all of a sudden i realized my storage card's content (2GB) just dissapeared.
I have over half of my non OEM programs installed on it and i cannot use them.
has this happened to anyone before?
how do i fix this?
thanks
Well... It happened to me in some way, but after about a minute all was back again. Don't really know why. Maybe soft reset would help?
I had that issue a while ago, apparently it was gone, but the space was still occupied. I didn't find a solution so i had to reformat it and it never happened again.
This exact same thing happened to me yesterday; all of a sudden, when using Resco Explorer, all of the contents of my storage card disappeared. The card looked blank. However, it also still looked like the space was occupied - meaning I did not have 6 GB of free/empty space - just no content. I re-formatted the card on my desktop and am re-syncing now but I have no idea how or why this happened. I have not recently installed any new software.
Nothing disappeared. Turn off the phone, take the card out and put it back in, then turn the phone on. Did you even soft reset first?
ronfin44 said:
Nothing disappeared. Turn off the phone, take the card out and put it back in, then turn the phone on. Did you even soft reset first?
Click to expand...
Click to collapse
Tried it didnt work. I guess i have to re format
This happened to me and it was from a loose card and a soft reset found my data.
Soft reset didnt help. I tried a hard reset and Nothing. Its like my device cannot recognise my sd card at all. when i check in the setting it says the storage card is not installed.
what do i do?
I can say that it happened to me because I installed a P2P program and it froze and I had to reset. THen my sotrage card got messed up.
It's like any flash memory. If it's in the middle of writing and your phone gets turned off or something then you will corrupt your data. I don't know if you can buy some third party program to get your stuff back. maybe.
????
I had this problem too.....Here's a couple of things you can do
1) take out sd card , take compressed air and blow a little air inside where sd card goes , put card back in and do it slowly wiggle it ever so slightly , take out sd card and do this one more time , this worked for me.
2) in file explorer under "storage card" look for a file called " MSMETADATA ...and DELETE it for some reason this file freezes your device from reading you card
3) go to windows media player and go to library and update your library , see if your sd card shows up there , thats the way I knew my phone was reading my card
4) bad card....I have had a bad card before and it was doing the same , I bought a new one and things got better
good luck my friend
mike
this happened several times on my 8525, and once on my tilt. I've never pinpointed exactly what happened, but it IS a big problem that was supposedly fixed by HTC on the tilt.
I stuck the card in my computer and ran some data recovery tools. They dont always work, but you get lucky sometimes. I then formated the card and copied the data back.
ronfin44 said:
Nothing disappeared. Turn off the phone, take the card out and put it back in, then turn the phone on. Did you even soft reset first?
Click to expand...
Click to collapse
I turned the phone on and off several times and did several soft resets; I also went into Windows Media Player and attempted to update my library but it would not read my storage card. Neither would the "HTC Audio" program, or CorePLayer, or Resco File Explorer/Photo Viewer; nothing would even recognize the card. Also, when I used a card reader in my PC nothing appeared either. I had to re-format and re-copy my files.
Hey guys, thanks for your advise.
Im gonna buy a new microSD card and see if my kaiser recognises it. Hopefully it does. If so thats great.
Just hope its not the phone with the problem.
i'll let u know whats up
by reformat...do u mean hard reset?
Try this:
With the card in a read/writer or adapter that works (not the phone), go into DOS: Start>Program Files>Accessories>Command Prompt or Start>Run and type in CMD and Okay.
Change the directory to C: drive (i.e. cd\C: )
Type chkdsk e: /f /r at the c: prompt (e: is whatever your card drive is).
Let it run. If it asks about saving a file, you may as well say NO as it will be corrupted or a partial file.
Then EXIT and try the card. Data, for the most part, should still be there and not destructed like FORMAT will do.
Mack
bluemamba said:
by reformat...do u mean hard reset?
Click to expand...
Click to collapse
No - by re-format I mean I inserted the card into a card reader and re-formatted it as "FAT32" on my desktop PC. I tried to do his on my phone first with SK Tools and MemMaid but neither would recognize the card.
Well. My SDcard (scandisk) is not recognised by my phone or my card reader, so i could not format it.
I bought a new Kingston one and my phone recognises it.
