Hi All,
I found a solution, how BlacKberry connect can run under WM6.5 on Raphael.
Here it is:
Change device ID, from Start -> Settings -> System -> About -> Device ID to TouchPro
3. Install a registry editor, then edit
HKLM\System\Versions\AKU key, change whatever in there (like .0.0.3) to .1.6.0
4. Install BBConnect 4.0.0.103.
5. Setup with Blacberry Desktop software.
Hope this is helpfull.
Cheers,
Zsocee
quick question changing the device id wont mess with any installed programs that use the device name for registration keys will it?
and can anyone else verify this works?
freekquency said:
quick question changing the device id wont mess with any installed programs that use the device name for registration keys will it?
and can anyone else verify this works?
Click to expand...
Click to collapse
It will certainly, if you have programs installed which use the ID for their registration.
But I doubt that the device ID need to be changed to make that go. Changing the AKU version in the registry was since ever the trick to make BBConnect working on older devices. I think this is the only requirement.
Thanks Zsocee, I will try that.
freekquency said:
quick question changing the device id wont mess with any installed programs that use the device name for registration keys will it?
and can anyone else verify this works?
Click to expand...
Click to collapse
Hi,
I have tried with couple of 6.5 ROMs, and worked well.
Pls report if this is not working for you.
Cheers,
Zsocee
I've tried this trick only come to find out that when I change the device ID to TouchPro it changes the keyboard mapping. Also I tried just to change the AKU but that didn't help. Been using DA_G roms.
Has already been discussed here
http://forum.xda-developers.com/showthread.php?t=510461
Zsocee said:
Hi All,
I found a solution, how BlacKberry connect can run under WM6.5 on Raphael.
Here it is:
Change device ID, from Start -> Settings -> System -> About -> Device ID to TouchPro
3. Install a registry editor, then edit
HKLM\System\Versions\AKU key, change whatever in there (like .0.0.3) to .1.6.0
4. Install BBConnect 4.0.0.103.
5. Setup with Blacberry Desktop software.
Hope this is helpfull.
Cheers,
Zsocee
Click to expand...
Click to collapse
Does this only work with BES accounts or does it work with BIS accounts also?
Zsocee said:
Hi All,
I found a solution, how BlacKberry connect can run under WM6.5 on Raphael.
Here it is:
Change device ID, from Start -> Settings -> System -> About -> Device ID to TouchPro
3. Install a registry editor, then edit
HKLM\System\Versions\AKU key, change whatever in there (like .0.0.3) to .1.6.0
4. Install BBConnect 4.0.0.103.
5. Setup with Blacberry Desktop software.
Hope this is helpfull.
Cheers,
Zsocee
Click to expand...
Click to collapse
Hi Zsocee,
Thanks for your brilliant tip. I have tried the registry change on my Diamond, WM6.5, TF3D2, Rhodium, BBConnect 4.0.0.106 and it works!!!! Big thanks
doctajay said:
Does this only work with BES accounts or does it work with BIS accounts also?
Click to expand...
Click to collapse
Hi,
to be honest I don't know I'm using BES.
Br,
Zsocee
Tried it exactly that way but how often do you get a "Security Service died unexpectedly!"?
Blackberry Connect on Tilt2
I tried setting the registry and ID setting but after running the Blackberry Connect Desktop application it didn't install on my Tilt2. It did install on my desktop of course not where I needed it. It acted like my Tilt2 wasn't even connected via Activesync.
Zsocee said:
Hi All,
I found a solution, how BlacKberry connect can run under WM6.5 on Raphael.
Here it is:
Change device ID, from Start -> Settings -> System -> About -> Device ID to TouchPro
3. Install a registry editor, then edit
HKLM\System\Versions\AKU key, change whatever in there (like .0.0.3) to .1.6.0
4. Install BBConnect 4.0.0.103.
5. Setup with Blacberry Desktop software.
Hope this is helpfull.
Cheers,
Zsocee
Click to expand...
Click to collapse
works like a gem thanks i use bb connect 4.0.0.106 still works
Related
I am running WM6, but my company implemented push email, and the device is now app unlocked after installing some certificates etc. I cannot run half of my programs - I tried the SDA-Application.exe program, which seemed to be succesful, but did not work. I cannot open a registry editor either.
I search all over this forum but cannot find the answer - how can I app unlock my wizard again?
We are also about to be issued HTC Touches which are similarly app locked, so it would be useful to have a method that worked for both!
Thanks
have you tried the lokiwiz and awizard apps?
rgs
No - these don't do certificate/application unlocking do they - I thought just CID/SIM locking?
