Database Develop

.cab queries

Hi,
I need some assistance. I am currently cooking my extended rom. My Extended rom does not have enough space so, i am putting some of my MUST HAVE softwares in my storage so that it installs after a HARD RESET.
But, most .cab files will auto delete upon launch. Is there any way to make
it not delete ? Kindly assist.
Thanx a million

You can avoid the CAB files being deleted by making them read-only.

Well i mean that there is a Registry hack that will not delete .cab's on installation, but you would have to make a .cab with that registry setting and install it as the first thing after hardreset, although i dont think it will work since the registry is already loaded, and the new setting require a reboot to work.
Look in Wiki for registry hacks.
So why dont you just Write protect the .cab's that you want to hold on to

bosjo said:
Well i mean that there is a Registry hack that will not delete .cab's on installation, but you would have to make a .cab with that registry setting and install it as the first thing after hardreset, although i dont think it will work since the registry is already loaded, and the new setting require a reboot to work.
Look in Wiki for registry hacks.
So why dont you just Write protect the .cab's that you want to hold on to
Click to expand...
Click to collapse
i have tried that but, dont work

All my "wanna hang on to" .cab's are write protected, and non of them get deleted upon installation.
Manuel installation that is.

bosjo said:
Well i mean that there is a Registry hack that will not delete .cab's on installation, but you would have to make a .cab with that registry setting and install it as the first thing after hardreset, although i dont think it will work since the registry is already loaded, and the new setting require a reboot to work.
Look in Wiki for registry hacks.
So why dont you just Write protect the .cab's that you want to hold on to
Click to expand...
Click to collapse
ermm.. how do i go about it... i wanna auto install stuff like Pocket Informant , SPB Pocket Plus and my must have s/w upon hard reset
Thats why i need to coookkk

I have room enoughf in my ExtRom, so I have never auto installed from other than the ExtRom.
But I'm almost 100% sure that there was a topic on auto installing from \Storage (Card) sometime ago.
Maybee youll find some info in the Wiki
http://wiki.xda-developers.com/index.php?pagename=BA_RomKitchen

bosjo said:
I have room enoughf in my ExtRom, so I have never auto installed from other than the ExtRom.
But I'm almost 100% sure that there was a topic on auto installing from \Storage (Card) sometime ago.
Maybee youll find some info in the Wiki
http://wiki.xda-developers.com/index.php?pagename=BA_RomKitchen
Click to expand...
Click to collapse
well, i dont seem to find anything of what i am looking for

Wait a day or two, maybe someone who knows come along.

You can use a software name Cabinst wich let you install a cab without deleting it.
Easy.

Hi,
Easiest way is to make cab read only. Browse the storage card using PC via activesync. Right click on cab file. Go to properties and make it readonly.
You can also change the deafult beahvior of Instal by changing registry key.

Shikra said:
Hi,
Easiest way is to make cab read only. Browse the storage card using PC via activesync. Right click on cab file. Go to properties and make it readonly.
You can also change the deafult beahvior of Instal by changing registry key.
Click to expand...
Click to collapse
change which part of it ?

http://forum.xda-developers.com/viewtopic.php?t=16377
M4io said:
in browsing my editor i stumbled upone these :
Code:
[\HKLM\SOFTWARE\Apps\Microsoft Application Installer]
fAskDest=0
fAskOptions=0
fEnablCef=0
nDynamicDelete=2
Supported="PALM PC"
* fAskDest=1 gives you a popup when you install a CAB so you can install on Storage Card for example
* fAskOptions=1 asked before overwriting, haven't found out if/what other options
*fEnableCef : I haven't messed around with that
* nDynamicDelete=0 and the CAB file remains, =1 it disappears but what the difference with the default value 2 is I couldn't figure out.
So if anyone else wants to experiment with it and post their findings
I searched Google but all I could find was about fAskDest
Click to expand...
Click to collapse

keep the ext rom empty,
after reboot hack the reg to point to new area.
Run the autorun from threre.
Have all files as read only.
info under
http://forum.xda-developers.com/viewtopic.php?p=83119#83119
Only problem is that all cabs are installed in the default location.
I have yet to get cabinstall to run in batch mode using the nscript tool.
Hope its what you are after

XDA Mini S ROM update

Hi
Am newbie to the whole XDA thing (am just converting from BB), have managed to unlock my XDA Mini S and tried running K-JAM_WWE_216901_2169101_020721_ship.exe as i heard this would reflash the ROM to the latest (a friend of mine gave me this copy).
Got an error during this, and wondered if there was a specific XDA Mini S version (have searched on the site and it appears that there is on ftp://ftp.xda-developers.com/Wizard) and there are many different ROMS under the ROM directory, but i am unable to login to this site.
Am i just being thick here.
Any help gretaly appreciated.

