Related
Hi BA people,
I've spoken with my friend that has a Hymalaya (QTEK 2020) device, and he was joking me about all the trouble I have with the BA. It has a perfect bluetooth device that works with a lot of headset without noise, WM2005 already installed and working, very rare softresets, and spend less money than me. Amazing thing, I don't use wifi and so...
Franky, it seems to me that this device is a fake.
No people is working anymore on bluetooth that is dead by month and month, stopped at BT3900 and after 6 month I'm still unable to use my motorola HS801 headset that is lying in a corner with a lot of dust.
I was wrong when I buy this QTEK 9090, the older model was better. I think that I will not make the same error another time. Bye Bye HTC.
Sorry to hear that
I'm sorry to hear that you are not satisfied with BA. I'll admit that it has some bugs, but I'm happy since I use WiFi far more than Bluetooth. I almost bought a Treo 650 or Xda Mini, but WiFi was the deciding factor for me.
Hope they fix the Bluetooth problems with headsets though. I had a Nokia headset from my old phone and I couldn't use it with my IIs. At least sharing files through Bluetooth isn't a problem anymore.
contrary to the first poster..
i actually bought this phone knowing its problems...
Solving the problems one by one through the forums is one of the fun things that an xda2s / BA owner can do..
Everyday , I am discovering something new about the BA device.
I guess if I wanted a regular phone that already worked as it should...
I'd have sticked with my Nokia 6600.
Now I have a BA device which has inherrent problems, which forces me to read up the forums here and get really technical about the phone..
This actually made me love the phone more...
Hey guys,
It's so strange...
I know a lot of people aren't satisfied with the Phone or BT on a BA.
I have an SX-66, two weeks now, and it's working so well.
I can pair up with my BT GPS device 100% of the time, with NO problems at all. No need to repair when I turn off unit, etc. etc.
I used to have lots of problems with my HP.
The SX-66 is great.
Also, in terms of a phone, I am also truly happy with it.
I am in my basement and get 40% or 20% signal strength, and I can actually talk on it.
With my old cell phones T-616, Motorolla 720,... no way they would work in the basement.
Very strange how people have so many problems...
This device is 100% great in my books.. (and I am very very fussy!)
Also, since I installed MS Voice Command 1.5... WOW... it is easier to use than any Cell phone i had in my life!
M
I agree with the first poster - I too have a Motorola HS801 which I can't get working properly on my O2 XDA IIs. Highly annoying, but I don't want to risk buying another BT headset in case it doesn't work either!
I have had mine for almost a year now and I have had great success with it! It does have it's issues,but at least we are able to "fix" them ourselves. I use both the b/t and the wifi on a daily basis without any real problems.Btw,I use a motorola hs820 and it works very well for me.I have very few if any resets with the new radio.If I have any complaints about it,it would be with the Truefax.
simopimo said:
I agree with the first poster - I too have a Motorola HS801 which I can't get working properly on my O2 XDA IIs. Highly annoying, but I don't want to risk buying another BT headset in case it doesn't work either!
Click to expand...
Click to collapse
I have been using a Sony Ericsson Akono 660 Bluetooth with the pda2k BT3900 radio 1.12 and firmware of 1.40 for the last 2 months and I have paired it once. It works really well. I have a coverage of about 10 feet from the pda2k in line of sight and about 4 to 5 feet if the pda2k is in the car and I am outside etc.
For those of you who are not aware of which BT headset to use. I had compiled a thread on www.clubimate.com sometime back which lists those headset (reported by users) which seemed to work and do the basics, ring when call comes in, answer or hang up the call etc.
I would suggest they you review this list before making a decision on buying any BT headset. I also believe that iMate has released a list of officially tested BT headsets known to work with pda2k etc.
good luck
I was considering the Jabra BT800 because their web site states that it's supported with the XDA IIs, but after seeing some comments from others in these forums, it's so hard to work out what to go for.
therock112, I'm sure we're all looking forward to seeing that list!
I have tried the various ROMs with my PDA2K and the BT headset (tried HS810 and 820) are so inconsistent. The BT headset is a great idea but poor with this PPC. I wonder if the Samsung i730 is my next hope.
also disapointed
yes guys to my regert i have to admit that the ba is quite a failer in all the meaning
whaen you pay for device around 700 us$ u expect a little more then we get
the bt the wifi and the problem that seem far far away to be solve so what the solution is just to show our finger up againt ba product what ever
the name is and if the manfacture and microsoft will not improve we shuld decide and if somebody want to have fun by solving problem each day he can use a simple math book!!!!!!
Hi albnigxda!!!!
Do not get nervous....I hv used PPCs since 1997, all that HP and compaq stuff,XDAI/II/IIi/mini/HP6365/ and now BA(PDA2K)
and I can assure that BA is the best....
I use SE HBH 65....no problems
Couple of times use Wi Fi at some malls and cafe shops...Just wonderful with battery and speed.
My BA has become more stable after installing latest O2 ROM and choosing the particular band frequency(1800 MHz in my case) and no bad signal problems...
Use lot lot of applications with 512 MB SD card....
With all the above and 120 calls per day on avrg with 1 hr of GPRS usage My battery lasts for 26-30 hrs(Of course, during day time I keep OFF the backlight, as I use MS voice command and it tells who is calling)
So keep.up and go ahead...u hv the Best Handset of the World....
