Database Develop

****** Experiment Gone BAD ******

Things were good for a while but now it all has gone to ****s.
My BA is having issues and not only with BT. I have managed to enable big store using exttools.exe and repart_doc.exe. The only issue is that I guess that has wiped the hidden rom where all the preinstall apps were.
To make a long story short, I had reinstalled the original rom, from a rom dump I did right when I got the device, however, the device, even after hard reset does not run the usual set up utilities that it did and install the junk my telco has included. While for the most part this was not a big deal now I realize that some of the fixes were needed.
For example I used to have BT xxx.3500 now I have xxx.3900 all find and dandy but with both versions my BT will not stay up for more than 2 minutes before it drops the connection.
On soft reset I get the following error message.
Cannot find "storage" ( or one of its components) Make sure the path and filename are correct and all the required libraries are available. Bugger
So now the question is - IS there a way of making these apps run and if so, how or is there another fix that can be done. MY BA is bleeding and it is dying and it is pissing me off.
After all the restores I can see the Extended_ROM on the PPC once again and all the apps in it, just can't run any of the darn things.
BTW, as my signature says this is BA from Telus and it is running on CDMA. which btw is missing from the WWE version on http://wiki.xda-developers.com/index.php?pagename=BA_Versions
Any insight would be appreciated.

If I understand everything correctly, you've effectively wiped the Extended ROM and are using it, along with your Storage as one big "persistent storage" folder on your BA, which is what those programs were designed to do. Everything you did, functioned as it was supposed to.
If this is not what you want, then you might try reflashing your device with the last ROM you got from your carrier and see if that restores everything.

I did just that, and I did flash the device with the "virgin" rom which I have uploaded to wiki. But somwhere along the line something just does not jive. While preforming a hard reset the device would normally auto config itself with all the junk that the telco has put on the device including a number of patches and what not. That function does not run anymore, which is what causing me grief. If I unhide the ROM I can see the files that are supposed to run, including the autoexec.exe all there. I try to unlock to copy these files and run them manually but I am not allowed to copy them anywhere. and while I try to use EXTTOOLS.exe to unlock the ROM thing just go south. It says that the ROM is unlocked but I am still not able to copy any of the files from the ROM.

szamot,
there is nothing availble yet for our phones to update them or make them any better...
I can't believe you tried messing with your harrier... just wait a while until sprint releases their update to the ppc6600. (fingers crossed) we should be able to do something then...
all of the roms you see here (so far as far as I know) are for gsm units, and their roms will NOT work with our cdma's. WAIT!!!!!
Hopefully you can get things back to normal.. otherwise your gonna have an expensive pile of nothingness to work with.
good luck.

as i side note wiki has 4 cdma roms.

Actually I uploaded the rom because it seemed to be the newest one at the time.2.04.00 WWE, I also upgraded the BT to xxx.3900 which all worked fine. However somwhere along the line the Ext Rom got screwed, even though I can see it I can't get at it. Not all is lost however I just procured the contents of the rom from a new device, and even though I run all the fixes and updates and patches the PPC still runs like crap. Even hard reset does not get the unit back to its original state.

HELP!!! Lost Extended_Rom

HEEEELLLLP!!!!
A few weeks back i ran the Wizard Extended_Rom Unlocker.
It worked and i saw Ext_Rom2....after sometime i decided it wouldn't do my anymore good to keep it viewable...so i decide to uninstall the unlocker cab. And after a soft reset, everything goes back to normal or i thought it did.
Today i decide to venture into Extended_rom again, and instead of seeing cabs and the config file....i see 3 folders with weird cryptic symbol names.
And when i try and open them i get an error saying
"Cannot open, either it not signed with a trusted certificate or one of the components cannot be found. You might need to reinstall or restore this file."
And this error happens for all 3 folders.
My wizard is working perfectly fine, actually better than it has ever done...but i'm just freaked in the event of a hard reset...
Any help on anything i can do to restore the extended_Rom...
btw...i'm running the Custom Tmobile 2.17 rom created by Xelencin.
and to reiterate...all i did was un-install the MyLovingWife unlocker cab and soft reset....i did not run that other "hide Extended_rom cab"
Much thanks to anyone who can help.[/b]

Is there a way to restore or re-import the extended_rom to replace my currently corrupted one?
Or is re-flashing the only way???

