Related
Hi,
I can't GPS signal no matter what I try. I didn't change any default settings in External GPS.
I've installed TomTom and Google maps but neither application is seeing GPS device. In TomTom I get no valid GPS signal and in Google Maps I get not able to initialise the GPS. I've tried using both of the appications with clear view of the sky and left the phone for about 30mins to try and find the satelites.
Any ideas?
I'm thinking I'm having a faulty device but I don't want to replace it just in case I get the new one with SOD problem.
Thanks for any help.
Dt11
at the moment i got the same problem! I can't get it running. The yellow LED is on but there is now signal! Pls help us...
(PS: GpsViewer does not work)
Geko
Try Autodetect of GPS ports maybe the settings were accidentally changed
darkilici said:
Try Autodetect of GPS ports maybe the settings were accidentally changed
Click to expand...
Click to collapse
From Com1 to Com11 open failed or None
hmmm
Did you change something on the "External GPS" setting?
If yes, then I think you need to hard-reset.
gogol said:
Did you change something on the "External GPS" setting?
If yes, then I think you need to hard-reset.
Click to expand...
Click to collapse
I thought your going to ask this Yes I did once...
Hmm ok i save all my things and then lets try...
Grrr. Why is Htc is not able to get this work without hard resest?
Geko
Yeah, HTC should improve that one.
The hard-reset thing is described here:
http://forum.xda-developers.com/showthread.php?t=330235
ok thx now it does work....
So dt11 you have to do the same otherwise it wont work...
Geko
Stupid question, but hard reset = soft reset but holding down the 2 soft keys as well yar?
There was a discussion of this in some previous threads, based on which I installed the GPS Viewer and after activating GPS with that (com 4, 4800 baud) Google maps worked very well. No need for a hard, rest, please search the previous topics in GPS and Kaiser
[COM4 / 4800 baud] are the default settings aren't they? I think i've tried those before :S
michalopoulosgk said:
There was a discussion of this in some previous threads, based on which I installed the GPS Viewer and after activating GPS with that (com 4, 4800 baud) Google maps worked very well. No need for a hard, rest, please search the previous topics in GPS and Kaiser
Click to expand...
Click to collapse
hmm this solution didn't work on my Kaiser...
Geko
Question:
Does someone have the "GPSmeter Professional Edition" running?
If i do install this app and run, it's over with the built in GPS so
don't install this app i always got problem with this one...
Can someone else confirm?
Geko
i couldnt get google maps or windows live to work without first running gpsviewer but when my new copy of tomtom navigator 6 (the trial didnt come with my phone) i did a clear storage which takes the phone back to its factory settings and then tomtom work super fast and very accurate in all kinds of weather without having to install a "jumpstart" software.
the way the GPS seems to work is you need a app that will start the GPS for you hence why most HTC bought Kaisers come with tomtom once you start tomtom hit the ok button and then start google maps or Live maps and GPS will work. there also is an app called GPSViewer i believe that will also start the GPS for you. I dont think anyone has gotten Google maps to start the GPS by itself?
austinsnyc said:
I dont think anyone has gotten Google maps to start the GPS by itself?
Click to expand...
Click to collapse
Some people have reported that they have but I always seem to need to give it a boost. I use GpsViewer and that always seems to get Google Maps started okay.
Cheers.
All working now. I had to do a hard reset.
It has been said so many times but it won't hurt to repeat it:
WARNING: Don't touch any settings in "External GPS"!!! Otherwise your GPS will not work and you will have you hard reset you phone!
