Related
Hello,
today I get my HTC MTeoR.
For my Exchangeserversync I need to install a other root certificate.
But the Phone had a Applicationlock.
All known solutions for other HTC Phones don't work.
Have anybody a new solutions?
Regards
sotmysoft
I got the same problem, and after speeking with both the Danish & English HTC support, they both told me to wait for a rom upgrade or check for modification to "registration database". I have now looked through the whole internet and so far nobody seems to solved the problem.
So now i have HTC MTeoR as a brick, and a HTC TyTn send back because of problems with screen and keyboard !! Well done HTC !!
Peter
sotmysoft said:
Hello,
today I get my HTC MTeoR.
For my Exchangeserversync I need to install a other root certificate.
But the Phone had a Applicationlock.
All known solutions for other HTC Phones don't work.
Have anybody a new solutions?
Regards
sotmysoft
Click to expand...
Click to collapse
I have read somewhere that you need a special Regeditor which is recognised by the HTC and then change the following Key: HKLM/Security/policies/policies
00001017 from 128 to 144
That did the job on my QTEK 8500
...what does this policy do? Mine contains the value 148...
Have read the same on the net, but does not work on MTeoR.
Peter
Churchill said:
I have read somewhere that you need a special Regeditor which is recognised by the HTC and then change the following Key: HKLM/Security/policies/policies
00001017 from 128 to 144
That did the job on my QTEK 8500
Click to expand...
Click to collapse
I think it enables you to install a certificate
The reg hack that has worked previously for other WM5 devices doesnt work on the Mteor. In fact, you get a permisison denied error when trying to change the value.
Apparently HTC are working on a new ROM but can't give an ETA :evil:
What is this?
Has someone ever tried this registry editor?
It seems to work with MTeoR, but I don't have it yet...
ftp://xda:[email protected]/Uploads/Breeze/regeditSTG2.zip
I used the one called regeditSTG but I think it is the same thing...
My device is QTEK 8500 and the regeditSTG works on my device
Confirm that regeditSTG2 DOES unlock the Mteor, but the phone will not let you copy this app to the phone or to the card- so it has to be copied from a computer directly onto the storage card before using. Then it works!
Thanks guys, this is a real breakthrough
I have found another thing in the HKLM\security\policies\policies add the following DWORD "0000101b" value 1
I found it by Modaco. There this is a solutionif you get error 57 when running some software. BUT and this is big, when I added the value my TOMTOM received a new Device ID so it asks to activate and this being the second device that I activate I have to keep on changing the value to 0
Does anyone have for me maybe cracked version of Tomtom 5 mobile v5.20 for Windows smartphones with QVGA display (not symbian)
Solution i've found was posted by Pagemakers on the Expansys forums...
http://www.modaco.com/Mteor-application-unlock-solution-t244205.html
Tested and working. Allows you to import root cert and also the stops the insufficient permissions when installing software.
MTeor unlock
howdy,
does anybody know how to unlock HTC MTeor?
seems to me that the device is unable to edit the registry.
(I'm installing a root certificate)
already installed on Qtek 8310 and 8500 but the registry on MTeor is uneditable..
Any suggestions ?
Thanks
Here is most "official" way of application unlocking of virtually any HTC produced device: one third of unlocker is made by HTC and remaining two by M$
Unzip to device and run in numbered order. Then check incoming sms folder* for the status report. If report is negative then your rom have non-default privileged OEM cert, flashing to something more standard would solve the problem.
* it is not real sms, just system notification placed in sms folder (nothing is transmitted over radio) you can perform unlocking with phone turned off and sim card removed to be shure
I am running WM6, but my company implemented push email, and the device is now app unlocked after installing some certificates etc. I cannot run half of my programs - I tried the SDA-Application.exe program, which seemed to be succesful, but did not work. I cannot open a registry editor either.
I search all over this forum but cannot find the answer - how can I app unlock my wizard again?
We are also about to be issued HTC Touches which are similarly app locked, so it would be useful to have a method that worked for both!