Me, myself and I also played around with the Extended Rom Unlocker Tools, also my Extended Rom got corrupted, it was 'writable', but also empty (I tried to install mine IIWPO.CAB in the Extended Rom, but because I got the newest Rom this was/is a problem). A hard-reset didn't work, you get the "welcome screen", but no customization, so reflashing is the only way to get it completely working again.

Thank you tho

rxr said:
HEEEELLLLP!!!!
A few weeks back i ran the Wizard Extended_Rom Unlocker.
It worked and i saw Ext_Rom2....after sometime i decided it wouldn't do my anymore good to keep it viewable...so i decide to uninstall the unlocker cab. And after a soft reset, everything goes back to normal or i thought it did.
[/b]
Click to expand...
Click to collapse
Had simillar issues after playing with ExtROM.
Format ExtRom with ResoExplorer resolved it. It can not actually format ExtROM, so comes up with an error, but then ExtROM got all CAB files back.
I think it might be, because some standard system call to format this media leads to recover FileSystem structure.
In reality media is protected, so you do not change anything on the media when writing or removing from/to it, it seems just to cache someweher and format function probably fush the cash.
PS: My OS version 2.16.something.
cheers,
maekel.

YES...that did it!!! Thanks...
now my question is...how do i hide the ext_rom again? I tried what i did before and just uninstall the unlocker, but when i go look it up with a reg-editor...Ext_Rom is empty...
i unlock again, and run the format and the files are there....so everything is there under Ext_Rom2.
Can i just leave it like this unlocked and in the event of a Hard-reset it will still work?
Will running the Lock cab work??

rxr said:
YES...that did it!!! Thanks...
now my question is...how do i hide the ext_rom again? I tried what i did before and just uninstall the unlocker, but when i go look it up with a reg-editor...Ext_Rom is empty...
i unlock again, and run the format and the files are there....so everything is there under Ext_Rom2.
Can i just leave it like this unlocked and in the event of a Hard-reset it will still work?
Will running the Lock cab work??
Click to expand...
Click to collapse
Change registry flag.
HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\TRUEFFS_DOC1\MountHidden=1

Is this with the ext_rom locked or unlocked??
Shouold i un-install the Unlocker cab then do the registry edit.

I did the reg change...
The Ext_Rom still shows blank.

rxr said:
Is this with the ext_rom locked or unlocked??
Shouold i un-install the Unlocker cab then do the registry edit.
Click to expand...
Click to collapse
I think that CAB is just changing couple of registry entries.
You can easily remove it and never use it again.

rxr said:
I did the reg change...
The Ext_Rom still shows blank.
Click to expand...
Click to collapse
HKEY_LOCAL_MACHINE\System\StorageManager\AutoLoad\TRUEFFS_DOC1\Bootphase=dword:00000001
HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\TRUEFFS_DOC1
1\MountHidden=dword:00000001
HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\TRUEFFS_DOC1\Folder=""
I beleive you should not see it anymore

Extended ROM will not load during hard reset
I have searched the forum for several hours, but I could not find a solution to the issue I am having. When I do a hard reset, hit send to begin the format, I get an error saying FORMAT Failed, so it boots back up as if it was just a soft reset. I really need a hard reset, but I am not sure how to make this happen. I have reloaded the ROM several times, but it still does not take and comes up just like a soft reset. I went into bootloader and flashed it that way, but still no go. If anyone could help me find a way to rectify this issue, I would GREATLY appreciate it.

faria-3.2-beta-4 [close beta testing-at the moment...]

