Blackberry connect email setup? - Tilt, TyTN II, MDA Vario III General

I have blackberry connect on my phone, but I can't seem to setup email. I have BIS plan and the setup email button is not lit up..
I've read somewhere that I have to provision my phone or something..
On the service is says Provisioning.. is it suppose to be saying that?
Do I have to plug my phone onto my PC to use blackberry connect? because I have hardware issues with my TyTN II.. so I am unable to connect.

anyone? help

ive never understoos why people want blackberry connect on an exchange capable device.
Is there any big difference betweem the two?

How To Enable BBC CONNECT TO THIS ROM
Install instructions:
1) goto hklm>system>versions and change what ever is there to .0.4.2 (The leading . before the 0 needs to be there)
2) Install bbconnect cab file.
3) If you don't get the check boxes at the end of the install (Calendar, notes, etc). Re-run the install (it will remove the 1st instance), I always get it the second time.
4) Wait for Blackberry to finish "setting up device for first use" and let it reboot.
5) On reboot, status will now show the PIN number.

austinsnyc said:
How To Enable BBC CONNECT TO THIS ROM
Install instructions:
1) goto hklm>system>versions and change what ever is there to .0.4.2 (The leading . before the 0 needs to be there)
Click to expand...
Click to collapse
It's already says .0.4.2 when I got there.

austinsnyc said:
5) On reboot, status will now show the PIN number.
Click to expand...
Click to collapse
I have the PIN # now.. all I need to know is how to setup email.. it won't let me press the setup email button

austinsnyc said:
How To Enable BBC CONNECT TO THIS ROM
Install instructions:
1) goto hklm>system>versions and change what ever is there to .0.4.2 (The leading . before the 0 needs to be there)
2) Install bbconnect cab file.
3) If you don't get the check boxes at the end of the install (Calendar, notes, etc). Re-run the install (it will remove the 1st instance), I always get it the second time.
4) Wait for Blackberry to finish "setting up device for first use" and let it reboot.
5) On reboot, status will now show the PIN number.
Click to expand...
Click to collapse
I have spent all day trying to get my o2 Stellar to give me a PIN...no luck. I have read a lot and i have reached the conclusion that what you write here is correct but does not work for me. Is it because o2 in the UK use different settings? I have also tried .0.4.4.
If anyone could help would be appreciated

YOU NEED TO DOWNLOAD Blackberry Connect Desktop to a computer on the company network, plug into USB & then select configure device.
The PIN is generated between the device & the network, your provider CANNOT give it to you.
Also, make sure you've registered with the network first, there is a button in BBC settings for that.

