Can someone please talk me through installing and setting-up blackberry connect for BIS (Thats if it is possible to use it under BIS). I can't for the life of me manage to do it.
I'm in desperate need! Help!
Cheers
I will make a donation to anyone who can solve this ASAP, as it is quite urgent.
Cheers
Alright dude, this info is all over the place, but I'm gonna help you anyways.
BBC will work with BIS, I've been using it for two years.
It works better with some roms than others, & some I have found not at all.
There are several important steps in getting it to work.
First, BBC is an important app for those that use it. Nothing more important than getting my business emails. Follw these steps & let me know.
1. BBC is AKU & device specific for certain carriers. As such BEFORE YOU INSTALL IT, open your registry editor & make the following change:
Navigate to HKLM/System/Version/AKU. Change the value of the AKU key to DWORD of 0.4.4
2. Use KaiserTweak & set your user agent string to your device. For me that is an AT&T Tilt, so mine gets changed from TYTN_II to HTC-8900.
3. Use Connection Settup to make sure device is provisioned for the correct connection, i.e Medianet...
4. Soft Reset Device.
5. Install BBC. After installed, go to setting, system, BBC. It will set everything up & soft reset device again automatically.
6. Make sure you have downloaded the BBC desktop software from here: http://www.america.htc.com/connect/Tilt
It must be installed on a PC connected to you work network, with access to your outlook & BIS server.
5. Open the BBC settings menu via the tray app tab on the today screen or via setting, system, bbc. Once open, select Utility, then push the "register with Network" button.
6. You should recieve a message in you "System" messaging box stating "The device has been registered with the network". Once you recieve this message, connect device to PC, Open the BBC setting again then go into your PC & open the BBC Desktop Connect software. Select "Configure my wireless device". Once done it will tell you provisioning was successful. Now you are done.
Otherwise you will have to ensure that you are setup & that IT has issued you a authentication password & do it using the Activation menu in the BBC app on your device. But it is much easier doing it from a networked PC with the desktop connect tool.
ALSO, make sure you installed BBC to your device. Do not install to SD Card.
Kaiser - Blackberry Connect Activation
HI,
I followed your instruction and then got everything working "apparently".
But noway to send nor to recieved over wireless.
I already wrote this thread
http://forum.xda-developers.com/showthread.php?t=417568
Is the registery modification mandatory on Kaiser ? is it specific to the operator
Can it be done now or I have to desinstall and reinstall BBC ?
Thanks a lot.
Marko
Related
Hi guys - need some help.
Been following the guide on how to get Vodaphone Live to work on the HTC branded TytnII.
Done the registry editor changes to it now appears to be an Nokia N95... but every time I try to copy the Browsers.dll file across to the windows directory I get a write permissions error.
Any ideas?
Cheers
Tony
Try using Resco Explorer or Total Commander to copy "browser.dll" to \Windows...
I think the built-in file explorer will give you an error, but those two should allow you to copy it over.
kaiserchief said:
Try using Resco Explorer or Total Commander to copy "browser.dll" to \Windows...
I think the built-in file explorer will give you an error, but those two should allow you to copy it over.
Click to expand...
Click to collapse
Thanks you're a Star... Resco explorer worked like a charm...
Vodaphone Live and HTC TytnII.
Hi guys - need some help.
where can i find the guide
to get Vodaphone Live to work on the HTC TytnII.
i am looking for
the registry editor changes needed to work'
nikosroy said:
Hi guys - need some help.
where can i find the guide
to get Vodaphone Live to work on the HTC TytnII.
i am looking for
the registry editor changes needed to work'
Click to expand...
Click to collapse
Hiya this is the guide I used:
http://www.modaco.com/Vodafone-Live-Settings-t259142.html
I tried the settings in the thread Wise1 gave but it didn't work. Has anyone got vodafone live to work on the TyTnII?
Use the cab in here...
