Database Develop

O2 Active UI - Uninstall?

No matter what ROM I use, whether its the latest official O2 one or "Pugs" Edited version of it with the 1.03 Radio version, it ALWAYS installs the O2 Active UI.
After every Hard Reset, once Windows has been set up, the device ALWAYS says "Customising in 3 Seconds" and then starts to run a load of installers on which the cancel button does nothing. Then, after these have finished, it asks the "Personal or Corporate" question, and whichever I tick, the O2 Active application is ALWAYS installed at the end of this.
How can I get rid of it? From what I have read, selecting "Corporate" stops the O2 Active program getting installed, but this is NOT true, atleast, not on my XDA2i.
Is it possible to get my device working with Pugs edited latest ROM version with Radio 1.03, WITHOUT having O2 Active installed on it?
Any help would be appreciated, as it is probably a simple fix,
thanks,
Darren

it does
once it asks you for personal or corperate
put a tick in corerate and just underneath enter a password 0506 & that will put it into corp mode
& if you want to gprs settings here they are
connection name
mobile web
modem
cellular line gprs
access point
mobile.o2.co.uk
user name
o2web
password
password
advanced
use server assigned ip
servers
use specific
193.113.200.200
193.113.200.201

Re: Corp install and phone carrier settings
When the option screen appears, if you do not put the corp settings in, it will automatically default the UI install after a few seconds, after you put the code 0506 I think you have press 'enter'.
For your installation of GPRS/WAP/MMS, please follow this link. http://forum.xda-developers.com/viewtopic.php?t=26463 As I have uploaded all the latest Mobile carrier cab installs (V2.0) for the UK, for both contract and PAYG. Just copy the correct cab to your pda device and click to install, simple as that. :lol:

Turns out I bodged my own solution to this problem!!
When it tells you it will Customise the Device in 3 Seconds, Press the SOFT RESET button!
This will reboot the XDA2i into Windows and will NOT run any of the O2 Installers, and so none of the O2 Active will be Installed.
This means that I do not even get asked the Personal or Corporate question.
Thanks for the help tho,
Dazzer.

I have uninstalled the O2 active UI by booting in safe mode and then uninstalling it.
However on rebooting it now says that connections.exe cannot run because some files or libraries are missing.
Can I find out what it has uninstalled and put it back manually as I don't want to have to do a hard reboot and will the cab mentioned above do this?
Thanks

I have uninstalled the O2 active UI by booting in safe mode and then uninstalling it.
However on rebooting it now says that connections.exe cannot run because some files or libraries are missing.
Can I find out what it has uninstalled and put it back manually as I don't want to have to do a hard reboot and will the cab mentioned above do this?
Thanks

Strange (null) In Kaiser HTC Homeplug

Hi all
I installed the HTC Home plug Based on the Kaiser one. With the Weather Patch
But now I have a strange problem. In the Weather Tab it says (null) instead of High or Low.
Same go's for the Ringtone.
Well the problem is: When I reload the Plug it works. But when I reboot my device it show op (Null) again until I reload the Plugin.
Does anyone know this problem???
Thanks in advance.

Same problem, haven't found a real fix yet but I got a workaround you can try.
After every reset of the device follow these steps.
- Disable HTC Home from the today screen.
- Open HTC Home Customizer
- Change some minor detail (usually selected weather city for me)
- Save
- Go back to today screen and HTC home is there with all language files working magically.
It's a bit of a pain in the ass but I haven't found a better solution just yet. Hopefully someone else can answer this for us but in the meantime you can use my cheap method to make it look right.

