I have brought to life an old 2i and decided to set everything up.
however i cannot seem to get the internet (MSN) to work on o2 payg, i think its because i cant get msn to connect via my work connections as my isp doesnt have any settings for gateway proxy. is there any workaround for this?
Related
Hello all. I have successfully installed BB Connect 4.0.84 on my Kaiser and it is up and running...both my BES and BIS accounts. Fairly smooth.
Question - whenever I suff the Internet or update my RSS feeds with Insight, it kicks the BB Connect "off" (disconnects) and uses MediaNet. Then I have to go in and "force" BB Connect back on. A bit of a PITA. I have an unlimited BES plan from AT&T...do I need to set the Connection types to be something else now for these other programs that need to access the Internet?
Any help you could provide with you greatly appreciated.
Thanks!,
Adam
yes go into the connection settings. then go to advanced and select networks and set both to My Isp or which ever one your BES\BIS connects to.
There is a new one now (not just MediaNet) tha is called "My Blackberry" but when I select that one none of the other Apps connect to the internet. Once when I select MediaNet do they connect. They actualyl disconnect the BBerry,connect themselves, and then a bit later the BBerry appears to re-connect on its own....so this may work out to be ok.
Thanks - much appreciated.
welp sorry to say bud thats how that is going to work then... BES must use its own network settings and the MediaNet for internet uses another sorry your stuck unless entering in the settings for wap.cingular by hand and not using MediaNet work for BBC
I too have BB Connect installed on my Kaiser. I am able to get emails successfully over Blackberry and gmail. However, I cannot use Internet explorer over MediaNet. GoogleMaps, the weather plugin, QuickGPS, etc can all get the data they need when connected through MediaNET but IE will not load any webpages.
Any thoughts on how to fix this? There are no options to config connections within IE and the connection within settings seems to be correct (how else would the other applications be able to use MediaNET?).
Note:
I can launch BIS for internet explorer and use the Blackberry connection instead of MediaNET. Obviously though this is not optimal as BIS has lmited sites, low res pictures, etc.
This is not really in the right forum. THere are a couple of BBC threads in the other Kaiser forum that address your question directly. Go there and search for blackberry. You'll find them.
issue kaiser w/ bbconnect
Hello,
I have a kaiser and the bbconnect installed on it but when I want to activate it, all my today plugins disappear and I can't find them in the today setup anymore.
Does anyone have an idea?
I'm in France but I don't think the issue comes from that.
I need it for my job and at the moment i'm totally held so please help me if you can.
Thanks in advance
I am having some issues with setting my proxy settings on my Tilt. The HTTP proxy is wiped out once they are set.
Here is what I am doing to create the problem
I go to Start ->Settings ->Connection Tab ->Connections ->Advance Tab ->Select Networks and change both settings in this menu to use "My Work Network" for both settings, and then set the proxy settings for "My Work Network" to use my corporate proxy, everything works fine until I enable a WLAN connection. After I enable the connection the proxy information disappears.
I guess I don't understand why the proxy settings disappear once a live WLAN connections is set.
Does anybody know how I can fix this.
I have tried running the no proxy cab which didn't help.
Thanks for any help
I am so frustrated I want to take this thing back to the store if I can't use it on my corporate network.
it probably does this since the proxy gets sent to you once you connect to a network, and the WiFi connection you are connecting to tells the Kaiser it needs no proxy... your corporate network should sent the proxy automatically, mine does (the wired one, not WiFi)
I called HTC support and they said this was a Mobile 6 bug. They said that they are going to work with MS to create a fix for this issue.
My thoughts are on this, is this going to affect a massive amount of user who have to connect through proxy on their corporate network.
This sucks cause I'm to cheap to pay for the data plan.
Holding my breath for a QFE from Microsoft. I sure not to soon though.
That isn't a WM6 bug. I have an ASUS device, which makes no problems with the proxy settings. It is probably a WM bug combined with the HTC specials.
Regards
Possibly found a solution
http://forum.xda-developers.com/showthread.php?p=1990412#post1990412
Neil
I have a weird loss of web connection that I haven't been able to find an explanation for.