It uses the same browser.dll and reg settings as mentioned in the guide, but only takes two seconds (and a soft reset).
Oh, and always remember that you have to connect to the internet via the *WAP* settings before you can get on to Vodafone Live! - you'll get an error if you're connected via the "Internet" settings.
Enjoy!
It Worked!!!!
Thanks Sub69 it worked. I had spent hours trying to get Mobile TV.
Just thought I'd add one note though for those people that download the cab and then expend the Internet browser to work.
Once you have installed the cab go to START, Settings, Connections, then click on Connections icon. Click on Advanced and Select Networks. On programs that automatically connect to the Internet, select Contract WAP from the dropdown menu.
Next goto Internet Exployer and type http://live.vodafone.net. It should then work.
p.s. turn off WiFi as this will stop internet streaming on vodafone live
Thank you for this...
This worked perfectly for me, although I had to enter wsp://live.vodafone.com before it loaded the vodafone live! homepage (http:// at the start didn't work).
Amazing isn't it how Vodafone happily sell Windows Mobile devices but don't support them with Vodafone live and Pocket IE!
Personally, I use: http://live.vodafone.co.uk but as long as it all works, that's the main thing!
And yes, you must be connected via the *WAP* settings otherwise you get a "service is not responding at this time" error.
Bit of a pain that - I've tried all sorts of fiddling with the exception list etc. and I just can't get it to switch connection settings automatically when navigating to the Vodafone pages.
app to devellop...
If a dev guys could write a little apps with two big button to switch to :
* Vodafone Live wap
* Defaut internet
it's would be nice if you can setup within the applic 2 network config something like:
Button1(I):
Internet connect with : ....
Work connect wit : ....
Button 2(WAP):
Internet connect with : ....
Work connect wit : ....
and an option to start PIE to another web page ... with button 2...
Still not working...even with the .cab
Thanks guys...I'm another HTC TYTN ii user and I got all excited reading this thinking I'd finally found the fix (I hate Vodafone for selling me the Vodafonelive/MobileTV package and then not supporting me!!). I've loaded the .cab and followed the instructions for the reset. I'm also using WAP to now try and access the vodafone live sites...but no joy!!! :-( The following errors occur on each respective 'potential' Vodafone live page.
http://live.vodafone.co.uk - Gives me the error message: Bad Gateway - The proxy server received an invalid response from an upstream server. Additionally, a 502 Bad gateway error was encountered while trying to use an ErrorDocument to handle the request.
http://live.vodafone.com - This must timeout in some other way because I get an IE initiated message saying The page cannot be displayed or downloaded because the connection was lost. Check the connection and try again later.
http://live.vodafone.net again an IE initiated message saying The page cannot be found. Check the name and try again.
wsp://live.vodafone.net again an IE initiated message saying The page cannot be found. Check the name and try again.
wsp://live.vodafone.com This must timeout in some other way because I get an IE initiated message saying The page cannot be displayed or downloaded because the connection was lost. check the connection and try again later.
wsp://live.vodafone.co.uk
Can someone please advise if I need to do anything else...or can you think of anything else that I can try???
By the way...I do at least get the EXCEPTIONS working out in Connections...By inputting the above sites into EXCEPTIONS, they do connect over WAP rather than IS(3G).
Pleeeeeease help! Cheers.
The cause is just your tricks to use exception...! Don't try to use it, even if it connect right...do a manual connect you will see the difference
I got those sorts of error messages when I was trying to work out how to use the exception list too. Very long "loading" times, followed by IE timeout errors.
Should work fine if you set your connections so that the "Programs that automatically connect to the Internet" are using the "Contract WAP" settings...
Same here?!
