hi guys....
i just flash my ROM to SNE v2.0
however after i do that, a program failed to load after i flash it
the program name is Mapking, it is a GPS program that came bundle with my kaiser
however, after i flash my ROM, i reinstall the program, but now when i try to open the program, it just keep on stuck at the loading page and wont load at all
i reinstall it few times already but it still wont load....anyone can help?
btw, if i would like to use back to original ROM , means that i have to find and download the ROM of my original ROM , and flash it back?
Did you configure it to COM4 and rate of 9600?
no...the problem is not i the gps failed
is the whole gps program fail to load at all!!
samlee860407 said:
no...the problem is not i the gps failed
is the whole gps program fail to load at all!!
Click to expand...
Click to collapse
What "gps program" failed to load? What error? What happens? etc....
Your description is very vague in both posts.
ok....the name of the gps program that i use is mapking
after i flash my ROM to SNE, i install back Mapking
however, after i install back Mapking, when i try to open the program, it just keep on stuck at the loading screen, and just wont load in
Related
Hi all,
I am facing a weired problem,
I have installed an application, it was installed very well, with no problems at all.
But when i flashed it with a new ROM, i have tried to installed that application again, i keep getting:
Installation of 1 ACERT_ARB.CAB was unsuccessful
shortly the whole package doesn't get installed at all.
I went through the program files, deleted any old stuff, tried to reinstall, but the same problem
i have put the old ROM back, but still no luck
am i missing something here? any advises please?
regards
i get that issue every now and again. I usually have to either use a different file explorer or do a soft reset and try again.
Thanks for sharing
i have found the solution finally
the current ROM doesn't support the CAB file i was installing,
i needed to do the following:
remove the SD card
reinstall the compatible ROM which support the CAB file
i hoop it it heps other they may had the same issue
reinstalled rom...
still problem continue
has a other solution?
I recently had this problem when trying to install a couple of CAB files. It appears that something was running that the CAB was trying to update. So, for example, I was trying to install "Inbox Extender" and POutlook (and/or tmail?) was running. Once I killed that, I could install the CAB.
CAB won't install suggestion
I saw this with several cabs that I ran using Resco Explorer and I had Kaiser Tweaks set to not delete the cab after install. The solution was to deselect that setting in Kaiser Tweak, ket a fresh (never run) copy of the cab file and run it using the generic file explorer. It has worked every time since then.
Acert_Arb.cab is no more working
NightStar404 said:
Hi all,
I am facing a weired problem,
I have installed an application, it was installed very well, with no problems at all.
But when i flashed it with a new ROM, i have tried to installed that application again, i keep getting:
Installation of 1 ACERT_ARB.CAB was unsuccessful
shortly the whole package doesn't get installed at all.
I went through the program files, deleted any old stuff, tried to reinstall, but the same problem
i have put the old ROM back, but still no luck
am i missing something here? any advises please?
regards
Click to expand...
Click to collapse
hello buddy,
Microsoft has made ACERT_ARB.CAB for limited time I think so. Now Microsoft has decided to claim $ for their OS windows mobile. They are working with www.penreader.com
ACERT_ARB.CAB is no more working.
visit this for more information:
http://social.microsoft.com/forums/.../thread/fa78dad9-7ede-472a-af0b-1f8dddaf7900/
http://www.penreader.com/pocket-pc/arabic/Language_Extender_Arabic.html
I cant install anything, .exe, cab, nothing. Please help!!!
I also can't install and run any .cab , .exe or haret. help us
Hi,
I tried to install garmin but i receive this error;
Error: Assert failed at gfx_buf.cpp : 152 in Garmin Mobile XT with error 0.
Does someone know a solution for this problem?
Plug ur htc to PC then install Garmin xt from PC. Hope this help
I've gotten weird errors like that and it seemed to be related to having it set to GPS Intermediate Driver instead of COM4.
For me, I was able to quickly go through the menus and change it to COM4, then it wouldn't crash.
jeffreybr said:
Hi,
I tried to install garmin but i receive this error;
Error: Assert failed at gfx_buf.cpp : 152 in Garmin Mobile XT with error 0.
Does someone know a solution for this problem?
Click to expand...
Click to collapse
Delete any text message on your phone and see if that fixes it. I know it sounds totally unrelated, but this sounds like the error I used to get, and the solution was to delete your text messages.