Thanks
have you tried the lokiwiz and awizard apps?
rgs
No - these don't do certificate/application unlocking do they - I thought just CID/SIM locking?
PS I tried installing lokiwiz but I can't due to the app lock!
Both awizard and lokiwiz don't simply remove the Unsigned App Policies nor RAPI communication restrictions. What they need to work is for the phone to be in that state (app+rapi unlocked) and that's why there are some CAB that go along that are supposed to be run prior.
You can use my tool (WST - check signature) that does it with a click of a button
cheers
Great tool - didn't connect on Vista, connected on XP but says:
Not needed!
Regsitry settings are already set to use RAPI tools.
But I still cannot run unsigned apps! I have rebooted. I know they added a root and user certificate to the device - all apps have to be signed now.
Do you have any ideas?
Thanks
Sure, get yourself a registry editor and browse to HKEY_LOCAL_MACHINE\Security\Policies\Policies and edit two values:
:00001006=dword:1
:0000101a=dword:1
hope it does the trick
I tried mobile reg editor, which lets you edit the registry from a PC, and one of the reg keys was set to 0. But I changed it, rebooted, and same probem
hsclater said:
I tried mobile reg editor, which lets you edit the registry from a PC, and one of the reg keys was set to 0. But I changed it, rebooted, and same probem
Click to expand...
Click to collapse
Ok, looks like they changed some other settings that interfere with the permissions.
Check if HKEY_LOCAL_MACHINE\Security\CertMod\AllowUntrustedApps is set to DWORD: 1
Hang on I figured it out....the 00001006 key was for some reason not applied once I rebooted. Thanks for all the help!
For anyone needing to do the same - I had to download mobile registry editor from http://mobile-registry-editor.en.softonic.com/pocket as that allows you to edit keys from the PC without installing anything.
My new problem, is that on our touch/elf I cannot change this key with this program as it says access denied - so there must be some registry permissions on there.
hsclater said:
Yes that is set to 1. It should be right?
Click to expand...
Click to collapse
I pointed that because when i set it to 0 the phone refused to install apps so i thought it was the responsible registry value.
Must be another one then...
Thanks for all your help - my wizard is now sorted.
Any idea how they restricted the registry on a touch so I can't change that value?
hsclater said:
Thanks for all your help - my wizard is now sorted.
Any idea how they restricted the registry on a touch so I can't change that value?
Click to expand...
Click to collapse
I believe those settings are more related to WM6 than to the specific device so they should be the same.
btw, how did you sort it out? I'd like to know for future use
tx
Mine was just fixed by changing the 1006 value. The first time, the phone didn't take the change, but the second time it did and now works.
But the touch, it won't let me edit the registry remotely - access denied.
Cheers.
upload Cert_SPCS.cab to your phone and run it
PS:
sorry for asking but i didn't read your edit before
Hi guys,
I,ve just unlocked my 8125 , no problems a at all, sim and cid
Flashed it to Jaguar 4 ,
I had the registry tweaked before hant to allow acess to the MMS Server Tab , to allow me to change settings
but now after flash its locked/greayed out again , i cant find the post on how to tweak the registry again
Can anyone point me to it , please
Never mind, I found the post and reg edited it, no more issue
Hello, do you still have the link to the post? I have this problem myself but haven't found the post with the answer yet.
Thanks,
R.
In your registry goto:
HKLM/SOFTWARE/Arcsoft/ArcSoft MMS AU/Config/UI
There you will find a key called "EnableServerEdit" set it to 1 and you will be able to edit the server settings.
Hi! Anyone knows how to set Japan Softbank AP and MMS in Diamond?
thanks so much!
bza1231 said:
Hi! Anyone knows how to set Japan Softbank AP and MMS in Diamond?
thanks so much!
Click to expand...