I have a Tilt, and am using Schaps 4.30 with the 1.27.12.17 radio. I've got it set up to connect to our corporate Exchange as well as 2 comcast mail accounts, an earthlink account, and windows live.
All connected just fine, and I could connect to the web fine through PIE up until today. I have a steady 3G connection, and phone service is working fine, but I can no longer surf, and none of the email connections work except for the exchange connection, which is working fine.
I've doublechecked the medianet connection, and the isp connection, and tried to use both, but neither is connecting to anything but what's above. If I turn off the proxy, then nothing works, and I'm hit with a barrage of "connecting" messages.
I also doublechecked the proxy settings in medianet and reset them as per the AT&T website instructions, but still no go.
Any ideas?
I installed BB Connect .106 onto my HTC FUZE and actually got it working, new PIN, IP address, everything seemed fine.
BUT. . .
I found that I could not connect to the internet or get emails, even though the connection settings clearly showed me as being connected to Media Net.
Has anyone else had this problem? If so, is there a workable solution? FWIW, I do acually have a Blackberry plan (BIS) in use with my Bold, but I would like to have the option to switch between the devices as I wish.a
What, no one??? No one at all???
I am using about the same config as you, but all is working fine here. Keep in mind:
1. You have to set up a correct connection (APN) for all internet traffic but BBC (which uses its own non-configurable APN)
2. When you click on an internet link in a Blackberry message, your browser tries to use the BBC set APN to get the page.
3. When you browse to an URL in IE or Opera your browser tries to use the (self set) internet conection APN.
Maybe this helps you solve your problem.
Thanks for the reply. When I have more time to experiment I'll check it out.
Hello friends, i am new to windows mobile but it doesnt mean that am a n00b , i got my Dad's TyTN 2 as he is now using a different phone ,so right now i am in my university hostel which provides free wifi internet facility, i have been using wifi without any issues on my nokia N82 and my laptop but i cant seem to configure my kaiser properly with the wifi settings assigned to me by the university network administrator, the settings which i have is
IPv4 192.0.11.9
subnet mask 255.0.0.0
proxy server 192.0.0.1 port 3128
when i configure these settings on my N82 or laptop ,wifi works fine but it doesnt works on kaiser even though it connects but it doesnt seem to open any web page or update quickgps or any other internet app ,3G/GPRS is working fine on it though and also internet works on it when its connected to the laptop through activesync
can anyone please help me and tell where should i put these three settings , maybe i messed up and inserted wrong setting in other places,
thanks in advance
utsav2707 said:
Hello friends, i am new to windows mobile but it doesnt mean that am a n00b , i got my Dad's TyTN 2 as he is now using a different phone ,so right now i am in my university hostel which provides free wifi internet facility, i have been using wifi without any issues on my nokia N82 and my laptop but i cant seem to configure my kaiser properly with the wifi settings assigned to me by the university network administrator, the settings which i have is
IPv4 192.0.11.9
subnet mask 255.0.0.0
proxy server 192.0.0.1 port 3128
when i configure these settings on my N82 or laptop ,wifi works fine but it doesnt works on kaiser even though it connects but it doesnt seem to open any web page or update quickgps or any other internet app ,3G/GPRS is working fine on it though and also internet works on it when its connected to the laptop through activesync
can anyone please help me and tell where should i put these three settings , maybe i messed up and inserted wrong setting in other places,
thanks in advance
Click to expand...
Click to collapse
Set your wifi settings > power mode > in best performance
that subnet mask does not look right to me. but it's not like I'm some expert network technician lol
gmaniac2008 said:
Set your wifi settings > power mode > in best performance
Click to expand...
Click to collapse
i have already tried that before, as i mentioned too that wifi connects but i cant open any web page on the device
where have you entered the proxy settings?
1. if the wifi connects, you should be able to ping the machines on the LAN that your device has "entered". first make sure this works.
2. for internet to work, the general convention for network admins is to set up a network with a gateway. however, it seems that your network admins have used the proxy approach (probably to better control/filter the content accessed by users on the LAN)...i am not certain where exactly the proxy information needs to be entered on your device for things to work properly but if the answer for (1) above was positive, then my money is on incorrect proxy settings on your device.