PS I tried installing lokiwiz but I can't due to the app lock!
Both awizard and lokiwiz don't simply remove the Unsigned App Policies nor RAPI communication restrictions. What they need to work is for the phone to be in that state (app+rapi unlocked) and that's why there are some CAB that go along that are supposed to be run prior.
You can use my tool (WST - check signature) that does it with a click of a button
cheers
Great tool - didn't connect on Vista, connected on XP but says:
Not needed!
Regsitry settings are already set to use RAPI tools.
But I still cannot run unsigned apps! I have rebooted. I know they added a root and user certificate to the device - all apps have to be signed now.
Do you have any ideas?
Thanks
Sure, get yourself a registry editor and browse to HKEY_LOCAL_MACHINE\Security\Policies\Policies and edit two values:
:00001006=dword:1
:0000101a=dword:1
hope it does the trick
I tried mobile reg editor, which lets you edit the registry from a PC, and one of the reg keys was set to 0. But I changed it, rebooted, and same probem
hsclater said:
I tried mobile reg editor, which lets you edit the registry from a PC, and one of the reg keys was set to 0. But I changed it, rebooted, and same probem
Click to expand...
Click to collapse
Ok, looks like they changed some other settings that interfere with the permissions.
Check if HKEY_LOCAL_MACHINE\Security\CertMod\AllowUntrustedApps is set to DWORD: 1
Hang on I figured it out....the 00001006 key was for some reason not applied once I rebooted. Thanks for all the help!
For anyone needing to do the same - I had to download mobile registry editor from http://mobile-registry-editor.en.softonic.com/pocket as that allows you to edit keys from the PC without installing anything.
My new problem, is that on our touch/elf I cannot change this key with this program as it says access denied - so there must be some registry permissions on there.
hsclater said:
Yes that is set to 1. It should be right?
Click to expand...
Click to collapse
I pointed that because when i set it to 0 the phone refused to install apps so i thought it was the responsible registry value.
Must be another one then...
Thanks for all your help - my wizard is now sorted.
Any idea how they restricted the registry on a touch so I can't change that value?
hsclater said:
Thanks for all your help - my wizard is now sorted.
Any idea how they restricted the registry on a touch so I can't change that value?
Click to expand...
Click to collapse
I believe those settings are more related to WM6 than to the specific device so they should be the same.
btw, how did you sort it out? I'd like to know for future use
tx
Mine was just fixed by changing the 1006 value. The first time, the phone didn't take the change, but the second time it did and now works.
But the touch, it won't let me edit the registry remotely - access denied.
Cheers.
upload Cert_SPCS.cab to your phone and run it
PS:
sorry for asking but i didn't read your edit before
I have tested a few HTC Comm Managers(new black theme. Kaiser style) and low and behold non of them have the wifi working right. I cannot enable/disable it from the comm manager. Anybody find a real working one that does this? Even some that were claimed to be "FIXED" didn't work...
Anyone have a dump of the original also? (stock WM6)
I've got the same problem since the upgrade to WM6. Nothing works: soft-hard reset, upgrade... WLAN doesn't works (since comm manager).
me too...any solution mods?
Same problem here... The default WM6 HTC comm manager is working corectly.
anyone have a cab file of the original? incase i want to revert back to it?
You might find the fix here:
http://forum.xda-developers.com/showthread.php?t=326655&highlight=wing+10+button
What's wrong with it?
I'd tried to install http://forum.xda-developers.com/attachment.php?attachmentid=48832&d=1188607222
And then, the following message: "Installation was unsuccessful. The program or setting cannot be installed because it does not have sufficient system p ermissions"
...
When I try to do the change in registry, a new surprise: in the registry tree, after CommManager doesn't exist "WLAN", but numbers (0,1,2,3... and in 3 there's WLAN). The change in registry: NOT WORK YET!
I've found the problem (maybe...). In folder "Connections" there's not Wi-Fi icon... what it means?
pichetinhas said:
What's wrong with it?
I'd tried to install http://forum.xda-developers.com/attachment.php?attachmentid=48832&d=1188607222
And then, the following message: "Installation was unsuccessful. The program or setting cannot be installed because it does not have sufficient system p ermissions"
...
(
Click to expand...
Click to collapse
SAME THING HERE! No permission to do this! I hope this does not result in a hard reset.
OK, I finally got anew one installed. Even though I tried a fresh install after a reboot, I still couldnt get it installed. So, what I did was start commmanager, Bthen stop it in Settings > Memory > Active programs
REALLY A GENIE!!! I'll try it...
