Help! phone won't start...please! - Wing, P4350 Herald Upgrading

hey, im a newbie, and I need help...
I was trying to install TouchIT so I downloaded the applications needed from a zip file I found here on the website...
I installed ASerg Policies, Cert_spcs, and Enablerapi and did a soft reset...cause I thought I needed all that....
...than I tried to run "1__UPGRADE_ROM" and in the middle of that process, i dropped my phone, and caught it b the cable, so it got disconnected, and it gave me an error message...the screen then froze so I tried a soft reset, and it got stuck on the T-Mobile screen....I waited a long time, than did a Hard Reset, and it is still stuck on the T-Mobile screen....I can't even wake up tomorrow cause I use my phone as my alarm clock...but I have no clue what to do...can anyone help?
"run the official RUU FROM HTC" I don't really know what this means, ..but I think I need to be connected to the computer to do that, and my phone is not even doing that...
thanks for ur help....

run the official RUU FROM HTC >> download the official ROM from HTC or from the XDA Dev FTP.
Turn on your phone on bootloader mode ( see the wiki to do that ) and run the ROM Installer.
If you have already installed the HardSPL you must extract the installer of the official ROM ( with WinRAR for example ) and delete the "SPL.nbh" file. Then run "ROMUpdateUtility.exe" to flash your phone.
Have fun

Please do not cross post. I answered you in the other post. Please do a search on "official brick" and set it to threads created by me, ivanmmj.

