Related
I received yesterday my protection for Leo. I share with you the results of this:
http://www.flickr.com/photos/[email protected]/show/with/4210742282/
For shipping this protection:
http://www.pdair.com/catalog/product_info.php?cPath=10100000_900000_11000801&products_id=26364
Thanks for sharing; however you would have been better off posting in the Cases thread where we all go to see what's happening in the world of cases.
WB
Agree with above poster, can a mod fix this?
Nice case! ive also ordered 1 last week at PDAir, the 1 without a screen, so easy acces, but fewer protection. I am hoping its more solid so i can put it in my back pocket without getting a red face everytime i realize i accidently put it there...
When did you order it and did it took long (i am eager to get mine, but now hope is gone till monday or tuesday...)
I disagree.
The "Cases" thread is too long and too complicated for discussing any one specific case.
Anyway I ordered mine just a moment ago and would very much like to hear how quick was the shipment, how snug is the fit and how reassuring the neoprene feels
It's a shame they opted for a plastic screen protector instead of either a window-less aluminum door or a transparent cover that lets you work with the touchscreen.
mohasea said:
I received yesterday my protection for Leo. I share with you the results of this.
Click to expand...
Click to collapse
mohasea,
How thick is the plastic cover over the screen?
Does the plastic cover flex?
Do you think the plastic cover would prevent the screen being cracked if dropped screen down on ummm concrete?
Duperman said:
It's a shame they opted for a plastic screen protector instead of either a window-less aluminum door
Click to expand...
Click to collapse
I totally agree, wish they had a solid aluminum front door instead of the window cut-out covered in plastic or the other option they have of no plastic window cut-out. I would order one now,even not having my Leo yet, just because the front door was solid aluminum.
I am going to contact PDair and see if they would leave a few front doors out of the cnc cutter and have a full cover aluminum
Would you like one too, Duperman ?
Thank you,
Monnie
I have ordered an open screen case despite it may not fully protect the screen. HD2 has a glass screen and it is hard enough against scratch as what has been in iphone.
Would you like one too, Duperman?
Click to expand...
Click to collapse
Absolutely
Mine, the one without screen plastic, is supposed to arrive between now and Jan 27th next year...(sometime)
take care
Anyone got theirs yet?
Would love to see some detailed photos and a review of the case pros/cons
Thank you,
Monnie
I'm debating whether to go with their leather flip case or this aluminum case...
I got this case and immediatly wished there was no plastic screen on the front door. So, I held it over some boiling water for about 2 mins and and then used my thumb nail (not kidding it was easy) to pry the plastic from the metal. The whole lot peeled off easily, i replaced the foam into the case and BAM perfect case. (be careful not to rip the foam, but if you do it will still stick back. also the foam stretched out a bit but pushed back into shape no problem. TIP: Work from the front side of the case, wedge your nail into the seem and loosen it all the way around. If it starts to get tough again, hold it over steam for a while longer.
Also.. when the plastic was still inplace and the case door was closed, there would be random screen presses and that was not cool, however now that the plastic is out, i can leave the door closed, press when I want too, AND there is no random case presses
I know this sounds like a poor fix, but it worked awesome and it looks like it was SUPPOSED to come this way.
Now all i need is for my zag shield (front only) to show up and im perfectly protected (minus water damage dammit)
awesome case guys im not kidding. you dont have to put the nubbin on in the back either so it doesnt add much bulk to teh phone. good luck yo.
Got mine too and I use the black open faced aluminum for local use and insert the whole unit;
aluminum case and all into the Maxpedition "Rat" wallet for carrying on belts etc.... http://www.maxpedition.com/store/pc/...&idcategory=11
Like it alot....
FWIW
well, do not kill me if I say so .. but it is ugly as hell.
I do not say that it does not protect the phone, or the the finishing it's not ok .. but from a slim phone with a huge screen, it looks like a bullet proof brick with a screen.
The whole idea of an elegant smartphone it's gone.
Small question: what do you hate about the original leather case?
