how to limit recent program list? - Tilt, TyTN II, MDA Vario III General

is there a way of limiting the number of recent programs that show up?
thanks

I'm guessing you're looking for helpful registry locations to check out, and I can't help there. My only thought was changing the number of programs always displayed on the front page (Start,Settings,Menu, tick/untick the apps you always want displayed).
I realise this isn't an ideal solution, or possibly even useless, but it does sort of meet your requirements in that the more programs you have 'stuck' permanently to the start menu directly effects (affects?) how many 'recent' programs can be displayed...

Anyone else ever figure this out? I intentionally pair down my start menu, but now it is the entire vertical length of the screen because of the recent programs list. I've searched here and google.

You need to install this cab file. It will delete the recent programs entries when you soft reset.

Excellent, thanks for the help.

newbie2 said:
You need to install this cab file. It will delete the recent programs entries when you soft reset.
Click to expand...
Click to collapse
Hmmm, mine seems to do this anyway - which I don't always want. Wonder if there's a setting somewhere?

thanks, but i dont softreset my device so often. it would be nice if they were a reg hack or so to limit it...
thanks

cleartemp deletes them when every you want///

Related

Button lock always returns after soft reset

Hi guys, I am having some little problems with my Xda2i as following.
1. I use button lock to stop using the camera button (as I always accidentally touch it then camera starts, many time I open camera without notice for long time till my battery almost gone!!) Every time I soft reset, it always turn to defalut mode.
2. Also the same happen with "today". I show some items such as Worldmate. When soft reset, it disappears (though I ticked to show it always)
3. Favorites network also the same, ticked it then changed after reset.
Could anybody please help me?.
Many many thanks in advance..
do what i have done removed the camera from my start up prgrams and allocated the button to none that way it can't activate
as for the others i'm not to sure ,i'm sure some1 else will be able to help
Sounds like somehow the registry has become read only. Have a look in the startup folder and see if there any programs in there that shouldn't be running. Also has this started after some program has been installed?
Hi Pug, checked my startup and found below program lists
-camera_detect
-checkautorun
-clear_notify
-IA_CID_start
-PHM Traylaunch
-PhotocontactPro
-Pocketnavy
-poutlook
-RunBT
-spb GPRS monitor
-STK
It seems like you doubt, it happens after program installation.
Any more advice?
Many many thanks
I don't doubt you at all, just trying to help you solve this.
PHM hasn't got a registry restore feature has it? If it has try disabling it. I don't use it so I don't know.
Don't know what that Pocket Navy is so can't comment on that.
If you delete Camera_Detect you can assign the camera button to something else if you want and the button assignment will survive a soft reset.
Sorry for my aweful english, Pug.
This problem wa before PHM installed, it should be ok (anyway I am not knowledgable to know if it has registry or not. I am too new hands)
Pocketnavy is "CloseAll" I like it more because it has window to see running programs and can select to close which one. THe most important is it free.
I will try to fix it as you recommend. Very appreciated your time to help.
Thanks again

Recently Used Apps menu

Can someone tell me how to "clear" the recently used apps when you hit the start menu? I find it cluttering and would like to clear it if not eliminate it altogether. Any ideas? Thanks!
sometimes help soft reset, but not everytime..
there is a software.. called.. "clearmenu", or "clearitem".. or just "clear" which is attached to many cooked rom, that is to be installed to your Windows/Startup folder.. which will clear everything in your most recent used list on every soft reset. You can clear it without soft reset, in case you are wondering. and soft reset will not do the job if you dont have the software.
i do not want to spam this thread and discuss it with you, but do not agree with
and soft reset will not do the job if you dont have the software.
Click to expand...
Click to collapse
. this is not true...
patr!k said:
i do not want to spam this thread and discuss it with you, but do not agree with . this is not true...
Click to expand...
Click to collapse
interesting.. but can I check with you the OS that you are using? Or, better still, you just go into your "\Windows\Start up\" to check if there are anything there, that starts with a 'clear'?
Anyway, since you said "sometimes" soft reset works, I would assume that it is not a repeatable process. If that's the case, probably that the 'sometimes' is the case where the regsitry got messed up and the 'recent used list' gone, and hence coincidently it worked as you wanted to.
Anyway, it is quite a new discovery, but just check with me the `start up` menu (better still, list everything there, can't be too much stuff there), to see if there are any working ones there.
ok, what i want to say is that clearing with apps you mentioned is not only one solution and as you correctly typed, it is done only "sometimes" and i was never trying find out when this happened (or why). now correct?
Help
Ok, guys, there has to be a better way to clean out the recently used apps menu. Anyone???
there is a registry hack... anyone????
Use MortScript and create a text file called cleanup.mscr and place the following in there:
Code:
ErrorLevel off
RegDeleteKey HKCU,Software\Microsoft\Shell\TaskSwitch,1,1
Place this file in \Windows\StartUp and it will clean up the Recent Menu Items in the Start Menu at every reboot.
big thanks!
do you happen to know the reg location of "recent programs" listed in "start"?
Delete the string entries in HKEY_CURRENT_USER\Software\Microsoft\Shell\TaskSwitch then soft-reset. That'll get rid of the recently used app list on the Start Menu.
I have been using the attached file since I had my Wizard and it works great on my Kaiser too! Just put the "startclean.exe" in your "\windows\startup" folder and it will remove the most recently used apps from the menu after each soft reset.
Someone posted this file a long time ago and I can no longer find the thread.
Use this program !!
http://mobile-sg.com/software/?p=ClearTemp&platform=ppc
soft reset is OPTIONAL !!
Maybe I am overlooking something... but, is there a way to permanently prevent recently used applications from showing up in the Start menu?
Thanks!

