Database Develop

IMATE PDA2K

I just bought the IMATE PDA2K and i am still exploring the device. The first problem i found is that i have a NAVMAN navigation software including the reciever model GPS 4410. I cant connect via bluetooth in the running software and have a fix on the satellite. On the bluetooth manage i can connect and the system finds it. Please can someone help me in this. I am running the second edition of microsoft windows.

I don't know if it might fix your problem but you should look at the imate club site in order to install the new ROM. In the ROM there are some fixs concerning the bluetooth (waiting time and more devices found), battery and other issue.
There have been a lot of negative feedback (check the imate forum to know more) regarding this new rom.
There should be also a One-off patch to fix just the Bluetooth problem (it shoud be available also on this site).

You should just "cook" your own Rom. That way, you can build your own rom just to suit your needs....not everyone's needs in general.
I too have a PDA2K but am running the 1.3.51 WWE w/WMP10, radio version 1.10, B/T build version 3900, w/Siemens SX 66 extended rom from this site. You can use an extended rom of your choice. I use the Cingular ext rom, as my service is with them.
That would help solve alot of your gps and b/t issues.
Do a bit of reading in the "extended rom kitchen" regarding this. There is a wealth of info to be found in this site.
Later...... 8) 8) 8)
p1227 said:
I just bought the IMATE PDA2K and i am still exploring the device. The first problem i found is that i have a NAVMAN navigation software including the reciever model GPS 4410. I cant connect via bluetooth in the running software and have a fix on the satellite. On the bluetooth manage i can connect and the system finds it. Please can someone help me in this. I am running the second edition of microsoft windows.
Click to expand...
Click to collapse

hdbueller,
I’ve got a PDA2k and am on Cingular. I’ve been pulling my hair out with this thing trying to figure out how to get a better ROM installed. When I try to install the latest Siemens ROM (with the hack to get past the Country Code Error) I get stopped up with an ERROR 100: DEVICE ID ERROR.
The ROM you describe sounds perfect. Any chance I can score a copy?

The rom has a header with the device ID in it, the seimens is PH20B1 if you downloaded the orginal rom, your device is a PH20B, thus the error.
Back on the ftp site there is a hacked version, lot of people played with it but then went back.
Next there is the thred with media player 10 in it, think this was another cooked version dont remeber what the base was for that rom, think it was the imate EDVO. Lot of reading, get the "final" version, also on ftp.

Upgrading and Unlocking a Siemens SX66

hello
very nice with a wealth of information.
i wanted to upgrade the roms and unlock my siemens sx66.
before i do it, i want to verify the manner in which it is done. from my readings it appears that i update the roms and then after they are all done then i unlock the phone.
i plan to backup the phone before all is done.
one of my main questions is that my wife also has one of the sx66s and we share contacts and the calender. we do this via active sync. will there be any issue with my phone having a different rom than hers with the syncing?
also, once all the roms are update, would i just restore from a backup or do i just place items back in.
i was planning on using the stable roms from the SX66 (Blue Angel) Standardization Project
thanks in advance for your assistance
bob

read wiki for the blueangel

thanks, will do

ok, i read the info provided and also found the sx66 standardization project webpage. that site is very dedicated to the sx66 that cingular wireless put out, which what i have.
the site gives good directions, but i have one issue. it says that you need to have all the same revisions for the main and extended rom. how exactly do i do that? do i just do the main and radio rom upgrade first, then the extended rom? i just don't want to mess up the phone by not doing something correctly.
thanks in advance,
bob

afaik you flash them all at the same time, but what it means is dont flash an extended rom for one ROM version also with with a different ROM version

got it done
followed the instructions on the sx66 standardization project -
unhid the extended_rom folder using the correct too then did a soft reboot
then put the 1.44.xx ext rom into the correct folder, after that ran baupdater with the 1.44.xx main rom and 1.15.xx radio rom. after all was done i did a hard reset and everything installed excellent

How is it Working?
Bob332, is your SX66 functioning OK, not problems? How is your BT, more stable, pairing ok? How did you know what upgrade to use as I am not finding a match for the Siemens model?

