Related
Does anyone know how to change the com port for Internal GPS to COM7 instead of COM4? I have Dell Navigation Software from my Dell Axium51v and was hoping I can use it on my Kaiser. Dell Navigation ext GPS is on COM7 and I believe the software keep wanting to search for COM7. Does anyone know if it will work at all? Any work around??
Any ideas is greatly appreciated!!!
start --> settings --> system --> external gps
can be changed there
look at the tabs to change it in the appropriate place
I tried your suggestion, but the software kept saying unable to locate GPS. The only configuration in Dell Navigation is Auto Dectect GPS.... and when I tried that it keep saying that unable to locate GPS. Any other ideas????
Thanks,
Is the GPS turned on?
GPS is turned on! If i tried it with MSN Live Search it can pick up the GPS find. But that if it is on COM4 default setting. I am using Dutty's V3 Final ROM. When I changed the GPS to COM7 it seem to idle along time (I think it froze) , so I had to soft reset. Once I am back in it's seem like it is on COM7. Should I tried Dutty's V4 Rom?
Thanks
f4yrinly said:
GPS is turned on! If i tried it with MSN Live Search it can pick up the GPS find. But that if it is on COM4 default setting. I am using Dutty's V3 Final ROM. When I changed the GPS to COM7 it seem to idle along time (I think it froze) , so I had to soft reset. Once I am back in it's seem like it is on COM7. Should I tried Dutty's V4 Rom?
Thanks
Click to expand...
Click to collapse
Run GPSTest.... and/or try a different radio 15.32 is working great for me
My device was working find with regards to GPS usage. I had to do a hard reset for some other issues. Now I can't get the GPS to work with TomTom or any other program where you specify the Com port.
Programs that work:
Live Search - Setting Windows Managed GPS Intermediate Driver
RunGps - Setting Windows Managed if you ask the program to find the port it will not find one. (Great Program)
Programs that don't work:
TomTom - Can't find the GPS whether I choose Internal or Other NMEA
GPS Test - Never finds the GPS
Any suggestions? Not really in the mood to do another hard reset but if folks think that will help I will try it. I have searched the forums and haven't found any specific answers to this.
This is an AT&T Tilt with the stock rom latest version from AT&T. No other modifications. I am not afraid to try editing the registry if need be.
Thanks,
Chris
bump.
Anyone?
did you install any gps software, i installed some crappy google maps knockoff and it borked my gps to where no program would connect had to hard reset my phone to get it to work again.
pdtp said:
did you install any gps software, i installed some crappy google maps knockoff and it borked my gps to where no program would connect had to hard reset my phone to get it to work again.
Click to expand...
Click to collapse
Nope. I have Live Search and RunGPS. Neither program has ever interfered with TomTom. Seems like something has gone wrong with the com port that the internal gps uses.
After a hard reset your first lock will take a little longer. How long have you left tomtom running to be able to get a lock? It might say no gps device for a goot 10 min before it locks on.
Also when you start up tomtom is the orange light blinking?
fone_fanatic said:
After a hard reset your first lock will take a little longer. How long have you left tomtom running to be able to get a lock? It might say no gps device for a goot 10 min before it locks on.
Also when you start up tomtom is the orange light blinking?
Click to expand...
Click to collapse
No lights. Running for 20 min and still can't find the device when set to internal gps. Thanks for the info though it was worth a try.
I have TomTom 6 and it is set to "Other BlueTooth GPS receiver" and Com4.
In Windows Mobile, Start, Settings, System tab, External GPS, Program port is Com4, GPS hardware port is (none), Baud 4800.
kierandill said:
I have TomTom 6 and it is set to "Other BlueTooth GPS receiver" and Com4.
In Windows Mobile, Start, Settings, System tab, External GPS, Program port is Com4, GPS hardware port is (none), Baud 4800.
Click to expand...
Click to collapse
That didn't work either. I am going to do another hard reset this weekend and see what happens. I will install TomTom before anything else.