Related

xperia upgrading problem

hello guys, as i have posted in other threads but no one gave me any soultion to my problem so im starting this thread.
ok i have xperia purchased from UK.
im trying hard to use jack's rom 1.07.
i have done hard spl..i started X1_HardSPL, some message showed on xperia i click yes, it restarted my device. and X1_HardSPL gave me error that it cant connect to my phone...i put my device in bootloader mode and it was showing this on colour screen:
KOVS110
SPL-0.72.0000
MicroP1-787
MicroP2-787
then i used the sd card way..i put the jack's rom file in the card after formatting it with fat32 format..i put the device in bootloader and after the colour screen it shows LOADING and i waited for an hour but nothing happen..
2nd way i used was i ran hardspl file again in a folder, it created some temporary files, i renamed the jack's rom to RUU_Signed.nbh and overwrite the file in hardspl folder.....it again restarted my device to bootloader and after coloured screen it showed LOADING and thats it..nothing else..and hardspl file running on pc gave me 260 or 262 error i cant remember..
so anyone kindly tell me what im doing wrong?and how to fix this
thanx
najaf363 said:
hello guys, as i have posted in other threads but no one gave me any soultion to my problem so im starting this thread.
ok i have xperia purchased from UK.
im trying hard to use jack's rom 1.07.
i have done hard spl..i started X1_HardSPL, some message showed on xperia i click yes, it restarted my device. and X1_HardSPL gave me error that it cant connect to my phone...i put my device in bootloader mode and it was showing this on colour screen:
KOVS110
SPL-0.72.0000
MicroP1-787
MicroP2-787
then i used the sd card way..i put the jack's rom file in the card after formatting it with fat32 format..i put the device in bootloader and after the colour screen it shows LOADING and i waited for an hour but nothing happen..
2nd way i used was i ran hardspl file again in a folder, it created some temporary files, i renamed the jack's rom to RUU_Signed.nbh and overwrite the file in hardspl folder.....it again restarted my device to bootloader and after coloured screen it showed LOADING and thats it..nothing else..and hardspl file running on pc gave me 260 or 262 error i cant remember..
so anyone kindly tell me what im doing wrong?and how to fix this
thanx
Click to expand...
Click to collapse
did you do this (prefereble on an XP machine)
Phone Synced with PC
run X1_HardSPL.exe
follow on screen instruction, including after getting the drivers installed on you xp or vista machine installed, so the hardSPL will make the phone in bootloader and make sure it says 100% done on you xperia. and XP VISTA
then put inte bootloader holding down volyme button and power until tricolor screen is shown, and make sure that the imgage.nbh file is named correctly.
'
then it should work.
the most common failure is that the hardspl isnt installed correctly.
najaf363 said:
hello guys, as i have posted in other threads but no one gave me any soultion to my problem so im starting this thread.
ok i have xperia purchased from UK.
im trying hard to use jack's rom 1.07.
i have done hard spl..i started X1_HardSPL, some message showed on xperia i click yes, it restarted my device. and X1_HardSPL gave me error that it cant connect to my phone...i put my device in bootloader mode and it was showing this on colour screen:
KOVS110
SPL-0.72.0000
MicroP1-787
MicroP2-787
then i used the sd card way..i put the jack's rom file in the card after formatting it with fat32 format..i put the device in bootloader and after the colour screen it shows LOADING and i waited for an hour but nothing happen..
2nd way i used was i ran hardspl file again in a folder, it created some temporary files, i renamed the jack's rom to RUU_Signed.nbh and overwrite the file in hardspl folder.....it again restarted my device to bootloader and after coloured screen it showed LOADING and thats it..nothing else..and hardspl file running on pc gave me 260 or 262 error i cant remember..
so anyone kindly tell me what im doing wrong?and how to fix this
thanx
Click to expand...
Click to collapse
DO NOT I REPEAT
DO NOT
use the hardspl custom RUU for flashing roms.
this is from the 1st post of the HARDSPL thread.
http://forum.xda-developers.com/showthread.php?t=431218
NOTE 4: do not use this RUU to flash anything else! this is only intended for flashing the Hard-SPL. use Xperia CustomRUU to flash other ROM images. for example this version: http://rapidshare.com/files/164933503/X1_CustomRUU.zip
Click to expand...
Click to collapse
IF you have finished hard-spl properly it should say 0.72.Olinex, I'd suggest doing hardspl all over again
thanx bro for replying...during hard spl process it never asked for any drivers, i will try this on xo machine and see what happens,
and i dont understand about customs roms, jack's rom is a custom rom right? so which hard spl file do i need ?
najaf363 said:
thanx bro for replying...during hard spl process it never asked for any drivers, i will try this on xo machine and see what happens,
and i dont understand about customs roms, jack's rom is a custom rom right? so which hard spl file do i need ?
Click to expand...
Click to collapse
do the SD WAY, but remember to rename xxxxx.nbh to kovskimg....nbh otherwise it wont load it, se sticky post here in ropm section.
the driver issue is for XP AND VISTA when still in tricolor screen thn vista will install driver needed for hardspl to work (to recognise the device), as i stated the most common is that the hardspl isnt correctly installed.
hope you got it bro..
It sounds like you're getting confused between RUU and NBH
Ruu is the process for upgrading your phone with a new rom.
RUU stands for
Rom
Upgrade
Utility
nbh is the actual rom
there's only one Hard SPL available in the hardspl thread.
Run that again and let it complete, it should work from booloader mode on your phone.
when that is finished and your device in bootloader says 0.72.olipro then you can flash a rom.
If you use the SD Card method the whatever ROM file you choose must be called KOVSimg.nbh and be in the main section (root) of the SD card.
If you want to flash from desktop take the SD card out first.