That ROM upgrade worked ok on my xda-mini-s
When I upgraded my ROM I done the following.....
#unlock phone
with no SIM card in phone
copy EnableRapi.cab to phone
run EnableRapi.cab from phone
run lokiwiz.bat from PC
select option 'U' Unlock SIM
phone reboots
add SIM to backout bin file names on PC
run lokiwiz.bat from PC
select option 'C' unlock CID
phone reboots
add CID to backout bin file names on PC
#install new ROM
uncomress ROM file from zip
click ROM install file
follow instruction
takes 10 minutes
phone reboots
Hope this helps

Bilbo,
Hi. I ran through what you put but my Mini S does not auto reboot. I'm not sure the exact definition of a soft reboot is? - Put the stylus in the side or hold the power button for a few seconds?
Either way I cannot get the new KJAM rom on as invalid vendor ID is haunting me.
Any help would be appreciated.
Thank You
Ben

Dudes - I've done the same upgrade to my mini S. Not sure if it's worth the bother. No difference in speed/performance and my keyboard shifted symbols (@?£$) are out of sync. I think I'll go back to the Mini S rom without the customised stuff.

LLcoolJ:
I noticed lots of difference, speed and battery life.
To get the keyboard from US to UK symbols use the following:
Here are the registry changes ....
Keyboard language
Registry: HKCU\ControlPanel\Keybd
Key: Locale (string)
Value: 0809 English UK
0409 English US
0407 German
0419 Russian
040C French
0410 Italian
040A Spanish

benih007 said:
Bilbo,
Hi. I ran through what you put but my Mini S does not auto reboot. I'm not sure the exact definition of a soft reboot is? - Put the stylus in the side or hold the power button for a few seconds?
Either way I cannot get the new KJAM rom on as invalid vendor ID is haunting me.
Any help would be appreciated.
Thank You
Ben
Click to expand...
Click to collapse
The invalid vendor ID is the result of the ROM update..... to get rid of it make sure you run :
run lokiwiz.bat from PC
select option 'U' Unlock SIM
phone reboots
add SIM to backout bin file names on PC
A soft reboot is when you hit the reset button on the right hand side, its like rebooting a PC. A hard reset however is a re-install boot where you loose everything and the ROM is re-installed.

Cheers Bilbo - I've made the changes to the registry and the keyboard talks like me. Your right about battery power as well.

Bilbo.
Thank you for replying and helping.
Let me just go over what you said...
first I ran the loki cab file on the mini S.
run lokiwiz.bat from PC -- done.
select option 'U' Unlock SIM -- done (with sim card removed)
phone reboots -- not automatically though, but I will reboot it after the lokiwiz.bat finishes
add SIM to backout bin file names on PC -- what does this mean? this is not in the lokiwiz instructions and this is where i'm going wrong. Where is the bin file created btw, I can never find it?
I have tried so many combinations i'm starting to lose hope.
If you can help to get this damn thing working I promise to make a donation to this web site.
Thanks for all the good work.
Ben

i managed to get the unlock, but did not do the CID (so will try that).
So once i have done that will the K-JAM_WWE_216901_2169101_020721_ship.exe upgrade work?

Here's how I got mine working. - Remove the Sim card. Make sure you use Lockwiz02b. Select U to unlock from the options menu. The mini S should reboot automatically. Leave the device alone until its functional again and then start Lockwiz02b again. Select C (CID unlock) from the menu. It should reboot again and close down the Lockwiz box. The mini S should now be ready for a rom upgrade. On my first attempt I used the original Lockwiz prog which caused problems for me.

I'm about to do my rom update on my mini s....but this thread is so confusing!
Is there a step by step guide somewhere on the forum???

