How to set Japan Softbank AP? - Touch Diamond, MDA Compact IV General

Hi! Anyone knows how to set Japan Softbank AP and MMS in Diamond?
thanks so much!

bza1231 said:
Hi! Anyone knows how to set Japan Softbank AP and MMS in Diamond?
thanks so much!
Click to expand...
Click to collapse
as for Softbank AP, read this thread to make it work. use the wifiwakediam.exe i patched for diamond instead of the original wifiwake.exe.
http://forum.xda-developers.com/showthread.php?t=298031
secondly, softbank mms is not compatible with other carriers. if you currently use mms with another carrier, your mms client does not work with softbank. you need to remove your current mms client out of your device, and install either mmslite or softbank mms client in x04ht. either way, you need to install japanese font since these programs run in japanese, not english.
read here about mmslite
http://forum.xda-developers.com/showthread.php?t=365760

X05HT Wifiwake
Could you be kind enough to modify the Wifiwake for a X05HT model?
Thanx in advance.
The phone with HARDSPL info is:
Cmd>getdevinfo
GetDevInfo: Get CID OK
HTCSRAPH1000HTCE
Cmd>info 2
HTCSSuperCIDヤ鰤HTCE
qtotter said:
as for Softbank AP, read this thread to make it work. use the wifiwakediam.exe i patched for diamond instead of the original wifiwake.exe.
http://forum.xda-developers.com/showthread.php?t=298031
secondly, softbank mms is not compatible with other carriers. if you currently use mms with another carrier, your mms client does not work with softbank. you need to remove your current mms client out of your device, and install either mmslite or softbank mms client in x04ht. either way, you need to install japanese font since these programs run in japanese, not english.
read here about mmslite
http://forum.xda-developers.com/showthread.php?t=365760
Click to expand...
Click to collapse

s2k7 said:
Could you be kind enough to modify the Wifiwake for a X05HT model?
Thanx in advance.
The phone with HARDSPL info is:
Cmd>getdevinfo
GetDevInfo: Get CID OK
HTCSRAPH1000HTCE
Cmd>info 2
HTCSSuperCIDヤ鰤HTCE
Click to expand...
Click to collapse
your phone has been suppercid. the orginal cid before cid-unlocking is needed to patch wifiwake.exe.
also, if you read japanese, visit this link.
http://d.hatena.ne.jp/chai99/20071008/1191839258
patching and signing wifiwake.exe is not that difficult.

sorry... solved it

Thanx.
Got the worked patch file.
http://forum.xda-developers.com/showthread.php?p=3077154
qtotter said:
your phone has been suppercid. the orginal cid before cid-unlocking is needed to patch wifiwake.exe.
also, if you read japanese, visit this link.
http://d.hatena.ne.jp/chai99/20071008/1191839258
patching and signing wifiwake.exe is not that difficult.
Click to expand...
Click to collapse

... still doesnt work for me
tried various settings for my diamond.
Can anyone affirm that I tried the right settings?
Im using a x04ht diamond with a german rom and try to get mmslite working since I dont want to install a japanese rom.
First I tried the settings on a different page... basically someone sum up the xda forum settings. (sorry dont have the link right now, but it was nearly the same as the others I tried.)
Now I tried this and it still doesnt work:
Uninstall MMSLite
Uninstall MMS Composer (you do not need this software at all)
Softreset
Delete all registry entries containing Arcsoft
Softreset
Create a new connection with the following information:
Name: MMS
Modem: Cellular Line (GPRS, 3G)
Access point name: mailwebservice.vodafone.ne.jp
User name: vodafonelive
Password: qceffknarlurqgbl
Install MMSLite (Build 301 for WM6.0, build 303 for 6.1)
Set up MMSLite options with the following information:
First tab: put a check next to MMS (this option allows you to choose the connection you use). Make no other changes to this first tab
Second tab: First two boxes should be http://mms, then 80. In the second two boxes input vfkkmmsproxy.vodafone.ne.jp, then 8080. Below the lowest box are three buttons. Press the furthest left button. A new window will pop up. In the top box input V904SH. In the bottom input Vodafone/1.0/V904SH/SHJ001 Browser/VF-NetFront/3.3 Profile/MIDP-2.0 Configuration/CLDC-1.1
Third tab: Check the first box.
Click ok. You should be able to send and receive. Send an email to yourself to be sure.
Click to expand...
Click to collapse
I can receive Mails afterwards, but when I try to send one all I get is a message in Japanese that it couldn't be send (retry yes/no).
It almost seems that my phone is not able to connect to the softbank network. (I quadro checked the connection settings now....)
Thanks in advance
Sebaschan