you will require a password to access the rom[only by email].depending of the feedback in the next few days,the roms will be made public.
all tester that applied will receive an email with the instrucions.
and i dont need to remind you that your device need to be cid unlocked to avoid problems.
download 12mb paging pool from here
download 8mb paging poll from here [coming shortly]
Change log for beta-4
Button issue fixed
Htc calendar fixed
Smart flash –app to play swf files
Updated total commander
Updated task manager
Updates battery status
Updated core player
New startup image
Removed 2 problematic apps
PDF icon fixed
Some adjustments under the hood
Flash7 bug fixed
New performance tweaks
More operators cabs- [see the end o the document[
Bluetooth stereo is in this beta and working by default, so no need for extras cabs. Just pair your device.
i can also confirm that this ro works with dual sims cards
operators setting in the rom for;
USA
[USA_Cingular ]
[USA_T-Mobile_VPN]
[USA_T-Mobile_WAP]
UK
[UK_O2_Contract]
[UK_O2_PAYG]
[UK_Orange_Contract]
[UK_O2_Contract]
[UK_Virgin]
[UK_T-Mobile]
[UK_Jersey_Telecom]
[UK_cable&wireless]
FRANCE
[france-SFR]
[france-Bouygtel]
[france-OrangeWorld]
Portugal
[Portugal_Optimus]
[Portugal_TMN]
[Portugal_Vodafone]
NEDERLANDS
[Nederland_KPN]
[Nederland_Orange]
[Nederland_Telfort]
[Nederland_T-Mobile]
[Nederland_Vodafone]
NORWAY
[Norway_Netcom]
[Norway_Tele2]
[Norway_Telenor]
NEW ZEALAND
[NZ_TelstraClear]
[NZ_Vodafone]
SOUTHAFRICA
[SouthAfrica_MTNSouthAfrica_MTN
[SouthAfrica_CellC]
[SouthAfrica_Vodacom_WAP2.0]
.................................................................................................
troubleshot;
If you uninstall or delete the auto run file please delete [PPCInstaller.lnk]
In the startup folder
.................................................................................................
cabs below are only for cingular networks
rename the files extencions to .cab

Thanks Jose! I'll be loading this later on my Wizard

Is this safe for g4 owners ?

Perfect Timing!
Hi Faria,
Perfect timing to release this new beta rom just for the weekend. I'll be playing around with this ROM the coming weekend.
If you have some time, can you explain why the installation of this ROM has some manual actions like executing am autorun.exe from the My Documents folder.
I'll keep you informed about my results with this ROM.
Kind regards,
Nico Dekker
The Netherlands

Great work. I'll download this rom today and test it.
I'll keep you informed about my results with this ROM and my bluetooth stereo

Just installed the new release. Very cool startup screens. Installation went flawlessly (install rom, run autorun.exe, run operator config). Paired my Plantronics 590 Stereo Headset and I'm now listening to music in strereo! Thanks for resolving this!
Post more as I try it out.
Thanks!!

nicodekker said:
Hi Faria,
Perfect timing to release this new beta rom just for the weekend. I'll be playing around with this ROM the coming weekend.
If you have some time, can you explain why the installation of this ROM has some manual actions like executing am autorun.exe from the My Documents folder.
I'll keep you informed about my results with this ROM.
Kind regards,
Nico Dekker
The Netherlands
Click to expand...
Click to collapse
sure,
due to this rom has the security desabled by default ,for some weird reason this autorun file does not work with comands from the extended rom.
but im trying to get rid of the auto run for good.
i does work if the rom has security enabled ,but then when it finishes installation it turns the rom security on by itself!!!!
i have allredy send this bug to the develpors of the autorun file.they are investigating.
plus i moved the autorun file from the extended rom because some testers could not run it in the last beta.

G3 device
Faria,
can I put this ROM to a G3 device ( IPL 2.26 SP 2.26, Molski 30 Mb ROM )
Thanks

cptcafne said:
Is this safe for g4 owners ?
Click to expand...
Click to collapse
it is safe since the rom has no bootloader integrated.but i dont know if u are able to install.since people with g4 have trouble installing 3.2. roms.
most liklely because is cid locked.
u can unlock cid in a g4 at imeicheck uk or something like that.
nevertheless a would keep an original rom from your carrier for recovery purposes or make an sd backup.

patek said:
Faria,
can I put this ROM to a G3 device ( IPL 2.26 SP 2.26, Molski 30 Mb ROM )
Thanks
Click to expand...
Click to collapse
yes .u will have no trouble.

Working more with the ROM....
The operator config doesn't seem to be working for me. I did do the autorun.exe first and then ran it. At the end, it rebooted. I soft-reset and re-ran the operator file (USA_Cingular), and still don't see the definitions in the settings as I did with the last ROM release.
Ideas?

saeba said:
Working more with the ROM....
The operator config doesn't seem to be working for me. I did do the autorun.exe first and then ran it. At the end, it rebooted. I soft-reset and re-ran the operator file (USA_Cingular), and still don't see the definitions in the settings as I did with the last ROM release.
Ideas?
Click to expand...
Click to collapse
the last rom had 2 files for you carier.this one has one that i found in the xda.maybe thats the problem.if you want i can send you the last rom files.