I can tell u as I hv also used Sony Ericson p8xx/9xx Almost all Nokia symbian phones to the latest 6681.....and I can tell u none can match the preformance of BA...
I hope, this will encourage you.
Good Luck
Have pda 2k latest rom off imate site have gotten 40 feet line of site , out of site is not so good. us a jabra bt800 am on it all day i have more problems with blue tooth on my laptop then my phone have had 3 other ppcs before this one its the best by far.
aladin2000 said:
Hi,
do you tried also a buttom to call with voice command application or a phone call ?
I've a HTC S100 and the sound is well but it's very difficult to start a voice commande or to recall last call because seem that the function "hand free" sometime is lose.
Sorry for my poor English !
Regards
aladino
Click to expand...
Click to collapse
I have the same problem with my handsfree headsets an Tytn II (kaiser):
i have a motorola H700 and a Scalarider headset for helmets.
They are bot NON-ADP and thyey support handsfree.
Sometimes the button on them stop working and I can't do voice dialing with Voice command neither repeat last call.
They appear as connected and If I manually call a number they work.
To get the button works again I have to restart the phone.
Maybe a fault in the microsoft bluetooth stack?
Also: my Motorola H700 has a flip and when you open it the headset turn on and get connected.
You should be able to answer phone calls by opening the flip.
Sometimes it works, but most of the time it doesn't connect if I open it while the phone is ringing and in that case I have to restart bluetooth connection to make it work again.
Microsoft or HTC should check end improve bluetooth stack!
Any hack around?
Can't we put the broadcom instead of microsoft stack on kaiser?
I wrote to HTC Support about this problem and they answered :
"Customer email address:XXXXXXXXXX
Good Afternoon,
The multi function button is the one small button with the led light in, not the big play/pause button.
If you try the other button, it should work.
Thank you for your enquiry, Should you have any other problem, please do not hesitate to call us. Your Local number can be found at http://www.europe.htc.com/support/csbyphone.html
Best regards,
XXXXX
HTC Europe
[email protected]
http://www.htc.com "
That's incredible don't you ?
They beleive I'm idiot ?
Regards
aladino
Astonished!
Amazing answer!
Are they idiot?
I'll write them too,
I hope someone cleverer will read the my mail
and suggest the bug to the technical stuff.
I have a motorola H350 and have been experiencing the same problems. It's driving me mad. The problem makes the use of the hands free totally useless as it seems to stop working at the drop of a hat.
What I've found so far.
To get it working you need to turn on the ear piece.
Then turn on the bluetooth on the phone.
If you do this any other way it doesn't work. Once it's working you may or may not be able to hang up with the button. If that's the case it won't answer with the button either.
Once it's working it seems to work ok till either the headset or the phone's bluetooth is turned off.
Voice dial will not fire up until the main procedure if followed and sometimes it takes several tries.
I was wondering if this was something to do with the motorola but seemingly it's to do with the stack so getting another device isn't going to help I guess.
The bluetooth worked perfectly on the Hermes but immediately I got the Kaiser one thing alerted me to the fact that something was different.
With the Hermes, as soon as I turned on the bluetooth and the earpiece the phone would alert me to the fact that the motorola wanted to connect.
With the Kaiser nothing, even when I searched for a device. I had to find out how to put the earpiece into search mode before it would find it.
Very flakey and very disappointing. I hope someone finds a fix for this.
Anyone else experiencing these problems?
I've got an H700 and Jawbone. I do notice more crackle type sounds and lower volume on both using Kaiser compared to my 8525. The H700 connects within 1-2 seconds when opening it's flip and I have noticed that on occasion, if I walk away from the phone (eg. phone on desk) the headset may not reconnect when I return. The Jawbone has been fairly good at connecting and staying functional at all times but the volume is lower as noted by many people.
I would say that the stack overall is better than the 8525's for all the devices I've tried (3 headsets, 2 Laptops, 1 Garmin Streetpilot with BT Phone interface)
I am also losing the Voice speed dial & redial button from time to time. It also worked that way with my hermes, so I kinda get used to it...
I am now wondering if it is related to my BT earpiece (nokia bh-200 or something like this) of if it is the BT stack which has never been really working on all the device I could test (hermes, trinity, kaiser).
I allmost never had issue recieving call (I don't recieve much call while using the BT earpiece) but it is sometime impossible to initiate a call through the BT earpiece.
The simplest way for me to lose the voice recognition is to:
-Start BT on the phone
-Start BT earpiece
Phone recognize the earpiece, everything is fine
-Restart the phone
Phone & BT reconnect, but voice recognition & redial are gone
I would really appreciate of some of you could test my little procedure and report if it works of not. If it is working for some other BT earpiece I may change mine and get rid of this eternal annoying issue.
Thanks
Jabra BT500
I have the Jabra BT500 and same problem with the TyTn II.
The earpiece can't initiate a voice call...
Looks like HTC (or Windows), starts to deliver ROMs like Mr. Bill Gates does with his M$ crap...
If someone find a solution for this Bluetooth problem, please post it!!!!
Thanks a lot,
Kaiser and Moto H700 just do not work together
I also have a problem with the Kaiser and a Moto H700. The M700 button stops working randomly, the BT connection sometimes disconnect during the call at will.