Download the RUU I linked to in my last post. Extract that and make sure the nbh rom is called RUU_signed.nbh put it inthe ruu folder then start the RUU process.
smaberg said:
do the SD WAY, but remember to rename xxxxx.nbh to kovskimg....nbh otherwise it wont load it, se sticky post here in ropm section.
the driver issue is for XP AND VISTA when still in tricolor screen thn vista will install driver needed for hardspl to work (to recognise the device), as i stated the most common is that the hardspl isnt correctly installed.
hope you got it bro..
Click to expand...
Click to collapse
one too many ks in kovsimg there mate.
thanx guys for replies. i have managed to install the drivers and then i run the hardspl and now its showing :
KOVS110
SPL-0.72.0LINEX
MICROP1-787
MICROP2-707
now i hope it should upgrade it.before doing somthing i want to know after upgrading to jack's rom, the XPERIA logo that comes when starting the device will keep on showing right? the new rom will not remove it?
thanx
najaf363 said:
thanx guys for replies. i have managed to install the drivers and then i run the hardspl and now its showing :
KOVS110
SPL-0.72.0LINEX
MICROP1-787
MICROP2-707
now i hope it should upgrade it.before doing somthing i want to know after upgrading to jack's rom, the XPERIA logo that comes when starting the device will keep on showing right? the new rom will not remove it?
thanx
Click to expand...
Click to collapse
you have windows vista or xp ???
i cant solve this problem with xp
malik bro i have vista, what i did is i connected my device to pc, and without running the hardspl i restarted in bootloader mode (while connected) it automatically installed the drivers when it was in bootloader mode...
after that i restarted my device then i did the hardspl
and now i finished upgrading to jack's rom..job done.!!
now i have 2 problems.
first the panel is gone...how to install it?
2nd the xperia logo what comes in start is also gone...how to install it bcz i need it very much.
thanx
najaf363 said:
now i have 2 problems.
first the panel is gone...how to install it?
2nd the xperia logo what comes in start is also gone...how to install it bcz i need it very much.
thanx
Click to expand...
Click to collapse
read #2 post @ jack's ROM thread
Some cabs and extra files you may need.
1. X1 Panel package to add panel back (divided into sub cabs)
extract the .rar file then it'll show you the panels cab
install Jack Sony X1 Panel Main.cab first then u can install other panels
sorry cant help you with the xperia logo
ok i want to get back to my stock rom..is there anyway to do that?
how to remove this rom so i can install the orignal rom, by connecting with SE software update utility?
this rom is fast stable but its not only me how use this device.so others dont like the way programs and startmenu are showing.
Usb-driver
I have the same problem when trying to flash with XP. I have tried two different computers but have the same problem. It seems that there is some usb-drivers missing. One time i got an error in XP when rebooting the X1 that the usb-device not working correct.
Can not flash by computer
Can not flash using card
The problem occurs when trying to install ROM
Result: When running RUU. Reboot= OK, Tricolour =OK, Process freeze after "loading" apperas (when *.nbh is supposed to start loading.) SPL never finish.
Anoyone knows which driver i need?
don't forget to disable any firewalls and possibly antivirus... This was the problem for me when using Hardspl and Zonealarm suite... So switched off Zonealarm and Hardspl just worked.... [oh and any windows firewalls]
Will try again tonight without FW and antivirus...
However... i have successfully upgraded ROM using SE Update software earlier... The USB worked fine at that time.
najaf363 said:
ok i want to get back to my stock rom..is there anyway to do that?
Click to expand...
Click to collapse
Yes. Just download the generic ROM from the ROM thread and follow the exact same steps as for a custom ROM. Also, look for answers yourself before asking questions that have answers stickied
Spiff76, SE update uses a different way to access your phone. hardSPL can be considered a "hack", which is why antivirus etc. might detect it.
Hmmm... turned of FW and antivirus but same result. RUU freezes after reboot and tricolour. When phone is supposed to start loading new ROM it just freezes and i get a connection-error message.
I believe it has to do with the usb-connection but i can not figure out how to solve it. Have also tried ti install via card without any luck. Same problem remain... i can not get the SPL to finish.
Have any one experienced similar problem and how was it solved. It can not be a biggie but it is really ***.
As said, running this on XP. USB works fine with active sync and in usb to PC-mode.
Spiff76 said:
Hmmm... turned of FW and antivirus but same result. RUU freezes after reboot and tricolour. When phone is supposed to start loading new ROM it just freezes and i get a connection-error message.
I believe it has to do with the usb-connection but i can not figure out how to solve it. Have also tried ti install via card without any luck. Same problem remain... i can not get the SPL to finish.
Have any one experienced similar problem and how was it solved. It can not be a biggie but it is really ***.
As said, running this on XP. USB works fine with active sync and in usb to PC-mode.
Click to expand...
Click to collapse
Most probably YOU HAVE NOT DONE THE HARD-SPL FLASH FIRST
Please CHECK your tricolour screen: the world "olinex" must be there, which means you correctly flahsed the "olinex HARD-SPL" to your device
READ again. It's all written there (sticky posts)
First of all why should i ASK if there WAS AN ANSWER TO BE READ???
I have:
1. Tried to flash using exact intructions in:
http://forum.xda-developers.com/showthread.php?t=431218
Yes, the STICKY POST!
2. I have tried to flash from card whit hard_SPL:
http://forum.xda-developers.com/showthread.php?t=445662
Yes, again the STICKY POST!
And of course:
http://forum.xda-developers.com/showthread.php?t=446070
I have changed cables, ports. The flash seems OK, it says "olinex" in boot-loader but it has never finished.
Have searched the forum for other similar problems and found this thread.
I do not feel the need of repeating myself. Was hoping for some help and answers...