Related

PUG

Hi there sorry if this is the wrong section, but I was hoping Pug would be able to tell me how to upgrade my ROM, etc because I'am still using the original.
Also could someone be so kind as to list a tap by tap guide to setting up my XDA IIi to connect to O2 Active, and Mobile Web, as I have a pay as you go SIM card in the XDA IIi?
Thanks alot peeps.
rmurph17 said:
Hi there sorry if this is the wrong section, but I was hoping Pug would be able to tell me how to upgrade my ROM, etc because I'am still using the original.
Also could someone be so kind as to list a tap by tap guide to setting up my XDA IIi to connect to O2 Active, and Mobile Web, as I have a pay as you go SIM card in the XDA IIi?
Thanks alot peeps.
Click to expand...
Click to collapse
Hi, There is plenty in the Alpine sections about upgrading to the various ROM sections, just have a look or search. You will find the files here, ftp://xda:[email protected]/Uploads/Alpine/
You can see what PUG ROM version I use, which I have found to be very good.
Sometime ago I uploaded all the cab files for your Carrier Settings, just copy cab to XDA IIi and tap to run, after the cab has installed the settings, it will delete itself, so make sure you keep a copy for future use.
http://forum.xda-developers.com/viewtopic.php?t=26463
rmurph17 said:
Hi there sorry if this is the wrong section, but I was hoping Pug would be able to tell me how to upgrade my ROM, etc because I'am still using the original.
Also could someone be so kind as to list a tap by tap guide to setting up my XDA IIi to connect to O2 Active, and Mobile Web, as I have a pay as you go SIM card in the XDA IIi?
Thanks alot peeps.
Click to expand...
Click to collapse
The latest PUG upgrade is here, ftp://ftp.xda-developers.com/Uploads/Alpine/O2_Roms__Camera_Fixed_Pug
There are 2 files here, one has all the unneccessary 02 software outstripped and the other with all the 02 software included.
Once downloaded, extract to a folder on your desktop (or anywhere on your PC). Make sure your PDA is connected via the cradle and Activesync. Goto the folder you have extracted the files to on your PC, click to run MaUpgradeUt_noID.exe, just click OK, then you should see a message saying it is checking your Device, your devices screen should go blank (Although you will see some dark text including the word Serial on your PDA)
You should then get a screen saying what ROM version you have and the New version, press ok then a screen will pop up saying checking device, the common thing to happen here is it will stop in this screen, what 5 mins if it doesn't change then don't touch your PDA, CTRL-Alt-DEL on your PC keyboard to bring up Task Manager, select the Process Tab and look for the file name MaUpgradeUt_noID, highlight it with one click and then press End Process button, go back to the folder and run MaUpgradeUt_noID again follow the screen instructions again and then it will update this time, indicated by a install bar screen, it will take about 20mins to complete.
Once updated remove your PDA from its cradle and hold the Power Button down and at the same time press the softreset hole with your Stylus, this will Hard Reset (Factory Settings) your device, depending on the version you have installed follow instructions on the PDA, it will install some more files which take 5 to 10 mins to install. Thats it you device is now updated.
For your carrier settings goto http://forum.xda-developers.com/viewtopic.php?t=26463, there you will find the CAB files for your Phone Carrier (remember there is a file for PAYT and Contract for each Carrier, download the correct one for you), download the correct one for you and copy to your PDA, tap to run and your correct MMS/GPRS/WAP settings are then installed. Very Happy
**Please Note before you update your PDA. Please copy anything you want to keep on your PDA to your PC, don't worry about SD storage or the other Perminent Storage area as the update leaves these untouched. If you want to save your Contacts and or your Appointments and Tasks then goto Settings on your PDA select second Tab and then select Perminent Save, tick your selection and tap OK, then once you have carried out the update go back to Perminant Save and tick boxes you want restored and then tap OK, this function will dynamically keep your backup upto date, so you can use this anytime.
Phew, hope this helps.
I have tried all teh CAB files, and all the individual settings, to get full GPRS working on my O2 PAYT SIM.
After 2 emails to o2's technical department (which at least they answered within 24 hours) I was assured that the reason I couldnt connect is the APN whould be set to mobile.o2.co.uk - but that ONLY worked on contract plans.
They categorically stated that PAYT O2 ONLY features WAP GPRS, i.e. those small WAP-sites suited to mobile phones, and not the 'full deal' (ie web browsing, irc, MSN MEssenger etc)
...so, after a LONG time with O2 PAYT, I am now a Vodafone customer with a Vodafone PAYT SIM!
I can surf the web, join my irc channels, use MSN Messenger, the works, and they emailled me the correct settings the very same day I emailled them to ask for them too.
Joe Pinball
now a happy Vodafone GPRS internet user!
Hi,
just got an 2nd hand xda IIi earlier on today and seem somewhat shafted as i only have macs and no pcs, been looking arround for the last few hours to find some form of sync software which doesnt cost
can anyone tell me how to update the rom from a mac?
cheers
Ok,
so im guessing from spending hours searching the forums here last night unless im willing to buy pocketmac or missing sync there is nothing.
think i will use a virtual pc *sigh*
roll on the x86 mac hardware.
Mac OS is based on BSD. I believe there are scripts floating around here in perl that any decent *nix flavour should run. Perhaps some of these might be able to help you.
if you can run a Virtual PC with access to USB ports on the Mac, I'd reckon that would be the easiest (!) approach to adding Activesync for syncing files etc & installing any applications, as all of the pocket PC apps' installers are also windows-based.
Joe
had a long look for perl stuff and didnt find much so got virtual pc installed now. just got pugs rom on the xda and the speed has incresed (it doesn't feel as slugish anymore) wifi signal is a lot better, but i still seem to have BT issues, wonder if thats something to do with my headset though.. sounds like bad reception sometimes even though the phone is only in my coat pocket.