Deepdivedog1 said:
Thanks guys...I'm another HTC TYTN ii user and I got all excited reading this thinking I'd finally found the fix (I hate Vodafone for selling me the Vodafonelive/MobileTV package and then not supporting me!!). I've loaded the .cab and followed the instructions for the reset. I'm also using WAP to now try and access the vodafone live sites...but no joy!!! :-( The following errors occur on each respective 'potential' Vodafone live page.
http://live.vodafone.co.uk - Gives me the error message: Bad Gateway - The proxy server received an invalid response from an upstream server. Additionally, a 502 Bad gateway error was encountered while trying to use an ErrorDocument to handle the request.
http://live.vodafone.com - This must timeout in some other way because I get an IE initiated message saying The page cannot be displayed or downloaded because the connection was lost. Check the connection and try again later.
http://live.vodafone.net again an IE initiated message saying The page cannot be found. Check the name and try again.
wsp://live.vodafone.net again an IE initiated message saying The page cannot be found. Check the name and try again.
wsp://live.vodafone.com This must timeout in some other way because I get an IE initiated message saying The page cannot be displayed or downloaded because the connection was lost. check the connection and try again later.
wsp://live.vodafone.co.uk
Can someone please advise if I need to do anything else...or can you think of anything else that I can try???
By the way...I do at least get the EXCEPTIONS working out in Connections...By inputting the above sites into EXCEPTIONS, they do connect over WAP rather than IS(3G).
Pleeeeeease help! Cheers.
Click to expand...
Click to collapse
Same here?! Kaiser (Vario III) with Dutty´s Kaiser Final 2 (TouchFlo). Running fine.
What happened:
Try to establish internet connection. "wap.vodafone.de" (without Proxy)
- Vodafone Mail works fine (POP)
- IE (only http://www.vodafone.de) works fine
- Every other page (also wsp://live.vodafone.de) The page cannot be found. Check the name and try again.
Add Proxy 139.007.029.001 like it is written in some "Threads":
- Vodafone Mail --> did not work any longer. Sync error (Could not establish connection)
- No IE connection is possible.
Any idea?
Thanks. Bye.
Reversing the Vodafone cab file
Hi Sub69
I have been able to use Vodafone Live TV fine on my TyTn II for sometime but recently I wanted to look on a site that won't work as it said that my phone had been detected as a Symbian S60 unit and wanted me to download a .sis file which obviously won't work on the TyTn II. Have you got a cab file that does the reverse of the vodafone Live cab file and reverts the TyTn back to a WM6 device as far as some programs are concerned. I will then be able to toggle between the 2 as and when I need to.
Thanks
I am having a problem with logmein from my phone.
a bit of a background.
I'm loggin into a Windows XP machine.
I have the logmein free account.
I can use a PC and it logs me in just fine.
It works on my account from my friends Sprint Mogul PPC just fine with WM6 and ractre cab
No matter what ROM on my Kaiser, it gets the same error
No matter what browser I use on my Kaiser, it gets the same error.
The problem. I have the cab installed already that I DLd from logmein.com. I go to logmein.com and type in my login info/pass. I click "logmein".
about 1 in (5-50) times it will then take me to the screen where I can select my computer. The other 4-49 times, it takes me back to the login screen where you enter your login info. There arent any error messages or anything. I then click "back" in PIE and hit the submit button again. repeat this a ton of times until it logs me in.
The next screen is where you select your computer. The same thing happens here, and it will bring me to the login screen. Click back and submit again and million times and eventually it will work.
Once I get to the screen where you can click "Remote control" this works fine.
I've asked on logmeins forums and no responses. I emailed their tech support and no responses.
I dont know what to do at this point except move to different software.
any ideas?
I assumed you did a serach for Logmein?
http://forum.xda-developers.com/showpost.php?p=1683012&postcount=2
grizzley said:
I assumed you did a serach for Logmein?
http://forum.xda-developers.com/showpost.php?p=1683012&postcount=2
Click to expand...
Click to collapse
Yes. and I assume you read the part where i've already installed that?
it works for me after....
running the disable cingular proxy cab.
I used to get the exact issue you have on my Tilt. Here's what I've found to work.
