT!! Wizard WM6 upgrade stuck at 96%

Anyone please help!..
i tried to upgrade my G3 Wizard to Crossbow Underground and it stuck at 96%!..
What should i do? please help.
Yes -- the install will "hang" at 96% for 2 - 3 minutes. But then, it will complete the process pretty quickly.
My advice for ANYONE flashing ANY ROM is to leave the room for about 15 minutes while it's upgrading. Those 10 minutes can seem like an eternity -- especially the 2 - 3 minutes where the install process appears to "hang". DO NOT disconnect the device during the update.
so? this is normal huh? even thought im not CID Unlocked? becouse i didnt check whether my wizard is unlock or lock..
im still stuck 96% for 30mins.. what took this so long?
Ok its done..
but men!.. its still WM5.. now i know that my wizard is CID locked..
Thanks!
double_ofour said:
Ok its done..
but men!.. its still WM5.. now i know that my wizard is CID locked..
Thanks!
Click to expand...
Click to collapse
I have the same problem i only don't know how i get my normal version back
jordy08 said:
I have the same problem i only don't know how i get my normal version back
Click to expand...
Click to collapse
I'd say you have a LOT of reading to do to answer that question. . .
Start with the Wiki and the Stickys at the top of this forum. . . both are chock full of useful information -- yours for the taking