GPS/E-mail Questions

Hey Guys,
I am pretty much all set up. Thanks to all the help and information i was able to Flash it to Helimis Big Storage Dynamic version, added some programs. All works great. Only outstanding items:
E-mail -When i set up gmail pop connection it doesnt seem to connect to gather the messaages on 3g/Edge serivce. However, i did a test and turned on the wireless connection in the comm manager. As soon as i have done this Gmail POP3 works like a charm. As soon as i disconnect the problem persists. I have 39.99 3g data plan. Should the mail work through this data plan? or do i need to always switch to wireless in order to recieve mail? (HIGHly doubt it)
GPS- I have yet to put tomtom on, but i tried my google maps. It "worked" great at one point, I ran Quick GPS and it was able to triangulate my location (get a lock signal -7-8 satelaties), but now it doesnt work. I know i read somewhere not to mess with external GPS, but i switched to COM port 2 but i never un-checked the "auto-config GPS". Do you know what could be causing it not lock in onto my location now. I think it actually did work after i changed to COM2.
COMmanager - i updated my comm manager to duttythroy 10 button version. It has a 3g button to disable it since it drains a lot of battery power. However, how do i disable the GPRS/EDGE doesnt it drain power as well? i see in the Kaiser section there is also duttythroy_data_disconnection+_hspda-switch.cab (what will this exactly doo?)
Thanks all.
Other than these my TILT is amazing.. loving it.. Thanks to everyone who posted and helped.
Dmitriy
e-mail: Does web browsing work? If so, then you might have a server setup problem. If not, call AT&T's support and ask for the PDA help group.
GPS: In my case the GPS is COM4: and 4800 baud. You can set this in "Start", "Settings", "External GPS", then let Google use the "Use Windows Settings" checkbox.
COMmanager: Use Bandswitch instead. Works much better. Latest is 2.4.2, and much be purchased, but worth every penny. (30 day trial I think tho)
scottwilkins said:
e-mail: Does web browsing work? If so, then you might have a server setup problem. If not, call AT&T's support and ask for the PDA help group.
GPS: In my case the GPS is COM4: and 4800 baud. You can set this in "Start", "Settings", "External GPS", then let Google use the "Use Windows Settings" checkbox.
COMmanager: Use Bandswitch instead. Works much better. Latest is 2.4.2, and much be purchased, but worth every penny. (30 day trial I think tho)
Click to expand...
Click to collapse
GPS: - do you put this under Program or Hardware tab? Or do i put com 4 port in both places
E-mail - internet works.. So i guess Server setup problem?
COMmanager- I just took a quick glance at Bandswitch. It seems that it can do everything that ComManager + Kaiser Tweak (kaiser can set time to termination of data connection. My question is.. in the com manager- you can terminate 3g, but GPRS turns on.. does GPRS drain battery? should there be another button to turn off GPRS too?
contact importer
Also anyone know whats a good contact importer. I have a CSV file with 138 entries similar to this one.
Type FirstName Last Name Mobile Home Office -1 IVAN Peters 16462366421
Email: For gmail, i put "recent:" in front of my email addy so it would be recent:[email protected] That should make it work.
fb401 said:
Email: For gmail, i put "recent:" in front of my email addy so it would be recent:[email protected] That should make it work.
Click to expand...
Click to collapse
Thanks for the advice it already has rescent in it. It works when i turn on wifi, so all settings are correct. It simply doesnt work with 3G (and wifi off).
Any ideas on contact importer?
webdk said:
Thanks for the advice it already has rescent in it. It works when i turn on wifi, so all settings are correct. It simply doesnt work with 3G (and wifi off).
Any ideas on contact importer?
Click to expand...
Click to collapse
gmail: check your advanced settings and choose your connection instead of internet choose medianet...that's how i got mine to work...even if it's set to medianet it will still connect through wifi...
strikeIII said:
gmail: check your advanced settings and choose your connection instead of internet choose medianet...that's how i got mine to work...even if it's set to medianet it will still connect through wifi...
Click to expand...
Click to collapse
i am sorry where do i find advanced settings for gmail.
webdk said:
i am sorry where do i find advanced settings for gmail.
Click to expand...
Click to collapse
in messaging - menu - options - select your gmail account then keep hitting next until you see the advanced server settings option...
strikeIII said:
in messaging - menu - options - select your gmail account then keep hitting next until you see the advanced server settings option...
Click to expand...
Click to collapse