FWIW, I did not have to jump start my GPS in my 8925 with the default ATT ROM. Once I replaced it with the HTC ROM, I now have to jump start it. So it appears whatever the problem is, it's fixable via software.
i have a tilt along with 3 GPS software: miomap 3.3 oncourse navi6 and google maps. i updated to the latest rom, duttys wm6.1...and gps works
gps works great but now it doesnt work..com port is set to 4 and when i load the gps software, it loads..but when i set the com port within the software..whole phone freezes...i have to soft reset...
all software freezes at "starting..." during program startup
setting to a different com port..i can load the software..but setting the com port in the software freezes again..
i tried to back track...but i cant seem to find the problem besides hard resetting..
anyone have this issue? ..i even tried uninstalling googlemaps/miomap etc but still same issue..
thanks!
found the solution...i used gpstuner!
http://forum.xda-developers.com/archive/index.php/t-287257.html
maybe its googlemaps that messed up the settings, but i dont see any changes in the registry?
http://forum.xda-developers.com/showthread.php?t=360168
My device was working find with regards to GPS usage. I had to do a hard reset for some other issues. Now I can't get the GPS to work with TomTom or any other program where you specify the Com port.
Programs that work:
Live Search - Setting Windows Managed GPS Intermediate Driver
RunGps - Setting Windows Managed if you ask the program to find the port it will not find one. (Great Program)
Programs that don't work:
TomTom - Can't find the GPS whether I choose Internal or Other NMEA
GPS Test - Never finds the GPS
Any suggestions? Not really in the mood to do another hard reset but if folks think that will help I will try it. I have searched the forums and haven't found any specific answers to this.
This is an AT&T Tilt with the stock rom latest version from AT&T. No other modifications. I am not afraid to try editing the registry if need be.
Thanks,
Chris
bump.
Anyone?
did you install any gps software, i installed some crappy google maps knockoff and it borked my gps to where no program would connect had to hard reset my phone to get it to work again.
pdtp said:
did you install any gps software, i installed some crappy google maps knockoff and it borked my gps to where no program would connect had to hard reset my phone to get it to work again.
Click to expand...
Click to collapse
Nope. I have Live Search and RunGPS. Neither program has ever interfered with TomTom. Seems like something has gone wrong with the com port that the internal gps uses.
After a hard reset your first lock will take a little longer. How long have you left tomtom running to be able to get a lock? It might say no gps device for a goot 10 min before it locks on.
Also when you start up tomtom is the orange light blinking?
fone_fanatic said:
After a hard reset your first lock will take a little longer. How long have you left tomtom running to be able to get a lock? It might say no gps device for a goot 10 min before it locks on.
Also when you start up tomtom is the orange light blinking?
Click to expand...
Click to collapse
No lights. Running for 20 min and still can't find the device when set to internal gps. Thanks for the info though it was worth a try.
I have TomTom 6 and it is set to "Other BlueTooth GPS receiver" and Com4.
In Windows Mobile, Start, Settings, System tab, External GPS, Program port is Com4, GPS hardware port is (none), Baud 4800.
kierandill said:
I have TomTom 6 and it is set to "Other BlueTooth GPS receiver" and Com4.
In Windows Mobile, Start, Settings, System tab, External GPS, Program port is Com4, GPS hardware port is (none), Baud 4800.
Click to expand...
Click to collapse
That didn't work either. I am going to do another hard reset this weekend and see what happens. I will install TomTom before anything else.
Thanks for all the suggestions. I gave up and did a hard reset. First thing I installed was TomTom. It now appears to work as previously. Not sure what took out the com port but now all is well.
live searh????
hi i upgraded my phones operating sistem or i shal say someone else did it for me other wise i would be able to figure this out my self. i cant get livesearch to run in the new windows mobile 6.1 why???? any one? any one????
Hi all, yesterday i've changed the "external gps settings":
COM8 For virtual GPS port and COM 4 as Hardware GPS port, baud 9600.
Today i was using my GPS the first time after the settings descripted before...
The GPS Works, but at regular intervals of 2 sec, then stops for 10 sec (No GPS Found with Tomtom) and works again.....
Now i have 3 questions:
1) Can i solve this WITHOUT an Hard Reset??
2) If i disable the Virtual com port, tomtom DON'T let me choose another COMport (it skips the Comport configuration page) and, when it allows me to select the right port, the COM4 isn't there
3) There are A LOT of comport into "External GPS Settings", some starting with COM..X and others ports named GPD..X ..... What type of ports are??
(Ps: i have already installed tomtom again)
Did you try to disable AGPS?
