Database Develop

Really annoyed:

I purchased the motorola HS850 a couple of days ago, seems pretty good paired up sraight away.
Problems are as follows.
The BT headset can't be used as a microphone for recording your voice, and/or giving commands to Voice Command software!!! Also i cant work out what pressing the button once quickly when not on the phone does. On normal mobiles you can announce a voice tag and it will dial the number. On the PPC (XDAIIs) it changes the icon of just headphones next to the start menu to headphones with audio coming out. Any ideas what this does? seems to create a connection to the decice, but still does not pick up audio from the BT mic!! One last thing is, on normal mobiles the HS picks up button presses etc, throught the BT speaker. No it doesn't even do that with PPC WM2003SE!!!
So in short the unit is pretty useless apart from answering calls by tapping the button on the headset. Kind of defeats the idea of a Btooth headset. Surely you would want to dial out using its built in mic? Am i just been stupid here, or should any of the above work?
Any workarounds or software that will work with BT Headsets? If not does anyone want to buy this from me for a fair price??? I mean what is the point? Can people tell me there postive uses please, or explain what im doing wrong!!! Surely if a crappy £50 mobile can utilize the features a £250 ppc should be able to, i mean come on!!

Anyone? I'm sure someone out there knows a little more about this than me? Im after some info!!!

I guess the answer is to buy the one designed for the device from O2?

As far as i know from the research i have done, it doesn't matter what h/set you have got!!

Matt
You are unfortunately right that ypu cannot control Microsoft Voice or therefore autodial with ANY headset at present. This is apparently due to the Widcomm Stack implementation (They haven't coded that part yet!).
Most users will also have difficulty with (System) sounds from the IIs presented on the headset. I believe that the new High Quality Stereo Stack has now been implemented but works with only a few headsets.

Where can the new stack be found from? or is it the 3900 stack?

I was led to believe it is in the 3900 stack but there was a CAB file floating around a while back for it (Never tried it myself so can't be of much more help I'm afraid!)

Thanks bebbo, anyone got further information on this problem at all?> I would like to get to the bottom of it, as their are hundreds of these kinda posts around all with no definative answer....Come on lets solve this and put an end to peoples suffering..... (MINE TOO!! )
Anyway, please post any information you know!!

At this time there are NO headsets that provide this function that I am aware of. If you highlight a contact,you can push and hold the headset button until it beeps and it will dial that contact.I was considering switching to the Nokia 9500, but it does not have that function either.
Maybe in the future,but not right now........Later
mattwaddy said:
Thanks bebbo, anyone got further information on this problem at all?> I would like to get to the bottom of it, as their are hundreds of these kinda posts around all with no definative answer....Come on lets solve this and put an end to peoples suffering..... (MINE TOO!! )
Anyway, please post any information you know!!
Click to expand...
Click to collapse

Blue Angel - A2DP Bluetooth

Hi all
I have got Blue Angel:
ROM: 1.42.00 WWE
Radio: 1.13.00
BT: 3900
Last week I upgraded to the T-Movbile 1.42 Rom. I then installed the A2DP profile patch and was amazed that my Omiz OMS600 headphones were actually working using the high quality audio profile, and they were working very well.
The other day I did a hard reset to sort out a few things and left it at that. Later on when I came to reinstall my A2DP it wasn't working, nor was using the headphones as just a normal headset. I tried all sorts, including downgrading my ROM because at that point I was wondering whether or not it was actually on a previous version that I had it working.
Anyway... eventually I decided it was the headphones that had an error so emailed Omiz who were very helpful and sent me the download for their firmware flashing utility. This upgraded the ROM of my headphones from 1.06 to 1.25. I can now pair my headphones as a headset but not as High Quality Audio. I can get it to add a High Quality Audio shortcut in BT manager but when it trys to connect it says: "connection failed". Before it was also saying "service unavailable on device" or somthing similar.
Any assistance would be good.
Thanks a lot.

s_t_harvey said:
I then installed the A2DP profile patch and was amazed
Click to expand...
Click to collapse
Can you, please, tell me where to find this patch?
Someone knows if it works for wm5??
Thanks!