You have to rename:
windows\HTCHome.dll.0409.mui
windows\HTC_HDlg.exe.0409.mui
windows\HH_0409_WeatherCities.xml
to your locale variable (if your rom isn't wwe), in my case it's spanish (0C0A):
windows\HTCHome.dll.0C0A.mui
windows\HTC_HDlg.exe.0C0A.mui
windows\HH_0C0A_WeatherCities.xml
It worked for me.
There's another way to do it, harder but way better, i usually do this with my own cabs because after a hard reset i don't like having to change everything again. Steps:
1- Decompress the cab with winrar
2- Edit the file "setup.xml" and correct things you want to change about installation setup: name of files to install (like in this case), name of registry variables to write (like in 10-button commanager for wing), etc
3- Find and download "Cabpack 1.4", be sure to use the following options for it to work: "compression type = mszip", "Create cabinets for = 16 bit extractor"
4- Use it for re-compressing your modified cab and install.
5- Voilá... great pre-modified cabs that you can keep for the next hard-reset.
Hope you like it. Regards

le_hades said:
You have to rename:
windows\HTCHome.dll.0409.mui
windows\HTC_HDlg.exe.0409.mui
windows\HH_0409_WeatherCities.xml
to your locale variable (if your rom isn't wwe), in my case it's spanish (0C0A):
windows\HTCHome.dll.0C0A.mui
windows\HTC_HDlg.exe.0C0A.mui
windows\HH_0C0A_WeatherCities.xml
It worked for me.
There's another way to do it, harder but way better, i usually do this with my own cabs because after a hard reset i don't like having to change everything again. Steps:
1- Decompress the cab with winrar
2- Edit the file "setup.xml" and correct things you want to change about installation setup: name of files to install (like in this case), name of registry variables to write (like in 10-button commanager for wing), etc
3- Find and download "Cabpack 1.4", be sure to use the following options for it to work: "compression type = mszip", "Create cabinets for = 16 bit extractor"
4- Use it for re-compressing your modified cab and install.
5- Voilá... great pre-modified cabs that you can keep for the next hard-reset.
Hope you like it. Regards
Click to expand...
Click to collapse
GREAT! Im gonna try this out now THanks
The First One WOrked!!!!
Ok but you are right...I dont want to do all that again after Hard Reset. So im going to try make a Modifi on this Cab.. Thanks again

Hello and thanks for this help !
But it doesn't work for me. Maybe you can help me ?
I have the same problem with "null:null"
But the files are already named with my locale variable. (I'm not sure)
windows\HTCHome.dll.040C.mui
windows\HTC_HDlg.exe.040C.mui
windows\HH_040C_WeatherCities.xml
The language of my Windows Mobile 6 is in french. But i want to display weather of "Lausanne" in Switzerland (100C)
You say : if your rom isn't wwe --> How can i see if my rom is wwe ?
Thanks a lot for your answers

Need some help:

1. I have installed Opera Mobile on my TyTN II and it works ok, but if I go to check my mail and wants to open a link in the mail it gives me the error:
The file OperaLaunch can't be opened. It's either not signed with a trusted certificate, or one of the components are not found. If the problem continues you can try to reinstall or reinstall the file.
How do I solve that, without reinstalling Opera, or can I make it use IE instead.
2. Is there a program that can remember pin-codes, cause it's not in there as standard program?
3. How do I make a link from perhaps an .exe file? It's no problem to copy the existing links and edit them, but it has a number in front, and I can't see which number are the latest.
4. Is it possible somehow to use activesync over wifi, or do I need another program, and in that case which one?
Thanks for the help in advance and sorry if it has been answered before.

1. Search for the Opera as default browser post & pay attention to Menneysyys or see his bible here: http://www.pocketpcmag.com/blogs/index.php?blog=3&p=1828&more=1&c=1&tb=1&pb=1
2. Try roboform for PPC
3. You can copy it then paste as shorcut using Reco or other file explorer or even dewsktop. The # you see is a reference to the number of characters in the command, i.e. 46# "\Windows\Start Menu\Programs\File Explorer.exe"
4. Bluetooth is possible with a few hacks & the right version of A/S.