It is elegant, slim easy to use and protect the phone in normal use conditions or small accidents.
Capdase Alumor Metal Case
Bought this silicon w/ aluminium backcover case by CAPDASE in Hong Kong, adding a more "solid" feel over the pure silicon case. It comes with a CAPDASE screen protector as well.
http://www.mobimega.com/capdase-alumor-metal-case-htc-hd2.html
Beware that the silicon case may not glue well to the aluminum backcover (I think it's the factory problem) which may leave a small gap between them when you put the phone in. I have to apply some glue to fix that myself. Apart from the case is nice and not too costly.
byronlee said:
Bought this silicon w/ aluminium backcover case by CAPDASE in Hong Kong, adding a more "solid" feel over the pure silicon case. It comes with a CAPDASE screen protector as well.
Beware that the silicon case may not glue well to the aluminum backcover (I think it's the factory problem) which may leave a small gap between them when you put the phone in. I have to apply some glue to fix that myself. Apart from the case is nice and not too costly.
Click to expand...
Click to collapse
Hi,
I am seriously thinking about ordering one for my Desire (A8181).
But what I'm not able to find, is how it works. I mean, you seem to describe the case as a silicone skin, with a metal plate sticked to it.
I thought it was more like a silicone skin with another semi-case to "clip" over the silicon....
Can you confirm if I am right or wrong?
And can you post multiple angles pictures?
Thank you, it would be much appreciated!
thanks but
so uglly
Ohh Great!
Thanks for the pictures! To me is one of the best cases i've ever seen.
Just thought I'd provide some feedback on a hard polycarbonate 2 piece case I just bought for my NS
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=320644208392
It feels great and its also very hard to scratch off the rubberised black paint. Certainly a quality product for not much $$.
I've seen the review on the Best Buy hard case (purple one) and the phone doesnt seem to fit very good. However, this one fits absolutely perfect.
Another good point is that I found it fairly easy to split the case apart using a coin, without doing any damage to the clips or the phone. Other cases I've seen seem to break the clips during this proceedure.
Looks like a good deal, but I'd be careful with snap on cases. They tend to scratch the back of the phone or bezel over time. At least that's what happened to me. :/ Usually what I'd do is tape the edges. Thanks for the review.
peeturr said:
Looks like a good deal, but I'd be careful with snap on cases. They tend to scratch the back of the phone or bezel over time. At least that's what happened to me. :/ Usually what I'd do is tape the edges. Thanks for the review.
Click to expand...
Click to collapse
Agreed. I always spray a little bit of Plasti Dip inside the covers, which gives it a rubbery surface on the inside.
I usually buy gel / tpu cases, but after getting some dirt inside my last one on the Galaxy S and scratching the bejesus out of the rear battery cover, I'll never buy a tpu case again.
The best case so far is the Griffin survivor knockoff but it is very cheaply made. The screen protector scratches very easily. Does anyone have an idea where I could get the material used for the screen protector that Otterbox uses ?
Otterbox defender has a good quality protector but unfortunately it has cutouts for the home button as well as the top Speaker.
ARE there any other options ? Does anyone have any ideas how to dust proof the Otterbox?
Dust definitely is a problem with this case. I end up taking it apart to clean a couple of times a day, which sounds worse than it really is, even to me - When I think about it, I'm like, "Ugh, what a pain", but then, after, I'm like, "That wasn't so bad".
Anyway, in response to your question, I do have an idea, but haven't tried it and probably won't because I don't mind the cleaning.
You could cut to size and glue rubber washers to the inside of the screen, outlining the cutouts.
Tape. Put a small piece non sticky side up over the home button opening then tape it down from the inside do the same with the speaker cutout and use a needle to perforate it. If you're good with an exacto knife you could cut colored tape to fill the opening then use a small strip of crystal clear packing tape to seal it into place. It's cheap and easily replaceable when dust gets stuck to it. It'll serve 2 purposes of helping block the dust and catching what sneaks by.