Thanks for all the suggestions. I gave up and did a hard reset. First thing I installed was TomTom. It now appears to work as previously. Not sure what took out the com port but now all is well.
live searh????
hi i upgraded my phones operating sistem or i shal say someone else did it for me other wise i would be able to figure this out my self. i cant get livesearch to run in the new windows mobile 6.1 why???? any one? any one????
I purchased a tilt about 2 weeks ago and have been using the gps fine with navadi htc gps tool, ms live search, and google maps. In fact im on a trip in san diego today and i was using the gps earlier today with google maps. I was lost for a while and i couldnt get the gps to work google maps wouldnt lock onto a sattelite, next i went into the windows settings and it wouldnt save anything under the hardware tab. After searching the net and not getting anywhere i decided to run clear storage to reset the tilt. I reset it and now google maps says it cant find a gps device at all. So i installed and ran the htc gps tool. When the device is set to communicate on com 4 htc gps tool says open com port failed. When i change the windows options and htc tool options to communicate on com 3, htc gps tool gives me no errors but also doesnt report any data being recieved. Im really hoping the gps isnt broke i didnt do anything to the phone physically to damage the gps but i have been running the phone at 57600 baud instead of 4800. If anyone has any experince with this gps unit or has had this problem i would appreciate any help. Also if its agreed this is just a phone problem is there usually a warantee or should i use the at and t insurance i bought whats the best rout here im not sure if i saved the phones recipt.
learn to use the enter button on your keyboard...and try turning agps off
i just checked agps it is off
[HKEY_LOCAL_MACHINE\Software\HTC\SUPL AGPS]
EnableAGPS=0
is there anything else i could try. Like i said i did clear the storage so everything should be back to default settings.
problem solved
boorishid said:
problem solved
Click to expand...
Click to collapse
What did you do?
TotalAxim said:
What did you do?
Click to expand...
Click to collapse
Instead of just saying "problem solved", how about letting the rest of us know what happened....sorry rant over
acually im not quite sure what i did. I just set everything back to defualt in the gps settings com 4 at 4800 baud and the gps tool was able to communicate with the gps again.
Im just not quite sure what i did, i mean orginally it wasnt working with the default settings .
Also ive been having a real hard time getting gps locks lately i find myself having to use gps tool to constantly clear the gps memory, then i have to reopen it and preform a hot start. I never had to do tat befhore this problem. I have regular quick gps updates too. When i open gps tool it just tells me mode 2 fix not available. This happens after using google maps 2 or 3 times.
boorishid said:
acually im not quite sure what i did. I just set everything back to defualt in the gps settings com 4 at 4800 baud and the gps tool was able to communicate with the gps again.
Im just not quite sure what i did, i mean orginally it wasnt working with the default settings .
Also ive been having a real hard time getting gps locks lately i find myself having to use gps tool to constantly clear the gps memory, then i have to reopen it and preform a hot start. I never had to do tat befhore this problem. I have regular quick gps updates too. When i open gps tool it just tells me mode 2 fix not available. This happens after using google maps 2 or 3 times.
Click to expand...
Click to collapse
Have you been playing with the "External GPS" application? That's known to cause serious problems with the GPS, even requiring a hard reset (although I saw work being done to restore some registry settings to default to avoid needing the hard reset)
I dont think so im not even sure what the external gps application is. I use a tilt so i dont have all the cool htc stuff ive downloaded and installed google maps, ms live search, quickgps, and the navadi htc gps tool. I did a hard reset and am still having trouble locking the gps in with out using gps and clearing the gps.