ROM Upgrade
Upgraded O2 XDA mini without any real problems:
I used the aWizard 1.3 Beta 2 tool which allowed me to carry out the CID Unlock and was pretty easy to understand. What it did not do was pick up the ROM from the rom folder but once I had completed the CID unlock I ran the rom normally and all was well.
So in essence: Connect Mini to PC via Activesync
Run the aWizard Bat file enabling RAPI (This is used to communicate with your XDA once it has done using Activesync). Then select the Unlock CID option. Once completed I then exited the wizard and followed the instructions as part of the rom upgrade and all worked well no hitches except the one mentioned above about the keyboard (now I have to find out how to modify the registry).
So what I used: aWizard 1.3 Beta 2 and QTEK Rom 2.17
186504-ruu_9100_2170702_21707102_20710_qtek_wwe_ship.exe

Mystery Solved!!!!
I finally figured out why its not working....
When I downloaded the loki zip file I opened it up in winzip and dragged the contents to a folder I created. Ran the batch file eveything seemed ok and the unlocker said it unlocked the device.
I have now realised that you have extract the files from the loki zip file and use the folder structure. If you don't, the utils directory is not created and the loki.bat cannot reference some files.
Found the answer on page 12/13 of the loki thread.
Thanks All
Ben

After doing the CID unlock the ROM install worked fine.
Just having the keyboard issue at the moment with symbols, went to:
Registry: HKCU\ControlPanel\Keybd
Key: Locale (string)
Value: 0809 English UK
but could not find the locale key to set to UK?
All i see is:
DefaultKeyLock
InitialDelay
MuteSwitch
RepeatRate
ShowWarningMsg
Am i looking in the right place or do i have to add this in (if so how)?
Cheers

Youv'e got to create a new registry key. Assuming you've got a registry editor. Go to HKEY_CURRENT_USER / Control Panel / Keybd.
Then create a new string value. Name it Locale and give it a value of 0809 for UK. Then reboot.

Just went in a created the new reg key as you mentioned.
Rebooted and it worked.
Many thanks for all your help on this, it is most appreciated.
I am now the converted!!!
So to sum up for anybody else:
Bought XDA Mini S from 02
use Lockwiz02b
Select U to unlock from the options menu
The mini S should reboot automatically
Start Lockwiz02b again
Select C (CID unlock) from the menu
It should reboot again and close down the Lockwiz box
The mini S should now be ready for a rom upgrade.
Then run
K-JAM_WWE_216901_2169101_020721_ship.exe
follow usual prompts.
Once phone is up and running, get a reg edit tool (i used PHMregedit) as the keyboard for a couple of the symbols is out of synch (think it is US style).
Using regedit tool
Go to HKEY_CURRENT_USER / Control Panel / Keybd
Then create a new string value
Name it Locale and give it a value of 0809 for UK
Then reboot.
Mini XDA should now work fine.
I have found that the new push technology for email is faster than Blackberry and more usueful.
Hope this is helpful to others.
Cheers great forum

quick question...
i am fed up with waiting for o2 to release their latest ROM so i am going to take the plunge with this ROM instead, my question is do i have to make any special changes once installed to make it work with O2 UK i.e. mms settings, GPRS settings etc.?
Also i noticed somebody has put together a T-Mobile USA customised ROM any chance that somebody will do this for O2 UK?

hyettd said:
Just went in a created the new reg key as you mentioned.
Rebooted and it worked.
Many thanks for all your help on this, it is most appreciated.
I am now the converted!!!
So to sum up for anybody else:
Bought XDA Mini S from 02
use Lockwiz02b
Select U to unlock from the options menu
The mini S should reboot automatically
Start Lockwiz02b again
Select C (CID unlock) from the menu
It should reboot again and close down the Lockwiz box
The mini S should now be ready for a rom upgrade.
Then run
K-JAM_WWE_216901_2169101_020721_ship.exe
follow usual prompts.
Once phone is up and running, get a reg edit tool (i used PHMregedit) as the keyboard for a couple of the symbols is out of synch (think it is US style).
Using regedit tool
Go to HKEY_CURRENT_USER / Control Panel / Keybd
Then create a new string value
Name it Locale and give it a value of 0809 for UK
Then reboot.
Mini XDA should now work fine.
I have found that the new push technology for email is faster than Blackberry and more usueful.
Hope this is helpful to others.
Cheers great forum
Click to expand...
Click to collapse
The Problem im having here is that once i have created the registry key, it deletes after a reboot. Is there something else i need to unlock to allow writing to the registry?