Thanks appreciate it works great now. gps and email. Gps had to be set to com 4.
Another question, how do you set it so that all forms of links start Opera instead of internet explorer.
webdk said:
Another question, how do you set it so that all forms of links start Opera instead of internet explorer.
Click to expand...
Click to collapse
I would love to know the answer to that one. I can only get Opera to run if I click the Java link, then copy/paste my links over. Quite tedious.
I would also like a 1-click way to start Opera....
Flapjack said:
I would love to know the answer to that one. I can only get Opera to run if I click the Java link, then copy/paste my links over. Quite tedious.
I would also like a 1-click way to start Opera....
Click to expand...
Click to collapse
go to this link
http://forum.xda-developers.com/showthread.php?t=334999&page=4&highlight=Opera
download the opera mini and selector link...copy and save the opera mini link to windows/start menu/programs folder then copy the selector file to windows/Appdb folder then you'll be able to set the Interenet explorer button in button settings to opera...this is also assuming you are using jbed java midlet...i'm not sure if it works on other java midlet managers...cheers...
strikeIII said:
go to this link
http://forum.xda-developers.com/showthread.php?t=334999&page=4&highlight=Opera
download the opera mini and selector link...copy and save the opera mini link to windows/start menu/programs folder then copy the selector file to windows/Appdb folder then you'll be able to set the Interenet explorer button in button settings to opera...this is also assuming you are using jbed java midlet...i'm not sure if it works on other java midlet managers...cheers...
Click to expand...
Click to collapse
Thanks, I'll try that tonight.
Opera issues
Hey guys, i dont know what happened, but now all the sudden when i use Opera EVERY link i click on i end up loosing Medianet connection and it trys to re-establish it. It ultimatelly suceeds and loads the page... but this does not happen with Internet Explorer (everything works fine there). I also have KaiserTweak set to disconnect internet after 1 min of inactive use.. but its definatelly not that.. since i am active during my "test" browsing period. (which i did)
Any ideas.. i mean ITS Extremelly SLOW (sometimes 4 attempts to re-establish connection) and annoying.. It is also weird that it does actually make the 3g connection but then it breaks for no reason (tested in various locations)
Thanks for previous help - all those problems been solved - Except linking opera to all links (i click on) -> I am reading the trade posted in this thread about it.
- Question though.. i dont need to place a link into windows folder i guess since when i click explorer softkey it automatically opens Java Midlet. Or do i still need to perform that step?
webdk said:
Hey guys, i dont know what happened, but now all the sudden when i use Opera EVERY link i click on i end up loosing Medianet connection and it trys to re-establish it. It ultimatelly suceeds and loads the page... but this does not happen with Internet Explorer (everything works fine there). I also have KaiserTweak set to disconnect internet after 1 min of inactive use.. but its definatelly not that.. since i am active during my "test" browsing period. (which i did)
Any ideas.. i mean ITS Extremelly SLOW (sometimes 4 attempts to re-establish connection) and annoying.. It is also weird that it does actually make the 3g connection but then it breaks for no reason (tested in various locations)
Thanks for previous help - all those problems been solved - Except linking opera to all links (i click on) -> I am reading the trade posted in this thread about it.
- Question though.. i dont need to place a link into windows folder i guess since when i click explorer softkey it automatically opens Java Midlet. Or do i still need to perform that step?
Click to expand...
Click to collapse
I'm not sure whats causing your disconnect i never have that issue...but about your question...with the opera shortcut in your start menu it skips the step of opening your midlet manager then clicking on opera...then when you put that selector file in your windows folder its never asks for permission to remember your session and whatnot...it just goes straight to the home page in opera...
strikeIII said:
I'm not sure whats causing your disconnect i never have that issue...but about your question...with the opera shortcut in your start menu it skips the step of opening your midlet manager then clicking on opera...then when you put that selector file in your windows folder its never asks for permission to remember your session and whatnot...it just goes straight to the home page in opera...
Click to expand...
Click to collapse
Thanks. I will try that.. Would be much better.
Anyone can help me as far as the constant disconnects?