Strange part is i was on a trip and google maps was working fine all day and for weeks before the trip. All the sudden it just stoped getting a lock. Didnt drop the phone change any software settings or anything.
you most likely didnt have to do a hard reset...to get a good gps lock you need to download satelite information through QuickGps every 6 days but i do it everytime i use my gps through live search to get a god satelite fix everytime. and with the externa gps settings i set it to any port usually com 0 and never mess with the software tab , only hardware...the baud rates too you dont need to mess with that, just choose a com, quickgps download and soft reset u should always get a fix...if thir are still problems search for gps tweaks
moegdaog said:
you most likely didnt have to do a hard reset...to get a good gps lock you need to download satelite information through QuickGps every 6 days but i do it everytime i use my gps through live search to get a god satelite fix everytime. and with the externa gps settings i set it to any port usually com 0 and never mess with the software tab , only hardware...the baud rates too you dont need to mess with that, just choose a com, quickgps download and soft reset u should always get a fix...if thir are still problems search for gps tweaks
Click to expand...
Click to collapse
....or don't touch the application at all and use com4?
Hi all, yesterday i've changed the "external gps settings":
COM8 For virtual GPS port and COM 4 as Hardware GPS port, baud 9600.
Today i was using my GPS the first time after the settings descripted before...
The GPS Works, but at regular intervals of 2 sec, then stops for 10 sec (No GPS Found with Tomtom) and works again.....
Now i have 3 questions:
1) Can i solve this WITHOUT an Hard Reset??
2) If i disable the Virtual com port, tomtom DON'T let me choose another COMport (it skips the Comport configuration page) and, when it allows me to select the right port, the COM4 isn't there
3) There are A LOT of comport into "External GPS Settings", some starting with COM..X and others ports named GPD..X ..... What type of ports are??
(Ps: i have already installed tomtom again)
Did you try to disable AGPS?
I have only seen this problem when AGPS is enabled (via advanced config) too
Also the defualt GPS COM ports is 4 and baud rate of 4800 (should be no need to change this) and why mess with external GPS settings when the device has internal GPS?
I have same problem on iGO8 with AGPS enabled.
You guys are right! The A-GPS was ON (strange, i don't remember i've activated it)
If i play with the external gps app is because i would to share the same com port to 2 gps apps.....
BTW when i set the com4 in Hardware port, reopening the app it disappear.
Now i have Agps disabled, External gps app "void" and tomtom don't let me choose the comport (it switch from baud speed to mainscreen)
Hmm, I had no problem at all using GPS at standard settings for:
Igo
TrackMe
GoogleMaps
at the same time!
Riel said:
Hmm, I had no problem at all using GPS at standard settings for:
Igo
TrackMe
GoogleMaps
at the same time!
Click to expand...
Click to collapse
diamond has disabled agps out of the box.
Hmmm I had no problems the first couple of times I tried iGo when I first got the device. Then I tweaked it, enabled AGPS and all hell broke loose (presumably due to this setting, though not 100% sure since I changed lots of things). Disabled it on my own, trying to back-track, now it's better but I still got problems with GPS lost...
By the way, is there any use setting COM4 to high speeds? Does it reall improve performance?
I had the same problem after flashing the actual rom build from HTC club. I am currently sticking to this one in italian and no problem at all.
P.S.: Just noticed you're from my same city
All ok now, i suppose that if we leave blank the GPS port (no HW port) into first COM screen of external gps app, tomtom skip the comport settings screen, and don't allow you to choose another one.
I've Hardresetted my pda yesterday, and i've seen that out of the box, the diamond has COM4 selected by default.
I don't want to change anything now (i have no time in those days to do another Hard reset) BUT, if you have problems regarding the GPS COM Settings screen in tomtom, try to set the COM4 into GPS PORT (not hardware port) of the "External Gps" app.
hello everyone
i have the same problem of signal GPS lost and coming back after a few minutes of use (i use IGO 8), then lose again, then back again, and so on.
I installed the new flash rom from HTC eclub, (QMR-RUU_Diamond_HTC_FRA_1.93.406.1_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship.exe)
Even if i disable the a-gps using advance config, the problem is still there.
Do you think that problem comes from that new HTC ROM ?
Any solutions?