Another item....
Registry Wizard doesn't seem to run: "Am unexpected error has occurred in Registry Wizard.exe." Related to the operator config?
Thanks!

Can't wait to test it!
After all the positive feedback I read from the initial testers, can't wait to test it myself.
Anyway Faria, thank you very much for investing the time and energy in these kind of initiatives!
Best regards,
Brian.

faria said:
the last rom had 2 files for you carier.this one has one that i found in the xda.maybe thats the problem.if you want i can send you the last rom files.
Click to expand...
Click to collapse
Are you referring to the tweaks.cab file you sent? I still have that. If not, yes, please send the files.
Thanks!

saeba said:
Another item....
Registry Wizard doesn't seem to run: "Am unexpected error has occurred in Registry Wizard.exe." Related to the operator config?
Thanks!
Click to expand...
Click to collapse
read the documents that i have email- you, and you will find out why is not working in your device.
the cab files for your operator are in the first post.

Hi,
Can I install in this rom the Ringo software. In the last one it made wizard crash, only with one hard-reset I solved that problem.
Thanks and great work

Just installed the version
So far so good. Works well. Installation took less than 10 minutes, and only got stuck at 99% for about 2 minutes.
One small thing that looks like a bug is when I try to close the task manager, it won't let me and then I have another task manager in the icons in the bottom of the screen. Is this a real problem or am I using it in the wrong way?

Download, and flash went along perfect. Followed directions exactly. After Extended Rom was installed, and device reset, got the error message "Cannot execute calnot.exe" Then installed my operator settings (US-Cingular) which evidently didnt work correctly - no big deal. After that soft reset, got the error message "cannot execute repllog.exe" I have since soft reset again, with no errors. Off the start, the only thing I see that I dont like is the new clock in the top right. It is cutting the year digit off. Is there a way to just revert back to the standard time? I have alos noticed the task manager quirk as described in the above post.

bradsnw said:
Download, and flash went along perfect. Followed directions exactly. After Extended Rom was installed, and device reset, got the error message "Cannot execute calnot.exe" Then installed my operator settings (US-Cingular) which evidently didnt work correctly - no big deal. After that soft reset, got the error message "cannot execute repllog.exe" I have since soft reset again, with no errors. Off the start, the only thing I see that I dont like is the new clock in the top left. I have alos noticed the task manager quirk as described in the above post.
Click to expand...
Click to collapse
the task manager has been descussed in beta 3 that is the way it works.to exit taskmanager go to options/exit,
to remove the clok or date use registry wizard.

Bluetooth broken after installing WM6

Hi all,
Finally WM6. Great!
But after installing the Tofclock ROM, my device became unstable like many others have reported. So when C_Shekar published his ROM, I installed it.
No problems on stability anymore, but after this upgrade I can no longer use my Bluetooth functions properly.
I can pair with my GPS, but as soon as I try running GPS software the device becomes slow and will reset after some time. After that, only turning bluetooth on will cause a reset, no matter if I'm paired or even using it at all.
So I re-installed the Tofclock ROM, because there I had at least GPS. But now it was no longer working there either.
Today I even downgraded to AKU3.5 and even a 'pre-historic' version of 2003 (1.70) but it does not work anymore for any of the ROMs.
Can someone please help me on this one. I understood from other posts that I'm not the only one, so it's not just my Hima. But I really would like to have my GPS back.

rvdrijt said:
Today I even downgraded to AKU3.5 and even a 'pre-historic' version of 2003 (1.70) but it does not work anymore for any of the ROMs.
Click to expand...
Click to collapse
Which indicates that it is an hardware failure and not a software problem.
Flashing the device with another ROM version does not destroy any hardware at all.
Sascha

Thanks for your response.
But if it is just a hardware problem that can't be caused by an upgrade, how come I'm not the only person experiencing the same issue that started at the same time?
If it was just me it simply could have been bad luck.......
I'm just still not sure of my conclusions, but everything points at the upgrade to WM6. Let this be a warning!