Thanks for the answers
I'll try when I get home, and return if there are any more answers

CDMA Shift Phone

I am posting this info because I need some assistance in getting it to work perfectly I was hoping some of you out there may have some additional insight! thank you
Known Bugs/Issues
1. Incoming Call are directed direct to Voice mail
2. Speaker and Mic are defaulted to off you must enable
3. headset is default off you must first enable speaker then plug in headset
4. if any sound is activated while on a call Headset, Speaker, Mic are automaticly Disabled
HTC SHIFT FULL PHONE
I don't think it is currently need but I have also inclued the hardsspl for CDMA
Be careful with the RealVGA bit if you haven't got an English machine - I have so I couldn't test this bit - I inferred the solution from one of Daniel's posts.
1. Reset SnapVue if you have been hacking it.
- Run Clearstorage.exe (or Settings, Clear Storage)
- Disable Wi-Fi in Vista (Communication Manager)
- Enable Modem
2. Get Access to WM6
- In SnapVue, click Outlook E-mail
- Click Menu,New
- Click Menu,New,Insert Picture
- Where it says "My Pictures", click and navigate to "Windows" directory
- Highlight (using arrow keys) the "Start Menu" directory and copy it (using ctrl-c)
- Navigate into "Settings" directory in "Windows" and paste (ctrl-v). Ignore the calendar error.
- Click Ok and go back to SnapVue.
- Click Settings button and then "Start Menu, Programs, Internet Sharing"
- Click "Connect". The screen will say "Check USB cable.". Switch over to Vista and make sure that you have a network connection.
- Switch back to snapvue and click disconnect.
- Switch back to Vista and open Windows Explorer. From the "Computer" level, keep pressing F5 until you see Pocket_PC.
- Using "Tools, Folder Options" (alt T,O), click on the View tab and make sure that "Hide protected operating system files (Recommended)" is NOT enabled.
- Copy "RegistryEditor.exe" to "Pocket_PC,"\" directory.
- Still on Vista side, Using "Communication Manager", Click "Advanced Settings" and then "Reset Snapvue". Click OK.
- Switch to snapvue and wait for it to start up. If you miss the warning to allow running "RegistryEditor.exe", don't worry - click setting, Start Menu, Programs, File Explorer, then navigate to Windows, StartUp and run it from there.
- In RegistryEditor.exe, navigate to HKEY_LOCAL_MACHINE, Services. Delete the "SnapVue" entry. Click and hold the "SnapVue" entry until the context-sensitive menu appears, then select delete.
- Navigate to HKEY_CLASSES_ROOT\Cabfile\Shell\Open\command and change the default value to wceload.exe "%1" /nodelete - there is a space after the .exe and before the /nodelete here
- Close RegistryEditor.exe.
- In File Explorer, delete the PKG.exe and BlockTitleBar.exe files from the Windows\StartUp directory.
- Switch back to Vista and reset snapvue from Communications Manager's Advanced Settings.
- Switch back to SnapVue. When it has finished starting up and you have closed RegistryEditor, you will notice that you have the start menu at the top left of the screen.
- Tidy up - reset and delete "Start Menu" from the "Windows, Settings" directory
Pat yourself on the back! You have successfully converted the HTC shift's SnapVue to WM6.
2a. Enable all the hidden "Today" items
- Switch to WM6