New WM6/Tilt user, please help!

Hello-
I'm new to Windows Mobile (I've been on Palm OS for at least 5 years) and I have AT&T Tilt (8925).
I've been playing around with it for a while, and there's still some things I have questions on-
1)How do I complete remove some programs that I do not want and don't appear under "Remove Programs"? I know they're located in the Windows folder, but I get a Error 5 whenever I try to delete them- I think they're read-only or something...
2) I'm also having problems with the GPS receiver. At times it will work great, acquiring a signal in seconds, and other times it won't work at all, searching for a long time to find nothing. I use Live Search and Google Maps and have the same problem with both.. Any ideas?
3) Coming from Palm OS, I'm used to text messages coming up in a view. Is there a way to change that?
4) I modified my PTT button to work as any program. Is there a specific registry key I can set it to so that it acts as a power button?
5) I use gmail and I'm using their IMAP service. Some of my messages are appearing blank when downloaded. Was I supposed to change settings or something? Why does it only work for some and not others?
6) And last but not least, does anybody have any good mod/util programs to recommend?
Thanks for your help
Also,
7) Does anyone know how to disable the sound on the 3G launch screen when the device reboots?
I havent got too many answers to your questions, but this would be a sart at least.
KaiserTweak has many necessary customizations (but I dont think it addresses most of your questions.)
http://forum.xda-developers.com/showthread.php?t=333898
The apps you want to remove sounds like the Cingular built-in ones. In that case you can avoid installing them by doing a hard reset, and rebooting before it installs the carrier customizations.
This article gives a step by step howto.
http://tiltsite.com/2007/10/how-to-beat-the-bloat-on-your-att-tilt/
Also this page was useful in getting my GPS problems sorted out. The GPSTEST software seemed to cure the problem all by itself (and its freeware)
http://www.expansys.nl/ft.aspx?k=100176
Surur
Yeah, I've got KaiserTweak already, I love it.
In terms of the "bloatware", that is indeed what I want to remove, but there's also some that I want to keep... Is there a way to remove programs that arent in "Remove Programs"?
Not AFAIK, but the actual AT&T apps are available as a separate cab in this thread.
http://forum.xda-developers.com/showthread.php?t=332438
Unfortunately they are still bundled together, but at leas they can be cleanly uninstalled.
Surur
PTK8ofBH said:
Yeah, I've got KaiserTweak already, I love it.
In terms of the "bloatware", that is indeed what I want to remove, but there's also some that I want to keep... Is there a way to remove programs that arent in "Remove Programs"?
Click to expand...
Click to collapse
Even after bypassing the bloatware install, the CAB files should still be on the device for you to install them on your own. Might take a bit of digging to find the proper ones and you may need something like Resco Explorer, or Total Commander to "see" them. I think the built in file explorer hides some of the system files, but I couldn't tell you much more than that.
Thanks. The GPS Fix doesn't seem to do much- am I missing something?
PTK8ofBH said:
Thanks. The GPS Fix doesn't seem to do much- am I missing something?
Click to expand...
Click to collapse
Are you able to run it. You should be able to use it to test the function of your GPS device, and find out what port it uses etc. Its a smartphone program, so you have to use it using the keys, not the touch screen.
Surur
It seems to help and it's definately a very useful app. I'll let you know if my problems persist.
Does anyone have any ideas on the other issues I'm having?

How to change the main menu soft button?