☆SoA: Son's of Android™☆
I like to break stuff!
What is the point?? You might as well put it in a glass case and never touch it. It's not a mickey mantle rookie card, it's a frikin phone.
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
LittleRedDot said:
What is the point?? You might as well put it in a glass case and never touch it. It's not a mickey mantle rookie card, it's a frikin phone.
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Click to expand...
Click to collapse
Some people work in environments with lots of silica dust which will destroy the screen in no time. It's no fun to have a hazy scuffed up screen on your $700 phone.
☆SoA: Son's of Android™☆
I like to break stuff!
If I worked in an environment prone to dust/sand, I'd have an otterbox no doubt!
I don't mind a few scratches on my phones body/midframe but my screen must stay relatively pristine. Scratches on my viewing area drive me insane :thumbdown: luckily I have an office job, but I do live in Florida and there's lots of sand around to wreak havok on your screen. For that reason alone I never put mine in a pocket cuz I prefer my glass naked, so I use a microfiber/microsuede lined leather holster with the bottom corners open so the sand and dust can fall out easily.
☆SoA: Son's of Android™☆
I like to break stuff!
apallohadas said:
If I worked in an environment prone to dust/sand, I'd have an otterbox no doubt!
Click to expand...
Click to collapse
Defender for Note 2 won't save you from dust. For someone working in such harsh environment, I wouldn't even recommend getting N2 but rather S3 with Otterbox Armor soon to be released. Seidio OBEX might work as well. But those are not for N2
+1 for survivor case..that is what we can get for now on our note 2..
Sent from my GT-N7100 using xda app-developers app
Delete
I guess I don't see how taping over the speaker and the punching tiny holes in the tape solves anything. Also tape would peel and get dirty. Just put a quality sp on and buy a good case, then leave everything else up to the gods.
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Tape costs a few bucks for a big roll. When it peels you replace it, same with getting dusty. Thats the whole point of using tape so the dust sticks to it instead of getting and and being able to move around. As for perforating the tape, a few small holes is much harder for dust to get thru than a large opening, but will let the sound thru fairly well. Obviously you've never had to protect electronics in a harsh environment. One of the most common things done to protect ordinary electronics in the desert is put tape over the ports to prevent sand from getting in. Same in wet environments only you use heavier tape like no residue duct tape.
☆SoA: Son's of Android™☆
I like to break stuff!
I found this on Amazon and remembered seeing this post. Figured I'd bring it to your attention. I was looking at the zero lemon battery and stumbled on this. Waterproof and dust proof.
summercomm-- Waterproof Skin Case for Samsung Galaxy Note 2 N7100 Multi Purpose Protective Skin for Underwater Activity, Fishing, Ski, Snowboarding, Sand-proof, Dustproof, Bath Tub
http://www.amazon.com/dp/B00B5A16R0/ref=cm_sw_r_an_am_ap_am_us?ie=UTF8
Sent from the lab whilst Pinky and the Brain try to take over the world.
I just had a marvelous idea. Put the phone in a zip lock bag and use a bluetooth earpiece. :good:
-EViL-KoNCEPTz- said:
Tape costs a few bucks for a big roll. When it peels you replace it, same with getting dusty. Thats the whole point of using tape so the dust sticks to it instead of getting and and being able to move around. As for perforating the tape, a few small holes is much harder for dust to get thru than a large opening, but will let the sound thru fairly well. Obviously you've never had to protect electronics in a harsh environment. One of the most common things done to protect ordinary electronics in the desert is put tape over the ports to prevent sand from getting in. Same in wet environments only you use heavier tape like no residue duct tape.
☆SoA: Son's of Android™☆
I like to break stuff!
Click to expand...
Click to collapse
Yes obviously, because you know me, I've never had to protect my device in the desert.
But you would be wrong, I did 4 combat tours in Iraq and I never had a problem with a screen protector and a case. I been in sandstorms so bad you couldn't see in front of your face and I've never damaged a device. So before you go assuming things that you know nothing about maybe you should stop and think before you put your foot I your mouth.