New Roms
Hi there - I'm sure this is your answer - I have read this on many forums.
WM05 takes a while to store the registry updates after you exit your editor. Make the registry change and wait a minute or so before performing the soft reset.
Hope this helps - we have all fell for this "improvement" to WM5 from the boys at MS.
Regards,
Chris.

:lol:
Thanks Bilbo . . . Spot on. First time to all this and followed it a treat
Thanks All

Extended ROM - Some CABs don't Execute

I'm trying to customize a few Extended ROMs here and I'm running into some stubborn CABs. When installed manually, everything works fine. No warnings, no errors. Just click the CAB, let it do its thing, then click OK.
Put these same ROMs into an Extended ROM and hilarity ensues. Some will work, others will not and I don't know why. Any suggestions on what I might be missing will be greatly appreciated.

Quick question?
Are the CAB's signed, if not are you installing the 'signed' unsign CAB 1st .

Edit: Thinking more about this (and realising that the 1st thing you do is disable signing in your ROM's ) can you provide a little more info about the CAB's (maybe an offending CAB if the content is not private?).
I managed to replicate this issue with a CAB that had a warm reset as part of it's install process (seems to bork the autoexec batch process) and I have had a similar issue with a CAB that just contained some simple OMA in the _setup.xml.
John

yes, that's the point. But how to make any Unsigned CABs become Signed?

huangyz said:
yes, that's the point. But how to make any Unsigned CABs become Signed?
Click to expand...
Click to collapse
Without wanting to sounds facetious you sign them ;-)
You would use a private key to generate an Authenticode signature for the CAB (and maybe the apps inside if you need to) however you would still need to install the ROOT certificate into the code stores on your device. Or get your app signed by a 3rd party with a certificate that has it's ROOT already on the device (MS's MobileToMarket and things like that take care of this for ISV's that need it).
Once you have the ROOT cert on the device in the correct store signing is trivial, you either use SignTool.exe from many of the MS SDK’s or just use the GUI options if Visual Studio is your poison. All you need is an export of the PKF (Private key) and the password to the certificate.
In enterprises one of the 1st things people often do before giving Windows Mobile devices out to users is to install a ROOT certificate for the enterprise onto the device in both the code and transmission stores. This means from then on you can sign in-house apps and CAB’s and they behave as signed commercial apps and you can use features like internal signed SSL for ActiveSync etc. etc.
Don’t forget you can also do away with a lot of this by installing the HTC signed “Disable Certificates” CAB 1st and then the signatures are not checked on subsequent CAB’s, EXE’s or anything code related for that matter.

djwillis said:
huangyz said:
yes, that's the point. But how to make any Unsigned CABs become Signed?
Click to expand...
Click to collapse
Without wanting to sounds facetious you sign them ;-)
You would use a private key to generate an Authenticode signature for the CAB (and maybe the apps inside if you need to) however you would still need to install the ROOT certificate into the code stores on your device. Or get your app signed by a 3rd party with a certificate that has it's ROOT already on the device (MS's MobileToMarket and things like that take care of this for ISV's that need it).
Once you have the ROOT cert on the device in the correct store signing is trivial, you either use SignTool.exe from many of the MS SDK’s or just use the GUI options if Visual Studio is your poison. All you need is an export of the PKF (Private key) and the password to the certificate.
In enterprises one of the 1st things people often do before giving Windows Mobile devices out to users is to install a ROOT certificate for the enterprise onto the device in both the code and transmission stores. This means from then on you can sign in-house apps and CAB’s and they behave as signed commercial apps and you can use features like internal signed SSL for ActiveSync etc. etc.
Don’t forget you can also do away with a lot of this by installing the HTC signed “Disable Certificates” CAB 1st and then the signatures are not checked on subsequent CAB’s, EXE’s or anything code related for that matter.
Click to expand...
Click to collapse
I am NOT a software developer so, most of your opinions sound enigmatic to me except that the last one: put the HTC signed "Disable Cert" in the 1st place of the ext-rom config.txt.
Thanks very much! I'll try later on.