[Q] Problems after a dodgy install.

DaveShaw Edit:
Split the thread from the NBH Extract thread.
Hi there!
First off all thanks for the great help and all the hard work you all doing!
Keep on going!
I have problem extracting my "RUU_signed.nbh" file using the the "NBHextract" tool. The "nbh" file I need is from the:
"RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship" Rom.
I'm trying to extract with the CMD, or trying to drag & drop the "RUU_signed.nbh" onto the "NBHextract", its says in the CMD: extracting. Bat in fact, noting happens! There only the same 2 file in the folder and nothing else.
Can any one help?
Maybe some of you can tray to extract the file and upload the result to www.rapidshare.com or somewhere else?
I'm using desktop with XP PRO English.
Please! I'm going crazy!
Shaico said:
Hi there!
First off all thanks for the great help and all the hard work you all doing!
Keep on going!
I have problem extracting my "RUU_signed.nbh" file using the the "NBHextract" tool. The "nbh" file I need is from the:
"RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship" Rom.
I'm trying to extract with the CMD, or trying to drag & drop the "RUU_signed.nbh" onto the "NBHextract", its says in the CMD: extracting. Bat in fact, noting happens! There only the same 2 file in the folder and nothing else.
Can any one help?
Maybe some of you can tray to extract the file and upload the result to www.rapidshare.com or somewhere else?
I'm using desktop with XP PRO English.
Please! I'm going crazy!
Click to expand...
Click to collapse
I'm lost sorry
Have you downloaded the exe and need the NBH File? If so Install WinRAR, right click the exe and click Extract...
If you have the NBH file, then I suggest you re-try the steps you quoted again. Let me know if there are any errors on any steps.
Ta
Dave
DaveShaw said:
I'm lost sorry
Have you downloaded the exe and need the NBH File? If so Install WinRAR, right click the exe and click Extract...
If you have the NBH file, then I suggest you re-try the steps you quoted again. Let me know if there are any errors on any steps.
Ta
Dave
Click to expand...
Click to collapse
Well, I did those steps before, bat have no result. Don't see any error at the CMD. only show me the extract progress and at the end (after 2 min), there are no result! Only the same 2 file I started the progress. (RUU_signed.nbh + NBHextract tool)
I have the NBH and need to extract it... So I can continue to step 6 at these guide: Reverting back to the AT&T or HTC ROM and SPL for Warranty or return http://forum.xda-developers.com/showthread.php?t=335568
Can any one trey to extract the RUU_signed.nbh from
RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88 .07_1.27.12.11_Ship" Rom for me and upload the result?
Thanks in advanced!
Ok, update! I try to extract this in vista by drag & drop, and it worked!!! Bizarre...; and I got 5 file from the extract. The CMD still didn't work in the vista though...
Bat now i'm confused, because I read on other thread that I need to do Hard SPL first so I don't brick my TyTn 2 device... and in the guide:
(http://forum.xda-developers.com/showthread.php?t=335568),
its says I don't need to do Hard SPL. So what should I do?
let me tell you the reason I want to flash the SPL: I install Hebrew support pack that I download from the net and it work ok till I start to notice a rapidly massage of low memory (I didn't install nothing else!), bat the most reason fact that I want to flesh the SPL is because in addition of that message, the cracked Hebrew pack, showing me the logo of the company that made the pack; every time I restart the device, just before the HTC welcome logo and its showing for at lest 30 sec!!! Every soft reset!! So I try to uninstal that pack and its still showing every restart! Even, try to up grade to WM6.1, and still its there!!!! So I start to read some thread and think I need that spl flash so I can get rid of that "sticky" logo that slow my device and steal my memory!!
Can any one now something like that issue, and what shold I do in order to uninstall that long logo?
Shaico said:
Well, I did those steps before, bat have no result. Don't see any error at the CMD. only show me the extract progress and at the end (after 2 min), there are no result! Only the same 2 file I started the progress. (RUU_signed.nbh + NBHextract tool)
I have the NBH and need to extract it... So I can continue to step 6 at these guide: Reverting back to the AT&T or HTC ROM and SPL for Warranty or return http://forum.xda-developers.com/showthread.php?t=335568
Can any one trey to extract the RUU_signed.nbh from
RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88 .07_1.27.12.11_Ship" Rom for me and upload the result?
Thanks in advanced!
Click to expand...
Click to collapse
Ok, update! I try to extract this in vista by drag & drop, and it worked!!! Bizarre...; and I got 5 file from the extract. The CMD still didn't work in the vista though...
Bat now i'm confused, because I read on other thread that I need to do Hard SPL first so I don't brick my TyTn 2 device... and in the guide:
(http://forum.xda-developers.com/showthread.php?t=335568),
its says I don't need to do Hard SPL. So what should I do?
let me tell you the reason I want to flash the SPL: I install Hebrew support pack that I download from the net and it work ok till I start to notice a rapidly massage of low memory (I didn't install nothing else!), bat the most reason fact that I want to flesh the SPL is because in addition of that message, the cracked Hebrew pack, showing me the logo of the company that made the pack; every time I restart the device, just before the HTC welcome logo and its showing for at lest 30 sec!!! Every soft reset!! So I try to uninstal that pack and its still showing every restart! Even, try to up grade to WM6.1, and still its there!!!! So I start to read some thread and think I need that spl flash so I can get rid of that "sticky" logo that slow my device and steal my memory!!
Can any one now something like that issue, and what shold I do in order to uninstall that long logo?
Shaico said:
Ok, update! I try to extract this in vista by drag & drop, and it worked!!! Bizarre...; and I got 5 file from the extract. The CMD still didn't work in the vista though...
Bat now i'm confused, because I read on other thread that I need to do Hard SPL first so I don't brick my TyTn 2 device... and in the guide:
(http://forum.xda-developers.com/showthread.php?t=335568),
its says I don't need to do Hard SPL. So what should I do?
let me tell you the reason I want to flash the SPL: I install Hebrew support pack that I download from the net and it work ok till I start to notice a rapidly massage of low memory (I didn't install nothing else!), bat the most reason fact that I want to flesh the SPL is because in addition of that message, the cracked Hebrew pack, showing me the logo of the company that made the pack; every time I restart the device, just before the HTC welcome logo and its showing for at lest 30 sec!!! Every soft reset!! So I try to uninstal that pack and its still showing every restart! Even, try to up grade to WM6.1, and still its there!!!! So I start to read some thread and think I need that spl flash so I can get rid of that "sticky" logo that slow my device and steal my memory!!
Can any one now something like that issue, and what shold I do in order to uninstall that long logo?
Click to expand...