A2DP & WM5
Hi there,
I got the patch from: ftp://xda:[email protected] Upgrades/BT profiles for build 3500/
But I'm not sure if it will work on WM5, I think I have read that it will not, this is my main reason for not moving to WM5 yet... although at the moment while i can't get A2DP working I am not much better off.
How are you finding WM5? Is it reliable enough to compete with WM2003 yet, or is there still a bit of work needed?

It doesn't work under WM5. WM5 has a Microsoft bluetooth stack, this patch does not apply.
WM5 on the BA is quite stable if you have the time to work with it. I am not going back. If somebody comes up with a BT fix for the stand-by problem that does not drain the battery, all of my issues will be fixed.

A2DP on WM5
Thanks for that... I might consider upgrading one evening when I have nothing better to do!
Do you rekon we'll ever see A2DP on the MS bluetooth stack?

Re: A2DP on WM5
s_t_harvey said:
Thanks for that... I might consider upgrading one evening when I have nothing better to do!
Do you rekon we'll ever see A2DP on the MS bluetooth stack?
Click to expand...
Click to collapse
Yeah I think so. Apparently it's not out in the wild yet, but w/ BT 1.2, a lot of people will be looking to do more with it.

shuffle said:
WM5 has a Microsoft bluetooth stack, this patch does not apply.
Click to expand...
Click to collapse
Did you mean: "the mamaich rom has microsoft bluetooth stack". I really hope we can get WM5 with the same stack I had on w2003. (Broadcom, I think). Maybe it is out there but I can't see it...
shuffle said:
WM5 on the BA is quite stable if you have the time to work with it. I am not going back.
Click to expand...
Click to collapse
I agree. By the moment, I'm very pleased with the performance of WM5 on my BA. It actually runs faster than w2003! And I'm beeing very objective, believe me!
I'm having a big annoyance with writting (sms, word, etc) as the spelling isn't allways what I wrote. On the SMS window, it seems the screen gets redrawn all the time and it loose some words...
The other big is not having A2DP. I think is very frustrating having such a nice machine without a good software that makes all its goodness work! :?
Some delayings on the screen repainting and (I'm using Pocket Informant) slow performance on the everyday tasks as opening the contacts list, or changing toanother program, for example...
shuffle said:
If somebody comes up with a BT fix for the stand-by problem that does not drain the battery, all of my issues will be fixed.
Click to expand...
Click to collapse
What do you mean? To have the BT on a low-power mode more or less?
cheers...

looking 4 answers: ad2p & bluetooth & wm5
somebody with an answer to this theme?
WAS: ad2p & bluetooth & wm5
It is somehow possible?
Anybody there? :roll:

Answer is no, not possible yet.
And to the poster above - yes, just need the bluetooth connect issue solved where it drops connection when it goes into stand-by mode. The fix that drains the battery by keeping the unit out of standby mode really isn't a fix for me.
Not that I am complaining - I'm happy to be an early adopter along for the ride..

shuffle said:
Answer is no, not possible yet.
And to the poster above - yes, just need the bluetooth connect issue solved where it drops connection when it goes into stand-by mode. The fix that drains the battery by keeping the unit out of standby mode really isn't a fix for me.
Not that I am complaining - I'm happy to be an early adopter along for the ride..
Click to expand...
Click to collapse
some URLs????
Thanks!