upgrade didn't work

i tried several times like described here http://forum.xda-developers.com/showthread.php?t=285435
but always when i want to downgrade my rom with the mentioned button 1.05 rom it went till 98% an then my wizard didnt do anything until i reboot it.
with the standard o2 rom i have the lokiwiz didnt work. but what could be the fault ? what can i try to get it work ?
peran281 said:
i tried several times like described here http://forum.xda-developers.com/showthread.php?t=285435
but always when i want to downgrade my rom with the mentioned button 1.05 rom it went till 98% an then my wizard didnt do anything until i reboot it.
with the standard o2 rom i have the lokiwiz didnt work. but what could be the fault ? what can i try to get it work ?
Click to expand...
Click to collapse
Who knows, you didn't tell anything useful about your phone or what ROMs or anything else. Try the link in my sig. Read it, do ALL the steps, if you think you can skip something--don't, if "it doesn't work"--then you didn't follow all the steps.
Best of luck,
--M
peran281 said:
it went till 98% an then my wizard didnt do anything until i reboot it.
Click to expand...
Click to collapse
I think this may be part of the problem... How long did you wait? All roms stall at some point and can stall for like 5 mins (sometimes more). Don't do ANYTHING, unless your PC gets an error. Its still working. If it sits for more than 10 mins then you probably do have a problem, but it can sit for what seems like forever sometimes. Just be patient.
If it sits for more than 10 mins then you probably do have a problem
Click to expand...
Click to collapse
i tried it several times and i always had to wait about 20 - 30 minutes and always the same result being hung up at 98%.
about your phone or what ROMs
Click to expand...
Click to collapse
here i have some data. i have
ipl/spl: 2.21(o2 ger rom)
gsm : 02.19.11 (o2 ger rom)
os:2.21.4.3 (o2 ger rom)
i hope that is all the important info u need.
i'll try the link from demontefixo and let u know if it work.
Tried flashing on anther pc yet? For most people with this kind of problem that's the solution.
Tried flashing on anther pc yet?
Click to expand...
Click to collapse
i have 2 pcs and 1 laptop and i used all of them one time.
i used now this installationhttp://forum.xda-developers.com/showthread.php?t=298613
and it stucked on step G3.4 when i want to flash the wizard_love rom with this error:
ERROR [300] : INVALID UPDATE TOOL
This error message will appear when you use the incorrect RUU version to upgrade.
what did i do wrong? i followed step by step like demontefixo said for 3 times.
peran281 said:
i used now this installationhttp://forum.xda-developers.com/showthread.php?t=298613
and it stucked on step G3.4 when i want to flash the wizard_love rom with this error:
ERROR [300] : INVALID UPDATE TOOL
This error message will appear when you use the incorrect RUU version to upgrade.
what did i do wrong? i followed step by step like demontefixo said for 3 times.
Click to expand...
Click to collapse
This is an error that you can get on G4 devices. What are you doing in step G3.4? Read G4.6!
but in the tutorial http://forum.xda-developers.com/showthread.php?t=298613
is described how to determine the wizard type and my ipl/spl is 2.21 and thats G3 device.
peran281 said:
i used now this installationhttp://forum.xda-developers.com/showthread.php?t=298613
and it stucked on step G3.4 when i want to flash the wizard_love rom with this error:
ERROR [300] : INVALID UPDATE TOOL
This error message will appear when you use the incorrect RUU version to upgrade.
what did i do wrong? i followed step by step like demontefixo said for 3 times.
Click to expand...
Click to collapse
That error indicates you aren't CID Unlocked. Is your phone booting now? or are you at the bootloader (rainbow) screen? If you are at the bootloader, then flash your official rom to get a working device. Once you have a working device, then go to step G3.6 and do the CID Unlock procedure.
ALso remove your SD card while you are doing all of this until you get it CID Unlocked and onto the TMobile 2.26 official rom (G3.8).
AND yes, you have a G3, so you don't (and shouldn't) be in the G4.x steps.
i want to downgrade my rom with the mentioned button 1.05 rom it went till 98% an then my wizard didnt do anything
Click to expand...
Click to collapse
yes but thats my problem. i tried it like described here http://forum.xda-developers.com/showthread.php?t=285435
and always the same problem. is there another way to cid unlock the device ?
peran281 said:
yes but thats my problem. i tried it like described here http://forum.xda-developers.com/showthread.php?t=285435
and always the same problem. is there another way to cid unlock the device ?
Click to expand...
Click to collapse
This is my last post for the day as I can't handle anymore of this (its not just you peran, but the other half dozen posts I've read in the last hour or so where people just aren't following the instructions they are given. These methods are tried and true, and they work. And yes, this is the way to CID Unlock your phone unless you pay to have it done)... In a previous post to you, it was stated you had to get back to an official rom first. Have you done this (your replies indicate you just continue to do other roms)? You need to get the latest rom from your carrier and get your device working again. Get it all charged up, pull out your SD card, then try flashing back to the button rom (I would also suggest you try pulling the button rom down again in case there is something wrong with your previous download of it).
Its the weekend, I'm going to go enjoy the spring weather
i did it like u suggested mfrazzz. i know that my phone isnt CID unlocked. but that is my problem. i read the mentioned article x-times and did it like described but the problem is : when i downgrade to button 1.05 rom then my pda stuck at 98% and i get the message from the update program on my pc that the downgrade was successful. but it isn't. why? till this step u cant do much wrong i think... :-(
Have you flashed back to the official rom from your carrier? Until you do that and get your device back working there is no point in trying to continue to flash the button rom (or any other rom). You have to get back to your carrier's official rom first. None of your posts indicate you have done that.
with the standard o2 rom
Click to expand...
Click to collapse
i always went back to the official rom from my provider and this always works perfectly. i tried it today again but always the same stucking at 98%.
i did it STEP BY STEP but it didnt work.
is there another rom i can use than button 1.05 ?
Is there no other rom then the one from button to downgrade my ipl/spl to 1.xx ?
please help.
I'm not aware of another one.
You might want to try this thread (I know its not the same issue, but might be worth trying to see if it makes a difference)
http://forum.xda-developers.com/showthread.php?t=294107
You might want to try this thread (I know its not the same issue, but might be worth trying to see if it makes a difference)
http://forum.xda-developers.com/showthread.php?t=294107
Click to expand...
Click to collapse
I tried it but it didnt help.
now i used Xelecin's 1.08 rom and this one worked. then i used lokiwiz and it was successful. but then i flashed the tmobile 2.26 rom and this worked but i couldnt use my sim-card any more. always when i insert my pin it said unknown sim and then crashes. i thought i sim-unlocked the wizard? another problem was when i want to flash the official o2 rom it said unknown vendor id...but i used before lokiwiz and there were no errors...and the last question, i know there are many now, where do i insert the sim-code i got from lokiwiz?
i hope someone have some answers...thx before