I guess it was the card after all.
Mack5305 said:
Try this:
With the card in a read/writer or adapter that works (not the phone), go into DOS: Start>Program Files>Accessories>Command Prompt or Start>Run and type in CMD and Okay.
Change the directory to C: drive (i.e. cd\C: )
Type chkdsk e: /f /r at the c: prompt (e: is whatever your card drive is).
Let it run. If it asks about saving a file, you may as well say NO as it will be corrupted or a partial file.
Then EXIT and try the card. Data, for the most part, should still be there and not destructed like FORMAT will do.
Mack
Click to expand...
Click to collapse
I had the same problem: after something went wrong with an install file from my card on my Kaiser, all files on the card were deleted.
I was able to retreive the card content on my PC (from a card reaceder) with the free program "PC Inspector File Recovery".
After that, I restored the content to the card. I performed a checkdisk (see Mack5305 above). I then removed the directory MSMETADATA.
After this, I could use the card again.
Related
Help! My Kaiser can't read my memory card!
After having transferred a few media files to my Kaiser's microSD card using Activesync's "explore" function, I noticed some folders with gibberish names had been generated in the My Documents folder. I tried opening some of them and found nothing in them. I dismissed this and continued with the file transfer. The strangely-named files eventually disappeared
Shortly after, I disconnected the Kaiser from my laptop, and started the Audio Manager, as I was on my way to the gym. An error message popped up saying the "file Audio Manager cannot be opened..."
I can't remember what prompted me to do so, but I opened the File Manager and discovered that my Storage Card was not registering anymore. That said, I had to settle with the gym's crappy music, instead of my the playlists on my Kaiser
Coming back from the gym I popped the memory card (2GB Kingston microSD) into my card reader and my laptop was able to read all its contents.
This morning I tried a friend's microSD card (same make & model) and my Kaiser still couldn't read it.
Is this a hardware or software problem? If the latter, how can I rectify this?
Thanks in advance for any input.
Put it in your computer's card reader and do a filesystem check.
rigelstuff said:
Help! My Kaiser can't read my memory card!
Click to expand...
Click to collapse
Watch out because Kaisers are well known for loosing whats on a microSD card (I've had this happen 3 times now) so I hope you have backed up everything of importance on your card before going any further.
I can't remember what prompted me to do so, but I opened the File Manager and discovered that my Storage Card was not registering anymore. That said, I had to settle with the gym's crappy music, instead of my the playlists on my Kaiser
Click to expand...
Click to collapse
I cant help with changing the gyms music but when you say "wasn't registering anymore" do you mean no files were showing in file manager (ie possibly corrupted/lost files - you never mentioned if you checked the file integrity on your laptop) or that under settings => memory => storage card tab, nothing is showing (whats in there)?
Is this a hardware or software problem? If the latter, how can I rectify this?
Click to expand...
Click to collapse
If it's software try a soft reset and if that doesn't fix it then back up your data and perform a hard reset (make sure the card is out of the device when you do this) - this is the Windows Mobile equivalent of running a recovery CDROM on a desktop PC and it will restore your devices files and settings to an 'as from the factory' state (assuming you've not changed the ROM/Radio or SPL since). Let us know how you get on.
Flying Kiwi said:
Watch out because Kaisers are well known for loosing whats on a microSD card (I've had this happen 3 times now) so I hope you have backed up everything of importance on your card before going any further.
Click to expand...
Click to collapse
I wasn't able to do a backup (didn't have Sprite Backup installed yet), but have manually saved all the files to my laptop.
Flying Kiwi said:
when you say "wasn't registering anymore" do you mean no files were showing in file manager (ie possibly corrupted/lost files - you never mentioned if you checked the file integrity on your laptop) or that under settings => memory => storage card tab, nothing is showing (whats in there)?
Click to expand...
Click to collapse
"Storage Card" doesn't show up in File Manager at all. I'll try doing a file system check on my laptop.
Flying Kiwi said:
If it's software try a soft reset and if that doesn't fix it then back up your data and perform a hard reset (make sure the card is out of the device when you do this) - this is the Windows Mobile equivalent of running a recovery CDROM on a desktop PC and it will restore your devices files and settings to an 'as from the factory' state (assuming you've not changed the ROM/Radio or SPL since). Let us know how you get on.