Re: How is it Working?
Dan0568 said:
Bob332, is your SX66 functioning OK, not problems? How is your BT, more stable, pairing ok? How did you know what upgrade to use as I am not finding a match for the Siemens model?
Click to expand...
Click to collapse
it is running nicely. as far as bt, i don't use it reguarily, but with the headset i have it works nicely - jabra bt800. i can say that it appears to run as good if not better than my wife's which is not modded at all. i get a good signal and it is just as stable as my wife's. i feel the newer roms have better wifi control and there are some additional features with them. i used the roms off of the sx66 standarization project webpage.

Bob, as the instructions seemed very clear I went for it. My device settings now read: ROM 1.42.00, Ext ROM 1.20.115, Radio 1.02.10 and
BT Stack 3900. Protocol 1337.35.
What did I do wrong? More importantly how can I get my settings to match yours – 1.42.126 & 1.15? When I attempt to load the Radio I get this error using BAUpgrade tool? Where do I go from here?
Which upgrade tool do I use for the Radio?

Dan0568 said:
Bob, as the instructions seemed very clear I went for it. My device settings now read: ROM 1.42.00, Ext ROM 1.20.115, Radio 1.02.10 and
BT Stack 3900. Protocol 1337.35.
What did I do wrong? More importantly how can I get my settings to match yours – 1.42.126 & 1.15? When I attempt to load the Radio I get this error using BAUpgrade tool? Where do I go from here?
Which upgrade tool do I use for the Radio?
Click to expand...
Click to collapse
read everything i have put up and d/l the appropriate files before going farther, then follow the 1, 2, 3 method at the end
here is the page - http://sx66-blueangel.home.comcast.net/SystemRadio.htm
use the blue angel flash rom tool aka - baupdate.exe and make sure both the system and radio roms are in the same folder as the the updater tool. during the upgrade, actually before it starts, it should tell you what versions you are upgrading to. also, this information and these roms are for a cingular branded sx66.
system and radio roms - system - 1.40.00 (source is dutch) and radio - 1.15 UK
unhide the extended_rom folder using the correct tool from this page - http://sx66-blueangel.home.comcast.net/Extended.htm (latest ext rom tools) and also read the pdf documentation located here - http://relaysgoldens.com/sx66/ext_roms/Extended_ROM_Installation_Instructions.pdf
then did a soft reboot
d/l the newest "pre-cooked" ext rom - 1.40.125
1. put the 1.44.xx ext rom into the correct folder after you unhid it on the sx66
2. run baupdater with the 1.44.xx main rom and 1.15.xx radio rom.
3. do a hard reset and the info from the new ext rom will be installed
this should get you set up

GPS not working - ho to test/setup

Hi all i installed RUU_Trinity_HTC_WWE_1.23.800.2_6275_1.35.00.11_Ship.exe
on my device and iu cant get GPS to work. I installed garmin Que, i have set it to use port 9 but it says that it cand find the GPS device. This is from a completly fresh rom, no settings changed. IS there anythig i need to check to get GPS working??? any help will be much apreciated

parisp said:
Hi all i installed RUU_Trinity_HTC_WWE_1.23.800.2_6275_1.35.00.11_Ship.exe
on my device and iu cant get GPS to work. I installed garmin Que, i have set it to use port 9 but it says that it cand find the GPS device. This is from a completly fresh rom, no settings changed. IS there anythig i need to check to get GPS working??? any help will be much apreciated
Click to expand...
Click to collapse
I think you must flash the dopod rom before flash the cooked...
Whait somebody to confirm that.