spv m3000 stuck at 98% with rom

Great my wizzard is stuck
its on 98% then de blue/green bar on my phone turned red en stays that way it doesnt do anything anymore, after a while my computer says the installation is finished, (SOMETIMES i get an error that has something to do with memory on my computer. or it says usb connection got lost or something)
i can reboot my phone but its going straight in the boot menu with those collors, i can try the downgrade rom again but it keeps getting stuck at 98%
anywone some suggestions?
I tried to install the folowing: CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
becose i wanted to unlock my phone (dont know if its locked or not)
I tried a few other roms but they wont install at all
I forgot some info:
ipl/spl 2.18 so i have/ (HAD) a G3
gsm 01.04.10
os 2.18.1.3
it is an orange m3000 (i have a t-mobile simcard)
im using my sim in another phone do i need the simcard in the m3000 ?
well a few minutes later:
i put my simcard in my phone, but it still hangs
i tried in now on 2 computers but both are stuck at 98%
on my second pc i get the message ERROR [302] : UPDATE ERROR
The ROM update Utility has encountered communication errors during the update process. The program will guide you stem-by-step to recover from te errors so you can continue with the update.
2 choices to click: View Document or Recovery
lol i did the Recovery it made me put out the battery and reboot the phone en replug the cables
well ill try again then... :|
did it about 8 times now, keep getting stuck at 98% notice that the bar becomes red at 98%
anywone please any suggestions? im afraid i bricked my phone
There are 24 people who look at this topic and nowone has a clue what i need to do???
kaasaanfiets said:
I tried to install the folowing: CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
becose i wanted to unlock my phone (dont know if its locked or not)
I tried a few other roms but they wont install at all
I forgot some info:
ipl/spl 2.18 so i have/ (HAD) a G3
gsm 01.04.10
os 2.18.1.3
it is an orange m3000 (i have a t-mobile simcard)
im using my sim in another phone do i need the simcard in the m3000 ?
Click to expand...
Click to collapse
is a 1.04.10 radio a valid radio for a 2.xx rom?
If you are stuck, the only/best way to recover is to flash an official rom from your carrier. You can get to the bootloader so you are NOT bricked. You are just flashing roms that have a CID that doesn't match your phones. Try the button rom or the wizard love rom that the unlocking stickies mention repeatedly.
Were your IPL/SPL 2.18 before you started?
Read the Wiki, Read the stickies. For every person that says the process doesn't work there are 100 that it works flawlessly for and 99% of the time those that can't get it to work don't follow all the steps in order or just outright skipped steps or substituted with what THEY thought was better. There is a reason for each and every step in the guides. IF you follow them properly you WILL NOT have any issues.
For the situation you are in now: STOP trying to flash custom roms, you MUST get your phone back to a usable state before you go down that path again. Use your carriers latest available rom to recover your device.
Also you are lucky to get an answer at all because your question is asked in almost every single new thread and every single ROM thread. The answers are already easily found if you take the time to look yourself.
thanks man, i tried the original orange rom and it worked.
RUU_Prodigy_2180103_21801103_OR_NL_DUT_Ship.exe
im so happy, thank you for all your helpful comments
2.18 before i flased is yes.
i wanted to copy a new rom to my device, but i thought it was cid locked.
so i followed step by step the guide from faria
http://forum.xda-developers.com/showthread.php?t=263116&highlight=stuck+at+98%
but i think the problem was that i did not have an aku2 or whatever that means.
Im sorry if im being rude, but you people do a wonderful job on those roms and step by step guide's but u forget that there are people that have no clue what aku2 means when i google is, it says a new rom from t-mobile with wm5 but it doenst say how somewone can check for themselfs if they have an aku2 rom...
Im verry sorry for those noob questions but it look like a heva the same rom that i had before i messed it all up.
so can i install a new rom from here? like one of these?
Pro Black 3[1].0.1.exe
CB-AIRAF.exe
?
kaasaanfiets said:
thanks man, i tried the original orange rom and it worked.
RUU_Prodigy_2180103_21801103_OR_NL_DUT_Ship.exe
im so happy, thank you for all your helpful comments
2.18 before i flased is yes.
i wanted to copy a new rom to my device, but i thought it was cid locked.
so i followed step by step the guide from faria
http://forum.xda-developers.com/showthread.php?t=263116&highlight=stuck+at+98%
but i think the problem was that i did not have an aku2 or whatever that means.
Im sorry if im being rude, but you people do a wonderful job on those roms and step by step guide's but u forget that there are people that have no clue what aku2 means when i google is, it says a new rom from t-mobile with wm5 but it doenst say how somewone can check for themselfs if they have an aku2 rom...
Im verry sorry for those noob questions but it look like a heva the same rom that i had before i messed it all up.
so can i install a new rom from here? like one of these?
Pro Black 3[1].0.1.exe
CB-AIRAF.exe
?
Click to expand...
Click to collapse
You will not be able to install a CUSTOM rom until you CID unlock. I don't believe the Black 3.0 rom is available for the Wizard. It is a Hermes rom. There are several WM 6 roms available for the wizard, you should probably look in the WM6 sub-thread once you get yourself completely CID unlocked.
The tutorial tells you everything you need to know, even if you don't know anything about anything. Just read the instructions follow the links to download the roms/tools that it is talking about. If you don't understand the instructions you can post in that thread and the authors or others will help you there. Though they most likely will not respond until you show that you have read and at least have an idea of what you are trying to do, where you started where you are and where you would like to end up. If you don't understand the instructions there is always the IMEI unlockers site that will give you a utility to do it if you want to pay them for it.