I can still use H700 successfully with my old Nokia 6680, so the problem clearly is in the Kaisers BT stack.
I’ve made the BT update that HTC posted just recently for TyTN II, but it had no effect.
Fortunately, I have my old Moto H500. This one is working OK with the Kaiser, but. Like it was pointed here before me, the only way to get it working you need to turn on the ear piece. Then turn on the Bluetooth on the phone.
In case if the Bluetooth connection was disrupted for some reason, the only way to make it work is again swath Kaiser BT off then turn on the ear piece and switch on the TyTNs BT.
The Kaiser’s BT stack is not good also connecting with a PC, the connection is just not stable.
Just wanted to chime in and say I've had the exact same problems with my Tilt and Motorola H700 as various people have described here. I posted about it on the AT&T forum too, and no one there has any working solution either, AFAIK. I too tried the "fix" from HTC, and to no avail.
This is a pretty big disappointment for me; I love my Tilt, but Bluetooth is not new technology, and it's really inconvenient that it works so poorly on this phone.
Motorola headsets seem to have a problem with this device. I had trouble getting my H500 to connect and the voice button to work. Once I reset the phone when the headset was on and it wouldn't connect. I tried deleting and re-pairing. It took another reset to get it back. Fortunately I don't use that headset anymore.
jameselee said:
Just wanted to chime in and say I've had the exact same problems with my Tilt and Motorola H700 as various people have described here. I posted about it on the AT&T forum too, and no one there has any working solution either, AFAIK. I too tried the "fix" from HTC, and to no avail.
This is a pretty big disappointment for me; I love my Tilt, but Bluetooth is not new technology, and it's really inconvenient that it works so poorly on this phone.
Click to expand...
Click to collapse
The same problem.
But this time with the Sony Ericsson BT HBH - DS980.
I also put the "fix" from HTC, I gave them back and they change them with another brand new Sony Ericsson BT HBH - DS980, but the problem exists.
costas2by4AIO said:
The same problem.
But this time with the Sony Ericsson BT HBH - DS980.
I also put the "fix" from HTC, I gave them back and they change them with another brand new Sony Ericsson BT HBH - DS980, but the problem exists.
Click to expand...
Click to collapse
I just bought the same headset... cant get it work with the TyTN II - Kaiser but pairs without any problem with my TyTN I - Hermes... clearly it is the BT Stack
Way beyond my abilities, but cant the BT stack on Hermes be cooked into a rom for the Kaiser ?
I have a Motorola HT820 and a Motorola S9 both devices are working flawless with the kaiser.
Now i own a motorola S705 too , with this device my kaiser suddenly turn the bluetooth off (
regards
Apparently there is a known issue with the Microsoft bluetooth stack which makes it virtually useless to use this phone with Infiniti/Nissan vehicles.
I own a G37, and when I connect the Tilt, everything connects but the quality is sooooo poor that it sounds as if I have the phone in the house and the car is 100 ft away (crackling sound, and no one on the other end can hear me).
I have tried several of the roms here, including the official ones, and no luck thus far. I have tried playing around with the bitpool settings and once again no luck.
Anyone have any suggestions? Is there any way of replacing the Microsoft stack implementation from the Kaiser with the one from the Hermes? That one works perfectly with my car...
Have you tried Austinsync's clean rom? Its working fine with my M45 and I had the same problem you did with some other ROMs. Not sure if ROM change fixed it or one of the other hundred changes I make to my phone every other day. I assume you have adjusted the volume while in-call?
sell your car and buy American!
kireol said:
sell your car and buy American!
Click to expand...
Click to collapse
Your phone is made by a Taiwanese manufacturer. I tried searching for a American-made cellphone so that you could immediately begin your purchasing prospects, but was stunned to find that there is not one American cellphone manufacturer.
Your profile picture looks somewhat like a Dodge Ram to me. You might be interested to know that Chrysler recently built a new $315M Dodge plant in Brazil. They also worked collaboratively with Mitsubishi and Hyundai to design 3 engines that will be manufactured mostly in South Korea and Japan.
But let me get back to the topic at hand. I own a 2007 G35S Sedan and I have had very minimal trouble with my Tilt and the handsfree system. Everything works fine, including the reception meter (never worked on my 8525, even with WM6 ROMs). The only problem that I have noticed is that if I answer an incoming call using the button on the steering wheel, the car appears to start the call, though the audio is routed through the phone for the first 10 seconds and then the car resumes control. It is worth noting that I couldn't get my 8525 (WM6) to work with the car at all - even with the latest and greatest.
I will borrow my dad's Kaiser (as mine was returned earlier today), and try the Austinsnyc's superstorage rom. Hope it works, although I think it's based on the base HTC rom. As I'm sure they're using the same Bluetooth stack, problem should be the same.
Either way, I'll try and report if it works.
As far as the buying American... I thought that whole marketing scheme went out the window a few years ago when Chrysler merged with Mercedes Benz, and most of our products are made in China (as our workers are not willing to work so cheap without going on strike)... don't you just love the beauty of the world economy?
klasikahl said:
Your phone is made by a Taiwanese manufacturer. I tried searching for a American-made cellphone so that you could immediately begin your purchasing prospects, but was stunned to find that there is not one American cellphone manufacturer.