- Click "Start Menu (icon at top left of screen), Programs, Internet Sharing"
- Click "Connect". The screen will say "Check USB cable.". Switch over to Vista and make sure that you have a network connection.
If not - go to Vista Connection Manager and stop and start the modem.
- go back to snapview disconnect and then connect again
- switch back to Vista
- Switch back to snapvue and click disconnect.
- Switch back to Vista and open Windows Explorer. From the "Computer" level, keep pressing F5 until you see Pocket_PC.
- In Vista, install and run ceregedit_setup.exe
- Press F1 to connect to WM6
- Use Tools, Unlock Registry to enable the import
- Use Edit, Import to import "today.reg". Ignore any errors.
- Close ceregedit
- Switch to WM6
- In "Start Menu, Settings, Today, Items", pick the today items you want to display.
3. Change the display resolution to 96 dpi (BE SURE THAT THE CHECK BOX FOR DISABLE PHONE SKIN IS CHECKED)
A word of warning - this version of RealVGA is English and does not work very well with non-English systems.
- If you have a non-English version of the Shift, then you will not have a directory called \Windows\StartUp. Before doing the rest of this section, you should create a "StartUp" directory in your Windows directory and copy all of the files from your language equivalent of StartUp.
- Switch to WM6
- Click "Start Menu (icon at top left of screen), Programs, Internet Sharing"
- Click "Connect". The screen will say "Check USB cable.". Switch over to Vista and make sure that you have a network connection.
If not - go to Vista Connection Manager and stop and start the modem.
- go back to snapview disconnect and then connect again
- switch back to Vista
- Switch back to snapvue and click disconnect.
- Switch back to Vista and open Windows Explorer. From the "Computer" level, keep pressing F5 until you see Pocket_PC.
- Copy "RealVGA_11.CAB" and "ResPack96dpi.ARM.CAB" to "Pocket_PC,"\" directory.
- Switch over to WM6
- From File Explorer (Start Menu, Programs, File Explorer), navigate to the top directory (using Up button as necessary)
- Install RealVGA_11.CAB accepting the security warning
- Install ResPack96dpi.ARM.CAB accepting the security warning and select ok to restart the system
- Run RealVGA from Start Menu, Programs
- Change to 96dpi and press OK and wait while the system restarts
- Tidy up - Using "Start Menu, Settings, System, Remove Programs" remove WM6_RealVGA (its job is done)
- In File Explorer, delete the 2 CAB files.
hkey_local_machine\system\state\phone
block voice MO call Change Registry from 1 to 0
CONGRATULATIONS!!!!!
Voice Calls are now enabled with working mic and speaker through headset also speaker phone works
1. Incoming Call are directed direct to Voice mail
2. Speaker and Mic are defaulted to off you must enable
3. headset is default off you must first enable speaker then plug in headset
4. if any sound is activated while on a call Headset, Speaker, Mic are automaticly Disabled
Side Note: you may want to also adjust these entrys as well
these will give you access to the phones menu options
hkeylm\software\oem\phonesetting
change all keys that begin with hidden from 1 to 0
hkeylm\controlpanel\phone
delete the Redirect key
Here's a link for everything you need
http://rapidshare.com/files/236022979/CDMA_Shift_Phone.rar.html