Hi,
I have a Treo 750v (Vodafone version) which like what it's box said it is meant for email solution, that's why the left soft menu of the Today screen menu is set to Email.
Anyone know how to change this?
Thanks, appriciate your share of knowledge!
I forgot the details but this i know as much
You have to download the register editor program. Search around the registry is all the same when it comes to changing soft key for all WM phones.
The only problem with the Treo 750 is when you change the softkey from email to something else it ends up adding an extra short cut. So in essence you are not overwriting that key, all you are doing is adding an extra feature on top of the existing email button.
Maybe someone had better success than I did can chime in
Using a registry editor, navigate to Hkey_Current_User/Software/Microsoft/Today/Keys/112
Change all 3 values to reflect your new function
or:
http://wiki.xda-developers.com/index.php?pagename=Universal_Registry
awesome!
mtiberio said:
or:
http://wiki.xda-developers.com/index.php?pagename=Universal_Registry
Click to expand...
Click to collapse
wow, thank you very much mtiberio!
your link really hit the spot!
Very odd - my Registry setting for 112 was already showing Calendar as the default value but on screen it shows email.
tinyflier said:
Very odd - my Registry setting for 112 was already showing Calendar as the default value but on screen it shows email.
Click to expand...
Click to collapse
It's all because Palm plugins - they overlay it. If you disable Active Call (or Dial Lookup?) you can have native-windows softkeys. It was all described in instructions how to ged back default dialpad.
i just downloaded the soft key changer that i found on here i think it was in the hermes section and copied it to my windows folder... after i did that it shows up in my settings and i can change both soft keys to what i want
was it:
"FdcSoft SoftkeyAppletEx.cab"
Gyngabread Man said:
i just downloaded the soft key changer that i found on here i think it was in the hermes section and copied it to my windows folder... after i did that it shows up in my settings and i can change both soft keys to what i want
Click to expand...
Click to collapse
it would be great if you share the file or where you get it, so we all can get it too...
mtiberio said:
was it:
"FdcSoft SoftkeyAppletEx.cab"
Click to expand...
Click to collapse
it is caled softkeyapplet but its not a cab it was a zip i just unzipped and put in my windows folder i believe... i will look in my external driveand post it im not sure where it is but i'll try to find it
ok i found it on my drive but i did some searching on the forums and alot of ppl mention it but dont upload it and im guessing its for good reason... dont wanna piss ppl off by posting something i shouldent if its ok though then i'll do it but i think its the same one your talking about for me it worked like a charm no reg editing
Here it is:
http://forum.xda-developers.com/attachment.php?attachmentid=65261&d=1199898052
Found it here:
http://forum.xda-developers.com/showpost.php?p=1802007&postcount=827
You will need to reset your device for it to show up in your programs list.
Chillin said:
Here it is:
http://forum.xda-developers.com/attachment.php?attachmentid=65261&d=1199898052
Found it here:
http://forum.xda-developers.com/showpost.php?p=1802007&postcount=827
You will need to reset your device for it to show up in your programs list.
Click to expand...
Click to collapse
Hi, thannks for the direct links. I'm going to try installing it. i hope it'll be fine.
seems it doesn't work with wm6. after installing it, the program isnt available in my program.

Can't remove Batti battery % in start bar.

After upgrading my kaisers os to a new cooked WM6.1 with manilla 2d on it, I no longer had room on my today screen for batterystatus. So, I decided to try out batti since it seems to be so popular as a battery indicator only to find that it puts a nice little battery % indicator right in the same spot as HTC task manager puts the x button. Since I find task manager to be slightly more useful than batti I decided to remove batti. The problem is is that even though batti has been removed and I searched through my registry and removed all leftover registry keys for batti, the % indicator is still there. Does anyone have any idea how to get rid of it?
Personally, I would open up the batti cab file and take a look at exactly what files and registry entries batti creates to make sure they're all gone. One registry entry that I can think to look at is HKLM\Security\ResOver\Bitmap\ and hunt down the dll listed there and see. Also, I'm sure you have soft reset since removing, but I'll throw it out there just in case.
KMFM$ said:
Personally, I would open up the batti cab file and take a look at exactly what files and registry entries batti creates to make sure they're all gone. One registry entry that I can think to look at is HKLM\Security\ResOver\Bitmap\ and hunt down the dll listed there and see. Also, I'm sure you have soft reset since removing, but I'll throw it out there just in case.
Click to expand...
Click to collapse
Using "MSCEInf" will help you to find what was installed by the cab.
Thanks for the reply's. I did try opening up the cab and checking what registry entries were made, but didn't find any others other than the ones I had already deleted. Unfortunately I already gave up and just opted for a hard reset.
Hmm, Batti doesn't put such a thing here. Are you sure it's not another program doing it, like quickmenu?
kilrah said:
Hmm, Batti doesn't put such a thing here. Are you sure it's not another program doing it, like quickmenu?
Click to expand...
Click to collapse
No wonder I couldn't get rid of the thing. I didn't realize quick menu put that there. I wish I had known that before I did a hard reset and had to reinstall everything. Thanks for letting me know though, I won't install quickmenu again.
xeno1 said:
Thanks for letting me know though, I won't install quickmenu again.
Click to expand...
Click to collapse
You can also just disable that features in quickmenu options

Categories

Resources