Click to expand...
Click to collapse
Already did a soft reset several times, didn't help. I was hoping to avoid doing a hard reset, but if it's the only way...
Much thanks for all your input
Sprite Backup not reqd for microSD backup
rigelstuff said:
I wasn't able to do a backup (didn't have Sprite Backup installed yet), but have manually saved all the files to my laptop.
Click to expand...
Click to collapse
It's easier than that... If you have Win XP (and probably Vista has an equivalent option), there is an often under utilised program under Start => Accessories => System Tools called 'Backup'. If you put your microSD card into it's USB reader, this program will do everything you need and it's very simple to use.
"Storage Card" doesn't show up in File Manager at all.
Click to expand...
Click to collapse
I understand that but what appears under start => settings => memory => storage card tab (tap those in that order)?
I'll try doing a file system check on my laptop.
Click to expand...
Click to collapse
As already suggested by khaytsus, that'd be a good idea to try before going down the last ditch hard reset route.
Flying Kiwi said:
It's easier than that... If you have Win XP (and probably Vista has an equivalent option), there is an often under utilised program under Start => Accessories => System Tools called 'Backup'. If you put your microSD card into it's USB reader, this program will do everything you need and it's very simple to use.
Click to expand...
Click to collapse
Interesting... thanks for this. There aren't really any critical files in my memory card, so a simple copy of whatever's in the My Documents folder will do.
Flying Kiwi said:
I understand that but what appears under start => settings => memory => storage card tab (tap those in that order)?
Click to expand...
Click to collapse
Make that "memory => System => storage card..." ;-)
Nothing shows in the storage card tab. That's what I meant when I said the phone doesn't recognise the card.
Flying Kiwi said:
As already suggested by khaytsus, that'd be a good idea to try before going down the last ditch hard reset route.
Click to expand...
Click to collapse
Thanks.
rigelstuff said:
Interesting... thanks for this. There aren't really any critical files in my memory card, so a simple copy of whatever's in the My Documents folder will do.
Click to expand...
Click to collapse
The advantage with using backup is it automatically throws it all into a simple single archive and saves things such as the label on your card but yes if you have a simple set up a straight copy is an option. Bottom line is that additional software isn't needed for microSD card backups.
Make that "memory => System => storage card..." ;-)
Nothing shows in the storage card tab. That's what I meant when I said the phone doesn't recognise the card.
Click to expand...
Click to collapse
Yes, you're right I missed the 'System'. Thats the place where I'd trust more than file explorer to actually indicate whether the card is being read. Let us know how you get on!
update
rigelstuff said:
Help! My Kaiser can't read my memory card!
...
Thanks in advance for any input.
Click to expand...
Click to collapse
I tested a friend's card from his TyTN II and put it into my phone and there was still no memory card detected. I gave him my card, and his phone was able to detect it.
I finally did a hard reset, reformatted my card, and the phone still can't detect the card!
It seems the problem may well be hardware-related. Looks like I'll have to send my phone in to HTC to be checked.
Thanks again to everyone who chimed in. 'will still give an update on how things go.
ta
Got my unit back from the HTC service centre. They had to replace the part that contacts the memory card. The old one was toast. And to think I've only had this phone for just over a year now.
Had to pay about USD120 for the part
i've had my memory card not read all the files on it two times now but recently i've kept the file heirarchy intact and havent made any new folders on the phone and it seems to be ok
hi guys this is my first post on this forum although i have been browsing around for a few months. my problem is that whenever i connect my phone to my pc and mount it, the computer recognises it but whenever i try to add files to the SD card or format it, the phone disconnects and i have to mount it again. once i have mounted it, the whole process starts all over again and now im stuck in a position where i cant do anything with it.
has anyone had his problem before and is there a way to fix it or is my SD card faulty? thanks in advance.
Are you rooted? If so, what rom are you on? Just give us some specs on what you got.
no im not rooted, im on the oem android software. i was just about to format my SD card so i could start rooting it.
