Related
my T-Wings give me WIFI problums coz i always Conact WIFI network on my work place but mostly time wifi show its conncted but not working .. but after reset some time its work or some time not
some1 know whtz wrong ?
maliks said:
my T-Wings give me WIFI problums coz i always Conact WIFI network on my work place but mostly time wifi show its conncted but not working .. but after reset some time its work or some time not
some1 know whtz wrong ?
Click to expand...
Click to collapse
have you tried accessing any other wifi connection outside of your workplace ? does it give you the same problem ?
Wifi problums
yes but i didnt face problum other places but on work place its working befor fine
problem with T MOBLE WING
I have the same problem , I even did try connect to my home Wifi it show connected ,but doesn't open to the website I want to ,can some one help,thanks
I had the same problem, I installed batterystatus, and checked the option to disable gprs when wlan is on, and now it works fine...
You don't need batterystatus to do this (the software just does it automatically for you), you can do it by yourself by disabling "data connection" in the connection manager whenever you turn on the wifi radio
-Hope it helps
t-mobile wing wifi problems
I had a similar problem with my wing. It would connect to unsecured WIFI networks and work flawlessly but when I connect to a secured network it would work for about 1 min then just hang while downloading a web page. If you device is doing this send it back to t-mobile and get a new one. This is what I had to do. hopefully you have a warranty.
I just got my T-Mobile Wing and I think I have the same problem. It just doesn't want to work with my WPA-secured Wi-Fi. When I switch WPA off, it works fine.
Did anyone else had a problem like this?
Called T-Mobile, they have nothing like that in their knowledge base.
I got this problem when i installed HTC 10 Button comm manager. I uninstalled it and WiFi works again.
Hope this helps
i have somewht of a similar problem, since ive had my Wing i have been unable to use my wi-fi, when i turn it on it says connected and shows me the lil meter and everythin but when i try browsing or downloadin it just hangs and does nothing until i turn the wi-fi off...i have no clue why i have learned to live without it but would appreciate any help...thanks
Try this it work for me. Whenever you want to connect to secure wpa do this before you make the connection
Start > Setting > Connections > Wifi Status > Power Mode > Move the slide "Best Performance"
Your wing should be able to connect to secure wpa.
Hope this help.
timace said:
i have somewht of a similar problem, since ive had my Wing i have been unable to use my wi-fi, when i turn it on it says connected and shows me the lil meter and everythin but when i try browsing or downloadin it just hangs and does nothing until i turn the wi-fi off...i have no clue why i have learned to live without it but would appreciate any help...thanks
Click to expand...
Click to collapse
Make sure you disconnect from edge/gprs before you try to surf after you are connected to the wifi.
ivanmmj said:
Make sure you disconnect from edge/gprs before you try to surf after you are connected to the wifi.
Click to expand...
Click to collapse
how exactly do i do this? is it what was explained about in the battery status menu and check marking the box 'disable proxy for wi-fi'...?
You can click on the little E or G on top and click on Disconnect.
ivanmmj said:
You can click on the little E or G on top and click on Disconnect.
Click to expand...
Click to collapse
i dont know how i ever survived without wi-fi....WOW....thank u
Thank Ayodeji13. He answered this in the 5th post. ^_^ But, yea, I've done the same thing before and was lucky to realize where the problem was coming from. Unfortunately, it didn't help me with the crappy wifi signal that my Wizard provided me. The wing, on the other hand, is MUCH better at this.
joking said:
Try this it work for me. Whenever you want to connect to secure wpa do this before you make the connection
Start > Setting > Connections > Wifi Status > Power Mode > Move the slide "Best Performance"
Your wing should be able to connect to secure wpa.
Hope this help.
Click to expand...
Click to collapse
Thanks mate... I too was having issues connecting to wifi... its kind of strange... it was connecting to my home network for sometime but later it suddenly stopped. It will connect to other networks but not to my secured network. Today I tried the setting you mentioned and surprisingly my phone connected to my home network... I wonder why because this setting should improve the performance and not the connectivity itself... Thanks again
you can add me to the list of people with wifi issues. I can't connect to my wireless router and I'm stand two feet away from it. It shows up but when I try to connect it says unavailable. I've done everything from turning the data off, to setting the power to best performance but it won't connect.
