Related
Hello Everybody,
My Qtek 9100, after a upgrading process, don't recognise Usb connection.
The Qtek works normally but only my Usb Connection don't work to charge the battery and to connect to the Pc...
Could you help me, please?
Thanks and best regards.
Does it not work with your wall carger either? What version of active sync are you using what's your device info? (rom, ipl/spl, etc....)
there is a reg tweak. do a search for usb charging registry tweak
Thanks to everybody for the answers...
My qtek don't work neither with wall charger..
I charge my battery with a home-made cut Usb cable connecting directly the battery.
I Use ActiveSync 4.2.
IPL 1.03
SPL 1.03.0000
OS 2.18.9.1.
Yesterday I searched in regisrty tweak usb charging...
HKLM\Drivers\BuiltIn\usbfndrv\EnableUsbCharging = 1 (enable charge)
Maybe with the Upgrade i have destroyed the Wizard !?!?!
I don't ever know what I can do!!
Bye
If you haven't fixed the problem already, try switching it off , pull out your battery, insert the charger and after insert the battery
See if it starts charging
good luck
By the way, what ROM you currently have installed ?
sikario said:
Thanks to everybody for the answers...
My qtek don't work neither with wall charger..
I charge my battery with a home-made cut Usb cable connecting directly the battery.
I Use ActiveSync 4.2.
IPL 1.03
SPL 1.03.0000
OS 2.18.9.1.
Yesterday I searched in regisrty tweak usb charging...
HKLM\Drivers\BuiltIn\usbfndrv\EnableUsbCharging = 1 (enable charge)
Maybe with the Upgrade i have destroyed the Wizard !?!?!
I don't ever know what I can do!!
Bye
Click to expand...
Click to collapse
yeah
It looks like You did't CID unlock before upgrade or You upgraded with G4 rom (without IPL/SPL). You CAN'T HAVE OS 2.xx on IPL/SPL 1.xx
Now You have to back to old ROM, CID unlock him and upgrade with G3 ROM (with IPL/SPL).
Or maybe (corect me if I'm wrong), if You are sure CID is unlocked just upgrade with G3 ROM
maymaymay said:
yeah
It looks like You did't CID unlock before upgrade or You upgraded with G4 rom (without IPL/SPL). You CAN'T HAVE OS 2.xx on IPL/SPL 1.xx
Now You have to back to old ROM, CID unlock him and upgrade with G3 ROM (with IPL/SPL).
Or maybe (corect me if I'm wrong), if You are sure CID is unlocked just upgrade with G3 ROM
Click to expand...
Click to collapse
I think that i had CID UNLOCK... my Rom was 1.8.xx German and now I have Upgraded it in Italian language.
I would to back to my old rom, but without USB Connection, it's impossible!
Maybe the Rom that I've installed is too much new for my device....
and Maybe only the assistance can be solved the problem...
I give up!
Bye
sikario said:
I think that i had CID UNLOCK... my Rom was 1.8.xx German and now I have Upgraded it in Italian language.
I would to back to my old rom, but without USB Connection, it's impossible!
Maybe the Rom that I've installed is too much new for my device....
and Maybe only the assistance can be solved the problem...
I give up!
Bye
Click to expand...
Click to collapse
Just because it is not charging or connecting to Activesync does not mean the USB connection isn't working. While you are on the bootloader screen (red, green, blue screen) plug in your USB cable. If the letters USB appear in the corner you have an active USB connection. From there flash your phone with a 2.x carrier rom (preferably from your own carrier). Then follow the instructions in the unlocking Sticky thread (don't skip any steps no matter how wierd or out of place they might sound--they are all in there for very specific reasons and virtually everyone that follows them don't have issues) Then feel free to upgrade to whichever compatible rom you want. Just be aware that when flashing, a mistake can ruin your phone. Make sure you are prepared for this to happen when considering whether or not you really NEED to flash your device.
sikario said:
I think that i had CID UNLOCK... my Rom was 1.8.xx German and now I have Upgraded it in Italian language.
I would to back to my old rom, but without USB Connection, it's impossible!
Maybe the Rom that I've installed is too much new for my device....
and Maybe only the assistance can be solved the problem...