Run the disable Cingular Proxy cab (search around, its everywhere in these forums) PRIOR to entering your username/pass.
If i have done this, it will go the 1st and every time to the my computers list and then i can RC from there.
If i forget to run it and i hit "the loop", you can leave IE running and run the cab from a file explorer, then switch back to IE and try again.
Annoying, i know...this coupled with the need to use IE rather than Opera Mini are definite cons to using Logmein on WinMo, but I still need to almost everyday.
Let me know if you can't get this solution to work for you.
I tried that and it didnt work.
Downloaded disable cingular proxy cab.
rebooted.
ran disable cing proxy cab
ran PIE
went to logmein.com
logged in (that part went fine)
clicked on computer.
it took me to login page.
rebooted
ran pie
ran disable cing proxy cab
went to logmein
tried loggin in.
looped =/
Nobody has a good answer for this that I have been able to find. You can try loggin in on LogMeIn's PDA site, https://secure.logmein.com/pda That stopped the endless log in loop problem for me, and I can get to my computer groups. However, I can't remotely control anything. I click the computer I want, enter the password, and it brings up a screen with whatever options that computer has (just Remote Control for LogMeIn Free, Remote Control and File Manager for LogMeIn Pro.) You click Remote Control, and it doesn't do anything, just brings you right back to the same screen. File Manger DOES work on the computer I have LogMeIn Pro on, but I really need the Remote Control. It is maddening, nobody at LogMeIn or any other phone forums seems to know why this is happening. I never had the proxy setup to begin with, everybody keeps talking about proxies like that's the problem, but disabling the proxies doesn't solve the problem for a huge number of folks. I've been able to find solutions to all my other Tilt problems with a little diligent googling, but not this one. I'd love an answer myself!
sorry...
sorry guys..
I have tried almost every kaiser rom here, and at least half of the wizard ones when i had that and the logmein has been a thorn in my side as well, except for me the toggle of disable/enable proxies works every time.
I wish you both luck in your searches for a more universal answer to this problem.
the real key is a fully supported solution from logmein...
Are you using PIE Plus or another multi tab browsing utility? The happens to me with PIE Plus, but only if I select Pocket View in the view settings.
i gots it 2 work!
i am using
Kaiser/TILT
w/ Duttys DualTouch V3 Final(WM6)
AT&T Service
@ 1st logmein wouldnt work
but i was trying to use it w/ Opera
it only works w/ internet explorer.
people said it does not work w/ WM6
that is false.
it looped continuously w/ that loggin crap until
i did the following.
TO GET IT TO WORK:
uninstall RACtrlCE.cab if already installed.
clear IE cookies.
soft reset
download the RACtrlCE
on your PC via
this link:
http://forum.xda-developers.com/showthread.php?p=1828858#post1828858
the cab is in the above post link scroll to find it.
transfer the cab via
exchange connection.
install cab on your phone.
then soft reset.
go to www.logmein.com
which should automatically redirect
you to https://secure.logmein.com/pda.
log in and u should b in business!
Okay, I post a question in this thread & what happens????
Now everytime I log into Logmein.com I connect fine but about every five minutes I lose the connection & get an "Invalid IP Address" error. Anyone have this problem? I tried adding my own IP but then I can't connect period. Anyone know a fix?
isimme said:
i am using
Kaiser/TILT
w/ Duttys DualTouch V3 Final(WM6)
AT&T Service
@ 1st logmein wouldnt work
but i was trying to use it w/ Opera
it only works w/ internet explorer.
people said it does not work w/ WM6
that is false.
it looped continuously w/ that loggin crap until
i did the following.
TO GET IT TO WORK:
uninstall RACtrlCE.cab if already installed.
clear IE cookies.
soft reset
download the RACtrlCE
on your PC via
this link:
http://forum.xda-developers.com/showthread.php?p=1828858#post1828858
the cab is in the above post link scroll to find it.
transfer the cab via
exchange connection.
install cab on your phone.
then soft reset.
go to www.logmein.com
which should automatically redirect
you to https://secure.logmein.com/pda.
log in and u should b in business!