http://rapidshare.com/files/210940637/CDMA_Shift_Phone.rar.html
'This file is neither allocated to a Premium Account, or a Collector's Account, and can therefore only be downloaded 10 times.
This limit is reached.
To download this file, the uploader either needs to transfer this file into his/her Collector's Account, or upload the file again. The file can later be moved to a Collector's Account. The uploader just needs to click the delete link of the file to get further information.'
Link is down. Only ten downloads till it expired. Please post to a premium rapidshare account or send the download link again and I will post for you.

link has been updated

cybericebyte said:
link has been updated
Click to expand...
Click to collapse
Thanks much, downloading now !

Trashed Snapvue
I ran the CustomRuu from the zip file you posted, and managed to get into a loop where Windows Mobile will not boot. I can get into the bootloader with tools I downloaded on XDA, but have not found a ROM that will install without an error. Do you have a CDMA compatible ROM or even the original ROM that comes with the device. Will dive into the box to see whats on the disks next.
Need help though.

the orginal rom should be included in the zip folder

ShiftCDMAFLASH is the folder that I flashed (successfully) that left me in bootloader (three color screen).
RUUNBh is in the upper middle of the screen
CLI 0200
SPL 0.14.000
appear below, and USB in a white box appears below that.
The ShiftCDMAFLASH.zip file contains a different nbh rom file from the folder above, but I cannot get past 0% on the loader screen. I have used ecshift.exe -bl to get back in bootloader mode and hard resetted the Windows mobiel side, but no luck yet. Any suggestions ? +

just give it time

The 0.19 nbh file give a 262 error
On the other hand I can flash the 1.14.651.1 Rom with no trouble but I reboot (even after a hard reset) into the tri color screen with USB on the screen as listed above. Stalled in this mode.
Any other options ? or roms that might work. The GSM roms on XDA also crash out so I am locked in the 1.14.651.1 bootloader mode.....grrrr.
Is there another option I am missing ? I also tried the Snapvue reset program for Vista from the HTC website

Snapvue Software version 1.14.651.1
Snapvue Software version 1.14.651.1 is the one that I installed on my CDMA shift and now cannot get out of bootloader screen (tricolor) despite hard resetting the WM side. I am able to reflash the above listed rom with no errors. But still end up in the bootloader screen.
No other posted rom on XDA will load (probably due to GSM/CDMA differences). Do you have an alternative CDMA rom I could use or is there a way to get out of the bootloader and force WM to load that I am missing ?

use mtty should be posted on site

Used mtty
Thanks. I had been usimg mtty. I can successfully hard reset but WM boots back into the tri color bootloader screen following hard reset. lol. Still stuck. Thanks for the suggestion though.

now do ecshift mode 0 then mode reset

cybericebyte said:
now do ecshift mode 0 then mode reset
Click to expand...
Click to collapse
Thanks, I have been doing all of the above. Restarts into the tricolor screen. I can reformat with the rom you provided. Still tricolor on hard reset. Something in the rom is preventing wm from loading. Anything else left to do ?

I am probably going to need to give up. The snapvue side is toast. Unless there is someone with the original CDMA Rom out there willing to post online (even HTC) I do not think I can make this work.

Original CDMA ROM
Hello, I had exactly the same problem, my SnapVue stood in bootloader...
CMONEX gave me a ROM for CDMA Shift (I think is the original), it worked for me
you can download it from here:
http://srmpro.gas.pemex.com/video/R....30.00_1.33_PRL60711_SHIP_MO_Disable_PPST.exe
this link wont be available forever, if you can download and upload it to a site like megaupload it will be great!
hope this helps

rafaelc said:
Hello, I had exactly the same problem, my SnapVue stood in bootloader...
CMONEX gave me a ROM for CDMA Shift (I think is the original), it worked for me
you can download it from here:
http://srmpro.gas.pemex.com/video/R....30.00_1.33_PRL60711_SHIP_MO_Disable_PPST.exe
this link wont be available forever, if you can download and upload it to a site like megaupload it will be great!
hope this helps
Click to expand...
Click to collapse
Quick response thanks. Will try it out today and post my results. I did download and reupload to rapidshare. Here is the link.....
http://rapidshare.com/files/2374198....30.00_1.33_PRL60711_SHIP_MO_Disable_PPST.exe
I hope CMONEX is okay with that.

Was able to get Snapvue up and running with the exe file listed above. Did not need to do anything else. Thanks for posting. Will need to be more careful when testing new roms.

nmhusa said:
Was able to get Snapvue up and running with the exe file listed above. Did not need to do anything else. Thanks for posting. Will need to be more careful when testing new roms.
Click to expand...
Click to collapse
Excelent!
you are right, but that kind o things is part of the learning process

Thanks again for all the help.
Also managed to fix the Font sizes in Snapue via registry edits so that they increase in proportion to the scaled screen resolution with RealVGA. Until I figure out how to HardSPL the CDMA Shift and cook a custom rom, this will have to do.