Your profile picture looks somewhat like a Dodge Ram to me. You might be interested to know that Chrysler recently built a new $315M Dodge plant in Brazil. They also worked collaboratively with Mitsubishi and Hyundai to design 3 engines that will be manufactured mostly in South Korea and Japan.
But let me get back to the topic at hand. I own a 2007 G35S Sedan and I have had very minimal trouble with my Tilt and the handsfree system. Everything works fine, including the reception meter (never worked on my 8525, even with WM6 ROMs). The only problem that I have noticed is that if I answer an incoming call using the button on the steering wheel, the car appears to start the call, though the audio is routed through the phone for the first 10 seconds and then the car resumes control. It is worth noting that I couldn't get my 8525 (WM6) to work with the car at all - even with the latest and greatest.
Click to expand...
Click to collapse
It was supposed to be a joke as it has nothing to do with the car. But since you wanted to act all high and mighty......
My Dodge ram was designed approximately 15 miles from my house. It was built 5.5 miles from my house. The company that built it employs approx 200,000+ direct employees and roughly 400,000 indirect, here in the U.S., where i live. At an average salary of $75,000 that's roughly 45,000,000,000 that the company that I buy my car from pumps back into the American economy. This does not include car dealers.
The 2007 G35S is designed in Japan. The 2007 G35S is built in Japan. The 2007 G35S employs maybe 1000 people here in the U.S. because someone has to import it and drive the boat, drive trucks, and do paper work. At an average salary(i'm sure it's way off but lets pretend) of $75,000 that's 75,000,000 that gets pumped back into the American economy. This does not include car dealers.
45,000,000,000 vs 75,000,000
yeah, you are right, it's all even. buy imported cars. it makes sense.
Thats EXACTLY the same problem with my 2007 G35 sedan and my HTC TYTN 2.
When i press the receive button, it takes 10-15 seconds to transfer over to the car audio (goes to the handset first).
THe only solution i have is to receive the call using the phone's talk button, which will go immediately to the car.
I am currently running Dutty's Touchflow Final 2 rom.
BTW. Before my G35, i had a 2006 Chrysler 300C Hemi rollin on 22's with full multimedia setup. My first domestic. I only owned imports before. After i came back to get my infinity G35 (after my major accident), i remember now why imports are so much better than domestci. The Infiniti is built like a ROCK, and the 300 was very crude in build quality.
Anyhow.
klasikahl said:
Your phone is made by a Taiwanese manufacturer. I tried searching for a American-made cellphone so that you could immediately begin your purchasing prospects, but was stunned to find that there is not one American cellphone manufacturer.
Your profile picture looks somewhat like a Dodge Ram to me. You might be interested to know that Chrysler recently built a new $315M Dodge plant in Brazil. They also worked collaboratively with Mitsubishi and Hyundai to design 3 engines that will be manufactured mostly in South Korea and Japan.
But let me get back to the topic at hand. I own a 2007 G35S Sedan and I have had very minimal trouble with my Tilt and the handsfree system. Everything works fine, including the reception meter (never worked on my 8525, even with WM6 ROMs). The only problem that I have noticed is that if I answer an incoming call using the button on the steering wheel, the car appears to start the call, though the audio is routed through the phone for the first 10 seconds and then the car resumes control. It is worth noting that I couldn't get my 8525 (WM6) to work with the car at all - even with the latest and greatest.
Click to expand...
Click to collapse
No problems in my M45...
Maybe it's the car and not the phone?
I had a G35 prior to the Bluetooth option so I cant speak about the quality there but the M45 has been pretty good. the Tilt has a low out put at times but 95% of the time it connects perfectly with zero issues. beats using a headset imo
could be the car, but more than likely it's not... here's why:
I have successfully paired and used 2 tytn, 2 8125 (Wizard), and 1 ol' school SMT5600. All worked fine without any crackling, or the other person on the other end not hearing me...
On the other hand, I have tried 2 Kaisers and both exhibit the exact same things...
(btw, in the info screen about the bluetooth connection the connection shows up as "poor" for the kaisers, excellent for the rest...)
It's hard to believe that I'm the only a-hole that has the Kaiser/Tilt and G37 combo out there... anyone else having the same problem or am I alone on this one?
Did you not read my post? I have a Tytn 2 and a 2007 G35 sedan with the exact same problems as you.. Just use the Talk button on your phone to receive calls..
Arent you on G35drivers.com?
marsb007 said:
could be the car, but more than likely it's not... here's why:
I have successfully paired and used 2 tytn, 2 8125 (Wizard), and 1 ol' school SMT5600. All worked fine without any crackling, or the other person on the other end not hearing me...
On the other hand, I have tried 2 Kaisers and both exhibit the exact same things...
(btw, in the info screen about the bluetooth connection the connection shows up as "poor" for the kaisers, excellent for the rest...)
It's hard to believe that I'm the only a-hole that has the Kaiser/Tilt and G37 combo out there... anyone else having the same problem or am I alone on this one?
Click to expand...
Click to collapse
Tilt + my Mercedes work great.
Same problem w/ Tilt & G35x
Not that I'm glad anyone is having this problem but glad to see it isn't just me. I started with an unlocked imported TyTN (Hermes) phone that worked perfectly in my '07 G35x purchased in May. I never had one problem pairing in the car, receiving or making calls, using voice commands via the car or audio quality.