Logmein problem, please help

I am having a problem with logmein from my phone.
a bit of a background.
I'm loggin into a Windows XP machine.
I have the logmein free account.
I can use a PC and it logs me in just fine.
It works on my account from my friends Sprint Mogul PPC just fine with WM6 and ractre cab
No matter what ROM on my Kaiser, it gets the same error
No matter what browser I use on my Kaiser, it gets the same error.
The problem. I have the cab installed already that I DLd from logmein.com. I go to logmein.com and type in my login info/pass. I click "logmein".
about 1 in (5-50) times it will then take me to the screen where I can select my computer. The other 4-49 times, it takes me back to the login screen where you enter your login info. There arent any error messages or anything. I then click "back" in PIE and hit the submit button again. repeat this a ton of times until it logs me in.
The next screen is where you select your computer. The same thing happens here, and it will bring me to the login screen. Click back and submit again and million times and eventually it will work.
Once I get to the screen where you can click "Remote control" this works fine.
I've asked on logmeins forums and no responses. I emailed their tech support and no responses.
I dont know what to do at this point except move to different software.
any ideas?
I assumed you did a serach for Logmein?
http://forum.xda-developers.com/showpost.php?p=1683012&postcount=2
grizzley said:
I assumed you did a serach for Logmein?
http://forum.xda-developers.com/showpost.php?p=1683012&postcount=2
Click to expand...
Click to collapse
Yes. and I assume you read the part where i've already installed that?
it works for me after....
running the disable cingular proxy cab.
I used to get the exact issue you have on my Tilt. Here's what I've found to work.
Run the disable Cingular Proxy cab (search around, its everywhere in these forums) PRIOR to entering your username/pass.
If i have done this, it will go the 1st and every time to the my computers list and then i can RC from there.
If i forget to run it and i hit "the loop", you can leave IE running and run the cab from a file explorer, then switch back to IE and try again.
Annoying, i know...this coupled with the need to use IE rather than Opera Mini are definite cons to using Logmein on WinMo, but I still need to almost everyday.
Let me know if you can't get this solution to work for you.
I tried that and it didnt work.
Downloaded disable cingular proxy cab.
rebooted.
ran disable cing proxy cab
ran PIE
went to logmein.com
logged in (that part went fine)
clicked on computer.
it took me to login page.
rebooted
ran pie
ran disable cing proxy cab
went to logmein
tried loggin in.
looped =/
Nobody has a good answer for this that I have been able to find. You can try loggin in on LogMeIn's PDA site, https://secure.logmein.com/pda That stopped the endless log in loop problem for me, and I can get to my computer groups. However, I can't remotely control anything. I click the computer I want, enter the password, and it brings up a screen with whatever options that computer has (just Remote Control for LogMeIn Free, Remote Control and File Manager for LogMeIn Pro.) You click Remote Control, and it doesn't do anything, just brings you right back to the same screen. File Manger DOES work on the computer I have LogMeIn Pro on, but I really need the Remote Control. It is maddening, nobody at LogMeIn or any other phone forums seems to know why this is happening. I never had the proxy setup to begin with, everybody keeps talking about proxies like that's the problem, but disabling the proxies doesn't solve the problem for a huge number of folks. I've been able to find solutions to all my other Tilt problems with a little diligent googling, but not this one. I'd love an answer myself!
sorry...
sorry guys..
I have tried almost every kaiser rom here, and at least half of the wizard ones when i had that and the logmein has been a thorn in my side as well, except for me the toggle of disable/enable proxies works every time.
I wish you both luck in your searches for a more universal answer to this problem.
the real key is a fully supported solution from logmein...
Are you using PIE Plus or another multi tab browsing utility? The happens to me with PIE Plus, but only if I select Pocket View in the view settings.
i gots it 2 work!
i am using
Kaiser/TILT
w/ Duttys DualTouch V3 Final(WM6)
AT&T Service
@ 1st logmein wouldnt work
but i was trying to use it w/ Opera
it only works w/ internet explorer.
people said it does not work w/ WM6
that is false.
it looped continuously w/ that loggin crap until
i did the following.
TO GET IT TO WORK:
uninstall RACtrlCE.cab if already installed.
clear IE cookies.
soft reset
download the RACtrlCE
on your PC via
this link:
http://forum.xda-developers.com/showthread.php?p=1828858#post1828858
the cab is in the above post link scroll to find it.
transfer the cab via
exchange connection.
install cab on your phone.
then soft reset.
go to www.logmein.com
which should automatically redirect
you to https://secure.logmein.com/pda.
log in and u should b in business!
Okay, I post a question in this thread & what happens????
Now everytime I log into Logmein.com I connect fine but about every five minutes I lose the connection & get an "Invalid IP Address" error. Anyone have this problem? I tried adding my own IP but then I can't connect period. Anyone know a fix?
isimme said:
i am using
Kaiser/TILT
w/ Duttys DualTouch V3 Final(WM6)
AT&T Service
@ 1st logmein wouldnt work
but i was trying to use it w/ Opera
it only works w/ internet explorer.
people said it does not work w/ WM6
that is false.
it looped continuously w/ that loggin crap until
i did the following.
TO GET IT TO WORK:
uninstall RACtrlCE.cab if already installed.
clear IE cookies.
soft reset
download the RACtrlCE
on your PC via
this link:
http://forum.xda-developers.com/showthread.php?p=1828858#post1828858
the cab is in the above post link scroll to find it.
transfer the cab via
exchange connection.
install cab on your phone.
then soft reset.
go to www.logmein.com
which should automatically redirect
you to https://secure.logmein.com/pda.
log in and u should b in business!
Click to expand...
Click to collapse
Followed these exact steps. still loops for me X 1000
I tried installing to device, then my storage card, repeating all steps.
The odd thing is that I downloaded minimozilla (mobile firefox) and it logs in JUST FINE) but of course stops at the point where it would show you the desktop. but has ZERO issues loggin in.
*SIGH*
Anyword on a fix for Mismatched IP Address error?
i dont have anything on the mismatched ip thing.
I did manage to solve my problem on my own.
So anyone else still having this problem:
start|settings|connections|connections|Advanced Tab|Select Networks
In the top drop down, select the tab for the internet that you use (Medianet, etc)
Click edit.
Bottom tab click proxy settings.
Uncheck "this network uses a proxy server to connect to the Internet"
Click ok.
The cab that is supposed to do this didnt work for me. but doing this manually works for me.
Working perfect on Blackstone with the cab downloaded from logmein.com with Internet explorer.Not working in Opera.
My steps:Opened https://secure.logmein.com/pda from IE, logged in to my account,then when i pressed connect logmein forced me download THEIR RACtrice .cab ,installed,restarted IE,and i'm in bussiness.