[THE]Blacberry WM6.5

Hi All,
I found a solution, how BlacKberry connect can run under WM6.5 on Raphael.
Here it is:
Change device ID, from Start -> Settings -> System -> About -> Device ID to TouchPro
3. Install a registry editor, then edit
HKLM\System\Versions\AKU key, change whatever in there (like .0.0.3) to .1.6.0
4. Install BBConnect 4.0.0.103.
5. Setup with Blacberry Desktop software.
Hope this is helpfull.
Cheers,
Zsocee

quick question changing the device id wont mess with any installed programs that use the device name for registration keys will it?
and can anyone else verify this works?

freekquency said:
quick question changing the device id wont mess with any installed programs that use the device name for registration keys will it?
and can anyone else verify this works?
Click to expand...
Click to collapse
It will certainly, if you have programs installed which use the ID for their registration.
But I doubt that the device ID need to be changed to make that go. Changing the AKU version in the registry was since ever the trick to make BBConnect working on older devices. I think this is the only requirement.
Thanks Zsocee, I will try that.

freekquency said:
quick question changing the device id wont mess with any installed programs that use the device name for registration keys will it?
and can anyone else verify this works?
Click to expand...
Click to collapse
Hi,
I have tried with couple of 6.5 ROMs, and worked well.
Pls report if this is not working for you.
Cheers,
Zsocee

I've tried this trick only come to find out that when I change the device ID to TouchPro it changes the keyboard mapping. Also I tried just to change the AKU but that didn't help. Been using DA_G roms.

Has already been discussed here
http://forum.xda-developers.com/showthread.php?t=510461

Zsocee said:
Hi All,
I found a solution, how BlacKberry connect can run under WM6.5 on Raphael.
Here it is:
Change device ID, from Start -> Settings -> System -> About -> Device ID to TouchPro
3. Install a registry editor, then edit
HKLM\System\Versions\AKU key, change whatever in there (like .0.0.3) to .1.6.0
4. Install BBConnect 4.0.0.103.
5. Setup with Blacberry Desktop software.
Hope this is helpfull.
Cheers,
Zsocee
Click to expand...
Click to collapse
Does this only work with BES accounts or does it work with BIS accounts also?

Zsocee said:
Hi All,
I found a solution, how BlacKberry connect can run under WM6.5 on Raphael.
Here it is:
Change device ID, from Start -> Settings -> System -> About -> Device ID to TouchPro
3. Install a registry editor, then edit
HKLM\System\Versions\AKU key, change whatever in there (like .0.0.3) to .1.6.0
4. Install BBConnect 4.0.0.103.
5. Setup with Blacberry Desktop software.
Hope this is helpfull.
Cheers,
Zsocee
Click to expand...
Click to collapse
Hi Zsocee,
Thanks for your brilliant tip. I have tried the registry change on my Diamond, WM6.5, TF3D2, Rhodium, BBConnect 4.0.0.106 and it works!!!! Big thanks

doctajay said:
Does this only work with BES accounts or does it work with BIS accounts also?
Click to expand...
Click to collapse
Hi,
to be honest I don't know I'm using BES.
Br,
Zsocee

Tried it exactly that way but how often do you get a "Security Service died unexpectedly!"?

Blackberry Connect on Tilt2
I tried setting the registry and ID setting but after running the Blackberry Connect Desktop application it didn't install on my Tilt2. It did install on my desktop of course not where I needed it. It acted like my Tilt2 wasn't even connected via Activesync.

Zsocee said:
Hi All,
I found a solution, how BlacKberry connect can run under WM6.5 on Raphael.
Here it is:
Change device ID, from Start -> Settings -> System -> About -> Device ID to TouchPro
3. Install a registry editor, then edit
HKLM\System\Versions\AKU key, change whatever in there (like .0.0.3) to .1.6.0
4. Install BBConnect 4.0.0.103.
5. Setup with Blacberry Desktop software.
Hope this is helpfull.
Cheers,
Zsocee
Click to expand...
Click to collapse
works like a gem thanks i use bb connect 4.0.0.106 still works