Why are you trying to upgrade? Do you need to upgrade? Are you willing to void your warranty on your phone? Can you live without it if something drastic happens and you truly do brick your device, in most cases you will not be able to exchange your phone under warranty? If you haven't defined the first question or answered no to any or all of the other questions you shouldn't be rom flashing, especially not with unapproved roms that aren't supported by your carrier. You need to measure the potential gains against the risk of doing these things to determine if it is right for you. Once you get unlocked and flash a couple of roms you will see that it is easy and relatively safe as long as you read and follow the instructions they are tried and true and do work if they are followed properly.
I would suggest using this thread to unlock your device: http://forum.xda-developers.com/showthread.php?t=285435
Zzan said:
You will not be able to install a CUSTOM rom until you CID unlock. I don't believe the Black 3.0 rom is available for the Wizard. It is a Hermes rom. There are several WM 6 roms available for the wizard, you should probably look in the WM6 sub-thread once you get yourself completely CID unlocked.
The tutorial tells you everything you need to know, even if you don't know anything about anything. Just read the instructions follow the links to download the roms/tools that it is talking about. If you don't understand the instructions you can post in that thread and the authors or others will help you there. Though they most likely will not respond until you show that you have read and at least have an idea of what you are trying to do, where you started where you are and where you would like to end up. If you don't understand the instructions there is always the IMEI unlockers site that will give you a utility to do it if you want to pay them for it.
Why are you trying to upgrade? Do you need to upgrade? Are you willing to void your warranty on your phone? Can you live without it if something drastic happens and you truly do brick your device, in most cases you will not be able to exchange your phone under warranty? If you haven't defined the first question or answered no to any or all of the other questions you shouldn't be rom flashing, especially not with unapproved roms that aren't supported by your carrier. You need to measure the potential gains against the risk of doing these things to determine if it is right for you. Once you get unlocked and flash a couple of roms you will see that it is easy and relatively safe as long as you read and follow the instructions they are tried and true and do work if they are followed properly.
I would suggest using this thread to unlock your device: http://forum.xda-developers.com/showthread.php?t=285435
Click to expand...
Click to collapse
I bought my phone second hand (i dont have a receet of something) so i dont have any warranty anymore
i like my phone but i have troubles with sms the recever keeps getting old of no messages so that why a want another rom
i would be a shame if i brick it, but im willing to try
im doing the steps from your link now, ik istalling te rom at the second point but it still is stuck on 98% :|
is there another 1.5 rom? that i can try? i read someting about the love rom
kaasaanfiets said:
I bought my phone second hand (i dont have a receet of something) so i dont have any warranty anymore
i like my phone but i have troubles with sms the recever keeps getting old of no messages so that why a want another rom
i would be a shame if i brick it, but im willing to try
im doing the steps from your link now, ik istalling te rom at the second point but it still is stuck on 98% :|
is there another 1.5 rom? that i can try? i read someting about the love rom
Click to expand...
Click to collapse
The Wizard Love rom is another that people use when the Button rom doesn't work for them. I don't have a link to it but I am sure it is linked in the Upgrading or G4 sub-forums. Maybe even in the Wiki. Sorry haven't been spending much time in the Wizard forums as I only flash my wizard when something breaks, or a new feature is added -- My wife uses that phone now .
There is always the pay to unlock website but you should be able to get it unlocked with either button or the wizard love rom.
Just out of curiosity how long do leave it sitting at 98% before you determine that it is stuck? All roms "stick" at a few points during the flashing process. If you didn't wait at least 5 minutes or get an error on your PC you probably didn't wait long enough. Best advice I have on this is disable all power management/screen savers on your PC set up the flash. Once it starts leave the room and close the door for no less than 30 minutes. This way you can be sure that you didn't interrupt it. For a Wizard the flash should complete in 10 minutes or less. For the Hermes it can take a full 30 minutes depending on your flashing method an which components you are flashing. It is normal to hang for a few minutes at different points during the flash process, just because there is no transfer doesn't mean something isn't being decompressed/written on the device from what has already been transferred over.
Zzan said:
The Wizard Love rom is another that people use when the Button rom doesn't work for them. I don't have a link to it but I am sure it is linked in the Upgrading or G4 sub-forums. Maybe even in the Wiki. Sorry haven't been spending much time in the Wizard forums as I only flash my wizard when something breaks, or a new feature is added -- My wife uses that phone now .
There is always the pay to unlock website but you should be able to get it unlocked with either button or the wizard love rom.
Just out of curiosity how long do leave it sitting at 98% before you determine that it is stuck? All roms "stick" at a few points during the flashing process. If you didn't wait at least 5 minutes or get an error on your PC you probably didn't wait long enough. Best advice I have on this is disable all power management/screen savers on your PC set up the flash. Once it starts leave the room and close the door for no less than 30 minutes. This way you can be sure that you didn't interrupt it. For a Wizard the flash should complete in 10 minutes or less. For the Hermes it can take a full 30 minutes depending on your flashing method an which components you are flashing. It is normal to hang for a few minutes at different points during the flash process, just because there is no transfer doesn't mean something isn't being decompressed/written on the device from what has already been transferred over.
Click to expand...
Click to collapse
Yes well i waited the first time for like 15 minutes then my computer shut down the update programm
today i waited like 30 minutes cos i even had dinner.
Well ill try the love rom some other time cos i need my phone to work sunday becose i need tomtom
thank you for your information i appreciate it verry much
i noticed that the original rom that does work: RUU_Prodigy_2180103_21801103_OR_NL_DUT_Ship.exe that one, also flashes red and green while installing so i guess thats normal...