I give up!
Bye
Click to expand...
Click to collapse
NO.
Now You have to enter the bootloader by keeping camera button and soft reset, then conect USB and You can upgrade.
THANKS to everybody for the suggestions!!
I will try to enter the bootloader in my device (camera button and soft Reset)..
and i read well the "unlocking Sticky thread"....
I hope to do all the things in good way....
......
Thanks........
I enter Bootloader by keeping "Camera button" and "soft reset" with the little pen... but don't appear the Bootloader Screen...
Is it normal?
sikario said:
I enter Bootloader by keeping "Camera button" and "soft reset" with the little pen... but don't appear the Bootloader Screen...
Is it normal?
Click to expand...
Click to collapse
Try turning the phone completely off (hold down the power button until is shuts down)
Then press and hold both the Voice command key and the camera key.
While they are both held down press and release the power button.
Might work with the soft reset button but I always use the main power button.
Zzan said:
Try turning the phone completely off (hold down the power button until is shuts down)
Then press and hold both the Voice command key and the camera key.
While they are both held down press and release the power button.
Might work with the soft reset button but I always use the main power button.
Click to expand...
Click to collapse
OK Zan!
I held both keys and in the same time "on/off Switch"...
but my device only light on the orange led in the right above...
I am trying to do and do.....
Thanks for now!
sikario said:
OK Zan!
I held both keys and in the same time "on/off Switch"...
but my device only light on the orange led in the right above...
I am trying to do and do.....
Thanks for now!
Click to expand...
Click to collapse
Try to keep camera button, then press SR keeping camera button untill bootloader shows.
ok...
with the phone off, hold camera button and key button... after press and release on/off button...
Bootloader is charged!!
tomorrow i will try to re-flash my device...
maybe i will ask you other things....
Bye
I tried new radio 1.08.25.20 after few days I decide go back to 1.0.25.05. After flashing program written "different device id". Now is my diamond dead cant even get bootloader. I used hard spl before flashing. I flashed my phone so many times and nothing happend, but now is my phone absolutely dead. just black screen, I tried power button, volume down and reset but doesnt work. Can anyone help my?
_smejo said:
I tried new radio 1.08.25.20 after few days I decide go back to 1.0.25.05. After flashing program written "different device id". Now is my diamond dead cant even get bootloader. I used hard spl before flashing. I flashed my phone so many times and nothing happend, but now is my phone absolutely dead. just black screen, I tried power button, volume down and reset but doesnt work. Can anyone help my?
Click to expand...
Click to collapse
What do u mean "different device id" ?
So there is no power to the device? (take out the battery & place it back in).
band27 said:
What do u mean "different device id" ?
So there is no power to the device? (take out the battery & place it back in).
Click to expand...
Click to collapse
I have no idea what it is mean, but i already tried take out battery....
try
take out the battery and wait about 5-10min then put it back again
Aqrab said:
try
take out the battery and wait about 5-10min then put it back again
Click to expand...
Click to collapse
I already did it
Try - Volume Down and Power Button.
Highlife22 said:
Try - Volume Down and Power Button.
Click to expand...
Click to collapse
doesnt work as well
Are you sure that the battery have power ?
Sometimes flashing a radio can brick your phone, not much you can do I don't think.
--- mistaken
Hello guys!
Sorry my bad english!
I installed to WM6.5 ROM in my HTC phone in february. I used may months, all day...
And yesterday i switch on my phone, put on my desk, and today, i see , that the screen get white. It dont do nothing, just get white. I restart the phone many times, and remove the battery, the phone do this: i enter my security password (i locked my phone) and then its go to white screen, and dont do nothing. And if i swich on my phone, and dont do nothing, its just go to frozen...
A dont install nothing my phone since many weeks.
Maybe, the WM6.5 ROM was out of date???
I dont know, but if i connected my phone to PC, the PC isnt known my device...
I dont do nothing, my phone was dead, and im a big trouble (((((((((((
PLEASE HELP ME!
did u try to hard reset it?
can u still enter bootloader mode?
if u can still enter bootloader then try flash another ROM
I think there is a timebomb in the Rom you are using.