How do I enable A2DP on my BA??
Hello!!
I have searched the forum many many times and visited wiki, but I could only find 2 threads which is close to what I need to know. This is 1 of them.
I have got Blue Angel:
ROM: 1.40.00 WWE
Radio: 1.12.00
BT: 3900
This configuration came from the recently rom upgrade from o2.
It seems to me that it's possible to enable A2DP on a BA running on WM2003 SE, which allows me to stream music to a bt headphones??
However I just could not find a thread which has an instruction on how to do it. Not even on wiki. After reading some threads, I came to my own conclusion that I need to upgrade me BT to build 3900 and install a patch??
So this was what I did,
Since my BT is already 3900 "offical" version, thus I didn't do anything to it.
I d/l this file BA_OEM_AudioGW (1.33g.00).CAB (83KB) and ran it on my PPC. I then got the audiogw.dll in my windows folder.
That was all I did. It didn't work of course. I have another file, BroadcomCorp_BT1.0.0.3900.cab but didn't use it as I'm already on 3900??
So I was just hoping that someone who has done it and was successful, could point me in the right direction!!! Thanks a lot!!!

anyone tried running both cab loacted at
ftp://ftp.xda-developers.com/BlueAn...age BT 1.0.0.3900 and audiogw.dll - 1.33g.00/
if it works, do let me know. I currently do not have a bluetooth headphones to test with.

I have Omiz headset (with MP3 and radio FM) and due to work with my Magician I had to manually change some registry entries. Point was that my PDA was not correctly identified as a A2DP device (only HF). I paired my PDA with normal BT dongle with A2DP profile, found registry entries with dongle mac adress and copied manually keys coressponding with a2dp service to folder with my headphones profiles. After all that it was possible to chose headphopnes in BT menager as stereo audio receiver.
Maybe its similar and u should look in registry...

jarekt, can you post those registryvalues please?!

Can't get streaming audio to BT headphones
I still have had no luck with the BA_OEM_AudioGW (1.33g 00) Cab or any registry settings under WM5.

BT a2dp WM5
have you tried the file (.cab) i uploaded in BlueAngel under uploads, it let me pair BT Stereo under wm5. Nevermind I looked someone deleted it dont know why. PM me and i can send if you want, I tried to reupload but Uploads appears broken.

I am on thesame situation of errorist.
My machine is on Broadcom 3900, and I want to make A2DP work.
If anyone can shed a light on how to make it work, I'd be very very grateful.
BTW, I have a Motorola HT820.
UPDATE:
I have installed the 3900 stack + audiogw dll even though I had a factory-installed 3900 stack, and I managed to connect in handsfree mode.
I still have not found out how to connect in A2DP mode though...
Any help is appreciated.

Hi All
I dont know how useful this is going to be, but i spent ages doing research to get my ht820 and my 02 xda 2s working properly, and when i did, i wrote a semi bad guide here
http://www.corecodec.com/index.php?option=com_smf&Itemid=29&expv=0&topic=2840.0
if its any use i'd be tempted to maybe write it up proper and put in in the wiki, either way, try some of the steps or files ive listed (most of them are from here)
but it gets it working with TCPMP aswell, which is a lot better than WM10 anyhow
good luck

BTW: ivans rom uses the broadcom stack, so the patch may work, however i dont have the headphones to test it with

i've onstalled this two cabs too, but new profile didn't appeared. Bay Be some registry values didn't appied? who did this patch?

A2DP skipping solution

Hi to all,
as pointed out many times in various XDA forums - there is a definite solution to the skipping problem with bluetooth stereo. The reason i post it again is that i never had the issue before, but it appeared with the latest ROMS 2.26 and beyond - probably due to more optimistic assumptions about the BT headset performances (i own a Jabra BT620S which i love, after i got rid of the Motorola HT820 because of terrific skipping that i could have probably solved!)
The solution:
set/change the registry BitPool (it is a DWORD in case you don't have it) by using TotalCommander or similar:
HKLM/SOFTWARE/Microsoft/Bluetooth/A2DP/Settings/BitPool=40
A value of 50 or so means heavy skipping, the lower it is the lower the bandwidth between your headset and the wizard. At 40, i can be the famous 10 m away without any skipping with a great audio quality. But at 50, i have essentially to keep the wizard nearby my ears....
Last comment on the quality: i don't notice any difference, probably because my WMA files are encoded at lower bandwidth anyway....BTW, MaxBitpool and SampleRate, experimentally, have no visible effect (probably depending onthe MS implementation of the BT stack).
All the precise information supporting this empirical evidence is available in (see for example pg. 22 and 71 for the bandwidth estimation)
http://www.bluetooth.com/NR/rdonlyres/800D10CD-DE3D-4D51-ABC0-726C8DF26151/921/A2DPspecv10.pdf
Enjoy the Wizard!