I have only seen this problem when AGPS is enabled (via advanced config) too
Also the defualt GPS COM ports is 4 and baud rate of 4800 (should be no need to change this) and why mess with external GPS settings when the device has internal GPS?
I have same problem on iGO8 with AGPS enabled.
You guys are right! The A-GPS was ON (strange, i don't remember i've activated it)
If i play with the external gps app is because i would to share the same com port to 2 gps apps.....
BTW when i set the com4 in Hardware port, reopening the app it disappear.
Now i have Agps disabled, External gps app "void" and tomtom don't let me choose the comport (it switch from baud speed to mainscreen)
Hmm, I had no problem at all using GPS at standard settings for:
Igo
TrackMe
GoogleMaps
at the same time!
Riel said:
Hmm, I had no problem at all using GPS at standard settings for:
Igo
TrackMe
GoogleMaps
at the same time!
Click to expand...
Click to collapse
diamond has disabled agps out of the box.
Hmmm I had no problems the first couple of times I tried iGo when I first got the device. Then I tweaked it, enabled AGPS and all hell broke loose (presumably due to this setting, though not 100% sure since I changed lots of things). Disabled it on my own, trying to back-track, now it's better but I still got problems with GPS lost...
By the way, is there any use setting COM4 to high speeds? Does it reall improve performance?
I had the same problem after flashing the actual rom build from HTC club. I am currently sticking to this one in italian and no problem at all.
P.S.: Just noticed you're from my same city
All ok now, i suppose that if we leave blank the GPS port (no HW port) into first COM screen of external gps app, tomtom skip the comport settings screen, and don't allow you to choose another one.
I've Hardresetted my pda yesterday, and i've seen that out of the box, the diamond has COM4 selected by default.
I don't want to change anything now (i have no time in those days to do another Hard reset) BUT, if you have problems regarding the GPS COM Settings screen in tomtom, try to set the COM4 into GPS PORT (not hardware port) of the "External Gps" app.
hello everyone
i have the same problem of signal GPS lost and coming back after a few minutes of use (i use IGO 8), then lose again, then back again, and so on.
I installed the new flash rom from HTC eclub, (QMR-RUU_Diamond_HTC_FRA_1.93.406.1_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship.exe)
Even if i disable the a-gps using advance config, the problem is still there.
Do you think that problem comes from that new HTC ROM ?
Any solutions?
NO... I had the same problem on old ROM very rarely and solved with Quick GPS , I will see if the problem persist on new ROM...
I had this disconnecting problem too with Tomtom 7,
now with Bepe 0.98 and radio Radio v1.00.25.07, all is OK, no disconnect at all this morning ( 2 hours of GPS use ).
But I don't know what resolve the problem, Bepe's ROM or the new .07 radio
my diamond refuse to accept setting for hardware port and rate......
it always displayed the default (hardware none ,,port 4800)
and always intermittent gps signal...
can u help me?
hmh79 said:
my diamond refuse to accept setting for hardware port and rate......
it always displayed the default (hardware none ,,port 4800)
and always intermittent gps signal...
can u help me?
Click to expand...
Click to collapse
Never mind the setting. Is AGPS disabled?
yes its disabled...
A bit strange, mine works perfectly with iGo, it even updates the position (almost) continuously when in pedestrian mode.
Perhaps you could try an auto detect from your GPS program to reset the link. By the way, what soft are you using?
well im using garmin xt and navigon...garmin display that the program and hardware is com:4
thank u for being patient with me....
I know Garmin works on the Diamond, so I'm running out of ideas... I remember reading that some VOIP programs screw the GPS. Did you install any such program?
If not, what I would do is back up my contacts and calendar and do a hard reset to see if this solves the problem. A bit painful, but will certainly answer the question whether there is something wrong with your hardware or not.
well.. i have changed the rom to karmba version, and it works fine for the last 6 hours..
gps functioning well.
may be the fault was in my previous rom (SwiftBL-WWE-Diamond-ROM-v5-5-Lite)
thank you very much for your help
Hi everyone
I have spent a lots of hours searching for the answer to bad gps reception on diamond, through different forums.I was about to sell the diamond when I finally came with a solution and that is Hard Reset after each Rom flashing.