Go to bootloader menu, connect to usb, and try to flash an other rom by installing via Windows.
okay, but what is the hard reset? Is that a red button on my device back?
if it is, i try this, but it isnt solve my problem.
and how i can go the bootloader menu?
thank a lot.
Don't worry...just try the hardreset:
1. With the device turned off, press and hold the VOLUME UP and VOLUME DOWN buttons, then briefly press the POWER button.
2. Continue pressing the VOLUME UP and VOLUME DOWN buttons until you see this message on the screen:
This operation will delete all your personal data, and reset all settings to the manufacturer default settings. Press VolUp to restore manufacturer defaults, or press other keys to cancel.
3. Release the VOLUME UP and VOLUME DOWN buttons.
4. Press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.
If this does not work...just flash another rom...it really seems to have this timebomb issue...you don't have a hardware problem...it's just the software.
here's a video instruction for the hard reset:
http://www.youtube.com/watch?gl=DE&hl=de&v=Eqg8XFJyHBY
thanks a lot, the hard reset worked!!!
thanks!!!
i will flash a new 6.5 ROM.
VorosAdam said:
Hello guys!
Sorry my bad english!
I installed to WM6.5 ROM in my HTC phone in february. I used may months, all day...
And yesterday i switch on my phone, put on my desk, and today, i see , that the screen get white. It dont do nothing, just get white. I restart the phone many times, and remove the battery, the phone do this: i enter my security password (i locked my phone) and then its go to white screen, and dont do nothing. And if i swich on my phone, and dont do nothing, its just go to frozen...
A dont install nothing my phone since many weeks.
Maybe, the WM6.5 ROM was out of date???
I dont know, but if i connected my phone to PC, the PC isnt known my device...
I dont do nothing, my phone was dead, and im a big trouble (((((((((((
PLEASE HELP ME!
Click to expand...
Click to collapse
I'm curious wich rom you use?
you CHICKEN >"<
quack quack
vodanh2025 said:
you CHICKEN >"<
Click to expand...
Click to collapse
lol chicken?
Sorry, but its dont solve my problem, all 6.5 ROMs go to freeze a few sec/minutes when i use... And the phone function and network connection also dont work. Big trouble (
and all rom go to 256 depth colour screen, when im swich on my Blackstone...
but when i push the power button, and push again, the screen go to normal.
but, if i use the device, go to freeze all of ROMs...
brühühühüüü
VorosAdam said:
and all rom go to 256 depth colour screen, when im swich on my Blackstone...
but when i push the power button, and push again, the screen go to normal.
but, if i use the device, go to freeze all of ROMs...
brühühühüüü
Click to expand...
Click to collapse
Flash the latest Hard SPL http://forum.xda-developers.com/attachment.php?attachmentid=179550&d=1240516932
I'm curious, what way did you flash these roms. Are you using USPL or HSPL or have you just flashed these straight from stock?
i used an older february HSPL, now, i will put on my device the latest version, thanks the idea!
VorosAdam said:
i used an older february HSPL, now, i will put on my device the latest version, thanks the idea!
Click to expand...
Click to collapse
2 versions of HSPL, 1.14 & 1.56. You will need HSPL 1.56 on your device to be able to use roms based on 1.56+
thanks a lot, i flash the new HSPL, and now, all phone function back to normal!!!
THANKS!!
Impressed by the support
Hello,
I was watching this thread continously and whenever i try to jump in to help you with tips about flashing, someone would have done it already.
I feel somewhat releived to know that your Kit(d) is back on track.
I like this forum very much not just for the solutions but also for the people's attitude.
Hey Guyz...Can anyone tell me what you mean by a BOOTLOADER??? I mean I have tried to find it out but cant seem to get what it is...is it the startup screen or what??? Or does it mean i need to go to the hard reset screen??? PLEASE HELP AS I NEED TO UPGRADE MY PHONE'S ROM TODAY....THANKS FOR YOUR HELP AND SUPPORT IN ADVANCE
Well, if you press the powerbutton and the volume-down key you´ll find out
Read this:
http://forum.xda-developers.com/showthread.php?t=505377
And to next time, read the wiki/forum before posting.
barbapappa_86 said:
Well, if you press the powerbutton and the volume-down key you´ll find out
Read this:
http://forum.xda-developers.com/showthread.php?t=505377
And to next time, read the wiki/forum before posting.