Strange thing happend to my Wizard

Hi guys!
Tried to flash the phone with WM6 rom via RUU - didnt work, so i took a ShellTool and tried with this one - and now its the best part:
its teeling it can take more than 15mins but i took more than 1 hour - nothing happened, so i disconnected the phone a hard reset it.
OMG its telling OS 4.0.0.0 and wont boot so i took MrClean 2.24 rom pout the phone in bootloader mode with camera+reset and succesfully flashed it to MrClean.(now i think Im a god)
but after succesfull booting it satrted customizing and reset itself... from now on its copletely dead, no response
do you guys have had something like this or maybe some of you know what happened
My device is G4
thx in advace, cheers
gutaker said:
Hi guys!
Tried to flash the phone with WM6 rom via RUU - didnt work, so i took a ShellTool and tried with this one - and now its the best part:
its teeling it can take more than 15mins but i took more than 1 hour - nothing happened, so i disconnected the phone a hard reset it.
OMG its telling OS 4.0.0.0 and wont boot so i took MrClean 2.24 rom pout the phone in bootloader mode with camera+reset and succesfully flashed it to MrClean.(now i think Im a god)
but after succesfull booting it satrted customizing and reset itself... from now on its copletely dead, no response
do you guys have had something like this or maybe some of you know what happened
My device is G4
thx in advace, cheers
Click to expand...
Click to collapse
Is the phone CID unlocked?
Did you use an RUU from same provider?
If none of these answers is affirmative then you better forget that phone. Only recovering via JTAG (requires tools, knowledge (which you can't find here) and skills) or by getting a new board.
Last chance may be a flat battery; try a new one or charge that in another phone.
cheers
Suprising that a RUU didn't brick your phone (or probably it did).
Try charging the battery?
thx for replies guys
no my phone is not cid unlocked and as far as i know none get cid unlocked g4
i used ruu 2.5.2 from xda ftp, so as you said probably my phone is bricked...
thank god (or someone else) there are friends of mine owning same phone so i can try with other batteries
the strange thing is that not ruu bricked it, i think the post flash customization is faullty...
will keep you up to date
just to inform you:
after few days (weeks) of laying inactively on my desk i managed to try once again to resurrect my brick...
assuming the battery is empty i connected my WIZ to a charger and surprise! it lighted the red led for about a second... now i'll wait a few hours and see whats gonna happen
btw: anyone of you guys had something like that in the past?

Categories

Resources