parisp said:
Hi all i installed RUU_Trinity_HTC_WWE_1.23.800.2_6275_1.35.00.11_Ship.exe
on my device and iu cant get GPS to work. I installed garmin Que, i have set it to use port 9 but it says that it cand find the GPS device. This is from a completly fresh rom, no settings changed. IS there anythig i need to check to get GPS working??? any help will be much apreciated
Click to expand...
Click to collapse
GarminQUE uses proprietary garmin protocol input/output from Garmin devices. So you can not use Qualcomm GPS chip that uses NMEA protocol in combination with GarminQUE. HOWEVER, you can "translate" the NMEA stream to GARMIN by installing GPSGate or GPSProxy that creates virtual COM port with Garmin or NMEA output translation. That's the only way to use GarminQue with your NMEA Qualcomm GPS-enabled Trinity
But first, you have to install the DOPOD D810 GPS enabled firmware. You can find it a few posts above.

thanks will update to ROM RUU_Trinity_DOPODASIA_WWE_1.23.707.6_6275_1.35.00.11_108_Ship.exe
found in the wiki page and there use this cooked rom.
However i have found and triend another GPS program, a trial, GPS tuner and i maged to get a gps fix and all working fine with it, so GPS is good .
Thanks for the info

setting for SPV M700 and tomtom 6.03

Sorry that I post the same thread twice, just need it to be solved as soon as possible.
Hi everyone, I just flash my SPV M700 to WM6, don't know what version it is, just show these when soft reset: R 1.16.00.00; G 32.53.7018.01H; D 3.00.
I have installed the latest TOMTOM 6.03, which supports built in GPS.
But I tried this GPS outdoor and never get connected. Always "NO GPS DEVICE".
I don't know if there anything wrong with this phone or if my setting is wrong.
I went into "external GPS",then "programs" to COM3, "Hardware" to COM9 and 115200,click on "Manage GPS automatically";
then I run TOMTOM 6.03, go to GPS status,configure the receiver to "Built in GPS receiver", go outdoor for 10 minutes. Always saying "NO GPS DEVICE!". about to be crazy....Plz could anyone help me?

Your radio is version 1.16, you´ll need to upgrade it to activate your gps, which is currently de-activated - choose radio version 1.46 or 1.50 - find it on the forum.
http://forum.xda-developers.com/showthread.php?t=325197
No settings will be lost when only upgrading the radio. When done upgrading the radio, TomTom will find the GPS with the setting you provided.
Regards,
theknf

tx man, prob is i can't flash radio.
got it solved though. Yes it's the problem of the radio, and seems that if your hard SPL version is 1.30, you are not able to flash the radio. everytime it seemed works but after flash the radio just remain the same.
this thread,http://forum.xda-developers.com/showthread.php?p=1483529#post1483529
there is a radio ROM with hard SPL which flashs the hard SPL first then the radio. I succesfully found the device and got GPS working yesterday!

Help!!! GPS Fail After Patch To WWE 1.82.707.0

Hi,
My GPS no longer working after patch ROM to WWE_1.82.707.0 (RUU_Kaiser_DOPODASIA_WWE_1.82.707.0_radio_sign_22.51.88.13_1.27.15.32_Ship.exe).
I tried both MapKing R12 and Garmin XT and also tried changing the registry, GpsGate and so on, still can not work.
The GPS light is flashing but MapKing and Garmin can not find the GPS device.
Can any guru help out here?
Details:
ROM version: 1.82.707.0 WWE
ROM date: 11/03/07
Radio version 1.27.15.32
Protocol version 22.51.88.13H

mine is working properly. Just try again in open sky. Be patience, it takes more time on first lock.

I tried but still can not, when I use MapKing to search for GPS, it manage to open the COM 4, but return "No GPS Found!"

Any feedback?

Hi, I had the same problem but with TomTom Navigator on a Kaiser. I tried all setting possibilities but nothing helped. After a hard reset, it was OK with automatic settings, nothing to change. Hope it helps.

try flashing a different rom and see if the problem still exists.
p.s. please avoid double posts about same topic !!

I flash back to ROM 1.81.707.0, still having the same problem. Should I go for WM6.1?