As soon as I purchased my Tilt I immediately had problems in the G35x but not with any other bluetooth device (I also have a Garmin c550 and pair and make / receive calls with it without any problems).
I can pair the Tilt with the car - no problem. I can use voice commands to make a call - no problem. As soon as the phone starts to ring through the car speakers I can tell there will be a problem because the ring is very 'tinny'. I can hear the person answer and speak but they cannot hear me at all. I then put Dutty's ROM on the phone thinking maybe it was a stack issue that might have been resolved in a new ROM (assuming their had been updates to the BT stack). That did not make any difference.
I will by tomorrow test my corporate Blackberry in the car again. I had used it in the car via bluetooth while I had the Hermes - no problem. I will retest now that the Tilt isn't working.
Have any of you contacted Infiniti and / or AT&T? I could only assume until they have a quantity of calls will they say anything other than "not our problem" or, "never heard of that before".
If there are others with this problem it would be good for them to acknowledge their experience here along with any comparative good/bad feedback with other phones in the same and different car / devices.
Update: I've just tested my Blackberry 8700 that worked prior to pairing the Tilt with the G35. I can confirm that the Blackberry still works flawlessly. As the Tilt also works flawlessly with my Garmin device I think the cause is unclear but would appear to be with the Tilt as it is the only thing that has changed in the tests I've identified above.
Regards,
David
minirx7 said:
Did you not read my post? I have a Tytn 2 and a 2007 G35 sedan with the exact same problems as you.. Just use the Talk button on your phone to receive calls..
Arent you on G35drivers.com?
Click to expand...
Click to collapse
well, one of the ways I use the phone also is calling out... when I dial the number and call from the phone, the car bluetooth connects and the crackling starts... (i call my voicemail to test).
besides being an Infiniti/Nissan issue, it appears it is far more widespread... there's already a 20 page thread on BT and Kaiser! from that thread it appears HTC is aware of the issue and is working on an upgraded stack/rom... everyone cross your fingers and hope that one works!
Could you provide the link to that thread?
Thanks,
David
marsb007 said:
well, one of the ways I use the phone also is
calling out... when I dial the number and call from the phone, the car bluetooth connects and the crackling starts... (i call my voicemail to test).
besides being an Infiniti/Nissan issue, it appears it is far more widespread... there's already a 20 page thread on BT and Kaiser! from that thread it appears HTC is aware of the issue and is working on an upgraded stack/rom... everyone cross your fingers and hope that one works!
Click to expand...
Click to collapse
SteinyD said:
Could you provide the link to that thread?
Thanks,
David
Click to expand...
Click to collapse
here ya go... hope someone finds a fix soon...
http://forum.xda-developers.com/showthread.php?t=329270
Thanks .. I hope HTC truly has acknowledged the issue and is working on it. I sent an email tonight to HTC America and hope to get a favorable response soon.
marsb007 said:
here ya go... hope someone finds a fix soon...
http://forum.xda-developers.com/showthread.php?t=329270
Click to expand...
Click to collapse
Multiple solutions...
I'm using Dutty's TouchFlo Final Rom and I'm not having any problems with my 2006 M. So maybe you can try that ROM.
But on the M, I did have horrible problems with my E-Ten M500+ (continous feedback...C R A Z Y), and limited functionalities with my 3125. Both of those problems were solved instantly with this software: http://www.jetwaremobile.com/ They offer 30 day trial of their software, so try it.
marsb007 said:
well, one of the ways I use the phone also is calling out... when I dial the number and call from the phone, the car bluetooth connects and the crackling starts... (i call my voicemail to test).
besides being an Infiniti/Nissan issue, it appears it is far more widespread... there's already a 20 page thread on BT and Kaiser! from that thread it appears HTC is aware of the issue and is working on an upgraded stack/rom... everyone cross your fingers and hope that one works!
Click to expand...
Click to collapse
I do not have this issue with my g35... I do not get any crackling.. Its only when i try to receive calls, it delays like 10-15 seconds!!!
Making calls is NON-issue...
it really is crazy... I've tried that particular rom and it has the exact same problem. I have also tried the Jetware bluetooth stack, and once again, it does the same thing. I've tried about 5-6 different roms, from super clean roms, bigstorage, to the latest build numbers that I could find, and all do the exact same thing. I've played around with the bitpool settings, audiogateway settings, and nothing...
It may be that the combination of the G37 + Tilt just has something in there that makes it go crazy. Could be the car, but as I've said earlier, all other phones work, including the Hermes, without any problems whatsoever.
Anyone out there with a G37 willing to give the Tilt a try? I'm about to go to the dealer and pair it with other cars to see if it works!
If you have the G37 (coupe I guess?) then you have the 2008, right? I know they switched to the new hard drive based system. So maybe they don't have all the bugs worked out. Top it all off, MS's bluetooth stack is kinda shaky, so it might be amplifying the problem.
I don't see any service bulletins relating to this issue on your car either: http://x.infinitihelp.com/forum/local_links.php?catid=86 I doubt that Voice Recog system update will fix your bluetooth issues...but then it might. Worth a try.
marsb007 said:
it really is crazy... I've tried that particular rom and it has the exact same problem. I have also tried the Jetware bluetooth stack, and once again, it does the same thing. I've tried about 5-6 different roms, from super clean roms, bigstorage, to the latest build numbers that I could find, and all do the exact same thing. I've played around with the bitpool settings, audiogateway settings, and nothing...