No Skipping at last.
It seems to work for me no skipping as long as I am not syning via bluetooth.
Thanks for posting this fix, as the skipping has been bothering me for a while.

I thought it was fixed
Sorry Buddy it still skips on me, do I have to reset the wiza after adding the registry setting?

wrongway2002 said:
Sorry Buddy it still skips on me, do I have to reset the wiza after adding the registry setting?
Click to expand...
Click to collapse
Absolutely yes, you have to soft reset your device (keep pressed the power button or use the stylus in the small hole on the right side).

I use resco registery editor and there is no file for settings or bitpool? I have cingular 8125 and jabra 620

same here, i have no settings/bitpool in my registry
i have hklm/software/ms/bt/a2dp/devices/1, 2, 3, 4
@pzucchel, which rom are you using?

bbobeckyj said:
same here, i have no settings/bitpool in my registry
i have hklm/software/ms/bt/a2dp/devices/1, 2, 3, 4
@pzucchel, which rom are you using?
Click to expand...
Click to collapse
And your roms are A2DP enabled? seems strange, though you could always add the settings, but God knows how many other keys you'll be missing.

masr1979 said:
And your roms are A2DP enabled? seems strange, though you could always add the settings, but God knows how many other keys you'll be missing.
Click to expand...
Click to collapse
I'm currently trying wm6 underground, in my first test the bt stereo semmed beetter than the others i tried - but i'll see how it survives the work commute today/
which are you using, my only requirements for a rom are -
1 working a2dp
2 fast i don't really care if vanilla or not

Just overclock mate!! No skipping at 260MHz

new2city said:
Just overclock mate!! No skipping at 260MHz
Click to expand...
Click to collapse
if only that worked
i am using phoneAlarm which seems to slow down every rom is use a lot, but overclocking does not work for me.
someone please tell me which rom they are using, that way i can try it, and if the sound still drops, i know it's my device/my loaded software

I'm using Core2.0 (as shown in my signature). But I got the hissing problem so I am using Axim Widcomm stack.. However, I still have to overclock to get rid of the skipping. The reason could be because I play aac+ files using TCPMP. I remember that there was no skipping in WM5 when I played MP3s.

bbobeckyj said:
I'm currently trying wm6 underground, in my first test the bt stereo semmed beetter than the others i tried - but i'll see how it survives the work commute today/
which are you using, my only requirements for a rom are -
1 working a2dp
2 fast i don't really care if vanilla or not
Click to expand...
Click to collapse
Well I'm using the stock T-Mobile now (I'm in between cooks, and messing around with the registry files, hopefully tomorrow I'll be flashing..... again) Have you tried Faria's roms? a2dp worked pretty well for me using an IOGear stereo headset. Skip's were far in between, that is if they were present at all; usually when I had a lot of apps running, or when the phone was connected or connecting to GPRS was the only way it would skip. Your milage may vary though, but it might be worth a shot.

so i flashed the core 2
edited the registry (set it to 20 hexadecimal, which gives 32 in brackets) (i really didn't find a2dp settings in any other rom i tried) and now it works, so thanks for all the help - it's easy when you have the right rom