Related

Orange gprs and mms settings for mini s

Hi,
Does anybody know these settings for the xda mini s?
Really need them!
Thanks.
You need the .cab file (Operator settings)
club i-mate has all operator settings in .cab format (copy to memory card and run it!).
But if you don't have access to their site, either search these forums for a .cab file (Orange operator settings) or contact Orange themselves (whilst they may be reluctant at first, their technical support guys will guide you through the settings or send them to you in txt format via e-mail and you can input them manually).
Hope this helps. Worked for me with o2. 8)
If anyone already has this cab file, would you mind uploading it for those who need it or pint them in the direction of a download link? Thanks.

XDA Mini S ROM update

Hi
Am newbie to the whole XDA thing (am just converting from BB), have managed to unlock my XDA Mini S and tried running K-JAM_WWE_216901_2169101_020721_ship.exe as i heard this would reflash the ROM to the latest (a friend of mine gave me this copy).
Got an error during this, and wondered if there was a specific XDA Mini S version (have searched on the site and it appears that there is on ftp://ftp.xda-developers.com/Wizard) and there are many different ROMS under the ROM directory, but i am unable to login to this site.
Am i just being thick here.
Any help gretaly appreciated.
That ROM upgrade worked ok on my xda-mini-s
When I upgraded my ROM I done the following.....
#unlock phone
with no SIM card in phone
copy EnableRapi.cab to phone
run EnableRapi.cab from phone
run lokiwiz.bat from PC
select option 'U' Unlock SIM
phone reboots
add SIM to backout bin file names on PC
run lokiwiz.bat from PC
select option 'C' unlock CID
phone reboots
add CID to backout bin file names on PC
#install new ROM
uncomress ROM file from zip
click ROM install file
follow instruction
takes 10 minutes
phone reboots
Hope this helps
Bilbo,
Hi. I ran through what you put but my Mini S does not auto reboot. I'm not sure the exact definition of a soft reboot is? - Put the stylus in the side or hold the power button for a few seconds?
Either way I cannot get the new KJAM rom on as invalid vendor ID is haunting me.
Any help would be appreciated.
Thank You
Ben
Dudes - I've done the same upgrade to my mini S. Not sure if it's worth the bother. No difference in speed/performance and my keyboard shifted symbols (@?£$) are out of sync. I think I'll go back to the Mini S rom without the customised stuff.
LLcoolJ:
I noticed lots of difference, speed and battery life.
To get the keyboard from US to UK symbols use the following:
Here are the registry changes ....
Keyboard language
Registry: HKCU\ControlPanel\Keybd
Key: Locale (string)
Value: 0809 English UK
0409 English US
0407 German
0419 Russian
040C French
0410 Italian
040A Spanish
benih007 said:
Bilbo,
Hi. I ran through what you put but my Mini S does not auto reboot. I'm not sure the exact definition of a soft reboot is? - Put the stylus in the side or hold the power button for a few seconds?
Either way I cannot get the new KJAM rom on as invalid vendor ID is haunting me.
Any help would be appreciated.
Thank You
Ben
Click to expand...
Click to collapse
The invalid vendor ID is the result of the ROM update..... to get rid of it make sure you run :
run lokiwiz.bat from PC
select option 'U' Unlock SIM
phone reboots
add SIM to backout bin file names on PC
A soft reboot is when you hit the reset button on the right hand side, its like rebooting a PC. A hard reset however is a re-install boot where you loose everything and the ROM is re-installed.
Cheers Bilbo - I've made the changes to the registry and the keyboard talks like me. Your right about battery power as well.
Bilbo.
Thank you for replying and helping.
Let me just go over what you said...
first I ran the loki cab file on the mini S.
run lokiwiz.bat from PC -- done.
select option 'U' Unlock SIM -- done (with sim card removed)
phone reboots -- not automatically though, but I will reboot it after the lokiwiz.bat finishes
add SIM to backout bin file names on PC -- what does this mean? this is not in the lokiwiz instructions and this is where i'm going wrong. Where is the bin file created btw, I can never find it?
I have tried so many combinations i'm starting to lose hope.
If you can help to get this damn thing working I promise to make a donation to this web site.
Thanks for all the good work.
Ben
i managed to get the unlock, but did not do the CID (so will try that).
So once i have done that will the K-JAM_WWE_216901_2169101_020721_ship.exe upgrade work?
Here's how I got mine working. - Remove the Sim card. Make sure you use Lockwiz02b. Select U to unlock from the options menu. The mini S should reboot automatically. Leave the device alone until its functional again and then start Lockwiz02b again. Select C (CID unlock) from the menu. It should reboot again and close down the Lockwiz box. The mini S should now be ready for a rom upgrade. On my first attempt I used the original Lockwiz prog which caused problems for me.
I'm about to do my rom update on my mini s....but this thread is so confusing!
Is there a step by step guide somewhere on the forum???