Click to collapse
OK I see what your getting at... Some facts first...
1. The guide you posted a Link to advises how to restore the Stock SPL and ROM if you have Hard SPL and a custom ROM. It does not mention Hard SPL for the simple fact that it is a guide on how to remove it (assumes you have it otherwise you wouldn't be reading the guide).
2. The SPL is the bootloader similar (in ways) to your PC's BIOS. I am pretty certain it has not been comprimised.
Firstly we need to know which splash was changed. There are 3 possible splashes that could have been changed. Have a look at this guide by -888- on upgrading you splash.
It is most likley to be one (or both) of the last two. Changing the first one requires Hard SPL and Flashing.
Rather than fixing the splash screens, I'd do a Hard Reset that will remove everything that was not part of your original OS ROM image.
If it is still there after that, I'd flash HardSPL and then flash a new Splash screen.
And, finally , this forum does not support cracked software, I will help you remove it however, if you promise to pay for it in the future
Ta
Dave
DaveShaw said:
OK I see what your getting at... Some facts first...
1. The guide you posted a Link to advises how to restore the Stock SPL and ROM if you have Hard SPL and a custom ROM. It does not mention Hard SPL for the simple fact that it is a guide on how to remove it (assumes you have it otherwise you wouldn't be reading the guide).
2. The SPL is the bootloader similar (in ways) to your PC's BIOS. I am pretty certain it has not been comprimised.
Firstly we need to know which splash was changed. There are 3 possible splashes that could have been changed. Have a look at this guide by -888- on upgrading you splash.
It is most likley to be one (or both) of the last two. Changing the first one requires Hard SPL and Flashing.
Rather than fixing the splash screens, I'd do a Hard Reset that will remove everything that was not part of your original OS ROM image.
If it is still there after that, I'd flash HardSPL and then flash a new Splash screen.
And, finally , this forum does not support cracked software, I will help you remove it however, if you promise to pay for it in the future
Ta
Dave
Click to expand...
Click to collapse
First off all, thanks for the help. I appreciate it!
I must mention that I buy the original version in advanced. I just was curious to check the net version and it turns out that it's not so good... to such an extent that I ruin me Kaiser...
now let me be more specific with me problem because i m not sure I explain the problem clearly and I don't want to start a progress that I don't know how to do....
So, like I say, after I finish the install of the language pack, I had to clear storage in order to crack the license. But since that, every restart, appear the logo of the software company for 30 sec!!! Every restart!!!! Its make me crazy!!!! (The logo appear just before the HTC logo load. (It's appear with the rom and the radio version = R.G.D). But this is not the main problem!! The most important problem is that since the install, its keep say me that I'm run out of memory, and I m even didn't install nothing!!! This is bad!
So off Corse I'm try to do hard reset and even try to upgrade to WM6.1, but the cursed logo is still there!!!!
Now, after I try to explain the problem, I want to know if the solution you recommended may solve the logo problem and more important the memory "leak"....
What I basically want is to bring me Kaiser to its original status like from "out of the box"... because it's only 2 week old!!!!!
I'm hope you understand me problem.
Thanks you in advanced!
Shaico said:
First off all, thanks for the help. I appreciate it!
I must mention that I buy the original version in advanced. I just was curious to check the net version and it turns out that it's not so good... to such an extent that I ruin me Kaiser...
now let me be more specific with me problem because i m not sure I explain the problem clearly and I don't want to start a progress that I don't know how to do....
So, like I say, after I finish the install of the language pack, I had to clear storage in order to crack the license. But since that, every restart, appear the logo of the software company for 30 sec!!! Every restart!!!! Its make me crazy!!!! (The logo appear just before the HTC logo load. (It's appear with the rom and the radio version = R.G.D). But this is not the main problem!! The most important problem is that since the install, its keep say me that I'm run out of memory, and I m even didn't install nothing!!! This is bad!
So off Corse I'm try to do hard reset and even try to upgrade to WM6.1, but the cursed logo is still there!!!!
Now, after I try to explain the problem, I want to know if the solution you recommended may solve the logo problem and more important the memory "leak"....
What I basically want is to bring me Kaiser to its original status like from "out of the box"... because it's only 2 week old!!!!!
I'm hope you understand me problem.
Thanks you in advanced!
Click to expand...
Click to collapse
Do you have a storage card? I wonder if it flashed off the storage card? Anyhow, let's get busy...
Firstly remove anything you want to keep off the card and then format it.
Then flash the Hard SPL using the instructions here: http://forum.xda-developers.com/showthread.php?t=396922 (Second set of instructions in post #2).
Once, you have completed the flash, enter the bootloader before Windows Mobile loads.
Then, when you are in the bootloader flash a New ROM and Radio.
Hopefully that will remove everything that shouldn't be there.
Also, moving out of pof's thread. To a new one
Ta
Dave
DaveShaw said:
Do you have a storage card? I wonder if it flashed off the storage card? Anyhow, let's get busy...
Firstly remove anything you want to keep off the card and then format it.
Then flash the Hard SPL using the instructions here: http://forum.xda-developers.com/showthread.php?t=396922 (Second set of instructions in post #2).
Once, you have completed the flash, enter the bootloader before Windows Mobile loads.
Then, when you are in the bootloader flash a New ROM and Radio.
Hopefully that will remove everything that shouldn't be there.
Also, moving out of pof's thread. To a new one
Ta
Dave
Click to expand...
Click to collapse
I'm sorry, it didn't help! Or I didn't understand the mining of the post! so I follow the instructions and then what? Nothing change! It's all the same! I can't see any different! What else can I do? How can I erase all the data include all!! Data!! And start again and make it brand new again? Im just want this logo to go away!! How do I make my Kaiser new again with no foreign files that no came with me device from the factory! I want to Cray!! I can't help it any more! Please help.
Can you please help me live? Can we kindly chat in the messenger? I'm lost of me mind with all this posts and cant mange this alone!
Thank you in advanced!
Anyone can please help?
Hi, sorry for the delay.
The instructions in my last post should get you back up and running. You'll have have to read up on the wiki and the ROM Development stickies for more help.
I am at work now, and am pressed for time at the moment, have a look on #xda-devs chanel on FreeNode after 8-9PM (GMT) for me. I'll be able to chat then. (I am also on MSN, but I don't use it at home that often. I'll try and make an effort over the next few days.)
Ta
Dave