I thought I would drop in my .02 cents. I have a Jabra 620 as well. I had previously used Molski 3.3 crossbow lookalike rom (WM5). With that one, auidio was good but was not in stereo.
Now today I had some free time so I decided to try a wm6 rom or 2. With Faria's rom, the sound quality was good. I think he sets the bitpool to 60. But the rom itself is buggy.
Next I tried crossbow reload 1.7. This rom is much less buggy. But the stereo bluetooth sucks. The sound quality is very tinny. Also, there is this constant background clanging that is very annoying. I have looked at the bitpool. Bitpool in reload is 30. I changed this to 60 but it may have only gotten slightly better. Sound quality still sucks. To note, I dont get any skipping, so Im happy about that.
EDIT: I decided to change the MaxBitPool value to greater than 30. At 35, all the clanging and general bad sound went away. I'm happy!

sorry for the missed replies!
....i have switched to the trinity due to a wizard failure!
...If you don't have the bitpool register, you should create it. And by the way, i had exactly the same problems with the trinity and the same jabra bt620s, and changing the bitpool value worked again!!!
all the best;
Piero

I now have the ingenetics rom dump flashed to my ppc (see my sig) and it is by far the best a2dp rom ever - without overclocking (i forgot to try it, so i'll be doing that soon, to see what improvements i can make)
pzucchel said:
....i have switched to the trinity due to a wizard failure!
Piero
Click to expand...
Click to collapse
OT - how is the trinity compared to a wiz? i asked in my local shop, but with all the rubbish from orange on it, it was actually a lot slower than my wiz. and they wouldn't even let me hard reset it and let me remove the extended rom they even said there was no other software to make it run faster! nor would i be able to remove the orange crp - funny how we know more about these things than the sellers

Thanks for this post. I know it's been a few months, but I just got myself a Jabra BT8010 and this change in the registry value made a difference in the audio quality. I don't have the drop outs I had with the other value. The problem I have now is that TCPMP doesn't play the video smoothly when using the headset despite overclocking. Any ideas to the setting that would help? Thanks.

Re Skipping
Hi All
I just got the 620,s , and Yes they sucked, found this fix , (post 1) tweaked my registry , soft reset......
And OH MY GOD !!!!!!!!
It works FLAWLESSLY,
hasent skipped now in 30 mins, walked away from phone 20 feet, not a skip in sight
You Guys , Totally Rock!!!
Kudos to the poster

A2DP in Touch-IT wm6.1 Black

First of all, I want to give a special thanks to itje for his worderful work making BEST rom for everyone.
I am using Touch-IT wm6.1 Black version but I have question with bluetooth headset setup activating A2DP. I have been searching all the posts and tried many things to my Wing and my bluetooth device (Samsung WEP200) but didn't help either didn't work any of them. How can I use my headset not just answering calls also listen to music & movie? Please help me..

choodyessas said:
First of all, I want to give a special thanks to itje for his worderful work making BEST rom for everyone.
I am using Touch-IT wm6.1 Black version but I have question with bluetooth headset setup activating A2DP. I have been searching all the posts and tried many things to my Wing and my bluetooth device (Samsung WEP200) but didn't help either didn't work any of them. How can I use my headset not just answering calls also listen to music & movie? Please help me..
Click to expand...
Click to collapse
Papamopps was asking this same question to me the other day....
I am trying to fix this one just keep coming back everyday for new posts.
Unless somebody else allready found the fix. Post this here. Thanks

mhhhh i will have a look at it....
... because after ayerthons workout for standy music.....
.... i bought a headset and 4gb sdhc card.
we´ll find a way for a2dp to work....

As I found in other threads and devices - try to use HTweakC for a2dp problems.
I also PM ithe that some cooks take 2 files from old ROM WM6 and replace the new files on WM6.1 with them - did teh trick for some...
or try this fix:
http://forum.xda-developers.com/showpost.php?p=1066713&postcount=1

Not sure if this is your problem or not, but to get music, GPS prompts, etc. from my Wing to my mono Bluetooth headset (Jabra250V), I used a utility called btaudio. Not sure at the moment where exactly it is located, I've seen it both as a .zip and a .cab file. A quick search should locate it along with more information.