ROM Upgrade
Upgraded O2 XDA mini without any real problems:
I used the aWizard 1.3 Beta 2 tool which allowed me to carry out the CID Unlock and was pretty easy to understand. What it did not do was pick up the ROM from the rom folder but once I had completed the CID unlock I ran the rom normally and all was well.
So in essence: Connect Mini to PC via Activesync
Run the aWizard Bat file enabling RAPI (This is used to communicate with your XDA once it has done using Activesync). Then select the Unlock CID option. Once completed I then exited the wizard and followed the instructions as part of the rom upgrade and all worked well no hitches except the one mentioned above about the keyboard (now I have to find out how to modify the registry).
So what I used: aWizard 1.3 Beta 2 and QTEK Rom 2.17
186504-ruu_9100_2170702_21707102_20710_qtek_wwe_ship.exe
Mystery Solved!!!!
I finally figured out why its not working....
When I downloaded the loki zip file I opened it up in winzip and dragged the contents to a folder I created. Ran the batch file eveything seemed ok and the unlocker said it unlocked the device.
I have now realised that you have extract the files from the loki zip file and use the folder structure. If you don't, the utils directory is not created and the loki.bat cannot reference some files.
Found the answer on page 12/13 of the loki thread.
Thanks All
Ben
After doing the CID unlock the ROM install worked fine.
Just having the keyboard issue at the moment with symbols, went to:
Registry: HKCU\ControlPanel\Keybd
Key: Locale (string)
Value: 0809 English UK
but could not find the locale key to set to UK?
All i see is:
DefaultKeyLock
InitialDelay
MuteSwitch
RepeatRate
ShowWarningMsg
Am i looking in the right place or do i have to add this in (if so how)?
Cheers
Youv'e got to create a new registry key. Assuming you've got a registry editor. Go to HKEY_CURRENT_USER / Control Panel / Keybd.
Then create a new string value. Name it Locale and give it a value of 0809 for UK. Then reboot.
Just went in a created the new reg key as you mentioned.
Rebooted and it worked.
Many thanks for all your help on this, it is most appreciated.
I am now the converted!!!
So to sum up for anybody else:
Bought XDA Mini S from 02
use Lockwiz02b
Select U to unlock from the options menu
The mini S should reboot automatically
Start Lockwiz02b again
Select C (CID unlock) from the menu
It should reboot again and close down the Lockwiz box
The mini S should now be ready for a rom upgrade.
Then run
K-JAM_WWE_216901_2169101_020721_ship.exe
follow usual prompts.
Once phone is up and running, get a reg edit tool (i used PHMregedit) as the keyboard for a couple of the symbols is out of synch (think it is US style).
Using regedit tool
Go to HKEY_CURRENT_USER / Control Panel / Keybd
Then create a new string value
Name it Locale and give it a value of 0809 for UK
Then reboot.
Mini XDA should now work fine.
I have found that the new push technology for email is faster than Blackberry and more usueful.
Hope this is helpful to others.
Cheers great forum
quick question...
i am fed up with waiting for o2 to release their latest ROM so i am going to take the plunge with this ROM instead, my question is do i have to make any special changes once installed to make it work with O2 UK i.e. mms settings, GPRS settings etc.?
Also i noticed somebody has put together a T-Mobile USA customised ROM any chance that somebody will do this for O2 UK?
hyettd said:
Just went in a created the new reg key as you mentioned.
Rebooted and it worked.
Many thanks for all your help on this, it is most appreciated.
I am now the converted!!!
So to sum up for anybody else:
Bought XDA Mini S from 02
use Lockwiz02b
Select U to unlock from the options menu
The mini S should reboot automatically
Start Lockwiz02b again
Select C (CID unlock) from the menu
It should reboot again and close down the Lockwiz box
The mini S should now be ready for a rom upgrade.
Then run
K-JAM_WWE_216901_2169101_020721_ship.exe
follow usual prompts.
Once phone is up and running, get a reg edit tool (i used PHMregedit) as the keyboard for a couple of the symbols is out of synch (think it is US style).
Using regedit tool
Go to HKEY_CURRENT_USER / Control Panel / Keybd
Then create a new string value
Name it Locale and give it a value of 0809 for UK
Then reboot.
Mini XDA should now work fine.
I have found that the new push technology for email is faster than Blackberry and more usueful.
Hope this is helpful to others.
Cheers great forum
Click to expand...
Click to collapse
The Problem im having here is that once i have created the registry key, it deletes after a reboot. Is there something else i need to unlock to allow writing to the registry?
New Roms
Hi there - I'm sure this is your answer - I have read this on many forums.
WM05 takes a while to store the registry updates after you exit your editor. Make the registry change and wait a minute or so before performing the soft reset.
Hope this helps - we have all fell for this "improvement" to WM5 from the boys at MS.
Regards,
Chris.
:lol:
Thanks Bilbo . . . Spot on. First time to all this and followed it a treat
Thanks All