HELP.. flashed rom wrong

I forgot to put the DIAMING.nbh file on my diamond! now it just shows up with "Touch Diamond" and then resets! i need help please
is this an easy fix??
Thank you so much!
go to bootloader (vol down + reset) and flash new rom from romupdater in windows
i got to bootloader but it won't read my usb... there is no DIAMING.nhb file (or whatever it is called) on my phone.. is there any application that will let me get the usb to work.. any ideas???
thank you
i can still run the custom RUU, and it runs on my phone as well.. so is there anyway.. or is there already one out there that has the DIAMIMG.nbh with it so that it installs without the need to manually move the file to the phone..
thanks again
Yes it does, if u get into bootloader, connect your phone to PC, you should see written USB in bootloader a then run RUU from windows, it should work. I experienced similar problem and that was my solution
i tried to flash a different rom onto my diamond, and it got 100% done.. but still... i wasn't able to move the DIAMIMG.nbh file to my root... do i need to use a rom that doesn't have a DIAMIMG.nbh file? where would i find one.. if i may ask?
your help is appreciated thank you
UPDATE
ok... so i found, and downloaded 2 RUU roms. one of them got to 90% done, and the other got to 91% done... does anyone know why this is..? these are the official roms, (I think).
i have searched for the past 2 days almost nonstop, i need a rom that will fully install onto my phone. This rom can't have me move the DIAMIMG.nbh file over manually either, because i cannot do this in bootloader mode.
i tried these 2 official roms. _HTC Touch Diamond_QMR_RUU_Diamond_HTC_Europe_1.93.401.2_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship.exe
and this one,
RUU_Diamond_HTC_Europe_1.35.401.3_Radio_Signed_Diamond_52.26.25.09_0.93.25.26_Ship.exe
do you know where i could download some other roms at? thanks
did you use Hard-SPL? maybe something with spl theres wrong
When flashing from your PC, you don't move an NBH over.
Go to htc.com, support, and download the current rom for your phone.
Soft reset holding volume down
Connect to your PC (DIRECTLY and NOT through a hub)
Run the updater you just downloaded from HTC
ya. i'm using hard-spl..
i tried getting a rom from htc, but i don't think that it's recognizing my s/n.. could i borrow someone elses??
i'm connecting my phone to a USB that's located in the back of my computer... i don't think it's a hub, but i'll try a different port maybe..
thank you again
so here's the full story.
i tried to install a rom.. it was shaks v3. and this was the rom. -> 2.03.401.2
i didn't put the diamimg.nbh file on it before i flashed it.
the RUU ran fine, but afterwards it was stuck just saying "touch diamond" , and it was resetting itself constantly.
i got into bootloader mode, and noticed that i could not transfer files from my computer to phone through that..
so i downloaded a rom that didn't require you to move the .nbh file over manually. it got to 90% , and then stopped i tried another, and it got to 91% and stopped, i tried another, it got to 89% and stopped, and i tried one more that got to 19% and stopped. i have tried using these RUU's on different computer's to install also..
IS there any way to move files using the bootloader mode? i know that the computer recognizes it, but not as a device with removable storage..
I'm starting to lose hope with my phone, and any help will be greatly appreciated
i don't know if it makes a difference, but i got my phone from Sprint.
ok!!! i totally just remembered that roms were made for CDMA users (Sprint verizon vodafone... ME) and GSM users... i was trying to flash a GSM rom onto my phone...
make sure that you know what type of rom to flash.. there are CDMA roms out there.. you just have to search...
thank you Felipe404, for your quick replies, and you made this easier for me.
thanks to JonInAtl for the precise reply...
both of your guy's help made a huge difference, that you don't even know.
WHOA!!!!!!
yea, i did the same thing,.. flashed my gsm diamond with cdma rom, after flash it just showed the bootscreen - Touch Diamond and there it stopped... so i got to the bootloader, connected the device to pc and flashed another rom from computer.. and it did work
no problem mayne
Just to clarify here, the ONLY reason to copy DIAMIMG.nbh to your device is if you do not want to update with the RUU. You can install every ROM using the RUU regardless of who made it.
That said, every time I want to update, I do have to copy it over to my phone as the USB port on it no longer works (it still charges, just says unknown device regardless of the ROM).