choodyessas said:
First of all, I want to give a special thanks to itje for his worderful work making BEST rom for everyone.
I am using Touch-IT wm6.1 Black version but I have question with bluetooth headset setup activating A2DP. I have been searching all the posts and tried many things to my Wing and my bluetooth device (Samsung WEP200) but didn't help either didn't work any of them. How can I use my headset not just answering calls also listen to music & movie? Please help me..
Click to expand...
Click to collapse
hmm but wep200 is just not compatible with a2dp.. to use it to listen music you may use bluemusic, bt toggle or bt audio toggle (and im think there is a few more programs) but the quality is (i couldnt find a word) awful.
i didnt try a2dp on itje's roms but it works "out of box" on opentouch 3.0(same build) and pdaviet 6.1
im using motorola ht820 headset which ofcourse support a2dp.

marty123 said:
Not sure if this is your problem or not, but to get music, GPS prompts, etc. from my Wing to my mono Bluetooth headset (Jabra250V), I used a utility called btaudio. Not sure at the moment where exactly it is located, I've seen it both as a .zip and a .cab file. A quick search should locate it along with more information.
Click to expand...
Click to collapse
yes for mono ofcourse
BUT we are searching for the ability of using the built in A2DP - that is stereo sound and can only be used by stereoheadset...
thanks

papamopps said:
yes for mono ofcourse
BUT we are searching for the ability of using the built in A2DP - that is stereo sound and can only be used by stereoheadset...
thanks
Click to expand...
Click to collapse
I don't believe the title of this thread accurately describes the poster's problem, hence there are two trains of thought on the solution. The A2DP in Touch-IT wm6.1 Black is one issue, the other being getting the WEP200 headset to work with audio other than phone calls. As slimag posted, his headset is not compatible with A2DP, so any work along those lines will most likely NOT help choodyessas. I choose to try and help with their underlaying question.
choodyessas said:
First of all, I want to give a special thanks to itje for his worderful work making BEST rom for everyone.
I am using Touch-IT wm6.1 Black version but I have question with bluetooth headset setup activating A2DP. I have been searching all the posts and tried many things to my Wing and my bluetooth device (Samsung WEP200) but didn't help either didn't work any of them. How can I use my headset not just answering calls also listen to music & movie? Please help me..
Click to expand...
Click to collapse

Sorry if I confused you guys
marty123 said:
I don't believe the title of this thread accurately describes the poster's problem, hence there are two trains of thought on the solution. The A2DP in Touch-IT wm6.1 Black is one issue, the other being getting the WEP200 headset to work with audio other than phone calls. As slimag posted, his headset is not compatible with A2DP, so any work along those lines will most likely NOT help choodyessas. I choose to try and help with their underlaying question.
Click to expand...
Click to collapse
Sorry if I confused you guys but I believe my headset WEP200 works with A2DP because I tried on Open Touch wm6.1. I didn't set A2DP tho... I am not sure if the ROM cooked with it but it worked. The real problem is that I can not use Open Touch because my wing freezes ALL the time.. so I'm more into itje's ROMs..

So uhm.. sorry for not responding to the original TS - but am I to understand that there are bluetooth stereo issues with the 6.1 WM roms?
I bought a sony ericsson ds980 stereo bluetooth headset the other day. My phone is currently being repaired by HTC (at least, I hope it is) - I intend to flash Itje's latest wm6.1 ROM to it the second I have my mighty Herald returned to me.
But... WM6.1 doesn't work well with Stereo Bluetooth you say? Even with the suggested fixes in the posts above?

out of curiousity does anyone know the params that Battery status uses to launch A2DP? i want to make a shortcut, the tray launch is hard to hit sometimes,
and thanks for the fix

mapleman321 said:
out of curiousity does anyone know the params that Battery status uses to launch A2DP? i want to make a shortcut, the tray launch is hard to hit sometimes,
and thanks for the fix
Click to expand...
Click to collapse
which fix?
I only said let´s try this fix. I´ll get my headset during this week and i will try it.....

mapleman321 said:
out of curiousity does anyone know the params that Battery status uses to launch A2DP? i want to make a shortcut, the tray launch is hard to hit sometimes,
and thanks for the fix
Click to expand...
Click to collapse
try a2dptoggle (found on this forum) - it has todayplugin but can be used without it as a shortcut.

slimag said:
try a2dptoggle (found on this forum) - it has todayplugin but can be used without it as a shortcut.
Click to expand...
Click to collapse
here you go.....