Click to expand...
Click to collapse
Followed these exact steps. still loops for me X 1000
I tried installing to device, then my storage card, repeating all steps.
The odd thing is that I downloaded minimozilla (mobile firefox) and it logs in JUST FINE) but of course stops at the point where it would show you the desktop. but has ZERO issues loggin in.
*SIGH*
Anyword on a fix for Mismatched IP Address error?
i dont have anything on the mismatched ip thing.
I did manage to solve my problem on my own.
So anyone else still having this problem:
start|settings|connections|connections|Advanced Tab|Select Networks
In the top drop down, select the tab for the internet that you use (Medianet, etc)
Click edit.
Bottom tab click proxy settings.
Uncheck "this network uses a proxy server to connect to the Internet"
Click ok.
The cab that is supposed to do this didnt work for me. but doing this manually works for me.
Working perfect on Blackstone with the cab downloaded from logmein.com with Internet explorer.Not working in Opera.
My steps:Opened https://secure.logmein.com/pda from IE, logged in to my account,then when i pressed connect logmein forced me download THEIR RACtrice .cab ,installed,restarted IE,and i'm in bussiness.
I have blackberry connect on my phone, but I can't seem to setup email. I have BIS plan and the setup email button is not lit up..
I've read somewhere that I have to provision my phone or something..
On the service is says Provisioning.. is it suppose to be saying that?
Do I have to plug my phone onto my PC to use blackberry connect? because I have hardware issues with my TyTN II.. so I am unable to connect.
anyone? help
ive never understoos why people want blackberry connect on an exchange capable device.
Is there any big difference betweem the two?
How To Enable BBC CONNECT TO THIS ROM
Install instructions:
1) goto hklm>system>versions and change what ever is there to .0.4.2 (The leading . before the 0 needs to be there)
2) Install bbconnect cab file.
3) If you don't get the check boxes at the end of the install (Calendar, notes, etc). Re-run the install (it will remove the 1st instance), I always get it the second time.
4) Wait for Blackberry to finish "setting up device for first use" and let it reboot.
5) On reboot, status will now show the PIN number.
austinsnyc said:
How To Enable BBC CONNECT TO THIS ROM
Install instructions:
1) goto hklm>system>versions and change what ever is there to .0.4.2 (The leading . before the 0 needs to be there)
Click to expand...
Click to collapse
It's already says .0.4.2 when I got there.
austinsnyc said:
5) On reboot, status will now show the PIN number.
Click to expand...
Click to collapse
I have the PIN # now.. all I need to know is how to setup email.. it won't let me press the setup email button
austinsnyc said:
How To Enable BBC CONNECT TO THIS ROM
Install instructions:
1) goto hklm>system>versions and change what ever is there to .0.4.2 (The leading . before the 0 needs to be there)
2) Install bbconnect cab file.
3) If you don't get the check boxes at the end of the install (Calendar, notes, etc). Re-run the install (it will remove the 1st instance), I always get it the second time.
4) Wait for Blackberry to finish "setting up device for first use" and let it reboot.
5) On reboot, status will now show the PIN number.
Click to expand...
Click to collapse
I have spent all day trying to get my o2 Stellar to give me a PIN...no luck. I have read a lot and i have reached the conclusion that what you write here is correct but does not work for me. Is it because o2 in the UK use different settings? I have also tried .0.4.4.
If anyone could help would be appreciated
YOU NEED TO DOWNLOAD Blackberry Connect Desktop to a computer on the company network, plug into USB & then select configure device.
The PIN is generated between the device & the network, your provider CANNOT give it to you.
Also, make sure you've registered with the network first, there is a button in BBC settings for that.