gamescan said:
I'm trying to customize a few Extended ROMs here and I'm running into some stubborn CABs. When installed manually, everything works fine. No warnings, no errors. Just click the CAB, let it do its thing, then click OK.
Put these same ROMs into an Extended ROM and hilarity ensues. Some will work, others will not and I don't know why. Any suggestions on what I might be missing will be greatly appreciated.
Click to expand...
Click to collapse
most problably you forgot to set some cab file to read-only before saving the extende-rom.check the cabs atrebutes and the config.text file while inside de program that you are using to edit the extended-rom.its not because they are not signed as long you got the cert .cab set to be the first to be installed.also cab files that require user input will not work.this is from experience, as posted above.

huangyz said:
I am NOT a software developer so, most of your opinions sound enigmatic to me except that the last one: put the HTC signed "Disable Cert" in the 1st place of the ext-rom config.txt.
Thanks very much! I'll try later on.
Click to expand...
Click to collapse
So, where did you found the signed Disable_Cert.cab?

faria said:
most problably you forgot to set some cab file to read-only before saving the extende-rom.check the cabs atrebutes and the config.text file while inside de program that you are using to edit the extended-rom.its not because they are not signed as long you got the cert .cab set to be the first to be installed.also cab files that require user input will not work.this is from experience, as posted above.
Click to expand...
Click to collapse
Sorry to ping an old thread - flogging to proceed immedietly after...
Being that this is a windows device, isn't there a flag that can be passed when executing the cab - like you can on a windows installer application? Similar to setup.exe -q or whatever you're trying to do. Some flags set the answers to yes, admin mode... you get the picture. Does the cab installer engine allow similar flags to get passed with the cab execution command?

In PPC, it calls wceload.exe to install and uninstall a cab.
As shown in http://msdn2.microsoft.com/en-us/library/ms926281.aspx , the only possible argument is to ask or not ask for destination, but no quiet mode.
How can you call wceload.exe manually at ExtROM installation may be a question.

Wifi not working on any HTC Comm Manager!

I have tested a few HTC Comm Managers(new black theme. Kaiser style) and low and behold non of them have the wifi working right. I cannot enable/disable it from the comm manager. Anybody find a real working one that does this? Even some that were claimed to be "FIXED" didn't work...
Anyone have a dump of the original also? (stock WM6)

I've got the same problem since the upgrade to WM6. Nothing works: soft-hard reset, upgrade... WLAN doesn't works (since comm manager).

me too...any solution mods?

Same problem here... The default WM6 HTC comm manager is working corectly.

anyone have a cab file of the original? incase i want to revert back to it?

You might find the fix here:
http://forum.xda-developers.com/showthread.php?t=326655&highlight=wing+10+button

What's wrong with it?
I'd tried to install http://forum.xda-developers.com/attachment.php?attachmentid=48832&d=1188607222
And then, the following message: "Installation was unsuccessful. The program or setting cannot be installed because it does not have sufficient system p ermissions"
...
When I try to do the change in registry, a new surprise: in the registry tree, after CommManager doesn't exist "WLAN", but numbers (0,1,2,3... and in 3 there's WLAN). The change in registry: NOT WORK YET!

I've found the problem (maybe...). In folder "Connections" there's not Wi-Fi icon... what it means?

pichetinhas said:
What's wrong with it?
I'd tried to install http://forum.xda-developers.com/attachment.php?attachmentid=48832&d=1188607222
And then, the following message: "Installation was unsuccessful. The program or setting cannot be installed because it does not have sufficient system p ermissions"
...
(
Click to expand...
Click to collapse
SAME THING HERE! No permission to do this! I hope this does not result in a hard reset.

OK, I finally got anew one installed. Even though I tried a fresh install after a reboot, I still couldnt get it installed. So, what I did was start commmanager, Bthen stop it in Settings > Memory > Active programs

REALLY A GENIE!!! I'll try it...

It's Ok! Now, I could installed the comm manager, but it doesn't work... What I must fix exactly?
This is exactly what I did:
- Step 1: Copy to the phone and run it.
- Step 2: (Fixing WLAN button malfunction, somehow it doesn’t work by default on Wing): **Thanks for beowulf6’s post for this fix.
Change "HKEY_LOCAL_MACHINE \SOFTWARE \HTC \CommManager \WLAN= "Windows WLanMgr.exe " "DeviceName" = "{98C5250D-C29A-4985-AE5F-AFE5367E5006} TNETW12345"
the end of this long String is the WLAN-Adaptername of the Device.
just change in this Example "TNETW12345" into "TNETWLN1"
-Step 3: (Fixing Wi-Fi setting launch issue) **Thanks for phatman81’s post for this fix.
Change "HKEY_LOCAL_MACHINE\SOFTWARE\HTC\CommManager\WLAN\ Default:"
\Windows\WlanMgr.exe --> \Windows\ctlpnl.exe
After all this... The WLAN icon is always off...
Nobody else has the same problem? It's incredible!! I begin to think that I've done something wrong. It has began after the upgrade to WM6... Now, I can't downgrade to WM5 because I don't have the rom WM5 original... :'(