Registry settings - Access is Denied

I'm trying to change a few values in my registry in the "HKLM\Security" section and it keeps telling me Access is Denied. I know other people are doing it, so just wondering what you have to do in order to allow yuorself to change these values?
Thanks
Vodafone v1615 (HTC Kaiser) WM6
pdkellett said:
I'm trying to change a few values in my registry in the "HKLM\Security" section and it keeps telling me Access is Denied. I know other people are doing it, so just wondering what you have to do in order to allow yuorself to change these values?
Thanks
Vodafone v1615 (HTC Kaiser) WM6
Click to expand...
Click to collapse
You need to login as an administrator! J/K
What program are you using to edit the registry? And exactly what key are you editing?
u can use CeRegEditor
the link to that software is : http://ceregeditor.mdsoft.pl/ceregedit_setup.exe
More Info Here : http://forum.xda-developers.com/showthread.php?t=327511&highlight=CeRegeditor

Avaya One-X v4.0.25 installed and working !

Installed and working on Kaiser WM6 !
Manual install process :
1. Unpack the attached ZIP file with subfolders.
2. Copy all the files to the appropriate folders on your PDA.
3. Change the registry according to the attached registry.txt (change 2 keys and create 4 new)
4. Completely turn off your PDA (to renew the registry). Reset button does not work.
5. Switch the device on.
6. In order to enter the PIN code do: Start -> Settings -> Phone -> Enter your PIN
Now you have an Avaya One-X as a dialer.
Do not forget to fill settings.ini with your own settings.
Enjoy !
baudy2 said:
Installed and working on Kaiser WM6 !
Manual install process :
1. Unpack the attached ZIP file with subfolders.
2. Copy all the files to the appropriate folders on your PDA.
3. Change the registry according to the attached registry.txt (change 2 keys and create 4 new)
4. Completely turn off your PDA (to renew the registry). Reset button does not work.
5. Switch the device on.
6. In order to enter the PIN code do: Start -> Settings -> Phone -> Enter your PIN
Now you have an Avaya One-X as a dialer.
Do not forget to fill settings.ini with your own settings.
Enjoy !
Click to expand...
Click to collapse
What is it? A phone dialer??? I've never heard of it before. Any screenshot?
Can you provide any screenshots???
It looks like a VOIP client
http://www1.avaya.com/campaign/demo/one-x/index.html
could you please provide more info on Avaya one-x? what are the benefits of running this?
thanks!
I believe you need an Avaya VoIP system to get the one x client to work. I know they had a version for thier IP Office system but I don't think they ever updated it to run on WM6
Guys,
This is an application for WM which replaces the standard phone dialer and in addition to regular WM phone functionality it allows:
1. Manage your desktop office phone directly from your mobile
2. Make all operations like call forwarding, EC500 management, etc directly from your mobile.
It requires to have an Avaya VOIP PBX installed at your office.
Without it, it does not make sense at all.
Hi
We have an Avaya VOIP PBX installed at our office..
Could please tell us to connect HTC Touch Cruise wm6!
We have tried everyway we could, and read every document available on avaya support page, with no luck.
thank you in advance.
sortlaih said:
Hi
We have an Avaya VOIP PBX installed at our office..
Could please tell us to connect HTC Touch Cruise wm6!
We have tried everyway we could, and read every document available on avaya support page, with no luck.
thank you in advance.
Click to expand...
Click to collapse
Look on Avaya's website and see if thy have the client available to dowload. Last time I checked it was for WM 2003.