Click to expand...
Click to collapse
Thanks for replying...and YES i was on that page, but it is not written anywhere what BOOTLOADER MEANS. Neways...thx for ur help...SORTED OUT A GREAT DEAL OF TROUBLE FOR ME... ;-)
Hello xda, so yet another person took the plunge into flashing a rom. Im not sure what I did that was wrong because the install went perfect, it made it to 100 percent and restarted my phone like it was all well and good, but it wasnt. It just sits there perpetually restarting. Believe me I have been looking unfortunately, I didn't seem to find anything that helped. From the threads I read it sounds like I can just go to the boot loader, plug in my phone, then place a stock rom from alltel on my internal storage and flash that, or maybe I was mistaken with what I read. Either way I can't get that to work I can get to the boot loader and hook it to my computer, and the computer will say something connected, but it doesn't show up as a removable storage device or anything. This is the rom I used http://forum.xda-developers.com/showthread.php?t=553844 this is also the tutorial that I used http://forum.ppcgeeks.com/showthread.php?t=36062
Please, please give me some help.
me too
Anyone have any ideas? I tried using the HardSPL from here:
http://forum.ppcgeeks.com/showthread.php?t=35839
and I tried may different ROMs with the same problem... So i don't think it's the ROM.
Thanks in advance!
i was able to 'unbrick' my phone...
1. http://forum.ppcgeeks.com/showthread.php?t=35839, get the 0.57 version
2. load the bootloader
3. plug the phone to the computer
4. go to sprint.com and get the Rom from them and just use their exe
now it's back to WM6.1
So i guess the problem is that there's not WM6.5 ROMs for CDMA diamonds yet?
score3 said:
So i guess the problem is that there's not WM6.5 ROMs for CDMA diamonds yet?
Click to expand...
Click to collapse
I don't know how offical it is, but I have loaded WM6.5 on my Sprint CDMA Diamond just fine.
Alright thank you that worked, I thought I was going to have a diamond shaped paper weight for a minute. I do believe that there are indeed 6.5 roms for the diamond, but I have no idea why this rom didn't work. Thanks for the help.
so I got mine to work with a wm6.5 rom.
this is what i did:
1. http://forum.ppcgeeks.com/showthread.php?t=35839, get the 0.57 version
2. then get this wm6.5 ROM: http://forum.ppcgeeks.com/showthread.php?t=74084
this ROM is awesome!
Hope that works for you too.
You Bricked your Diamond
My Diamond bricked the other day and it wouldn't load or allow me to do a reset on it. I found a way to manually hard reset the device.
Hold the power button, the down volume button, and the enter button(the circled button) at the same time (continue to hold) then press the reset button. countinue holding the three buttons until a white screen comes up telling you to press volume up to reset device to original settings. press the volume up and it will reset. Now set up your device and immediately active sync and put a new Rom on the device
Bmagee4716 said:
My Diamond bricked the other day and it wouldn't load or allow me to do a reset on it. I found a way to manually hard reset the device.
Hold the power button, the down volume button, and the enter button(the circled button) at the same time (continue to hold) then press the reset button. countinue holding the three buttons until a white screen comes up telling you to press volume up to reset device to original settings. press the volume up and it will reset. Now set up your device and immediately active sync and put a new Rom on the device
Click to expand...
Click to collapse
Yes thats pretty important to know when you are messing with roms, also make sure to note the boot loader screen which is reset, back, vol down, and power. That is how I fixed my phone. This tutorial is a nice tutorial to look over. http://forum.ppcgeeks.com/showthread.php?t=36062
www.everythingdiamond.info/ this site has cdma versions theyre pretty good
Yeah I actually got my latest rom from there, thanks for all the help everyone you were a god send
check everythingdiamond.info or ppcgeeks.com . Both of those sites have stickies dealing with this and all the roms you'll find there are for cdma phones.