For a few days I could not get a gps fix, no matter what I did. I tried Quick gps, Gps tool , Google map, iGo8 and Garmin. Somewhere I read that it could be the Rom I am using. So today I flashed 4 different roms including Dutty's, bepe and panosha but no gps fix. Finally I did a Hard reset and viola, it found the satellites within 10 seconds inside near the window on all the different Gps softwares without any problem.
So here is the procedure:
***After a ROM flash finish the usual soft reset and stuff and then do a HARD RESET. Download the data through Quick Gps and your gps should work properly at its default settings.***
Actually I found that Diamond is faster than TYTNII for getting the Gps fix.
Now if the Cooks can find out what causes this behaviour so we do not have to do a hard reset after every new flash.
Please share the findings.
Cheers!!!
********* Ok I have been flashing all the new roms and Gps was not working even with the hard reset. Finally I flashed CT's Beta lite2 Rom, did a hard reset and viola Gps is working flawlessly for the last three days. This Rom is actually the fastest and very clean among all the other roms I tried ( no offence to all the other great Cooks ). Please try it and share your findings!
Well, now i know why i dun have GPS problems...
i hard-reset after each flash ... just a habit inherited while using artemis...
Hi, nice tip
When you had done a hard reset, is the GPS working fine after several reboot ?
It will be nice if someone on XDA or HTC find a solution
Yes its working fine since then and I have done several soft resets.
Fine here. The only thing that made the GPS not work for me was turning on A-GPS.
Doesn't work for me. I have changed my ROM to bElite 0.93, have done a hard reset, loaded quickgps data and still no fix after half an hour on the window.
Try going outside in the clear. If you get the fix then its the location of your window.
try using HTC GPS Tool, it fixed for me once:
http://forum.xda-developers.com/showthread.php?t=360477
install the cab, run it, then choose "Cold Start" let it run for awhile then try using your GPS software again.
Re: GPS Not Working
tararura said:
Hi everyone
I have spent a lots of hours searching for the answer to bad gps reception on diamond, through different forums.I was about to sell the diamond when I finally came with a solution and that is Hard Reset after each Rom flashing.
For a few days I could not get a gps fix, no matter what I did. I tried Quick gps, Gps tool , Google map, iGo8 and Garmin. Somewhere I read that it could be the Rom I am using. So today I flashed 4 different roms including Dutty's, bepe and panosha but no gps fix. Finally I did a Hard reset and viola, it found the satellites within 10 seconds inside near the window on all the different Gps softwares without any problem.
So here is the procedure:
***After a ROM flash finish the usual soft reset and stuff and then do a HARD RESET. Download the data through Quick Gps and your gps should work properly at its default settings.***
Actually I found that Diamond is faster than TYTNII for getting the Gps fix.
Now if the Cooks can find out what causes this behaviour so we do not have to do a hard reset after every new flash.
Please share the findings.
Cheers!!!
Click to expand...
Click to collapse
HI, ... Hard Reset,- you mean reformatting the internal storage as well? - i've done hard reset but still the gps can't fix location- says in HTC GPS tool - Mode 2: Not Fix
thanks
Mode 2: Not fix...
And the sattelites numbers show just #? Or u can see actual sattelite numbers?
Reason I'm asking is, if you just see #... then ur GPS is scr###d up and the cold start could really help.
If you do see the actual numbers, but no reception bars, then you have to get ourside into the clear sky. Be aware that nowadays windows are protective for keeping the heat of the sun outside. At the same time it keeps GPS for 95% out too.
akito said:
Mode 2: Not fix...
And the sattelites numbers show just #? Or u can see actual sattelite numbers?
Reason I'm asking is, if you just see #... then ur GPS is scr###d up and the cold start could really help.
If you do see the actual numbers, but no reception bars, then you have to get ourside into the clear sky. Be aware that nowadays windows are protective for keeping the heat of the sun outside. At the same time it keeps GPS for 95% out too.
Click to expand...