Is it possible to allow the X1i internet access through a PC that has a connection to the internet itself?
I've been googling but was unable to find an answer Tried ICS but it didn't want to work. Any tips appreciated!
Shoyu said:
Is it possible to allow the X1i internet access through a PC that has a connection to the internet itself?
I've been googling but was unable to find an answer Tried ICS but it didn't want to work. Any tips appreciated!
Click to expand...
Click to collapse
This has been asked, discussed and answered before.
May I suggest you to search previous threads titles to find ample details about this
BTW: YES it works a treat and it's worth (at least for me)
I can share my 3600kbps HSDPA internet to my laptop and my PC by just plugging the USB cable or thru WiFi
All you need is activesync and launch the "internet sharing" program
gtrab said:
This has been asked, discussed and answered before.
May I suggest you to search previous threads titles to find ample details about this
BTW: YES it works a treat and it's worth (at least for me)
I can share my 3600kbps HSDPA internet to my laptop and my PC by just plugging the USB cable or thru WiFi
All you need is activesync and launch the "internet sharing" program
Click to expand...
Click to collapse
That's the other way around from what he wants, from what I understand he wants to share from PC to phone. You need to check "enable advanced network functionality" on the phone, and configure ActiveSync to share the connection, forgot which part of the AS UI it's in (I've been using Vista for too long, and Vista does this by default)
Um...yeah, my xperia does this automatically. I have not configured anything either on the phone, or on the pc itself. I have customized all the programs that need internet updates (like weather, rss feeds etc.) to update themselves when the phone is connected to the pc. Works like a treat and it doesn't matter if it's activesync or simple usb data connection.
Leddy said:
That's the other way around from what he wants, from what I understand he wants to share from PC to phone. You need to check "enable advanced network functionality" on the phone, and configure ActiveSync to share the connection, forgot which part of the AS UI it's in (I've been using Vista for too long, and Vista does this by default)
Click to expand...
Click to collapse
Leddy thank you. The "enable advanced network functionality" on the phone was already checked, but I still could not find the desktop pass-through option in my ActiveSync 4.5 software on the desktop.
I did not give up though and I've finally got mine working - so for those who experience the same issue, this is what I did:
1. Open Registry Editor on your desktop (Start/Run and type "regedit") and locate the key HKEY_LOCAL_MACHINE\Software\Microsoft\Windows CE Services.
2. Right-click on the value list and choose New/DWORD value. Type the name "AllowLSP" and leave the value zero. Disconnect and connect your device and programs on your phone will now have internet access.
This worked well for me. Another possibility that I haven't tested is because I set my "Computer is connected to the Internet" as illustrated here:
http://blogs.msdn.com/windowsmobile/archive/2006/11/20/wmdc-activesync-pass-through-feature.aspx
Thanks guys!
I think it needs set up proxy setting on PDA and install proxyserver soft on PC...
thank you for the sharing... will try....
Internet by Activesync
Also, If you PC is running a firewall, you might need to 'allow' activesync in the firewall settings.
Shoyu said:
Leddy thank you. The "enable advanced network functionality" on the phone was already checked, but I still could not find the desktop pass-through option in my ActiveSync 4.5 software on the desktop.
I did not give up though and I've finally got mine working - so for those who experience the same issue, this is what I did:
1. Open Registry Editor on your desktop (Start/Run and type "regedit") and locate the key HKEY_LOCAL_MACHINE\Software\Microsoft\Windows CE Services.
2. Right-click on the value list and choose New/DWORD value. Type the name "AllowLSP" and leave the value zero. Disconnect and connect your device and programs on your phone will now have internet access.
This worked well for me. Another possibility that I haven't tested is because I set my "Computer is connected to the Internet" as illustrated here:
http://blogs.msdn.com/windowsmobile/archive/2006/11/20/wmdc-activesync-pass-through-feature.aspx
Thanks guys!
Click to expand...