It may be that the combination of the G37 + Tilt just has something in there that makes it go crazy. Could be the car, but as I've said earlier, all other phones work, including the Hermes, without any problems whatsoever.
Anyone out there with a G37 willing to give the Tilt a try? I'm about to go to the dealer and pair it with other cars to see if it works!
Click to expand...
Click to collapse
hello. I can hear only the calls (phone) on my ck3100 (bluetooth). I need to hear also the tomtom voice and music. Please somebody help me! thank you very much.
This will help you ...
best wishes
TQM
clkuv said:
hello. I can hear only the calls (phone) on my ck3100 (bluetooth). I need to hear also the tomtom voice and music. Please somebody help me! thank you very much.
Click to expand...
Click to collapse
Hi CLKuv, If that is your only problem you are doing well! There are a lot of people, myself included, that just cannot get the CK3100 (or other Parrots) working with the TyTN II at all. In brief (since I have posted all my troubles elsewhere on this Kaiser forum), when I try to dial someone, it very frequently just issues two-tone bleeps and sometimes shows an icon of a musical note with a line through it. Sometimes there is complete silence when you go to dial. The people on other end get their phone ringing but hear nothing when they pick up, nor do I. Also, when they try to phone me, CK3100 rings but when I try to answer, silence in both directions again! Tried lots of different solutions (Jetware, Parrot Firmware Update, etc.) but no luck. Lobbying Parrot & T-Mobile hard!.
Hi
I've got an CK3400GPS and i must say that i've got no problems al all.
At the moment i've got a MDA vario III but also with other HTC devices the carkit works fine,
I'm gonna test this program so i can see if this is usefull for me.
Thanx
horatiog said:
Hi CLKuv, If that is your only problem you are doing well! There are a lot of people, myself included, that just cannot get the CK3100 (or other Parrots) working with the TyTN II at all. In brief (since I have posted all my troubles elsewhere on this Kaiser forum), when I try to dial someone, it very frequently just issues two-tone bleeps and sometimes shows an icon of a musical note with a line through it. Sometimes there is complete silence when you go to dial. The people on other end get their phone ringing but hear nothing when they pick up, nor do I. Also, when they try to phone me, CK3100 rings but when I try to answer, silence in both directions again! Tried lots of different solutions (Jetware, Parrot Firmware Update, etc.) but no luck. Lobbying Parrot & T-Mobile hard!.
Click to expand...
Click to collapse
I've that musical note, too. I've also had my radio go mute for no reason, which requires a soft reset of the vehicle (quite inconvenient to say the least). I also recently had an issue where the phone would not let me dial. I kept pressing the green phone button near the dpad and the phone just would not go to the dialer screen. Bizarre.
The problem in cases like this is that Parrot sez it's HTC's fault, and HTC sez it's Parrot's fault. And the consumer gets caught in the middle.
You need to put on the latest Parrot firmware for best compatability with Windows Mobile. The issue with the Parrot kids is not the TYTN 2, but Windows Mobile. This has been addressed in the latest firmware of at least the 3200LS Colour...
Hi,
When my phone is connected to my car kit (Opel/Vauxhaul UHP) bluetooth sometimes stops randomly. I can turn bluetooth on again with the commmanager and everything is working again. But it can hapen again after a few minutes.
Does anyone have this problem to or even better a solution?
I allready tried all the different Radio Roms, but this didn't solve my problem.
Well with mine i have some hickus but it just happpends once a while.
Most irritating about Diamond and BT in my opinion is that wa have no equalizing for it. and the sound setup from the begining is horrible.
Asked here if anyone has a solution before but none replied.
But as far 2 your problem no. And i use a Pioneer system in my car.
Mauser.NET said:
Hi,
When my phone is connected to my car kit (Opel/Vauxhaul UHP) bluetooth sometimes stops randomly. I can turn bluetooth on again with the commmanager and everything is working again. But it can hapen again after a few minutes.
Does anyone have this problem to or even better a solution?
I allready tried all the different Radio Roms, but this didn't solve my problem.
Click to expand...
Click to collapse
HI
Same was happend with me (Opel), when my battery is low.
orsiga said:
HI
Same was happend with me (Opel), when my battery is low.
Click to expand...
Click to collapse
Mine is not low on battery, but I shall try it once connected to the cigarette lighter.
Nobody else has this kind of problems??
Mauser.NET said:
Mine is not low on battery, but I shall try it once connected to the cigarette lighter.
Nobody else has this kind of problems??
Click to expand...
Click to collapse
I've a JVC head and my bluetooth has no problem.
I have a Honda Accord with handsfree built in and I too am having problems. The phone and car both agree that a connection has been made but when i use it to either ring out or receive a call the radio mutes and when receiving the ringing tone sounds over the car speakers but I can`t hear the caller except on the phone which isn`t very useful. Would a ROM or radio upgrade help or is it just a compatibility problem
davemazo said:
I have a Honda Accord with handsfree built in and I too am having problems. The phone and car both agree that a connection has been made but when i use it to either ring out or receive a call the radio mutes and when receiving the ringing tone sounds over the car speakers but I can`t hear the caller except on the phone which isn`t very useful. Would a ROM or radio upgrade help or is it just a compatibility problem
Click to expand...