In fact I still have the ipod I took with me and it works perfectly, as did my mates.
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
I have the book type flip case with holes on the flip cover for accepting calls and all that stuff but its not dust proof and I hate it..dust gets to my screen everytime and it damages my chrome bezel and back cover
Hello gyuz,
As mentioned in another thread in Accessories sub-forum, while Installing the Whitestone Dome Screen Protector (https://www.whitestonedome.com/) on my Samsung Galaxy Note 8, there was UV glue spillage all around the phone & now I have dried (UV cured) glue in the tiniest gap between the screen edges and the metal frame of the phone. Please check attached image, I have circled with red the exact location of the glue, however imagine this almost all around the phone:
Now I need a good UV glue remover to soften the dried glue and an extremely thin blade (or a similar tool) to reach in the gap and remove it. I saw some products on ebay, however I am not sure which will do the job.
First of all which Glue Remover is more suitable? Does it have to be a branded one? Or the unbranded ones will do the job as well? Is there danger that the remover will dry and stay in the gap making it worse? Will it damage the color or consistency of the metal frame? Will it damage the buttons (Power, Volum, Bixby)?
Secondly, which tool should do the job reaching such tiny gap while at the same time not scratching the screen or the metal frame? Metal Blade? Plastic Blade? Wire? Some other tool?
Please advise, as I am nearly desperate. Thank you!
Damn, I'm sorry you're having to deal with this. This is one of the biggest reasons why I don't use screen protectors on my phones. I've used a glass one on my Note 5 but didn't like it. Naked display feels the best and performs the best. Not fuss, no glue, no BS. Eeek!
roaduardo said:
Damn, I'm sorry you're having to deal with this. This is one of the biggest reasons why I don't use screen protectors on my phones. I've used a glass one on my Note 5 but didn't like it. Naked display feels the best and performs the best. Not fuss, no glue, no BS. Eeek!
Click to expand...
Click to collapse
Agree with everything. if i had the chance again I would leave it naked, however I would still feel very uncomfortable without protection.. Actual screen exposed to everything is a little risky!
OP, wish I could advise you, but all I can say is take your time and don't rush this task. Since as you aware, you don't want to use a chemical or item that will damage the frame or buttons. Don't use any metal objects.
Feel for you bro, you go ahead with good intentions to protect your device and now in a predicament.
Sent from my SM-N950U using Tapatalk
Limeybastard said:
OP, wish I could advise you, but all I can say is take your time and don't rush this task. Since as you aware, you don't want to use a chemical or item that will damage the frame or buttons. Don't use any metal objects.
Feel for you bro, you go ahead with good intentions to protect your device and now in a predicament.
Sent from my SM-N950U using Tapatalk
Click to expand...
Click to collapse
Thanks for your understanding mate. Indeed tried for the best and ended up worse.
I am not rushing for now, just conctacted Whitestone themselves asking advise on how to fix it, as well as an ebay seller that sells such equipment/tools. He suggested me these:
http://ebay.eu/2g3RySr
http://ebay.eu/2kATYJV
I am not sure about the quality of the Glue Remover and how thin the tools (blades & spudger) are though. Have to make a little research.
That is why also I opened the thread to ask for opinions from people that may have done this or similar task before and to help others in the future.
Warlord1981 said:
Thanks for your understanding mate. Indeed tried for the best and ended up worse.
I am not rushing for now, just conctacted Whitestone themselves asking advise on how to fix it, as well as an ebay seller that sells such equipment/tools. He suggested me these:
http://ebay.eu/2g3RySr
http://ebay.eu/2kATYJV
I am not sure about the quality of the Glue Remover and how thin the tools (blades & spudger) are though. Have to make a little research.
That is why also I opened the thread to ask for opinions from people that may have done this or similar task before and to help others in the future.
Click to expand...