I have not seen any similar reports in any threads before. Can you link us to specific messages?
It is very well possible that it's a software problem. After all you're probably using the same GPS/BT software in all these ROM up/downgrades you tried?
My GPS software is entirely on my SD card, after flashing a new ROM and formatting my RAMdisk it instantly knows my last position. Your software has IMHO probably messed up some file on your SD card that's related to your BT/GPS settings or so. I advice you to format your SD card, reinstall the clean GPS software on it, see if it still misbehaves.

http://forum.xda-developers.com/showthread.php?t=332945&page=17
You also entered a reply back then ;-)
I will re-install my GPS software. However, I've tried other programs as well with the same result (i.e. Speed Sentry). But that might be because I tried it after a first reset. And the reboot also appears when I have a different SD card in the slot.
Right now I'm waiting for my backup battery to be empty. Who knows, a 'real' hard reset might help.

@Maggy
Seems you were right! Removing the battery didn't work so I checked my GPS program's files. I found a recently changed file for the config and after I removed it it seems to work again!
Still a big puzzle why it started when I changed to WM6. But I'm updating my ROM at this moment so I hope to be able to answer the question if it is WM6 related soon.
Thanks for the help!

You're welcome.
And yes, you're right that I replied to that post but my memory is in my PC and XDA, not in my head
It's possible that there's a tiny difference between the way the config file is written in WM6 or WM2003, so switching from one OS to the other messes the file up.
I have the good habit of formatting the SD card when I flash a ROM.
Glad this item looks solved.

Even better: it doesn't look solved, but it is solved.
I went home using my GPS! YESSSS!
Knowing this it's time I start cooking my own ROM......... thanks to all the great people at this forum.

Hello All
After having read the message, I just try TOMTOM 6 with RBT2001 and have the same problem, tomtom is very slow, and after some time soft reset.
And I have this problem with the new ROM: 7.0c.40CS (WM6 AKU 7.0)
And I had no problems with the ROM: 7.0b.40CS (WM6 AKU 7.0)
If this can help you understand the problems ?

I guess you should delete \Storage Card\ttnavigator.bif, then reinstall Tomtom

It's even much simpler: simply delete the \TomTom Navigator 6\navigator.cfg file. You'll have to redo some configuration, but it works great again.

rvdrijt said:
It's even much simpler: simply delete the \TomTom Navigator 6\navigator.cfg file. You'll have to redo some configuration, but it works great again.
Click to expand...
Click to collapse
Good.
Tomtom work again.
Thank you

beejive starting -> netcfv35.messages.de.wm.cab

hey guys.
when i try to start the pre installed beejive with my raphael with win mobile 6.5 (EnergyROM 3.0 'Phoenix' (21812)) there is some wired message telling me to download the "netcfv35.messages.de.wm.cab" to get the full error. i have done this. still same ****. havent found anything on inet/xda developers. tried SEVARAL roms/win mobile versions. still no solution. i am wondering if i am the only one.....?!
what i am wondering about is: why does this app tell me to download the DE version(is the code for deutschland - germany). well i am german. but how does the raphael know? i havent installed a german tool. nothing!
maybe some solutions or suggestions!
ty in advance

I dont think beejive works with WM6.5. i had the same prob and had to stop using it. Maybe theres a work around?
EDIT: i was looking for something else and came across a fix for it i tried it out and it works! heres the link
http://forum.xda-developers.com/showthread.php?t=421821

have the same error with win mobile 6.1.
also it is pre installed on a 6.5 rom. why should the chef do this if it would not work?!
i tried the same patch few days ago. didnt worked for me. how have you done it?
beejive was pre installed. than i installed the 1. LennySh_SQLCEMobile_3.0.CAB after this the 2. BeeJive_Fix.CAB
still same error..

I had the same issue, and also with TrackMe. The Energy ROM I'm using has .NET 3.7 cooked in. I got BeeJive (and TrackMe) working by installing .NET 3.5 and SQLServerCompact 3.5 core. Once I installed them, both BeeJive and TrackMe worked without any problems.