Help! Problems flashing X1

Hey everyone. I'm tearing my hair out trying to get this sorted but I just don't know what to do!
So, when I got my X1 as everyone on here should do, was flash my X1 with the HardSPL and some custom roms, this was a few months back. Then, shock! Horror! My case went and broke, (cracked near the volume button build W44) so I sent it back to SE for repair. I sent it back reset back to defaults but left the hardspl on there.
SE sent me a brand new phone (I think... This one says under the battery build w50, but the battery says w32..) I received it today. I thought it would be my old one repaired but SE had other ideas. Booted up and have Image Version: 1.03.931.10 and HardSPL 72.000 I think I said that correctly...
Now since sending it for repair and receiving it back, their seems to be quite a few wm6.5 roms floating about, and obviously I can't use the stock software as that wouldn't be right!
Now I have tried flashing the hardspl to the phone through my Vista PC and all it keeps giving me is connection errors. I thought maybe it was already flashed so I tried flashing just a rom, and that just made the phone get stuck on loading (flash by memory card). I thought it might be Vista, so I tried doing it on my other PC (XP) and I get the same issue. This bloody thing won't flash!
I have had "Connection Problems" - "Update Errors" with different numbers. The current one being Error [260] CONNECTION.
Now I have been searching around through the hardspl thread and other places trying to find out what I need to do or how I can fix it, but everything I try doesn't make a difference. I did read some other people with recently repaired phones having the same problem and perhaps SE have put a new spl thingy-ma-jiggy on there. (Please forgive the technical jargon, I have no idea what im on about.) I have also tried the ticking/unticking advanced network functionality, but that hasn't made a difference either.
So by the end of typing this, I have little hair left. Let's hope you can all help, before I have none left!
I would appreciate ANY help! Really.
Just wanted to add, I was at first getting the phone to a loading bar when flashing, but it would stay at 0% then flag up an error on the PC. Now after the tri-colour bars, the phone just sticks on Loading...
Well just to update. I have been trying to sort this since posting. I flashed the rom to an old UK generic one, as I read in another topic people had to do that before HardSPL. Done that, and tried flashing the hardspl. Same thing, just getting connection errors.
I tried going into bootloader and running the hardspl from there. It works and the phone gets to 10% and then gives an UPDATE ERROR. The phone is now bricked, and I have to reflash the original wm rom to get it back.
Though the Tricolour screen now shows 0.52.Olinex
Any ideas?
Shameless bump for help.
very stupid situation.
i have the same situation in puncto of flashing.
i get my phone three month ago.
after hardspl i .... sorry, no hardspl ... the phone says at 0% bla bla bla
i solve the problem by consulting one night absolutly stressing again and again and again .... google ... xda ... google
than 3 thinks at one time was the solution:
0. need activesync - connect !!!!
1. SDA_ApplicationUnlock.exe for desktop pc
2. enterbootloader.exe for pocketpc (please, the right version, it exist for eten too, but we need the xpediaversion ..)
3. changing registry-entries
how to:
activesync-connect, than copy "enterbootloader.exe" to pocketpc. it must be root, not sd-card. use a pocketpc-registry-program to change these values :
HKEY_LOCAL_MACHINE\Security\Policies\Policies\00001001 = 1
HKEY_LOCAL_MACHINE\Security\Policies\Policies\00001005 = 40
HKEY_LOCAL_MACHINE\Security\Policies\Policies\00001017 = 144
HKEY_LOCAL_MACHINE \Security\Policies\Policies\0000101b = 1
if not exist than add the key.
now, start desktop-program, follow instruction EXCEPT reboot.
start "enterbootloader.exe" on pocketpc. now, you can install hardspl and the device is flashable for ever.
thats works on me, hope it could help you too.
Thanks for the reply. Not had time to try it till this morning. Ok so, after spending about an hour trying to find the correct enterbootloader.exe I finally realized, that the hardspl package includes it. *Duh!* So that was time wasted.
I changes the registry values as you said with Resco registry editor, and follower the unlock then enterbootloader.exe Start HardSPL package. Starts to install. Gets to 10% then I get
ERROR [262] : UPDATE ERROR
The rom update utility has encountered communication errors during the update process.
So im open to suggestions if anyone has any. I just can't understand why it's not working. It's not a problem with my computer or cables. I flashed the phone before I sent it for repair and I have tried doing it on two computers one with XP 32bit and one with Vista 64bit.
hmm. would u like to install a custom rom, or a stock rom?
msg me, and i hope, i can halp u.
I want to have the hardspl on there so I can flash custom roms.
If it's a case of the software/firmware/hardspl whatever you call it, has been updated by SE. How would one go about getting it flashed? Would we have to wait for an update HardSPL to be released?
U read this thread?
My first hardspl was from this thread. New X1 will come tomorrow back from SE (vibration was defect +++ some more problems with case), and i will try it again with this thread.
hope, this will help u mate.
Yeah, I have been through that thread with a fine toothcombe trying everything suggested to see if I can make it work.
When you get yours back, if you have to do anything out of the ordinary to get it to flash or can't do it. Please come and let me know in this thread. If they have updated yours like mine, and yours won't flash, at least I won't be the only one!
k, i will msg u tomorrow around 2pm.
Cheers.
In the meantime. Does anyone have any other suggestions I could try?
Bump, for some help.
now i know, what is exatcly your problem.... <--- SAME Problem
i hope, i will find a solution and msg u then. if u´ll got a solution for this prob, msg me too plz.
Solution found in this Thread!
Download this and unzip it to your device. ++ run it. It will start your X1 in Bootloader menu and say "0.52.OliNex".
Then start hardspl while X1 is in Bootloadermenu....
FINISH =)
Thanks for the reply matey. Glad you got yours sorted. Just tried what you said and I get 0% then it switches to ERROR [262] : UPDATE ERROR.
vwrmic said:
Thanks for the reply matey. Glad you got yours sorted. Just tried what you said and I get 0% then it switches to ERROR [262] : UPDATE ERROR.
Click to expand...
Click to collapse
hmmm... it works fine on my new x1. are u sure, that u start the ssplmanual on your x1 and not on your computer?
Yea, im not sure what the problem was with it. Thankfully I have it done and dusted today! Because I flashed it earlier to an older official version, and you said you got it working. I presumed you had - had yours flashed to the newest version due to it being off for repair. So I reflashed the official update and fully updated it. Then tried hardspl which didn't work. Tried with the advanced USB thing off, tried again with how you said you did it above, and Viola!
Hip hip hoorah! Thanks for the help. Can finally use me bleedin phone now!
no problem mate hf with your x1
hello,
i see smilies and yea's ...
for me to understanding (for next time or other users):
1. complete official update (if exists)
2. flashing (hardspl) without "advanced usb"
thats all?
cool.