That CommManager dosen't seem to work well. I had problems with it. I found another one that DID work though.

grizzley said:
That CommManager dosen't seem to work well. I had problems with it. I found another one that DID work though.
Click to expand...
Click to collapse
hi, can you please point me to where you downloaded this??

hello
i have the same problem. wifi card not run.
the problem? http://forum.xda-developers.com/showthread.php?t=322225
i d´nt know.
anyone a idea? thanks

Do a search. You will find that you have to edit the settings in the registry for the comm manager.

I have this same problem. If anybody has a cab file of the stock tmo com manager, please post it!
Thanks in advance!

You guys...
Go into the registry and find out what the name is for the wireless adapter is. Take that information and change the adapter that is shown in the comm manager.
Thats really all there is to it.
If youre going to screw with the software, youre going to need to blood on your hands. You cant just throw stuff on the phones and expect it to work.

All right...
On my wing
\\\registry\HKLM\Software\HTC\CommManager\WLAN\<DeviceName>
{98C5250D-C29A-4985-AE5F-AFE5367E5006}\TNETTWLN1
That is the adapter for my phone, might be the same for you.
If youre using the changable comm manager you will have to change the settings for the wlan setup.
\\\registry\HKLM\Software\HTC\CommManager\WLAN\<Default>
\Windows\WrlsMgr.exe
Once again might be different for you.
Im using TouchIT 2.3 my stuff might be different.

I GOT IT
pichetinhas said:
It's Ok! Now, I could installed the comm manager, but it doesn't work... What I must fix exactly?
This is exactly what I did:
- Step 1: Copy to the phone and run it.
- Step 2: (Fixing WLAN button malfunction, somehow it doesn’t work by default on Wing): **Thanks for beowulf6’s post for this fix.
Change "HKEY_LOCAL_MACHINE \SOFTWARE \HTC \CommManager \WLAN= "Windows WLanMgr.exe " "DeviceName" = "{98C5250D-C29A-4985-AE5F-AFE5367E5006} TNETW12345"
the end of this long String is the WLAN-Adaptername of the Device.
just change in this Example "TNETW12345" into "TNETWLN1"
-Step 3: (Fixing Wi-Fi setting launch issue) **Thanks for phatman81’s post for this fix.
Change "HKEY_LOCAL_MACHINE\SOFTWARE\HTC\CommManager\WLAN\ Default:"
\Windows\WlanMgr.exe --> \Windows\ctlpnl.exe
After all this... The WLAN icon is always off...
Nobody else has the same problem? It's incredible!! I begin to think that I've done something wrong. It has began after the upgrade to WM6... Now, I can't downgrade to WM5 because I don't have the rom WM5 original... :'(
Click to expand...
Click to collapse
If u wanna know your adapter go to
HKLM\comm\tcpip\linkage
mine is SDIO86861 and in linkage folder it is shown ppp SDIO86861
Hope this info helps u

Registry settings - Access is Denied

I'm trying to change a few values in my registry in the "HKLM\Security" section and it keeps telling me Access is Denied. I know other people are doing it, so just wondering what you have to do in order to allow yuorself to change these values?
Thanks
Vodafone v1615 (HTC Kaiser) WM6

pdkellett said:
I'm trying to change a few values in my registry in the "HKLM\Security" section and it keeps telling me Access is Denied. I know other people are doing it, so just wondering what you have to do in order to allow yuorself to change these values?
Thanks
Vodafone v1615 (HTC Kaiser) WM6
Click to expand...
Click to collapse
You need to login as an administrator! J/K
What program are you using to edit the registry? And exactly what key are you editing?

u can use CeRegEditor

the link to that software is : http://ceregeditor.mdsoft.pl/ceregedit_setup.exe
More Info Here : http://forum.xda-developers.com/showthread.php?t=327511&highlight=CeRegeditor