It's Ok! Now, I could installed the comm manager, but it doesn't work... What I must fix exactly?
This is exactly what I did:
- Step 1: Copy to the phone and run it.
- Step 2: (Fixing WLAN button malfunction, somehow it doesn’t work by default on Wing): **Thanks for beowulf6’s post for this fix.
Change "HKEY_LOCAL_MACHINE \SOFTWARE \HTC \CommManager \WLAN= "Windows WLanMgr.exe " "DeviceName" = "{98C5250D-C29A-4985-AE5F-AFE5367E5006} TNETW12345"
the end of this long String is the WLAN-Adaptername of the Device.
just change in this Example "TNETW12345" into "TNETWLN1"
-Step 3: (Fixing Wi-Fi setting launch issue) **Thanks for phatman81’s post for this fix.
Change "HKEY_LOCAL_MACHINE\SOFTWARE\HTC\CommManager\WLAN\ Default:"
\Windows\WlanMgr.exe --> \Windows\ctlpnl.exe
After all this... The WLAN icon is always off...
Nobody else has the same problem? It's incredible!! I begin to think that I've done something wrong. It has began after the upgrade to WM6... Now, I can't downgrade to WM5 because I don't have the rom WM5 original... :'(
That CommManager dosen't seem to work well. I had problems with it. I found another one that DID work though.
grizzley said:
That CommManager dosen't seem to work well. I had problems with it. I found another one that DID work though.
Click to expand...
Click to collapse
hi, can you please point me to where you downloaded this??
hello
i have the same problem. wifi card not run.
the problem? http://forum.xda-developers.com/showthread.php?t=322225
i d´nt know.
anyone a idea? thanks
Do a search. You will find that you have to edit the settings in the registry for the comm manager.
I have this same problem. If anybody has a cab file of the stock tmo com manager, please post it!
Thanks in advance!
You guys...
Go into the registry and find out what the name is for the wireless adapter is. Take that information and change the adapter that is shown in the comm manager.
Thats really all there is to it.
If youre going to screw with the software, youre going to need to blood on your hands. You cant just throw stuff on the phones and expect it to work.
All right...
On my wing
\\\registry\HKLM\Software\HTC\CommManager\WLAN\<DeviceName>
{98C5250D-C29A-4985-AE5F-AFE5367E5006}\TNETTWLN1
That is the adapter for my phone, might be the same for you.
If youre using the changable comm manager you will have to change the settings for the wlan setup.
\\\registry\HKLM\Software\HTC\CommManager\WLAN\<Default>
\Windows\WrlsMgr.exe
Once again might be different for you.
Im using TouchIT 2.3 my stuff might be different.
I GOT IT
pichetinhas said:
It's Ok! Now, I could installed the comm manager, but it doesn't work... What I must fix exactly?
This is exactly what I did:
- Step 1: Copy to the phone and run it.
- Step 2: (Fixing WLAN button malfunction, somehow it doesn’t work by default on Wing): **Thanks for beowulf6’s post for this fix.
Change "HKEY_LOCAL_MACHINE \SOFTWARE \HTC \CommManager \WLAN= "Windows WLanMgr.exe " "DeviceName" = "{98C5250D-C29A-4985-AE5F-AFE5367E5006} TNETW12345"
the end of this long String is the WLAN-Adaptername of the Device.
just change in this Example "TNETW12345" into "TNETWLN1"
-Step 3: (Fixing Wi-Fi setting launch issue) **Thanks for phatman81’s post for this fix.
Change "HKEY_LOCAL_MACHINE\SOFTWARE\HTC\CommManager\WLAN\ Default:"
\Windows\WlanMgr.exe --> \Windows\ctlpnl.exe
After all this... The WLAN icon is always off...
Nobody else has the same problem? It's incredible!! I begin to think that I've done something wrong. It has began after the upgrade to WM6... Now, I can't downgrade to WM5 because I don't have the rom WM5 original... :'(
Click to expand...
Click to collapse
If u wanna know your adapter go to
HKLM\comm\tcpip\linkage
mine is SDIO86861 and in linkage folder it is shown ppp SDIO86861
Hope this info helps u
Installed and working on Kaiser WM6 !
Manual install process :
1. Unpack the attached ZIP file with subfolders.
2. Copy all the files to the appropriate folders on your PDA.
3. Change the registry according to the attached registry.txt (change 2 keys and create 4 new)
4. Completely turn off your PDA (to renew the registry). Reset button does not work.
5. Switch the device on.
6. In order to enter the PIN code do: Start -> Settings -> Phone -> Enter your PIN
Now you have an Avaya One-X as a dialer.