Click to collapse
Thanks akito- there's numbers-- as if it's a poor signal... same location in my window with the BT Gps receiver gives me 3D in Mode 2 almost instantly. - i'll keep trying. again thanks
You haven't been playing around with the GPS settings in the configuration of 'external GPS'? The standard settings are: GPS program port COM4 / Hardware port = none with a baud of 4800. Access tab should have GPS set to be managed automatically. Also, you have not enabled AGPS in any way like with a registry key or the advanced config program?
akito said:
You haven't been playing around with the GPS settings in the configuration of 'external GPS'? The standard settings are: GPS program port COM4 / Hardware port = none with a baud of 4800. Access tab should have GPS set to be managed automatically. Also, you have not enabled AGPS in any way like with a registry key or the advanced config program?
Click to expand...
Click to collapse
all is in default (Diamond Project Rom) as i just did a hard reset - a gps is disabled via advance config.
akito said:
Mode 2: Not fix...
And the sattelites numbers show just #? Or u can see actual sattelite numbers?
Reason I'm asking is, if you just see #... then ur GPS is scr###d up and the cold start could really help.
If you do see the actual numbers, but no reception bars, then you have to get ourside into the clear sky. Be aware that nowadays windows are protective for keeping the heat of the sun outside. At the same time it keeps GPS for 95% out too.
Click to expand...
Click to collapse
hi, nice tip
i have the same problem -> mode 2 : fix not vailble
I can see the satelite numbers, and there is some red in the reception bars (not for all, just 3), but wherever i run my navigation software (tomtom 6), why i cant get the signal GPS???? 20mins waiting, i think it is enough.
I had disabled AGPS
coca8888 said:
hi, nice tip
i have the same problem -> mode 2 : fix not vailble
I can see the satelite numbers, and there is some red in the reception bars (not for all, just 3), but wherever i run my navigation software (tomtom 6), why i cant get the signal GPS???? 20mins waiting, i think it is enough.
I had disabled AGPS
Click to expand...
Click to collapse
same probleme
solution for fix not vaible
the gps is broken ?
My problem is not the fix, but rather the lag and lack of precision while navigating...
I have more or less 5 seconds of lag, and the precision is awful...
If I use a BT external receiver connected to Diamond, than I don't have this problem...
It seems that the receiver is refreshing to less, or the communication between the receiver and the GPS software is too slow...
HastaSSSS
derkie said:
all is in default (Diamond Project Rom) as i just did a hard reset - a gps is disabled via advance config.
Click to expand...
Click to collapse
I've fixed my gps problem. I just tried to force change the gps port from settings>external gps from port 4 to port 6 and in my tomtom, i choose other receiver then tap port 6,was showing poor signal- i minimized tomtom, opened htc gps tool opened port 4 at 4800 cold start> gives me error message that the port is closed and it will force open nmea but still fail, in this part i tapped nav init.. then closed it- opened port 6 in cold start> showing all sat in #### instead of numbers. then closed it. then go to settings>external gps> then choose port 4, opened tomtom then went to gps configure and now change it to built in gps... i get full 3d 6 green bars indoor. all ok even after a hard reset. Thanks
Yeah...but how to solve the lag and accuracy issues...?...
HastaSSSS
s1rl4ncel0t said:
Yeah...but how to solve the lag and accuracy issues...?...
HastaSSSS
Click to expand...
Click to collapse
So far i dont have accuracy issue. i tried igo8 using bt receiver (SiRF III) compared it to the internal gps- it's just the same , internal gps loads even faster- In TomTom7- if i use bt receiver, some voice instructions is not complete unlike the internal gps which is flawless- maybe it's the rom/radio...
I don't have any problem
"Bonjour" (since I am french !!! )
I tried the GPS with TomTOM V7 = no problem
with garmin XT no pb
First idea
Within the programm window I have a "fast GPS" programme
Do you have this ?
Did you run it ?
Second idea
You should enable Agps in advanced config
On my diamond if I disable it doesn't work anymore
Third idea
Try to see if "GPS utilities" works
Google it it's a basic cab file for showing basic GPS (position, speed, elevation.... )
Let me know
Diamond FrencH Rom 1.37.406.1 FRE