I need help... Whenever I connect it says I'm connected but actually I'm not. Yesterday I could view directions using live search but couldnt browse the web, not i cant do both. it gets stuck on the locating... part of loading the website. sometimes it gets to opening but the KB bar doesnt come up and it gives me some 500 internal error, or page doesn't exist. I cant do the best performance thing because im using touch it 2.3 rom and i dont have wifi status anymore.
WHY DO YOU HAVE TO REMOVE THAT STUF?!! URGH! I dont even have msn!
But anyways, can someone help me connect to the internet?...
TRY THIS
I have the same problem, i i manage to fix my wifi connectivity by editing the registry.....try this at your own risk.....but swear it works for me. i used total commander to edit registry and go to:
HKEY_LOCAL_MACHINE > SOFTWARE > HTC > Comm Manager >
then you will see folders 0 - 8 or some only have 0 - 7 ,delete folders 6 and up ........ ( I JUST MOVE MINE instead of DELETING IT< I MOVE IT TO STORAGE CARD SO IF SOMETHIN GOFF UP I CAN JUST PUT IT BACK )....
SOFT RESET then try turn your wifi ON , connect to your network.... til me if this works for u guys...
i think the value of those folders are bum hehehehe thats why it wont connect......., after connecting to your wifi secured or not , it will create another folder and add those folders back by default...but this time the good settings lolz its worth a try !
Ok this is realy frustrating. My wing was getting on my secured home network and npw it dose not. I read all the post and have tried some (the ones that I could understand). I dont have the option under battery status to disable gspr or gpsr. And my system is vista 64 so total commder dosen seem to work for reg settings(edits). I can conect to unsecure networks but I cant to my hone (secure) network. I have in the past but it dsent ssem to work now?
I have recently procured an HTC Diamond mobile and is facing the following problem:
I have a Linksys Router at home. When I switch on the Wi-Fi in my Diamond, it gets connected to the router. In the status, I can see the signal strength, Tx, Rx rate etc. But when I open the browser (both opera & IE), the web pages does not open. Error message stating check the url or does any other programme using the internet works? appears. Even my weather does not get updated. Using the same router, I am able to connect my laptop as well as my desktop to Internet.
When my diamond is synced using active sync, my mobile is able to connect to the Internet & Weather application also get updated.
Kindly help me to resolve this issue and make diamond connect to net using wi-fi.
Thank you in advance.
I have the same problem sometimes
I just changed parameter in settings -> connections -> wireless lan -> power mode -> "best performance" instead of "best battery" and it seems to work now.
I'm new to WM, so I don't know if it's a bug: when I don't use my phone I press the power button, or I wait it to go to "sleep mode" in 40s.
When I press power button to reactivate the screen, I can see in the first seconds that the wlan was disconnected and connects again.
So it seems that wifi is always disconnected when the phone is in sleep mode? That means no mails can be received ? Can anyone confirm?
Thanks
Hi there for both of you!
I had a connection problem with my Diamond at home. It was almost the same as tkak just I couldn't figure out whether ActiveSync connects or not. I managed to bypass this to set my routers DHCP timeout from 1 week to 3 hours and it all went away. The network status showed periodic connect/reconnect during the problem so it might be a different prob than yours.
Peio64:
WM6 keeps WiFi connection asleep during sleep mode. Imagine the battery usage if it was connected to WiFi all the time. So be happy with that and beside it is usable. WiFi automatically tries to connect to the closest hot-spot if it was connected before each time you switch on. Normally it shouldn't take more than 5-10 seconds and the whole process can be followed on the top bar.
Mails: Use DirectPush and GPRS connection and e-mails will arrive instantly. Google for setting this up. With Wifi I dunno - if you schedule ActiveSync for a periodic check whether your WiFi will be used or a new GPRS connection. I think GPRS can be used while the device is asleep but I'm not sure. Someone should test this. Probably whichever is quicker to build up a connection will be used for data transfer. (Note: on some forum I read that if you disable GPRS auto check with a tweak battery will last longer so I guess this means that GPRS is always connected.
Regs, Cina.
Does your diamond obtain an IP adress from your router, and is the connection setup as 'connects to internet'?
cina said:
Hi there for both of you!
Peio64:
WM6 keeps WiFi connection asleep during sleep mode. Imagine the battery usage if it was connected to WiFi all the time. So be happy with that and beside it is usable. WiFi automatically tries to connect to the closest hot-spot if it was connected before each time you switch on. Normally it shouldn't take more than 5-10 seconds and the whole process can be followed on the top bar.