Do not forget to fill settings.ini with your own settings.
Enjoy !
baudy2 said:
Installed and working on Kaiser WM6 !
Manual install process :
1. Unpack the attached ZIP file with subfolders.
2. Copy all the files to the appropriate folders on your PDA.
3. Change the registry according to the attached registry.txt (change 2 keys and create 4 new)
4. Completely turn off your PDA (to renew the registry). Reset button does not work.
5. Switch the device on.
6. In order to enter the PIN code do: Start -> Settings -> Phone -> Enter your PIN
Now you have an Avaya One-X as a dialer.
Do not forget to fill settings.ini with your own settings.
Enjoy !
Click to expand...
Click to collapse
What is it? A phone dialer??? I've never heard of it before. Any screenshot?
Can you provide any screenshots???
It looks like a VOIP client
http://www1.avaya.com/campaign/demo/one-x/index.html
could you please provide more info on Avaya one-x? what are the benefits of running this?
thanks!
I believe you need an Avaya VoIP system to get the one x client to work. I know they had a version for thier IP Office system but I don't think they ever updated it to run on WM6
Guys,
This is an application for WM which replaces the standard phone dialer and in addition to regular WM phone functionality it allows:
1. Manage your desktop office phone directly from your mobile
2. Make all operations like call forwarding, EC500 management, etc directly from your mobile.
It requires to have an Avaya VOIP PBX installed at your office.
Without it, it does not make sense at all.
Hi
We have an Avaya VOIP PBX installed at our office..
Could please tell us to connect HTC Touch Cruise wm6!
We have tried everyway we could, and read every document available on avaya support page, with no luck.
thank you in advance.
sortlaih said:
Hi
We have an Avaya VOIP PBX installed at our office..
Could please tell us to connect HTC Touch Cruise wm6!
We have tried everyway we could, and read every document available on avaya support page, with no luck.
thank you in advance.
Click to expand...
Click to collapse
Look on Avaya's website and see if thy have the client available to dowload. Last time I checked it was for WM 2003.
Anyone managed to install gmail.jad from gmail.com/app on Kaiser?
I've tried 3 different jvms - to no avail... Results in error messages saying the .jad is invalid. Kaiser not supported yet?
do you have a midlet manager installed?
install the attached file and then try to install your java based app.
grandpareza said:
do you have a midlet manager installed?
install the attached file and then try to install your java based app.
Click to expand...
Click to collapse
Thanks man,
Of course I do, I tried 3 different ones: Intent, IBM MIDP 2.0 and Esmertec JBed and none of these worked. Those were the midlet managers that gave the error messages actually...
Just tried your version of Esmertec JBed, and I WAS ABLE TO INSTALL the gmail.jad midlet with the help of it! Still it won't run for some reason though... Guess I gotta do some more digging...
Thanks!
Have you made any progress in your search?
I had a similar issue with the IBM MIDP a while back, so I'm interested to see if how you've fixed the problem.
Do you happen to use Dutty's ROM?
I just installed this one to test and it worked for me on my Kaiser.
http://el8.org/gmail.jad
ROM: NoThrills WM 6.1 WWE *English* V3 - The first ROM with the brand new OS build 19202!
http://forum.xda-developers.com/showthread.php?t=379411
Esmertec Jbed Build ID 20080222.3.1
you, sir, are a genius
where did you find that jad file???? i've been looking for a version of the new gmail applet (1.5.0) that would work with jbed and i couldn't find it ANYWHERE.
i have no idea where you got that file, but please accept my sincere thanks!
Your welcome. I did a search on Google for the following: gmail.jad
I found the link for that file on the last hit of the first page of results.
I can confirm it works on a Mio Digiwalker A501 as well
thx!
i cant install GMAIL applet. it asks if i want to install the unsigned applet but neither YES, no NO Buttons work.
Try this one
what does JBed3dMod_RU_FIX.zip do?
it installed.. just needed internet connection
can't find application
Hello! I successfully install the gmail.jar file and it runs quite well on my htc touch cruise. My problem is that after I close the application I can't find it anywhere in my file browser. The only way I can restart the app is to chose to reinstall the cab file, and then cancel the installation. After that it puts me to a folder called "Java" and there I can see the app and able to start. I think I should run Gmail through the previously installed the Cloudyfa_EsmertedJbed but I'm not able to find where it is installed on the device. Not even the search function is able to find it. Forgive me for being such a lamer and please help me !
qiuness said:
it installed.. just needed internet connection
Click to expand...