Click to collapse
I had this kind of problems also. Also syncing the phonebook gave me problems. You could try JETware, this solved almost all my problems, except now the bluetooth crashes
Mauser.NET said:
I had this kind of problems also. Also syncing the phonebook gave me problems. You could try JETware, this solved almost all my problems, except now the bluetooth crashes
Click to expand...
Click to collapse
Thanks Mauser. I tried Jetware as you suggest and I`m afraid it didn`t help in fact I think it crashed the handsfree system in the car like you. This is the final nail in the coffin for my Diamond. I just can`t get used to it so it`s off to Ebay with it.
davemazo said:
Thanks Mauser. I tried Jetware as you suggest and I`m afraid it didn`t help in fact I think it crashed the handsfree system in the car like you. This is the final nail in the coffin for my Diamond. I just can`t get used to it so it`s off to Ebay with it.
Click to expand...
Click to collapse
I'm sorry to hear that
I am very pleased with my Diamond... I would sooner put my car on eBay than my Diamond
Did you try to check almost everything on in the advanced settings of Jetware? I have also limited the phonebook sync to max 5 entries to debug and on the site of Jetware there wat a fix for Opel car kits.
Keeping my fingers crossed, but until now I haven't experienced any bluetooth crashes.
Mauser.NET said:
I'm sorry to hear that
I am very pleased with my Diamond... I would sooner put my car on eBay than my Diamond
Did you try to check almost everything on in the advanced settings of Jetware? I have also limited the phonebook sync to max 5 entries to debug and on the site of Jetware there wat a fix for Opel car kits.
Keeping my fingers crossed, but until now I haven't experienced any bluetooth crashes.
Click to expand...
Click to collapse
Thanks again Mauser. I tried various settings but without any success, I think the phone is just not compatible with the Honda. Having said that I don`t have much luck with bluetooth at all on the phone. More often than not It just won`t detect other bluetooth devices and when it does it won`t send or receive files so it`s time for it to go and I can go back to a trusty Nokia
Problems here with BT connection to car kit, too. I'm using the built-in car-kit of an Audi A4 (standard one not that with navigation, remote SIM, etc). I've noticed the following issues:
- when I try to make a call, the CD is cut off but NOTHING is heard in the car speakers UNTIL the other party answers the call (and then I start the conversation). No ringing tone, no nothing. I cannot hear the busy tone, or network failure/congestion tone and this is annoying since I have to keep an eye on the phone to see what's happening. I found myself checking the phone when, after calling someone, nothing happened and in fact I got a busy tone and the call ended.
- sometimes, when I receive a call, the CD stops playing but when I answer nothing is heard from the car speakers but only from the phone (as davemazo said also).
- when I receive a call, I hear in the car speakers a "standard" calling tone, not the ringtone I have assigned for that contact
I have to mention that with any Nokia I had before (and still have one as a second phone), these problems do not exist. I know there is a compatibility between Audi factory installed car-kits and Nokia, but BT is a standard and most of the functions should be supported despite the phone model/type. I've tried also with an iPhone and it's working great, as my Nokia do. I don't understand why it is like this with the Diamond. In fact, I think it is not related to Diamond itself...it's doing like this with ANY Windows Mobile device I've tried in the past (Orange C600, Samsung I600).
Are there any solutions for this? A CAB, a new BT radio, a software, anything?... I don't want to buy a new BT car-kit and try with different models until I find something compatible
Thank you for any info/tip
Rapier said:
Problems here with BT connection to car kit, too. I'm using the built-in car-kit of an Audi A4 (standard one not that with navigation, remote SIM, etc). I've noticed the following issues:
- when I try to make a call, the CD is cut off but NOTHING is heard in the car speakers UNTIL the other party answers the call (and then I start the conversation). No ringing tone, no nothing. I cannot hear the busy tone, or network failure/congestion tone and this is annoying since I have to keep an eye on the phone to see what's happening. I found myself checking the phone when, after calling someone, nothing happened and in fact I got a busy tone and the call ended.
- sometimes, when I receive a call, the CD stops playing but when I answer nothing is heard from the car speakers but only from the phone (as davemazo said also).
- when I receive a call, I hear in the car speakers a "standard" calling tone, not the ringtone I have assigned for that contact
I have to mention that with any Nokia I had before (and still have one as a second phone), these problems do not exist. I know there is a compatibility between Audi factory installed car-kits and Nokia, but BT is a standard and most of the functions should be supported despite the phone model/type. I've tried also with an iPhone and it's working great, as my Nokia do. I don't understand why it is like this with the Diamond. In fact, I think it is not related to Diamond itself...it's doing like this with ANY Windows Mobile device I've tried in the past (Orange C600, Samsung I600).
Are there any solutions for this? A CAB, a new BT radio, a software, anything?... I don't want to buy a new BT car-kit and try with different models until I find something compatible
Thank you for any info/tip
Click to expand...
Click to collapse
Hi Rapier,
I also had a SPV C500, MDA Compact, Qtek 8500, Samsung I600, HTC Touch Dual and now the Diamond. The only one which gave me no troubles was the SPV C500, but I think that was because this phone didn't support phonebook synchronization and had no network identification/signal strength over bluetooth.