ocblazer949 said:
I dont think beejive works with WM6.5. i had the same prob and had to stop using it. Maybe theres a work around?
EDIT: i was looking for something else and came across a fix for it i tried it out and it works! heres the link
http://forum.xda-developers.com/showthread.php?t=421821
Click to expand...
Click to collapse
worked like a charm

adoute said:
I had the same issue, and also with TrackMe. The Energy ROM I'm using has .NET 3.7 cooked in. I got BeeJive (and TrackMe) working by installing .NET 3.5 and SQLServerCompact 3.5 core. Once I installed them, both BeeJive and TrackMe worked without any problems.
Click to expand...
Click to collapse
I have just installed the latest version of windows 6.5 energy rom and can no longer get pockettwit to work get the NETCFv35.Messages.EN.wm.cab error. Installed the cab but still dont get the complete error msg. So is the problem because the rom has .NET 3.7 cooked and not .NET3.5? If so is the solution the same as you have above? and if so where i do i find .NET 3.5 an SQLServer...
and install them?
Love the new energy ROM so much quicker etc - though does eat the power

These are the cabs I used to install .NET 3.5 and SQLCE on the 2009/6/13 Energy ROM (standard). I simply installed .NET, then SQLCE, then soft reset. BeeJive (and TrackMe) worked fine after the soft reset. I did not do anything else - both the cabs installed fine.
The forum won't let me attach the .NET cab... The filename is "NETCFv35.wm.armv4i.cab". I'm sure that I found it somewhere here at XDA, so it shouldn't be too hard to find.

nope.
I installed .NET, then SQLCE, did NOT work. (using energy rom 3.0)
maybe someone is going to need this:
NETCFv35.wm.armv4i.cab
http://rapidshare.com/files/77805623/NETCFv35.wm.armv4i.cab
edit
and YES i did a soft reset..

zotero said:
nope.
I installed .NET, then SQLCE, did NOT work. (using energy rom 3.0)
maybe someone is going to need this:
NETCFv35.wm.armv4i.cab
http://rapidshare.com/files/77805623/NETCFv35.wm.armv4i.cab
edit
and YES i did a soft reset..
Click to expand...
Click to collapse
Strange. It has worked for me 3 times in the last 10 days (trying various software, not liking it, hard reset).
The only thing I can think of is that my sashimi autoconfig installs the SQLCE cab. After sashimi has finished, and I've done some manual tweaking, I soft reset, install .NET 3.5 & SQLCE, soft reset, then everything just works. It is possible that there is a soft reset between .NET and SQLCE - I'm not entirely sure, but its worth a try.
Thanks for linking the .NET cab. For what it's worth, the version I install is 2.58 MB (2,707,308 bytes). Is it possible that yours is different?
I hope you find a way to get it working.

this file got exactly 2,707,308 bytes, too.
well. now i am going to deinstall beejive SQLC an .NET. then install SQLC (softreset) .NET (softreset) beejive (softreset).......nope. still not working. damn it.
just realized that msn is working. maybe my icq contact list is too big? going to try an other account..
edit
icq with 5 contacts working fine. WTF!?

this post is really old. but now i found out whats the problem:
after A LOT of research i GUESSED that a problem might be some strange user names in my contact list. i am talking about characters like this ****: ÐØΓťšĹĦĨ (just examples..)
i changed their 1337 h4xx0r!!1111oneone names into something normal...
now its working
maybe this is going to help somebody.

Minature BeeJive
Is anybody elses BeeJive realllllly small when you enter the chat feature like so minature you can barely see the avatar or is it just mines? Thats the only thing i HATE about the Fuze does anybody have a fix or a tweak thanks

after installing google traslator i get massge i have to install first NETCFv35.win.armv4i.cab
yet wile installing the NETCFv35 i get error i need first to start google this is catch22 !!!
any help ????/
thanks
baki69

NETCFv35.Messages.EN.wm.cab
If you are having trouble making the error messages to work with NETCFv35.Messages.EN.wm.cab you might want to try to remove \Windows\System.SR.dll (backup, of course) and then installing the messages cab.

NETCFv35.wm.armv4i.cab and others...
im doing a forum search to try to find out what these netCFv..etc files are for but havent really figured it out. there are a few different ones out there, dont even know which I would need.
Ive also had programs tell me to install these net files before, but Im hesitant to start searching out and installing things I dont understand.
Im using stock rom (havent updated yet) for T Mobile USA HD2, with Cookies installed.
Any love for a noob?

zarp said:
If you are having trouble making the error messages to work with NETCFv35.Messages.EN.wm.cab you might want to try to remove \Windows\System.SR.dll (backup, of course) and then installing the messages cab.
Click to expand...
Click to collapse
i have the messages cab installed, well it tells me it is anyway
i get that same error BUT i can't locate the file you mention, where should it be ?