Is it the factory sd card? Do you got another card to try out? If not, try to format the card in the phone and then try it again to see if it still does the same thing.
yeah its a factory SD Card. itried formating it from the phone and now i can add files to the card but it still disconnects whenever i try to format it. is the card protected or something?
djosiah said:
yeah its a factory SD Card. itried formating it from the phone and now i can add files to the card but it still disconnects whenever i try to format it. is the card protected or something?
Click to expand...
Click to collapse
You cannot format it through the USB by mounting it
ok how do i do it then? should i just use a card reader? or is there another way to do it by using the phone? also thought i would add that it has started doing it when adding files to the card again.
djosiah said:
ok how do i do it then? should i just use a card reader? or is there another way to do it by using the phone? also thought i would add that it has started doing it when adding files to the card again.
Click to expand...
Click to collapse
You can put it in a card reader if you have one. I would boot into ubuntu and do it that way, also if you are in ubuntu you can do it through your phone.
djosiah said:
ok how do i do it then? should i just use a card reader? or is there another way to do it by using the phone? also thought i would add that it has started doing it when adding files to the card again.
Click to expand...
Click to collapse
The phone has an option too. Go to
Settings > SD and storage > Format Card
Since your stock G1, the other phone partitioning/formatting isnt available
ok thanks guys i formatted the SD crad uising the options on the phone, which now leaves me to my next problem. i have download the Rc7 file and placed it on he root of the card but i when i power on the phone holding down the camera phone it doesnt show the grey screen with the flashing options, it jus shows the screen which tells me the board type etc. am i doing something wrong? sorry for all the questions.
djosiah said:
ok thanks guys i formatted the SD crad uising the options on the phone, which now leaves me to my next problem. i have download the Rc7 file and placed it on he root of the card but i when i power on the phone holding down the camera phone it doesnt show the grey screen with the flashing options, it jus shows the screen which tells me the board type etc. am i doing something wrong? sorry for all the questions.
Click to expand...
Click to collapse
it doesnt have flashing options
press the power button (not hold, just press) and it should say that its flashing the image.
(look in the center of the screen, there should be a line of text that says something)
DO NOT TURN OFF YOUR PHONE TILL ITS DONE FLASHING
Btw just chiming in case it comes up as it did in the past. If you use Swapper app and have a swapfile image located in the fat32 area, it would cause DC issues or not connect right, back then it never hit me that the swapfile was being torn away from a system that was looking for it, which then gave me corrupt sd errors. (Granted it wasnt) but yea, just another thing to look out for to those using a image file still for swap.
Also how did your flashing go?
Okay well this is my first time on this forum better yet my second day having the G1 and I've already seemed to get in trouble with this phone. Okay well I was attempting to jailbreak a G1 with no data plan. After I had put the Dreaimg file in my F drive I had to go to that rainbow screen and all. After that the phone was locked again so I activated my phone VIA WIFI using Jesus Freaks thread. Then after I got back in the phone I continued to attempt to jailbreak/root my phone so I tried to put the recovery.img and upload zip file in my F drive but it said something about an I/O error. I kept messing with it trying to think of solutions now when I try to click the F drive it says, "The disk in drive F is not formatted. Do you want to format it now?" when I press yes and check "Quick Format" it crashes my computer. I am on an XP computer. PLEASE HELP! ):
Well your first problem is that you are using windows.
Just playing, you could always try a card reader. Your card needs to be fat32. If your phone still reads the card, try going into sd in settings and format it through your phone, then retry it on your computer
Its in FAT32 thus I was trying to jailbreak it. Although my phone can't read it, as it seems. When I go to SD in settings all I see is "Total Space", "Available Space", "Unmount/eject SD card". And they are all dark so that I can not press it. And I'm sure I have an SD card in there.
Ok your card is possibely corrupted, since you do not have a recovery image we can't go that way to reformat, hmmmm, card reader, I know reboot your phone, it will pull up a notice that your card is not formatted and it will ask you to format it now right there on the phone
I just rebooted it nothing happened. Also another piece of info, the problem was happening yesterday as I woke up today my phone popped up a message saying Upload now? or something like that and I pressed yes and it fixed but I did the same thing, and tried to jailbreak it, and now I'm back to the same problem. ): Got AIM to help me faster?