Click to collapse
Before using any chemicals, I would try and use the finest /thinnest plastic card or tool to scrape the glue out of the edges first. Chemicals would be my last resort. Good luck my friend.:good:
roaduardo said:
Damn, I'm sorry you're having to deal with this. This is one of the biggest reasons why I don't use screen protectors on my phones. I've used a glass one on my Note 5 but didn't like it. Naked display feels the best and performs the best. Not fuss, no glue, no BS. Eeek!
Click to expand...
Click to collapse
I have dropped my phones at least 5 times in the last year and each time it landed screen side down. I broke all 5 glass protectors but never the screen. That is why I must have a full adhesive glass protector on. It is a PITA to get perfect but for me, it's worth it.
Mike02z said:
I have dropped my phones at least 5 times in the last year and each time it landed screen side down. I broke all 5 glass protectors but never the screen. That is why I must have a full adhesive glass protector on. It is a PITA to get perfect but for me, it's worth it.
Click to expand...
Click to collapse
I understand, some people need it. I haven't chipped or broken a display since I had an iPhone. Knock wood. Naked is glorious, though.
Plastic tools and alcohol are your friends.
99% Isopropyl should be able to dissolve the glue, and shouldn't leave a mark on the phone (iso evaporates completely and is not dangerous to plastics or metals). A stiff bristled plastic brush would be ideal, maybe an old toothbrush. The thinner and stiffer the bristles, the better.
The iso will dissolve the glue, but you'll need to mechanically agitate it to remove it completely. Bear in mind that traces of iso having touched the glue will streak glass , so a second/third rinse with iso may be necessary.
I'd be careful about getting iso into the switches, as long term iso can degrade rubber (switch seals etc) but as long as you clean, then dry out effectively there shouldn't be an issue (iso will evaporate at room temp in any case). Covering the switches with tape could help, but iso is so thin it will probably go under the tape, and will likely dissolve the glue on the tape too!
e: Whatever you do don't use acetone or any other stronger solvent. Depending on the plastics used acetone will eat right through them, and may affect the finish on other parts too.
Iso really is a decent cleaning solution for most electronic devices.
e ii: Oh, and if you use an old toothbrush, make sure it's very clean. Getting some toothpaste grit on the screen and rubbing it in with a brush would be tragic. Maybe even buy a brand new brush just for this job? Not too expensive for the job, imho.
Limeybastard said:
Before using any chemicals, I would try and use the finest /thinnest plastic card or tool to scrape the glue out of the edges first. Chemicals would be my last resort. Good luck my friend.:good:
Click to expand...
Click to collapse
Yes I'm trying to find such thin tool made of plastic. Cards are too thick for it. It needs to be so thin that can cut you..like razor blades maybe even thinner.
Warlord1981 said:
Yes I'm trying to find such thin tool made of plastic. Cards are too thick for it. It needs to be so thin that can cut you..like razor blades maybe even thinner.
Click to expand...
Click to collapse
Packaging plastic is often thin and stiff... Cut it into a triangle and see if you can get "under" the glue in the gap.
roaduardo said:
I understand, some people need it. I haven't chipped or broken a display since I had an iPhone. Knock wood. Naked is glorious, though.
Click to expand...
Click to collapse
HAHAH, SNAP! Same here, last phone I ever broke was my last iphone I owned , it was the iphone 4s. That was when I was drinking also,
Nekid, is always glorious, without a shadow of a doubt. But I am too shy and need coverage.
iPhone screens can be so brittle. I got used to changing screens for friends at work. During lunch they'd bring me their replacement display kits that they ordered from Ebay and I'd replace their broken screen for some Subway (as payment).
Warlord1981 said:
Yes I'm trying to find such thin tool made of plastic. Cards are too thick for it. It needs to be so thin that can cut you..like razor blades maybe even thinner.
Click to expand...
Click to collapse
Indeed, but not metal.
What i used after installing the whitedome was a sheet of paper, running the corner around gap. Cleaned it easily this way.
princeasi said:
What i used after installing the whitedome was a sheet of paper, running the corner around gap. Cleaned it easily this way.