Click to collapse
What did you do to fix this? I've tried multiple times to install the Gmail application but it can never connect stating that it needs a Data Connection.
Mine just is stuck on "loading".... too bad because it used to work. I am on a kaiser as well.
ranger47 said:
Mine just is stuck on "loading".... too bad because it used to work. I am on a kaiser as well.
Click to expand...
Click to collapse
co-sign, same here. Any ideas?
i use it all the time on my kaiser with no problems.
goto gmail.com/app in PIE (only works in PIE) and follow the instructions. It auto downloads an appropriate jad. Has worked every time for me, regardless of rom (currently Dutty's 29/04)
It installed perfectly fine for me thru PIE, however (for the guy that couldnt find the install location programfiles>java>Gmail)
but it wont connect, cant seem to get into any settings or anything either.
Was hoping this would work better then setting up gmail thru the mail client, when looking for certain emails w/ attachments and ****, the regular client doesnt have enough options.
Anyway anyone else get this weird need data connection error?
Obviously i have a data connection.
siemi1 said:
Try this one
Click to expand...
Click to collapse
I was having lots of problems installing and then it would get stuck on loading. I used this jbed and it now works perfectly! thanks. I uninstalled the old one. I did some searching and didn't get a good answer - is there a way to hve multiple instances running?
Does anyone have this .cab file?
I tried to search, but no .cab file seen.
USBToPCPopUp 2_2_18191228_0
Here the older version: http://forum.xda-developers.com/showpost.php?p=2652987&postcount=10
Thx.
xmoo said:
Does anyone have this .cab file?
I tried to search, but no .cab file seen.
USBToPCPopUp 2_2_18191228_0
Here the older version: http://forum.xda-developers.com/showpost.php?p=2652987&postcount=10
Thx.
Click to expand...
Click to collapse
I searched google - http://www.4shared.com/file/59922883/248789eb/HTC_Diamond_USBToPCPopUp_10181434321.html
jymbrittain said:
I searched google - http://www.4shared.com/file/59922883/248789eb/HTC_Diamond_USBToPCPopUp_10181434321.html
Click to expand...
Click to collapse
I need the QVGA. Or is this a universal ap.
I need to pls
Up pls...
Pls i need this cab
Dude.... you will get it, you will see (no, not a cab)
There is No USB to PC Pop Up Universal Cab.
As i have understood from research by NFSFAN.
To get this working on specific devices it need specific values FROM that device to be added to the installation.
Hi,
Sorry to crosspost but I have a problem related to UsbToPC:
I am using a custom WM6.1 ROM on a Kaiser.
When I used to plug the USB Cable I had a nice window opening which allowed to choose "ActiveSync" and "Internet Sharing". I think this is the HTCUSBToPCPopUp program.
The problem is I inadvertently clicked the "never ask again" box, and of course the pop up does not appear again... How can I enable it back?
I looked through the registry and the HKLM\Software\OEM\USBtoPC keys seems fine:
AskConnect: 1
Device_Type: 2
DisablePopUpUI: 0
EnableAdvanceChecked: 0
SyncMode: 1
Thanks for your help.
Reply With Quote
where can i get this soft????
Cab required
Anyone who can upload the latest version?
Found this but I think it's only VGA?
http://forum.ppcgeeks.com/showthread.php?p=446304
Is there a QVGA version of this anyway?
Andy
Or is there anyother app to hook my storagecard up2my carradio as a mass-storagedevice?
usbtopcpopup
enodr said:
Hi,
Sorry to crosspost but I have a problem related to UsbToPC:
I am using a custom WM6.1 ROM on a Kaiser.
When I used to plug the USB Cable I had a nice window opening which allowed to choose "ActiveSync" and "Internet Sharing". I think this is the HTCUSBToPCPopUp program.
The problem is I inadvertently clicked the "never ask again" box, and of course the pop up does not appear again... How can I enable it back?
I looked through the registry and the HKLM\Software\OEM\USBtoPC keys seems fine:
AskConnect: 1
Device_Type: 2
DisablePopUpUI: 0
EnableAdvanceChecked: 0
SyncMode: 1
Thanks for your help.
Reply With Quote[/QUOTE
I had the same problem. To fix it (and fix activesync) go to programs/usb to pc which brings up the interface check/uncheck ask when I connect option on bottom. you may also disable the fast sync option (i did both and now I can use activesync)
with beer
retromad
Click to expand...
Click to collapse