After the SPV C500 it went wrong. First I noticed that after a hard reset it worked for a few days. Later (about 2 years later ) I found out that it was because the call history was going to long to sync over bluetooth.
Then I found Jetware in which you can limit syncing to any number of items. They even had a fix for the connection to my carkit.
Unit now... it works like a charm... but keep my fingers crossed
I don't know if your carkit is a Audi UHV, but I saw that they had a fix for that too! You have to just install Jetware and then run the fix-file from your phone. Good luck!!
P.S. I am in no kind related to Jetware, I just found out that it worked for me.
Yes, I have an Audi UHV 6634. Thank you for the info, I'll try that and post the results here. Though, my car-kit is not the advanced one and I don't have to sync anything with it (contacts or something else). It's most working as a plain hands-free device, no extra functions...speaking of which, I've noticed that on the phone is detected as "hands-free"...why not "car-kit" as I know a car-kit has other functionality as well? This is the "standard" BT device for any audio enhancements (even if it is a car-kit not a BT headset), or I have to activate something to be recognized as car-kit?
Mauser.NET said:
Jetware? I have also limited the phonebook sync to max 5 entries to debug
Click to expand...
Click to collapse
my Honda system doesn`t read the sim I can only dial out via handsfree using contacts i`ve entered into the Honda system otherwise I either have to read the number to the system and it will ring out (most of the time anyway) or make the call on the phone (illegally obviously) cancel the call and then say "redial" and the system makes the call. So uless I`m misunderstanding this setting I don`t think it will help me.
I`ve searched the Jetware website and I couldn`t find a fix for my Honda
UPDATE: So...I've downloaded it, install it on my Diamond (including the extension file for Audi UHV) and...no change. Everything as before with both issues. Disappointed, I've uninstalled Jetware then...surprise. AFTER uninstall, I can now hear through my car's speakers the ID ringtone Maybe some BT settings were altered and remained like this after uninstall, but I don't know why it didn't work when Jetware WAS installed...strange.
Anyway, many thanks...at least half of the problems are now solved and this only by install/uninstall a program...that's cool. I must now find a way to make the car kit ring when I make a call, this is still an issue.
P.S. I've seen that Diamond support Headset and Handsfree profiles...and when connected to my car kit is set as Handsfree. I suppose this is better than Headset...but still no ring out tone.
Rapier said:
UPDATE: So...I've downloaded it, install it on my Diamond (including the extension file for Audi UHV) and...no change. Everything as before with both issues. Disappointed, I've uninstalled Jetware then...surprise. AFTER uninstall, I can now hear through my car's speakers the ID ringtone Maybe some BT settings were altered and remained like this after uninstall, but I don't know why it didn't work when Jetware WAS installed...strange.
Anyway, many thanks...at least half of the problems are now solved and this only by install/uninstall a program...that's cool. I must now find a way to make the car kit ring when I make a call, this is still an issue.
P.S. I've seen that Diamond support Headset and Handsfree profiles...and when connected to my car kit is set as Handsfree. I suppose this is better than Headset...but still no ring out tone.
Click to expand...
Click to collapse
No thanx! I'm glad I could help
Mauser.NET said:
Hi Rapier,
I also had a SPV C500, MDA Compact, Qtek 8500, Samsung I600, HTC Touch Dual and now the Diamond. The only one which gave me no troubles was the SPV C500, but I think that was because this phone didn't support phonebook synchronization and had no network identification/signal strength over bluetooth.
After the SPV C500 it went wrong. First I noticed that after a hard reset it worked for a few days. Later (about 2 years later ) I found out that it was because the call history was going to long to sync over bluetooth.
Then I found Jetware in which you can limit syncing to any number of items. They even had a fix for the connection to my carkit.
Unit now... it works like a charm... but keep my fingers crossed
I don't know if your carkit is a Audi UHV, but I saw that they had a fix for that too! You have to just install Jetware and then run the fix-file from your phone. Good luck!!
P.S. I am in no kind related to Jetware, I just found out that it worked for me.
Click to expand...
Click to collapse
Hello,
I have a Mercedes car kit and facing the same issue as you: everything works perfectly for a few days when hard-resetting my device, even with my 500+ contacts (they are loaded in less than a minute), but after a few days/weeks I can't get to have my call history or contacts displayed in less than half an hour!
Yesterday I thought I'd just hard reset my device because I had this problem again, but unfortunately it didn't work!
Guess what I have done differently this time: yes, I backed up and restored my call history, which I hadn't done the previous times! So I guess it is indeed related to the call history, but I can't test for now!
I have installed JetWare and limited the call history to 5 numbers, I'll try this tonight and I'll keep you informed...
Hello,
So I have tested this yesterday (installed Jetware and limited the call history to 5 numbers), and now it works FLAWLESSLY! I can browse through my 500 contacts instantaneously when I pair my phone with my Mercedes car kit.
So, in my case it was also clearly the CALL HISTORY that was causing problems... A BIG BIG thanks to Mauser for pointing out this!
I'm also having problem connecting my Diamond to my Volvo S80. All the other functions work except that I could not hear the other party through my car stereo and I also could not diconnect the call with my car end key.
I'll try the Jetware and I'll report back later. Thanks for the pointer.
turt said:
A BIG BIG thanks to Mauser for pointing out this!
Click to expand...
Click to collapse
No thanx! ... glad I could help