Mails: Use DirectPush and GPRS connection and e-mails will arrive instantly. Google for setting this up. With Wifi I dunno - if you schedule ActiveSync for a periodic check whether your WiFi will be used or a new GPRS connection. I think GPRS can be used while the device is asleep but I'm not sure. Someone should test this. Probably whichever is quicker to build up a connection will be used for data transfer. (Note: on some forum I read that if you disable GPRS auto check with a tweak battery will last longer so I guess this means that GPRS is always connected.
Regs, Cina.
Click to expand...
Click to collapse
Thank you for your answer,
I had a SE P1i before, and wifi was connected all the time with push mail. With the diamond and its weaker battery, I set up my mails schedule to connect every 15 min so wifi only needs to be active every 15min, even in sleep mode, I don't want it to be connected all the time this is of course a battery waste.
HSDPA is connecting in sleep mode there's no problem with that, I just wish to use wifi for mails when I'm at home as my data plan is unlimited for web surfing but only 10Mo/month for pop/imap connections.
BTW I don't use the "keylock" option, is it different from sleep mode in this case? I can't see the advantage of keylock versus sleep mode
I had an ETEN M600 for ages before and I found that for sync it always used GPRS even if WiFi was available. The cause for this was GPRS was available while device is asleep so it can start syncing immediately after wake up (does it needs to wake up for sync?). So you probably have to switch GPRS (HSDPA) off while you're at home.
Keylock is for locking hardware buttons and touchscreen while it is active. (You won't dial up anyone from your pocket). It has nothing to do with sleeping just if you set up the registry tweak the device get locked (Keylock software is started) if you press power to send it to sleep. (I've almost written "off" but it is obviously not true - you can switch it off with a long press on power = soft reset).
Hope this helped a bit.
Cina
Okay thank you, I checked and HSDPA is connecting every 15min in sleep mode even with wifi ON. If I switch data off I suppose nothing connects and no mail is received, which is I think it's a weird behaviour.
By the way, I have set my data connection to swich off 10 seconds after not being used, and it works perfectly and reconnects automatiquely when it needs to. But for the wifi I can find that option, it's stays connected all the time when I use the phone, even if I don't need to. Is it possible?
Maybe it's due to the fact that it's always checking if there are new networks? On Symbian UIQ3, you can pre-configure networks, give manually priorities for each networks (1.Wlan work, 2.Wlan home, 3.3G etc..) and for each application (web, mail, etc). When the phone connects it checks if the network "1" is available, if it's not it checks the network "2", and once it's connected it doesn't check anymore. Is there a WM6 advanced network tool like that?
(Sorry for my english)
I did the following and now it gets connected to the web:
I just changed parameter in settings -> connections -> wireless lan -> power mode -> "best performance" instead of "best battery".
I do not know why this needs to be done like this.
Thankyou all for resolving my problem
I'm experiencing problems connecting to my WL Router (DrayTek 2820n) using WiFi when the router is set to Auto instead of to a specific channel. I've noticed from some threads for other mobiles that people are exprience similar problems. Does anybody knows what is the story around which channels are supported on WiFi: 1-11, 1-12 or 1-13. My router is set to 13 by default. In addtion to that Diamond has problem to connect to some channels even in the 1-11 range. So how can I check, which channels are supported and for which region?
Edit: I did further testing and it became obvious that when using Auto channel selection on the router, Diamond wouldn't connect. When selecting manually any channel between 1-11 it works OK, but when selection channels 12-13 it stops working, which makes me believe that the Diamond doesn't have support for the channels for non-US regions.
Does anybody have any idea how to change wifi region to support 12-13 channels as well? So far I couldn't find anything on the net that would help me doing it. Is it possible that it might be WM 6.1 issue and not Diamond?
HI I am actually having a diffirent issue but still related to wi-fi. When my phone awakes from sleep, it promts me to connect to my wi-fi server at home, when it was already connected jus minutes before. I have to re-enter the pass phrase everytime it awakes from sleep. This does not seem normal as my 6.0 touch didnt do that.
Any takers on this?