NO... I had the same problem on old ROM very rarely and solved with Quick GPS , I will see if the problem persist on new ROM...
I had this disconnecting problem too with Tomtom 7,
now with Bepe 0.98 and radio Radio v1.00.25.07, all is OK, no disconnect at all this morning ( 2 hours of GPS use ).
But I don't know what resolve the problem, Bepe's ROM or the new .07 radio
my diamond refuse to accept setting for hardware port and rate......
it always displayed the default (hardware none ,,port 4800)
and always intermittent gps signal...
can u help me?
hmh79 said:
my diamond refuse to accept setting for hardware port and rate......
it always displayed the default (hardware none ,,port 4800)
and always intermittent gps signal...
can u help me?
Click to expand...
Click to collapse
Never mind the setting. Is AGPS disabled?
yes its disabled...
A bit strange, mine works perfectly with iGo, it even updates the position (almost) continuously when in pedestrian mode.
Perhaps you could try an auto detect from your GPS program to reset the link. By the way, what soft are you using?
well im using garmin xt and navigon...garmin display that the program and hardware is com:4
thank u for being patient with me....
I know Garmin works on the Diamond, so I'm running out of ideas... I remember reading that some VOIP programs screw the GPS. Did you install any such program?
If not, what I would do is back up my contacts and calendar and do a hard reset to see if this solves the problem. A bit painful, but will certainly answer the question whether there is something wrong with your hardware or not.
well.. i have changed the rom to karmba version, and it works fine for the last 6 hours..
gps functioning well.
may be the fault was in my previous rom (SwiftBL-WWE-Diamond-ROM-v5-5-Lite)
thank you very much for your help
Hello all,
My GPS was working just fine with several applications like GPSed, the 'new' experia camera with geotagging and so on. Recently I installed CoPilot Live 8 and now wm is not allocating the right port to be used for GPS. Sometimes it just activates my bluetooth. I reset my device to its manufacturer defaults, but still it's not very stable. I also opened a ticket with ALK (CoPilot) support, but I'm hoping that someone has a tip on how I can restore wm. If I let wm manage my GPS settings, most appliactions, do not get the GPS signals. Google maps seems actually be the only one still working, meaning my GPS is not physically broken.
Is there any way I can tweak wm6.1 again so that it will find the correct comport to use for the GPS?
Hope anyone can help as this is quite annoying.
Thanks in advance,
Dan.
There is setting for that. It's called External GPS.
You can set which comport will internal GPS use there too, it's the first page.
Also each GPS application should at least have settings for selection the com port. Some even support native WM api.
Thanks
Thanks for your reply.
I tried that and GPS should be working on com4, but still I got issues with some applications I didn't use to have (gps related).
I will try to seek if there is another com port wich will work fine for all app's.
I was hoping I could keep it as being 'managed' by wm.
Thanks again for your reply!
Dan.
I don't understand that well too .. anyway here is my theory.
Managed by windows may mean two things.
1) Special treatment of com port. Normally only one application can use one com port. And you sometimes want to use more apps form GPS at once. So this specially handles the com port of GPS so it is available multiple times. You can turn this on on third tab of the GPS settings app mentioned above.
2) Using WM driver for GPS, not com port. There is something like that, Google maps can use port or 'windows managed', also Garmin software has either com or 'GPS intermediate driver'. Anyway this is set on application side. When you use this, no com port matters. However if you use com port, it must be the same number as preset on GPS settings, standard is com 4.
There are also other problem with GPS. Try this app:
http://www.chartcross.co.uk/products/WM00002_details.asp
It's simple GPS tester. Try that first, it finds the port and baud-rate of com connected GPS.
Also sometimes GPS does not work in any program, and it can be fixed by forcing re-download of Quick GPS data. Once I had situation where GPS kept loosing signal every 5 seconds, and forced re-download fixed it. So the Quick GPS data can get somehow bad, and it may cause problems too.