T5355 stuck on "TOUCH Diamond2" screen

Hi guys!
I have been trying everything that I could find on XDA to fix my problem.
I got this HTC clone a few weeks ago, and it was working fine.
I decided to install a UI on it and it worked fine. After a while I got bored of the UI, so I decided to uninstall it. After the uninstall, the device indicated that it needed to be restarted. I did that, but after it rebooted, it started to reinstall Windows Mobile 6.1. I was annoyed by this, but was like, whatever, and let it continue.
Where the real problem started was when the device froze up (I left it alone for over an hour, but there was no change).
I then had to pull the battery. After I put the battery back into the T5355 it just keeps getting stuck on the "TOUCH Diamond2" screen.
I tried all the hard reset and soft reset tricks I could find and have no been able to either setting it back to factory or bootloader mode.
I was able to find a post that described how to place the boo.ini, flash.bin, and loader.bin file onto my micro sd card. I was able to to get the boot.ini an flash.bin files, but can't seem to find a loader.bin file (it that the actual OS rom?). I then found a post that showed how to use HiSilicon IDT to force the install of the OS Bin file (C02_HTC_20091102_R2127_英全视角B包.bin).
I followed the instructions on placing the T5355 into "Download" mode and pushing the OS bin fine to it.
I am able get the IDT software to detect the T5355 and start pushing the install, but the damned thing ends up giving an XLDR error.
PLEASE! PLEASE! Somebody help me! This phone is brand new and really want to get it working again.
Model: HTC(?) T5355
Please help me someone!!
Is there anyone out there that can help me???
I am so frustrated and can think of what else to do!
The biggest problem I have is that I can't use ActiveSync. If I could use that I wouldn't have much trouble.
Does anyone know how to use HiSilicon's IDT properly? The instructions I was working off of are in Russian. I think that a need a loader.bin file for the T5355 that I can put on my micro sd card...or maybe not...I don't know.
I just really want to get this device back to factory settings.
Please someone take pity on me!!!
enter bootloader [those orizontal strange colors]
try flashing a new rom. you may search and download the original 6.5 build from HTC
to enter bootloader, press "volume down + shutdown button" and then flash the rom
ATENTION: plug the USB cable, wait a few seconds, you should see USB on the lowest white color, then do the flashing job
I don't think you would be experiencing these problems with an original topaz
Please take care this is a HTC CLONE
Pisca said:
Please take care this is a HTC CLONE
Click to expand...
Click to collapse
oups, I'm high resolution on monitor, I thought it was saying "done" not "clone" ) ... there's a thread dedicated to china clones, look here http://forum.xda-developers.com/showthread.php?t=619643
run with a rom in bootloader, it shud work
enter bootloader [those orizontal strange colors]
try flashing a new rom. you may search and download the original 6.5 build from HTC
to enter bootloader, press "volume down + shutdown button" and then flash the rom
ATENTION: plug the USB cable, wait a few seconds, you should see USB on the lowest white color, then do the flashing job
Click to expand...
Click to collapse
DalvuS, thanks for the reply, but the issue is that I can't seem to get into bootloader mode . I wish I could. The T5355 seems to be stuck in the middle of wm 6.1 install. I need to somehow wipe the install and be able to push a reinstall back to the device.
I don't think you would be experiencing these problems with an original topaz
Click to expand...
Click to collapse
Exca that comment doesn't help me. It just makes me more sad. I was gipped when I bought the phone . I thought I paid for a "real" Diamond 2.
If you can't to catch the bootmode, looks like hardware problem.
You can't to repair it at home, imho. Try the specialized service.
..............
... and: are you sure about key combination for bootloader screen for CLONE?
Hello people, how can i dump my rom from my phone (mfu w71) for backup, because i cannot find any rom in english only in chinese. I started to dump the chinese rom with some chinese kitchen (K3系列ROM工具), but i'm stuck. I do not know to do anymore i have extracted ROM, SYS folder. I think it would be good to start another section on this forum for the chinese phones.
Some help from experienced cookers would me be much apreciated.
My T5355 is up and working!!!
Thanks to everyone who replied to my post!!!
I discovered that the problem was that the PC I was attempting the install from was running an AMD based processor.
I tried on the family laptop (which runs an Intel processor) and the install worked!
I AM SOOOO HAPPY!!!
b0gdi good luck with your issue. Try doing a search here in XDA for "dump my phone".
nothing[switched off] -> press start -> command -> bootloader -> bootloader commands -> system start -> play
checking one by one by interfering would have done the trick
I'm glad to hear that... so now you're ok
NEXT !
help me please
i Have Flash my phone 100 times with IDT for WM6.5 and WM6.1 all the versions my phone is T5355 Hot D2 but in one day i flash a rom that kill my phone the phone are conntinue to work but no screen picture only light i have try some russian Rom that kill my phone
the phone was been on guerant so i send him back to my supplier thay fix the phone but the factory said that thay need to change the screen so now thay really change the screen and the phone back to me with WM6.1 some New version 20.1.2010 some think like this i have made a call but the phone hang up and not make calls so i try to put him Back the WM6.5 English ROM that i use with this phone before i try to Flash Russian ROM that brake me the picture of the phone and block me the Bootloader Combination of SEnd+End+Power so that way i send him to repair .
so i try the English Rom that i have use before he DOwnload the Flash Fine but now the screen are stop to show picture But the Bootloader are work fine
so i try all the Roms that i have and all the same the screen dont want to show picture
some body have a same problem or can help me with this ?

Categories

Resources