Blackberry Connect

Can someone please talk me through installing and setting-up blackberry connect for BIS (Thats if it is possible to use it under BIS). I can't for the life of me manage to do it.
I'm in desperate need! Help!
Cheers
I will make a donation to anyone who can solve this ASAP, as it is quite urgent.
Cheers
Alright dude, this info is all over the place, but I'm gonna help you anyways.
BBC will work with BIS, I've been using it for two years.
It works better with some roms than others, & some I have found not at all.
There are several important steps in getting it to work.
First, BBC is an important app for those that use it. Nothing more important than getting my business emails. Follw these steps & let me know.
1. BBC is AKU & device specific for certain carriers. As such BEFORE YOU INSTALL IT, open your registry editor & make the following change:
Navigate to HKLM/System/Version/AKU. Change the value of the AKU key to DWORD of 0.4.4
2. Use KaiserTweak & set your user agent string to your device. For me that is an AT&T Tilt, so mine gets changed from TYTN_II to HTC-8900.
3. Use Connection Settup to make sure device is provisioned for the correct connection, i.e Medianet...
4. Soft Reset Device.
5. Install BBC. After installed, go to setting, system, BBC. It will set everything up & soft reset device again automatically.
6. Make sure you have downloaded the BBC desktop software from here: http://www.america.htc.com/connect/Tilt
It must be installed on a PC connected to you work network, with access to your outlook & BIS server.
5. Open the BBC settings menu via the tray app tab on the today screen or via setting, system, bbc. Once open, select Utility, then push the "register with Network" button.
6. You should recieve a message in you "System" messaging box stating "The device has been registered with the network". Once you recieve this message, connect device to PC, Open the BBC setting again then go into your PC & open the BBC Desktop Connect software. Select "Configure my wireless device". Once done it will tell you provisioning was successful. Now you are done.
Otherwise you will have to ensure that you are setup & that IT has issued you a authentication password & do it using the Activation menu in the BBC app on your device. But it is much easier doing it from a networked PC with the desktop connect tool.
ALSO, make sure you installed BBC to your device. Do not install to SD Card.
Kaiser - Blackberry Connect Activation
HI,
I followed your instruction and then got everything working "apparently".
But noway to send nor to recieved over wireless.
I already wrote this thread
http://forum.xda-developers.com/showthread.php?t=417568
Is the registery modification mandatory on Kaiser ? is it specific to the operator
Can it be done now or I have to desinstall and reinstall BBC ?
Thanks a lot.
Marko