NO probleme here.
Just got my Motorolla S9 (40€) paired it and started music with Audiomanager.
... pairing = no problem
... skipping music = no problem
... doing a call = no problem!
Great.... adn with the music in standby PERFECT!!!
Great.
Damn . i have to sent my XDA to service because of a LCD demage...
Now as I found the perfect setting....
Hahahahahaha
Indoor I can even go out of the room. And if I loose connection .... it pairs automaticly again when inside of range...
Great

papamopps said:
NO probleme here.
Just got my Motorolla S9 (40€) paired it and started music with Audiomanager.
... pairing = no problem
... skipping music = no problem
... doing a call = no problem!
Great.... adn with the music in standby PERFECT!!!
Great.
Damn . i have to sent my XDA to service because of a LCD demage...
Now as I found the perfect setting....
Hahahahahaha
Indoor I can even go out of the room. And if I loose connection .... it pairs automaticly again when inside of range...
Great
Click to expand...
Click to collapse
Awsome to hear this..Now I am going to stop my research. And start searching for another great TWEAK
And i think i'm going to buy a headset to

HD2 and sony erricson mw600 review

Hey guys, i`ve been browsing the site for a while and thought it about time to make an original contribution. I was looking for a blue tooth headset and my searches here lead me to the MW600. quite a few people were asking about it so i thought it a good opportunity to give my review now that i have one!
from the start then, i bought this as i have a very nice pair of headphones i wanted to use with the phone, but could not be doing with cords. most bluetooth headsets have their own headphones which i get along with even less. this seemed a perfect solution to both problems.
the box it comes in is flimsy at best, indeed the plastic tab to hang the box on is completely lose, useless for hanging up in a shop.
out the box, its a lot smaller than i imagined but a bit thicker too. it comes with a charger that handily also fits the HD2 which is an added bonus and un expected!
when i paired up to the phone i was very surprised to find that the unit displayed the song info correctly. i honestly did not expect this to work outside of a sony erricson phone but it works! the next track and previous track buttons work as well, as does the play and stop buttons.
the hands free works fine as well with the person who called me not knowing i was on a hands free.
the volume control is awful, they decided to use a slider that half the time does not register me raising the volume and when it does its impossible to get the right volume setup, its either too high or too low and the slider is too imprecise to get the setting i want!
I cannot comment on the enclosed head phones as i never used them!
When i play some music through the device ( and that is of course what its for) the results are slightly dispaointing. the sound is okay, but that is about as best as i can describe it. maybe its because i am spoilt by the good quality output from the 3.5mm jack on the phone, maybe i am just used to having some EQ on (which the unit does not provide for and the phone says it cannot apply `audio booser` without somer thing being plugged in the 3.5mm jack) but the bass is there (thanks on no small part to the ehadphones rather than the unit) but the mid seems `transparent` with no real hit and the highs are annoyingly 'sparkly'. This os of course my opinion, and others may find the output perfectly fine and for comparison i also do not like the output of ipods as i find their mid lacking as well so if your happy with i pod output you maybe happy with this units output,
I have never needed to re charge the unit yet after 3 days of having it and listing to it in the morning for 2 hours and on the way home for an hour so the battery seems quite good.
I love the unit but the quality of the output means i will only really use it when i have to, prefering to use the audio jack output, i am however going to look into how the unit works as i suspect the phone is sending SBD encode audio and not the native mp3. if i can ge tthe unit to decode MP3 and the phone to send mp3 then i think we have a winner!
For reference i used CD originals encoded to lame 3.98 -V1.

just ordered mine. thanks for the review. i will also post up my opinion of the headset when it arrives. if it is as good as the include wired version, that will be good enough for me.