Click to collapse
Thank you Shoyu, your steps works for me too
Thanks Shoyu ... just had to change the setting to " Computer is connected to the internet" at the end and it worked like a charm!! ... Atlast someone providing a solution to a question instead of directing to a search!!
is it possible to connect to WPA Enterprise networks via WiFi? because I'm searching for a ROM which would allow to connect to the network on my university, which runs the following configuration:
SSID: eduroam
type: WPA-Enterprise
key exchange scheme: TKIP
authorization: EAP-PEAP-MSchapv2
IP: via DHCP
I tried it with the Energy ROM from the forum, but it doesn't allow me to enroll the certificate or it doesn't want to accept it. the other way round it doesn't allow me to enter a user name, I can only put in my password.
could somebody give me a hint what to do? I was searching the forum, found some registry hacks, but none worked
Try to change:
HKLM\\Comm\TNETW12511\Parms\WPAMixedMode
from 1 to 0.
ok, I tried it, but still the same happens:
I enter everything in the configuration menu of the comm manager, click 'next' and then I have to choose a certificate to log on - a little bit lower is a button called 'Enroll', which does nothing when hit. When I try to click 'done' it says that I have to enroll a certificate, so there's only cancel left ...
still doesen't work
well ... can somebody help please?
//edit:
well, as it seems nobody really knows how to work that out ...
Because I'm at my university every two weeks for the weekend, I'll be able to test this way of trying to connect to the WPA enterprise network in a week. but perhaps somebody else can confirm or obey this workaround:
Connect your device to your desktop/laptop and when WindowsMobileDeviceCenter (Win 7: just type the name in the search field in the start bar) opens go to Mobile Device settings >> More >> Get Device Certificates >> I know What Certificate I need to Enrol >> User ... then click enroll. Watch your device as you will be prompted to install the cert. Follow the prompts and after a few seconds you're done. When you setup your wifi connection choose PEAP and enter all the needed information.
Click to expand...
Click to collapse
It's help I got from microsoft social answers, perhaps somebody can try that out ...?
in case you understand german
http://www.rrz.uni-hamburg.de/fileadmin/internet_kommunikation/smartphone/htc-hd2_uhh-wpa.pdf
it's from my university. it also contains the instructions for eduroam.
in addition to that manual, I had to uncheck "check server certificate" in the certificate tab of the secureW2 plug-in
jones23 said:
in case you understand german
http://www.rrz.uni-hamburg.de/fileadmin/internet_kommunikation/smartphone/htc-hd2_uhh-wpa.pdf
it's from my university. it also contains the instructions for eduroam.
in addition to that manual, I had to uncheck "check server certificate" in the certificate tab of the secureW2 plug-in
Click to expand...
Click to collapse
yes, indeed, I understand german
thanks a lot for this tip, it looks a little bit different on a customized ROM and stuff, but in general it worked - I'll try it on friday or saturday, then I'll be at my university and able to give feedback!
when it'll work, I'll post a translated how-to in this thread...
sorry, I wasn't able to establish the connection with the tip by jones23 ... perhaps it works with WPA2, but not here ...
Hello,
what is the status of this? Did you find a solution?
I have the same issue since I flashed the EnergyROM.
Any ideas?
unfortunately it's truely not possible, I wasn't able to connect to the configuration from the first post using the HTC Diamond II ... damn thing!
but I'm gonna try this weekend something different: imho it's just a software problem, it's got nothing to do with hardware ... so I'm gonna try a dual boot with android and connect with that, perhaps this will work. I'll give feddback
ok, during clicking around on the device I found the solution:
Comm Manager -> Settings -> WLAN -> Network Cards
Here you can ignore the certificate and enter login data for the WIFI network.
Hopefully someone else can use this information.
@ taschenuhr
thats great to hear
@ others
perhaps you can use a notebook for testing purposes, since the connection & login data is the same. there's a windows (mac) version of that same client software.