I was getting errors with Garmin XT after I used the GPS tweak cab that is going around that addresses the GPS "lag". I changed/deleted the keys in the registry that the cab changed/added back to the factory default and I have no crashes/errors.
Sorry to resurrect this old thread but I'm having the same problem - I haven't installed any GPS fixer utilities and deleting my text messages is something that I'd rather avoid. Any other ideas? I can't even get into the application to change anything before it crashes.
Which version of Garmin did u install? And from which site?
Or just try to re-install the appliaction
hi guys,
thought i would clean up my system by reinstalling windows this wkend...
been using windows7 + jerpelea with no issues thus far...
but after format/clean install i'm getting an error when building my rom under jerpelea's x1 kitchen
happens after BuildOS / and looking at the batch file its caused by G'reloc
any ideas?? as i need to get this working again
(i did play with bios settings on my motherboard but even when changing them back and reinstalling same error msg)
Launching BuildOS:
After selecting packages and running program
exit the program to contine
Do not close this window!!
Relocating Modules, please wait...
The application has failed to start because its side-by-side configuration is in
correct. Please see the application event log or use the command-line sxstrace.exe tool for more detail.
ERROR! (errorlevel: 14001)
Press any key to continue . . .
ryousuke said:
hi guys,
thought i would clean up my system by reinstalling windows this wkend...
been using windows7 + jerpelea with no issues thus far...
but after format/clean install i'm getting an error when building my rom under jerpelea's x1 kitchen
happens after BuildOS / and looking at the batch file its caused by G'reloc
any ideas?? as i need to get this working again
(i did play with bios settings on my motherboard but even when changing them back and reinstalling same error msg)
Launching BuildOS:
After selecting packages and running program
exit the program to contine
Do not close this window!!
Relocating Modules, please wait...
The application has failed to start because its side-by-side configuration is in
correct. Please see the application event log or use the command-line sxstrace.exe tool for more detail.
ERROR! (errorlevel: 14001)
Press any key to continue . . .
Click to expand...
Click to collapse
Did you try to download the kitchen again ? and tryed it with new downloads maybe something got wrong with your tools.
i never had this issue
Yeah i downloaded it again as i thought there was an issue when i copied files to and from my backup drive (maybe the hidden files didnt get copied)...
same issue...
Hi
I posted this in another board but didn't get an answer so I'll try again here (with more details).
I've tried to install TT5 on my Himilaya with esfane's German version WM6.5. After finally finding threads from people with the same problem I tried the solutions there but with no luck. What I've tried so far:
If I try to install the app using the .cab file it gets all the way to the end but then says installtion failed. I still get the today plug-in but it only beeps at me. The Navigator folder is empty.
I extracted the .cab on my PC, renamed the files according to the .ini and copied them to the folder on my PPC - no luck. The .exe just gives an error messge "failed to start". I'm assuming all of the registry entries are missing.
That brings me to the end of what I can do. I know the .cab install works with WM6.1, which is the solution in the wiki but it doesn't work on my device.
I don't want to upgrade because that means buying the software again.
HELP!!!!
Thanks in advance.
Hello Every Body.
After a bad Manipulation, QuickGPS doenst want start.
she said me: "the file QuickGPS" cannot be opened. either it is not signed with a trusted certificate, or one of its components cannot be found. if the problem persists, try reinstalling or restoring this file."
Anybody can post a Cab of gpsrapid for my touch pro please?
Because all of gpsrapid i found on the internet has the same problem.
PLEASE....
Try making a new shortcut to quick gps-you may have messed up the original one. Or, check if you've over-written any rom files related to quick gps with something that has the same name but a different function.
I try to execute them directly on the windows folder but not successfuly
I install tp2x rom...
i ask to the developer so
thanks
This is the error message in english
"the file QuickGPS" cannot be opened. either it is not signed with a trusted certificate, or one of its components cannot be found. if the problem persists, try reinstalling or restoring this file."
You get that error when you have a bad shortcut or when there are missing (or over-written) modules. If it happened right after the flash, then there's a problem with the rom.
No
after a flash, quickgps is ok.
but after the flash, i made a update of quickgps with a cab found on xda...
i restart, and i execute directly /windows/quickgps.exe
and my phone said the error message
Well, it's pretty obvious that you over-wrotr the stock modules with new ones that don't work. Remove them w/ sk tools or total commander, or just do a hard reset and start over. Why would you want a new quick gps, anyway?
i made that because i have a problem with gps since the start...