Click to collapse
as for Softbank AP, read this thread to make it work. use the wifiwakediam.exe i patched for diamond instead of the original wifiwake.exe.
http://forum.xda-developers.com/showthread.php?t=298031
secondly, softbank mms is not compatible with other carriers. if you currently use mms with another carrier, your mms client does not work with softbank. you need to remove your current mms client out of your device, and install either mmslite or softbank mms client in x04ht. either way, you need to install japanese font since these programs run in japanese, not english.
read here about mmslite
http://forum.xda-developers.com/showthread.php?t=365760
X05HT Wifiwake
Could you be kind enough to modify the Wifiwake for a X05HT model?
Thanx in advance.
The phone with HARDSPL info is:
Cmd>getdevinfo
GetDevInfo: Get CID OK
HTCSRAPH1000HTCE
Cmd>info 2
HTCSSuperCID ﾔ鰤HTCE
qtotter said:
as for Softbank AP, read this thread to make it work. use the wifiwakediam.exe i patched for diamond instead of the original wifiwake.exe.
http://forum.xda-developers.com/showthread.php?t=298031
secondly, softbank mms is not compatible with other carriers. if you currently use mms with another carrier, your mms client does not work with softbank. you need to remove your current mms client out of your device, and install either mmslite or softbank mms client in x04ht. either way, you need to install japanese font since these programs run in japanese, not english.
read here about mmslite
http://forum.xda-developers.com/showthread.php?t=365760
Click to expand...
Click to collapse
s2k7 said:
Could you be kind enough to modify the Wifiwake for a X05HT model?
Thanx in advance.
The phone with HARDSPL info is:
Cmd>getdevinfo
GetDevInfo: Get CID OK
HTCSRAPH1000HTCE
Cmd>info 2
HTCSSuperCID ﾔ鰤HTCE
Click to expand...
Click to collapse
your phone has been suppercid. the orginal cid before cid-unlocking is needed to patch wifiwake.exe.
also, if you read japanese, visit this link.
http://d.hatena.ne.jp/chai99/20071008/1191839258
patching and signing wifiwake.exe is not that difficult.
sorry... solved it
Thanx.
Got the worked patch file.
http://forum.xda-developers.com/showthread.php?p=3077154
qtotter said:
your phone has been suppercid. the orginal cid before cid-unlocking is needed to patch wifiwake.exe.
also, if you read japanese, visit this link.
http://d.hatena.ne.jp/chai99/20071008/1191839258
patching and signing wifiwake.exe is not that difficult.
Click to expand...
Click to collapse
... still doesnt work for me
tried various settings for my diamond.
Can anyone affirm that I tried the right settings?
Im using a x04ht diamond with a german rom and try to get mmslite working since I dont want to install a japanese rom.
First I tried the settings on a different page... basically someone sum up the xda forum settings. (sorry dont have the link right now, but it was nearly the same as the others I tried.)
Now I tried this and it still doesnt work:
Uninstall MMSLite
Uninstall MMS Composer (you do not need this software at all)
Softreset
Delete all registry entries containing Arcsoft
Softreset
Create a new connection with the following information:
Name: MMS
Modem: Cellular Line (GPRS, 3G)
Access point name: mailwebservice.vodafone.ne.jp
User name: vodafonelive
Password: qceffknarlurqgbl
Install MMSLite (Build 301 for WM6.0, build 303 for 6.1)
Set up MMSLite options with the following information:
First tab: put a check next to MMS (this option allows you to choose the connection you use). Make no other changes to this first tab
Second tab: First two boxes should be http://mms, then 80. In the second two boxes input vfkkmmsproxy.vodafone.ne.jp, then 8080. Below the lowest box are three buttons. Press the furthest left button. A new window will pop up. In the top box input V904SH. In the bottom input Vodafone/1.0/V904SH/SHJ001 Browser/VF-NetFront/3.3 Profile/MIDP-2.0 Configuration/CLDC-1.1
Third tab: Check the first box.
Click ok. You should be able to send and receive. Send an email to yourself to be sure.
Click to expand...
Click to collapse
I can receive Mails afterwards, but when I try to send one all I get is a message in Japanese that it couldn't be send (retry yes/no).
It almost seems that my phone is not able to connect to the softbank network. (I quadro checked the connection settings now....)