Click to expand...
Click to collapse
I think OP needs something as thin but stiffer as his glue is cured fully now.
Sent from my SM-N950U using Tapatalk
Limeybastard said:
I think OP needs something as thin but stiffer as his glue is cured fully now.
Click to expand...
Click to collapse
The glue stays soft. If you run the paper around it, it will come up. After about a half a cycle thru, I would cut the edge of the paper each time so that I can continue with a firm edge. I did this after a week of installation.
princeasi said:
The glue stays soft. If you run the paper around it, it will come up. After about a half a cycle thru, I would cut the edge of the paper each time so that I can continue with a firm edge. I did this after a week of installation.
Click to expand...
Click to collapse
Guyz you won't believe it! For the past 2 hours I was doing exactly that! Actually what worked best was a piece of paper that had the dust removal stickers on it (got it from the Olixar Sentinel Case/Screen Protector kit), which is more firm than plain A4 paper. And I was cutting it all the time to keep its sharpness. At some point it finished and I used just plain A4 paper, which wasn't the same but it kinda worked as well..
I was running it inch by inch around the whole frame, taking out glue (indeed soft) little by little! I think it's much better now, though I think I will do another round in the near future.
well after watching videos.. I could see I never needed ALL of that small tube of glue. I always use some kind of screen protector. I like to sell or give away. And you can ALWAYS tell the used phones that never had a screen protector. Always some kind of scratches.. For me selling it mint.. gets more money.
So use some kind of plastic not metal blade to get the excess glue off. It comes off so easily
Warlord1981 said:
First of all which Glue Remover is more suitable? Does it have to be a branded one? Or the unbranded ones will do the job as well? Is there danger that the remover will dry and stay in the gap making it worse? Will it damage the color or consistency of the metal frame? Will it damage the buttons (Power, Volum, Bixby)?
Secondly, which tool should do the job reaching such tiny gap while at the same time not scratching the screen or the metal frame? Metal Blade? Plastic Blade? Wire? Some other tool?
Click to expand...
Click to collapse
I had the same issue with mine and all I used is the film that you remove from the Glass protector before application.. cut off small squares and I ran that in the tiny gaps but making sure you don't go too deep.. Patience and time is must..
I do have a question though.. What is the best thing to use if I wanted to remove my protector off, clean the cured adhesive and use the 2nd bottle to reapply??
Any ideas on a nonslip thin cover for the bottom of the Gemini or very small felt or rubber feet?
I expect to receive my unit soon.
My idea was to use silicone to create my own "feet".
The idea is to cut feet shaped holes into thin foam, the kind you would use for scrapbooking, stick the foam onto the bottom of the gemini, fill the cut out holes with a thin layer of silicone (should be neutral curing silicone, not the type that causes a vinegar smell when curing), then remove the foam molds and let it cure.
Since I haven't physically held a Gemini PDA in my hands yet I still don't know where the rear feet underneath the LCD need to be so that the device doesn't tilt backwards. Possibly the rubber feet will need to be on the metal hinge itself, which would make things a bit more complicated.
Silicone shouldn't stick that well, so I expect to loose a foot now and then and I hope that it will be easily removable without damaging the devices case.
drwatson said:
I expect to receive my unit soon.
My idea was to use silicone to create my own "feet".
...snip...
Silicone shouldn't stick that well, so I expect to loose a foot now and then and I hope that it will be easily removable without damaging the devices case.
Click to expand...
Click to collapse
Or just get wide enough grip tape to cover the entire bottom plate. That's what I plan to do with mine since cases that allow you to keep using it are pretty much impossible with this sort of device.
Oh, how nasty I can't imagine this will ever come off again
If you want to make feet, you guys should really check out Sugru! It's amazing stuff. It makes for a great present too. They should just about give me a commission, haha
https://sugru.com
I had a leftover woven carbon fiber sticky sheet that I cut to size and put on the bottom metal plate. Protects and looks good.