Don't got aim. So nothing popped up, you updated by what the ota update if so you are back to your previous build, if you are having serious problems with formating, my best suggestion is a card reader, you can get one for like $15 at walmart. Or try a different sdcard
If you are feeling froggy and are broke, you can try downloading a linux distro and burn a live cd or use unetbootin to make it on a thumb drive. Ubuntu linux has a partion editor that would be able to read it no problem and format it and even partion it for you since you will prob want apps2sd and a linux swap
Ugh I'm a big noob at G1's as I've only had it for one day now. Do you have MSN? Yahoo? something please. I need live help I don't want to brick my phone.
I don't use any of the messaginers, sorry, but the only way you can really brick you phone is to mess up installing the danger spl, anything else you can come back from, the most I can offer is my # and walk you through that way but your easiest option would be the card reader
Eh, can you message me your number?
I'll pm it to you in a sec
Hi all
I rooted my phone today. I then installed clockworkmod and saved a stock backup. Following that, I successfully enabled 3 button recovery.
My problem appeared either after rooting or after clockworkmod. The problem was there prior to enabling 3 button recovery. I suspect it was clockworkmod that caused the problem.
Anyway, when I connect the phone to the computer the 16gb internal sd card & 2gb phone storage appear as removable drives in 'my computer'. However, double clicking on the drives gives the message 'no disk in the drive, please insert one'. Windows can't read the usable file space, browse or even format the drives.
However, I can browse the internal sd card fine using any android file manager.
Also, I can use adb to push/pull files.
What is going on?
I need to know quite quickly what to do. I initiated a phone repair with my carrier due to the mtp crash bug, so they are expecting it to be returned pronto. If the phone is stuffed, I'll send it back. If this can be fixed, I'll keep it since I managed to get the three button recovery working.
Also, I think there's a boot rom or something to do with clockworkmod still installed? How do I get rid of that if I'm sending the phone back. I know how to unroot.
Edit: I just found an external sd card to test. I formatted it in windows by using a sd card reader, then when I plugged it into the phone and tried it as a mass storage device windows didnt like it. Putting it back into the card reader one last time and windows recognised it. Makes no sense....
Edit2: In kies mode, kies can access it. And also it adds a 'galaxy s' to my computer where the internal sd card actually works... now I'm even more confused!
Have you tryed formatting your internal Sd or useing recovery 2e and factory resetting your phone?
I've tried formatting it and reset via settings->privacy->factory reset data.
Is 3 button recovery any different to the above type of reset? What will it roll the system back to?
(The recovery image I made in rom manager will have the same problem. I dont currently have an update.zip on my sd card due to formatting it, but I can get one on there using adb if I need to.)
quitestuck said:
I've tried formatting it and reset via settings->privacy->factory reset data.
Is 3 button recovery any different to the above type of reset? What will it roll the system back to?
(The recovery image I made in rom manager will have the same problem. I dont currently have an update.zip on my sd card due to formatting it, but I can get one on there using adb if I need to.)
Click to expand...
Click to collapse
Is your usb debugging on by chance? If so, turn it off ans reconnect the phone to the pc.
Mine does this when usb debugging is on and im on a stock eclair rom... Hope it helps...
Sent from my GT-I9000M using XDA App
That thought occurred to me too. Definately off. Ive checked it many many times now
When I first used adb, I simply pulled the plug out. I couldn't see any 'quit debug' command. There are start/kill server commands, they dont seem appropriate. Doesnt look like I should have had to do anything other than just pull the cable out.
Update:
I think that the update.zip's applied to my phone have changed some software to an earlier version that what my unit was shipped with.
When I first got the phone, I just plugged it into the pc and selected 'mass storage' on the phone. The drives then appeared (and worked) in windows.
Now, I have to click mass storage. That on its own isnt enough. But if I pull-down the tray menu at the top of the screen, there is another option to click (something along the lines of 'select this to transfer files between your phone and pc'). If I click that, it works.
There are some slight differences still:
1) I could swear that my phone originally allowed access to the 2gb phone internal memory (I never tried reading/writing to it, but I'm convinced windows displayed a 2gb drive).
2) I used to get the "xx/13.4gb free" under the drive letter in 'my computer', which I now only get in the status bar at the bottom of windows file explorer.