Thanks in advance
Sebaschan
Hi All,
I found a solution, how BlacKberry connect can run under WM6.5 on Raphael.
Here it is:
Change device ID, from Start -> Settings -> System -> About -> Device ID to TouchPro
3. Install a registry editor, then edit
HKLM\System\Versions\AKU key, change whatever in there (like .0.0.3) to .1.6.0
4. Install BBConnect 4.0.0.103.
5. Setup with Blacberry Desktop software.
Hope this is helpfull.
Cheers,
Zsocee
quick question changing the device id wont mess with any installed programs that use the device name for registration keys will it?
and can anyone else verify this works?
freekquency said:
quick question changing the device id wont mess with any installed programs that use the device name for registration keys will it?
and can anyone else verify this works?
Click to expand...
Click to collapse
It will certainly, if you have programs installed which use the ID for their registration.
But I doubt that the device ID need to be changed to make that go. Changing the AKU version in the registry was since ever the trick to make BBConnect working on older devices. I think this is the only requirement.
Thanks Zsocee, I will try that.
freekquency said:
quick question changing the device id wont mess with any installed programs that use the device name for registration keys will it?
and can anyone else verify this works?
Click to expand...
Click to collapse
Hi,
I have tried with couple of 6.5 ROMs, and worked well.
Pls report if this is not working for you.
Cheers,
Zsocee
I've tried this trick only come to find out that when I change the device ID to TouchPro it changes the keyboard mapping. Also I tried just to change the AKU but that didn't help. Been using DA_G roms.
Has already been discussed here
http://forum.xda-developers.com/showthread.php?t=510461
Zsocee said:
Hi All,
I found a solution, how BlacKberry connect can run under WM6.5 on Raphael.
Here it is:
Change device ID, from Start -> Settings -> System -> About -> Device ID to TouchPro
3. Install a registry editor, then edit
HKLM\System\Versions\AKU key, change whatever in there (like .0.0.3) to .1.6.0
4. Install BBConnect 4.0.0.103.
5. Setup with Blacberry Desktop software.
Hope this is helpfull.
Cheers,
Zsocee
Click to expand...
Click to collapse
Does this only work with BES accounts or does it work with BIS accounts also?
Zsocee said:
Hi All,
I found a solution, how BlacKberry connect can run under WM6.5 on Raphael.
Here it is:
Change device ID, from Start -> Settings -> System -> About -> Device ID to TouchPro
3. Install a registry editor, then edit
HKLM\System\Versions\AKU key, change whatever in there (like .0.0.3) to .1.6.0
4. Install BBConnect 4.0.0.103.
5. Setup with Blacberry Desktop software.
Hope this is helpfull.
Cheers,
Zsocee
Click to expand...
Click to collapse
Hi Zsocee,
Thanks for your brilliant tip. I have tried the registry change on my Diamond, WM6.5, TF3D2, Rhodium, BBConnect 4.0.0.106 and it works!!!! Big thanks
doctajay said:
Does this only work with BES accounts or does it work with BIS accounts also?
Click to expand...
Click to collapse
Hi,
to be honest I don't know I'm using BES.
Br,
Zsocee
Tried it exactly that way but how often do you get a "Security Service died unexpectedly!"?
Blackberry Connect on Tilt2
I tried setting the registry and ID setting but after running the Blackberry Connect Desktop application it didn't install on my Tilt2. It did install on my desktop of course not where I needed it. It acted like my Tilt2 wasn't even connected via Activesync.
Zsocee said:
Hi All,
I found a solution, how BlacKberry connect can run under WM6.5 on Raphael.
Here it is:
Change device ID, from Start -> Settings -> System -> About -> Device ID to TouchPro
3. Install a registry editor, then edit
HKLM\System\Versions\AKU key, change whatever in there (like .0.0.3) to .1.6.0
4. Install BBConnect 4.0.0.103.
5. Setup with Blacberry Desktop software.
Hope this is helpfull.
Cheers,
Zsocee
Click to expand...
Click to collapse
works like a gem thanks i use bb connect 4.0.0.106 still works