[THE]Blacberry WM6.5

Hi All,
I found a solution, how BlacKberry connect can run under WM6.5 on Raphael.
Here it is:
Change device ID, from Start -> Settings -> System -> About -> Device ID to TouchPro
3. Install a registry editor, then edit
HKLM\System\Versions\AKU key, change whatever in there (like .0.0.3) to .1.6.0
4. Install BBConnect 4.0.0.103.
5. Setup with Blacberry Desktop software.
Hope this is helpfull.
Cheers,
Zsocee
quick question changing the device id wont mess with any installed programs that use the device name for registration keys will it?
and can anyone else verify this works?
freekquency said:
quick question changing the device id wont mess with any installed programs that use the device name for registration keys will it?
and can anyone else verify this works?
Click to expand...
Click to collapse
It will certainly, if you have programs installed which use the ID for their registration.
But I doubt that the device ID need to be changed to make that go. Changing the AKU version in the registry was since ever the trick to make BBConnect working on older devices. I think this is the only requirement.
Thanks Zsocee, I will try that.
freekquency said:
quick question changing the device id wont mess with any installed programs that use the device name for registration keys will it?
and can anyone else verify this works?
Click to expand...
Click to collapse
Hi,
I have tried with couple of 6.5 ROMs, and worked well.
Pls report if this is not working for you.
Cheers,
Zsocee
I've tried this trick only come to find out that when I change the device ID to TouchPro it changes the keyboard mapping. Also I tried just to change the AKU but that didn't help. Been using DA_G roms.
Has already been discussed here
http://forum.xda-developers.com/showthread.php?t=510461
Zsocee said:
Hi All,
I found a solution, how BlacKberry connect can run under WM6.5 on Raphael.
Here it is:
Change device ID, from Start -> Settings -> System -> About -> Device ID to TouchPro
3. Install a registry editor, then edit
HKLM\System\Versions\AKU key, change whatever in there (like .0.0.3) to .1.6.0
4. Install BBConnect 4.0.0.103.
5. Setup with Blacberry Desktop software.
Hope this is helpfull.
Cheers,
Zsocee
Click to expand...
Click to collapse
Does this only work with BES accounts or does it work with BIS accounts also?
Zsocee said:
Hi All,
I found a solution, how BlacKberry connect can run under WM6.5 on Raphael.
Here it is:
Change device ID, from Start -> Settings -> System -> About -> Device ID to TouchPro
3. Install a registry editor, then edit
HKLM\System\Versions\AKU key, change whatever in there (like .0.0.3) to .1.6.0
4. Install BBConnect 4.0.0.103.
5. Setup with Blacberry Desktop software.
Hope this is helpfull.
Cheers,
Zsocee
Click to expand...
Click to collapse
Hi Zsocee,
Thanks for your brilliant tip. I have tried the registry change on my Diamond, WM6.5, TF3D2, Rhodium, BBConnect 4.0.0.106 and it works!!!! Big thanks
doctajay said:
Does this only work with BES accounts or does it work with BIS accounts also?
Click to expand...
Click to collapse
Hi,
to be honest I don't know I'm using BES.
Br,
Zsocee
Tried it exactly that way but how often do you get a "Security Service died unexpectedly!"?
Blackberry Connect on Tilt2
I tried setting the registry and ID setting but after running the Blackberry Connect Desktop application it didn't install on my Tilt2. It did install on my desktop of course not where I needed it. It acted like my Tilt2 wasn't even connected via Activesync.
Zsocee said:
Hi All,
I found a solution, how BlacKberry connect can run under WM6.5 on Raphael.
Here it is:
Change device ID, from Start -> Settings -> System -> About -> Device ID to TouchPro
3. Install a registry editor, then edit
HKLM\System\Versions\AKU key, change whatever in there (like .0.0.3) to .1.6.0
4. Install BBConnect 4.0.0.103.
5. Setup with Blacberry Desktop software.
Hope this is helpfull.
Cheers,
Zsocee
Click to expand...
Click to collapse
works like a gem thanks i use bb connect 4.0.0.106 still works

Categories

Resources