[Q] HTC TD2 & WPA Enterprise EAP PEAP MSchapV2

is it possible to connect to WPA Enterprise networks via WiFi? because I'm searching for a ROM which would allow to connect to the network on my university, which runs the following configuration:
SSID: eduroam
type: WPA-Enterprise
key exchange scheme: TKIP
authorization: EAP-PEAP-MSchapv2
IP: via DHCP
I tried it with the Energy ROM from the forum, but it doesn't allow me to enroll the certificate or it doesn't want to accept it. the other way round it doesn't allow me to enter a user name, I can only put in my password.
could somebody give me a hint what to do? I was searching the forum, found some registry hacks, but none worked
Try to change:
HKLM\\Comm\TNETW12511\Parms\WPAMixedMode
from 1 to 0.
ok, I tried it, but still the same happens:
I enter everything in the configuration menu of the comm manager, click 'next' and then I have to choose a certificate to log on - a little bit lower is a button called 'Enroll', which does nothing when hit. When I try to click 'done' it says that I have to enroll a certificate, so there's only cancel left ...
still doesen't work
well ... can somebody help please?
//edit:
well, as it seems nobody really knows how to work that out ...
Because I'm at my university every two weeks for the weekend, I'll be able to test this way of trying to connect to the WPA enterprise network in a week. but perhaps somebody else can confirm or obey this workaround:
Connect your device to your desktop/laptop and when WindowsMobileDeviceCenter (Win 7: just type the name in the search field in the start bar) opens go to Mobile Device settings >> More >> Get Device Certificates >> I know What Certificate I need to Enrol >> User ... then click enroll. Watch your device as you will be prompted to install the cert. Follow the prompts and after a few seconds you're done. When you setup your wifi connection choose PEAP and enter all the needed information.
Click to expand...
Click to collapse
It's help I got from microsoft social answers, perhaps somebody can try that out ...?
in case you understand german
http://www.rrz.uni-hamburg.de/fileadmin/internet_kommunikation/smartphone/htc-hd2_uhh-wpa.pdf
it's from my university. it also contains the instructions for eduroam.
in addition to that manual, I had to uncheck "check server certificate" in the certificate tab of the secureW2 plug-in
jones23 said:
in case you understand german
http://www.rrz.uni-hamburg.de/fileadmin/internet_kommunikation/smartphone/htc-hd2_uhh-wpa.pdf
it's from my university. it also contains the instructions for eduroam.
in addition to that manual, I had to uncheck "check server certificate" in the certificate tab of the secureW2 plug-in
Click to expand...
Click to collapse
yes, indeed, I understand german
thanks a lot for this tip, it looks a little bit different on a customized ROM and stuff, but in general it worked - I'll try it on friday or saturday, then I'll be at my university and able to give feedback!
when it'll work, I'll post a translated how-to in this thread...
sorry, I wasn't able to establish the connection with the tip by jones23 ... perhaps it works with WPA2, but not here ...
Hello,
what is the status of this? Did you find a solution?
I have the same issue since I flashed the EnergyROM.
Any ideas?
unfortunately it's truely not possible, I wasn't able to connect to the configuration from the first post using the HTC Diamond II ... damn thing!
but I'm gonna try this weekend something different: imho it's just a software problem, it's got nothing to do with hardware ... so I'm gonna try a dual boot with android and connect with that, perhaps this will work. I'll give feddback
ok, during clicking around on the device I found the solution:
Comm Manager -> Settings -> WLAN -> Network Cards
Here you can ignore the certificate and enter login data for the WIFI network.
Hopefully someone else can use this information.
@ taschenuhr
thats great to hear
@ others
perhaps you can use a notebook for testing purposes, since the connection & login data is the same. there's a windows (mac) version of that same client software.

Categories

Resources