For more channels, it depend of US version or EU version. You need to changer your firmware but the problem is that in France for Internet you use PPoA and Belgium PPoE and I do not know if in the US they use the same so you will probebly losse your ability to connect to the Internet. Having more channels is not interesting because you need a hope of 5 between channels ( ex : ch1 + 5 = ch 6 and ch6 + 5 = ch11) between ch1 and ch6 place a ch11 for avoiding interferances. In 802.11g that is a question of scheme.
Sorry for my poor English.
Problem connecting to home network wifi
Hi, i've been using diamond to connect to my wifi home network but since few days is not possible anymore even if nothing was changed in the settings of the router.
The phone recognize the network as available, i push connect, it comes connecting but instead of connecting to the netwok it goes back to available.
Password is correct and the setting are the same as few days ago.
Any idea which setting should be modified?
Thanks in advance!
Panco76
Hello everyone,
I have one problem with my diamond. I disabled the "data transfer" with the improved comm manager. I usually use wifi when i'm home, however, i've seen that even though wifi is active, HSDPA connection is activated as well so i got charged, this sometimes happens when updating weather data or downloading emails.
Anyone with the same problem?
Yes - having he same problem.
I have WIFI at home and at work - so i want to use GPRS only when i am outside. never managed to do this - except when i kill GPRS fully - and even then Opera, the weather and push-mail wont work. :-(
WiFi Channels 12-13?
I need to bump up this issue again.
I can't find anywhere in this forum how would you change your WiFi channel range from US to EU (i.e. 1-11 to 1-13). My Diamond was purchased in Australia and I was hoping that the new SW upgrade would rectify that, but it looks to me that's not the case. Any idea if that can be done in registry?
Thanks.
Change Channel range from 1-11 to 1-13
***Bump***
Has anybody got any ideas how to increase the channel range from 1-11 to 1-13?
Hi, I am having a seperate problem from all that are listed. I have the linksys rangeplus router, and my Diamond wont even detect my network when it searches, yet my computer and PS3 do fine. Can anyone help me?
another problem...
Hi,
i have a problem with the wifi on my Diamond aswell..
I have a router at home which is encrypted. When I try to connect to it, I type the encryption key and it says Connected but i cant surf any pages. When i go back to wifi settings my home network switches between Not available and Connecting...
However, when i remove the encryption, everything seems to work fine. Since i dont want to treat my neighbors with free internet, does anyone have any tips for me?
(it is set to Best performance... +i'm sure i enter the right key...)
Thanx
The same over here... I found out, that some of cooked ROMs had this problem, but official worked. Before I couldn't connect via WPA2-PSK AES, all other encryptions worked. Until now... I tried to flash official ROM and RADIO, but it doesn't work anymore. I'm pretty sure it must be hardware problem. I need to send my Diamond to get fixed, but... The closest repair centre is in Prague (GSMobile)
!!!!!!!!!!!!!BUT BE AWARE!!!!!!!!!!!
I owned previously Qtek8310. After I send them my Qtek to replace the joystick, it came back with broken motherboard... This repeated 3 times and everytime they broke something else. I've got my Qtek8310 back as a total crap, destroyed and scratched... I called and send a claim to HTC Europe in London, but nothing happened since then. I don't believe them anymore. If you love your Diamond avoid to get it fixed in GSMobile!
I use blackme to turn off the screen on my kaiser. But unlike on my HTC titan blackme also disables wifi when run. Is there a fix or reason for this. I thought blackme only turned off the screen and didn't standby the phone.
use battery status instead. or i just use gs players display off function.
Well I am not using a player while the screen is off. When I log with Navizon I like to turn the screen off to save battery or darken the car at night.
I now have also tried spshutxp and it doesn't keep wifi on either.
So are there not any other options?
the way you would do it is run battery status plug in your today screen. then when navizon is up and running hit the start buttion then hit home screen the on battery status hold the stylus down and go to display off. done.
This doesn't work either. When I turn the screen back on with the power button the wifi icon on the top is not there. After a couple seconds it pops back up.
Anyone else have any suggestions. Or am I over looking somethings in my previous tries.
i am also particular about having the option to leave wifi connected after putting the device to standby but it never really worked for me with wm6 and wm6.1 and i haven't tried any wm6.5 yet...