Hey thanks for the review as I'm getting one but you didn't speak about the radio does it work? anything else? cheers mate

Thanks for your review.
But could you edit it so that it's not so hard to read?
Spaces between a few sentences would suffice.

Thanks for the review, install WOW SRS and it should improve the sound quality via bluetooth but it will kill audio booster when plugged with the 3.5mm jack and always use WOW SRS.

Vrery nice, all working apart from Cyberon voice dialer, you can initiate Cyberon voice application by clicking the phone button on headset but can't pass voice to the phone as it doesn't recognize voice. It looks like the problem relates to cyberon not mw600.

idonxda said:
Vrery nice, all working apart from Cyberon voice dialer, you can initiate Cyberon voice application by clicking the phone button on headset but can't pass voice to the phone as it doesn't recognize voice. It looks like the problem relates to cyberon not mw600.
Click to expand...
Click to collapse
It's a problem with the HD2 bluetooth stack. I managed to get it working with a new radio, a Miri ROM & a modified Cyberon cab

MrGubby said:
It's a problem with the HD2 bluetooth stack. I managed to get it working with a new radio, a Miri ROM & a modified Cyberon cab
Click to expand...
Click to collapse
Hi Thanks, can u plz tell me the version of radio and rom? i need everything to be working!

Anyone else had any experience of this device on HD2? Probably going to but one but would like more reviews before I do.

idonxda said:
Hi Thanks, can u plz tell me the version of radio and rom? i need everything to be working!
Click to expand...
Click to collapse
Hi, I'm using a Miri 6.5.x ROM version V.10 with Radio 2.08.50.08_2

MrGubby said:
Hi, I'm using a Miri 6.5.x ROM version V.10 with Radio 2.08.50.08_2
Click to expand...
Click to collapse
Hi i can not seem to find v10 only see 6.0 and 7.0 any chance of a quick tutorial aswell. Someone else installed duttys rom for me. Advise please as i would like to get this bluethooth button working with cyberion voice using Sony Erricson MW600 stero head set.
The links to the modifyed cabs also please.

badman112 said:
Hi i can not seem to find v10 only see 6.0 and 7.0 any chance of a quick tutorial aswell. Someone else installed duttys rom for me. Advise please as i would like to get this bluethooth button working with cyberion voice using Sony Erricson MW600 stero head set.
The links to the modifyed cabs also please.
Click to expand...
Click to collapse
The Miri V10 ROM is on the HTCpedia forums (I think it is V11 now, not tried it)

Just got mine, tried it and I have to say:
THE MUSIC QUALITY IS CRAP!!!!!

headphones arrived today. WOW. excellent audio and far better than oem headphones. have yet to play with it on radio etc, but so far very impressive.

I have a problem
After the end of any audio file
Lose "stereo audio" connection
and have to push the play button to reconnect "stereo audio"
and also
After the end of calls
Lose "Hands Free" connection
and have to push the Talk button to reconnect "Hands Free"
but if i received a call
"Hands Free" reconnect automatically
But there is a delay for two seconds
I do not know this is normal?
Like power autosaving!!!

this is definately not normal. mine works flawlessly. no need to reconnect ever. i would suggest checking your bluetooth settings and pairing settings again to make sure everything is correct.

I am using smartWatchM with Sony Ericsson MBW-150
I think there is a conflict between the Watch and mw600 connection

The problem is from latest windows build (23569) & (21903 )
When i go back to an old build like (23519)
There is no conflict between the Watch and mw600 connection
Waiting for a solution to this problem or update for Windows without problems

Delays
Does anyone else experience a 3-5 sec delay when the HD2 jumps 1 song/chapter forward?
My combination gives a this delay, which is especially annoying when listening to audiobooks!
I miss a few seconds of every new chapter, need to manually jump 1 chapter forward and the back again.
Does not appear when manually going forward/reverse only when HD2 is in control.