QUESTION
Does everybody else have to click "mass storage mode" AND pull down the task bar and click "transfer files" to get the internal sd to work as mass storage in windows?
Or do they just have to click "mass storage mode" and that's all?
Thanks
I always had to pull down the menu and manually mount the sd card when using mass storage.
Sent from my GT-I9000M using XDA App
Definately wasnt the case on my phone (bought mid october, so its quite new) because I got my music on there via mass storage twice before 'hacking' it. I couldn't have done that without knowing about the extra buttons to press. It's good to know that it's just a side effect of the update.zips I've applied, and that I get to keep the phone
Cheers
I am having an occasional but ongoing problem with loss of data from the SD Card in my Diamond II.
The card is an 8GB HC (http://cgi.ebay.co.uk/MicroSD-Micro...MemoryCards&hash=item3cb6213376#ht_1880wt_905).
Examples of the problem -
- I copied a complete directory of data from the PC to the card with the card in the PC. Data copied OK and was readable. But when I put the card in the phone the directory was still there but empty. When I then tried to re-copy the data to the directory over the USB connection, an error stating that the device was disconnected appeared on the PC - but I could still read other directories - so the directory was obviously corrupt - and could not be deleted from the card using the PC. I could delete it on the phone though.
This problem has occurred at least a dozen times.
- I have various music albums on the card. They show up in their correct 'album' on the phone. However occasionally after a restart of the phone some tracks appear in an 'unknown' album. If I delete the files and re-copy to the phone off the PC, they once again appear in the correct album. So it appears the MP3 tag is somehow being corrupted or 'misread'.
My question is - are these symptoms of a bad card, or is it possible there is a problem with the phone causing corruption of the card, and if so - what?
pewe said:
I am having an occasional but ongoing problem with loss of data from the SD Card in my Diamond II.
The card is an 8GB HC (http://cgi.ebay.co.uk/MicroSD-Micro...MemoryCards&hash=item3cb6213376#ht_1880wt_905).
Examples of the problem -
- I copied a complete directory of data from the PC to the card with the card in the PC. Data copied OK and was readable. But when I put the card in the phone the directory was still there but empty. When I then tried to re-copy the data to the directory over the USB connection, an error stating that the device was disconnected appeared on the PC - but I could still read other directories - so the directory was obviously corrupt - and could not be deleted from the card using the PC. I could delete it on the phone though.
This problem has occurred at least a dozen times.
- I have various music albums on the card. They show up in their correct 'album' on the phone. However occasionally after a restart of the phone some tracks appear in an 'unknown' album. If I delete the files and re-copy to the phone off the PC, they once again appear in the correct album. So it appears the MP3 tag is somehow being corrupted or 'misread'.
My question is - are these symptoms of a bad card, or is it possible there is a problem with the phone causing corruption of the card, and if so - what?
Click to expand...
Click to collapse
I would format the card (but I apprehend that you've done this already). If this makes no difference, and if the card works well on your pc-system, I would advise you to make a hardreset and/or flash a stockrom ...
Furthermore, to locate the problem it would be nice if you could test your TD2 with another card.
Good luck!
Thanks Braunie.
As I have re-formatted the card a few times, I don't think this will cure it.
The 'Seller' has agreed to replace it, so I sent it back today.
If I get the same problem with the new one I'll get a new 'branded' one and try that.
If that fails I'll have to try the hard reset etc. - but that would be a pain as I'd have to re-install the added software and re-configure it - but if that's what it takes......
Thanks again
pewe said:
As I have re-formatted the card a few times, I don't think this will cure it.
The 'Seller' has agreed to replace it, so I sent it back today.
If I get the same problem with the new one I'll get a new 'branded' one and try that.
If that fails I'll have to try the hard reset etc. - but that would be a pain as I'd have to re-install the added software and re-configure it - but if that's what it takes......
Thanks again
Click to expand...
Click to collapse
I have had similar issues where the card will work from the PC but not on the device and it turned out to be a bad card.
I have had similar issues where the card will work from the PC but not on the device and it turned out to be a bad card.
Click to expand...
Click to collapse
Here's hoping..........