BUT!!! the ROM i am currently using (HyperDragon IV Rhodium April 10th, 2009 ROM) seems to be able to do exactly what the OP desires
before you go about changing your ROM, have you tried KaiserTweak and/or Advanced Config utilities??? i used KaiserTweak to enable the "Wifi standby mode" option...try this before considering changing your ROM but remember that i attempted enabling this setting in previous wm6 and wm6.1 ROMs and this is the first ROM on which i have observed the feature actually working
i have NOT properly tested this ability...what i did was the following:
1. enabled my wifi and allowed it to connect to my home router
2. on my desktop PC, i set up an infinite ping to my device's IP address
3. on my device, using VM Network Browser's ping utility, i set up an infinite ping to my desktop PC's IP address
4. once i saw the ping replies coming in on my device as well as my desktop PC, i pressed the power button on the right side of the device to put it in standby
5. i observed that the wifi LED goes off but my desktop PC continued to receive replies from my device
6. when i brought the device out of standby after about 30 seconds, i noticed that the wifi icon in the top bar still showed the wifi as connected AND i observed that VM Network Browser had continued to send pings and it continued to receive ping replies from my desktop PC in the duration that the device was in standby
also, using Resco Explorer on my device, i set up a file copy from a network share on my desktop PC and then i put the device into standby. after about 30 seconds, i brought the device out of standby and noticed that my file copy had progressed just fine as if the device never lost the wifi connection
all the evidence seems to point to success in my case
hope the above helps, good luck!
hey guys. The wifi on my phone doesnot turn on. When i click "turn wireless on" it turns on for a feew seconds but doesnt conect to any of the networks and just turns off by itself. It used to connect before but now i dont know hat is happening. i have checked and rechecked all the settings but no help. I have also downloaded other wifi apps but still nothing. Can some1 help plz???
talha0 said:
hey guys. The wifi on my phone doesnot turn on. When i click "turn wireless on" it turns on for a feew seconds but doesnt conect to any of the networks and just turns off by itself. It used to connect before but now i dont know hat is happening. i have checked and rechecked all the settings but no help. I have also downloaded other wifi apps but still nothing. Can some1 help plz???
Click to expand...
Click to collapse
is your phone off in comm manager?
is your phone connected to usb cable?
if your phone is off in comm manager then the "phone" icon will not be highlighted tap it or press it and should be highlighted
if your phone is connected to usb with "active sync" icon in comm manager highlighted then disconnected and try it
other then that well go to t-mobile and ask them to fix it hope it helped
hi all. i am on android 6.0.1 build 23.5.A.1.291. My problem is that my wifi keeps resetting and searching. i am traveling so its not my personal router that is an issue. my tablet and laptop connect to the same routers here without issue but my phone tries to connect various open connections but immediately resets all connections and starts searching for them again. occasionally it connects for a second. the same issue occurs if is set my tablet as a hotspot so i doubt it is related to the available connections. also for some reason i don't seem to have any advanced options anymore to tell the phone to sop scanning. Any help would be much appreciated. so far I tried turning airplane mode on and off as it seems have started at the airport, reset all network connections , general powering down and up etc. nothing seems to work.
hey, i know this post is quite old yet i only found it now facing exactly the same issue. it all started at my parents when phone was suddenly not able to connect (exclamation mark on wifi icon in status bar). i restarted router but it did not help. when i came home i faced the same issue. both routers are different, different provider, etc. before the weekend all worked fine so not really sure what happened. not the phone (z3c) keeps searching for wifi, displays the list for a few secs and searches again.
i tried what was suggested in other topics, like here:
https://forum.xda-developers.com/z3-compact/help/wifi-issues-z3c-marshmallow-fix-t3390859
or
https://forum.xda-developers.com/z3-compact/help/wifi-randomly-disconnecting-575-t3435244
but nothing helped. now considering to re-flash the latest firmware. trying my luck here before i do so.
current sw on 23.5.A.1.291
update:
1) i tried to repair the phone using Sony Companion .. did not help
2) flashed it with the latest sw .. did not help
in both cases sw version was D5803_23.5.A.1.291_1288-5411_R12D. when phone starts for the first time it shows wifi networks. but just for a while, that it starts "searching for wifi networks..". when i select my wifi network, fill in the password and click connect it says "failed to connect to network". i can already see on the background that the phone is again searching for wifi networks. if i try to connect at the right moment network is saved. but then it does not connect. or sometimes it does but "checking connection" takes ages and wifi symbol in top bar keeps appearing and disappearing. at the end it shows error message "could not connect to internet".
what could be the problem?
update 2:
https://www.youtube.com/watch?v=W2BE2PRljm0