Related
First of all, I install T-mobile clean 2.26, I recall the internet working and with activesync, cause I got sbsh weather updated. Dunno why now it does work on my gf phone. Then I bought a phone and install the T-mobile 2.26 and realize it didnt' work and mokiz version too, then I try Mr. Clean 2.24a, and still doesn't work.....any help would be great.
My home connection with PC.
Microsoft activesync 4.2 on telus DSL line. Try all these rom,
My 8125 CID lunlock ...not sure..I tried to unlock it but dont' know if I got it
IPL -1.08 SPL 2.25 ...try all these rom....Mr. Clean 2.24a, Mosik 2.26, Sumitter 2.24, T-Mobile 2.26.
My gf 8125 CID lock
IPL 2.x SPL 2.x too, try all the rom on hers too, same prob.
But I swear her phone could update the weather before cause i'm looking at it wiht only two days with weather but now I can't do it.??
I thought it was my computer setting cause one time my comp frozen and had to reboot and it was around the same time. So instead I tried on my brother labtop which he just formated so everything should be alright.
But I was still unable to connect to internet with Activesync or bluetoothl.
Please help ......big Cooks.
There's a checkbox in AS that lets you forward the connection... tried that?
I'm running the molski 2.26 rom and had a mr clean rom before, as well as some factory TMO/I-Mate/Qtek roms. Never had any problem connecting with AS.
Appreciate the help and reply.
Hi, tomasz
Thanxs for pointing that out, in AS, I went to connecting setting and found what you were saying, the section my computer is in automatic setting, but I also tried my computer is connected to internet. Still I get this error in IE when loading a webpage, "The page you are looking for cannot be found due to unkonwn error 0x80072f78".
I wouldn't be so annoy if I didn't have internet in the beginning, but when I first got my 8125. Everything works fine with Mr. Clean and T-Mobile rom, without touching any setting in my comp and the phone, AS works like a charm, internet thur AS work fine without any manual setting.?? I didn't know things can change so much all a sudden? I hope someone out there know exactly what the problem is? thanxs again for the post tomasz, hope you have another solution or someone out there does....
Q9100 half dead!!!
Hi pals..
Listen gotta a big problem with my Qtek 9100.This is it. I've tried to update the pda to spanish so I could sell it to a friend of mine.I've downloaded the 1.3.7.5 version from xda-dev.Everything was working fine but in the middle of the process the power in my house failed.So the process stoped now I got the damn OS in Spanish but it doesnt work because it didnt installed properly.I've tried out everything I new about this pda.That is try to install in bootload mode,the only thing I've managed was update the IPL and SPL (that I dont know what doest that means) for that I've used an Orange ROM,if it would have updated properly it would show up the W2k5 customised by Orange but no,it keeps stuck in the same Qtek welcome star up image.
What and I supposed to do? I heard that I could install it loading it direct from the SD Card but I have to do it by copying an Backup SD card already done once mine OS is damaged. I've already tried the one in Dutch on the XDA ftp web page.But it seems not to be working.
Regards
Luiz Santos
Finally got my internet working thur AS
Okay for anyone that is having problems with Internet working thur Activesync, you can try to go into start, setting, connections, usb to pc and uncheck enable advanced network functionality.
And it work for me, yahooooooooooo....
I was upgrading my t-mobile 8150(?) the k-jam with the new windows mobile 6 and in the middle of it my comp crashed!! now i am stuck at the bootloader mode (3 colored screen) and when i try to redo it i get to 99% and get a 302 error message. i follow the instructions given but keeps going in circles. its a G3 so is my phone bricked or is there a way to save it? i've been looking at this site all day but am now just more confused. lol thanks for your help!
No your phone isn't bricked. As long as you can get into the bootloader screen you should be ok. What you need to do is flash an official carrier rom either tmobile 2.26 or wizard love rom after you that than you can reflash to wm6. look at the stickies in the wizard forums that is where you can find these roms.
Thanks for the info but seems my techno curse continues. I tried the wizard love rom but it was in a different language and whem i tried the tmobile 2.26 i got "error 274 connection." Any more suggestions? Again thanks soo much for an issue I'm sure has been posted here a thouand times.
This happens to me all the time. I always use the Cingular 2.25 rom, it works perfectly and I have an I-mate K-JAM. Then, do the WM6 upgrade, but ensure all of your Norton and Antivirus and background running apps are shut down. Good luck.
yes also take out your mini sd card if you have one. even though its in another language it will work. "AVANTI means next. so just keep hitting that and you will be fine.
hmm been trying to d/l the Cingular 2.25 rom but the link seems to have stoped working...
It;s aaaaaaaaaaaaaaalllllllllliiiiiiiiiiivvvvvvvvvvvvvvvvveeeeeeeeeeeeeeeee!!! for now lol Lets see what happens after i install wm6 I couldn't get the cingular rom but i had already dowbloaded the button rom i found here earlier and it worked like a dream!! quick and easy!! thank you all soooooo much!
hi all. one more little thing. after adding the new rom to get it back to life, now the numbers don't match so i can't upgrade to wm6. i have ipl 1.01 spl 2.26. advice?
flash to the tmo 2.26 or cingular 2.25...that will give you an IPL/SPL of 2.xx
then, you can flash to WM6
i want to delete this message. can't find a way to do it.
there's any other way to flash without usb cable?? sorry to bug in this thread but i lost my usb connection somehow and did a hard reset and still doesn't work. my phone charges. and no is not my computer cuz my wifes phone same as mine does sync i have a tmobile mda also known as the cingular 8125.
fallon75 said:
hi all. one more little thing. after adding the new rom to get it back to life, now the numbers don't match so i can't upgrade to wm6. i have ipl 1.01 spl 2.26. advice?
Click to expand...
Click to collapse
keep reflashing buttons rom until both ipl/spl are the same number. if they are different, then the flash didn't complete correctly. (it happens often, so it's kinda normal). just keep reflashing. after both ipl/spl are the same, then CID unlock and then update to an official carrier...then flash a wm6.
can anyone help me??
Check if "USB" displayed when in bootloader mode (Camera+reset) with Wizard connected to PC.
If so, you may try to flash another ROM through bootloader.
starkwong said:
Check if "USB" displayed when in bootloader mode (Camera+reset) with Wizard connected to PC.
If so, you may try to flash another ROM through bootloader.
Click to expand...
Click to collapse
it does shows but how can i flash?? it still won't connect o my pc. my pc doesn't recognize it. but it does recognize my wifes phone.
Try to run RUU straight with Wizard connected and running in bootloader mode
Since I've upgraded to the official AT&T WM6, I was having problems with reception. Therefore I decided to upgrade my radio. When I looked around, I found out that the Hermes radio would work with the treo. Therefore I downloaded 1.54.00 radio for hermes from this site, put it on my mini sd card, renamed it to cheeimg.nbh, and updated my radio (btw my phone has oli's hardspl). Now my phone gets stuck after booting and I have no reception. I cannot even do anything with the phone. It simply freezes at the today screen. I tried to flash the originial WM6 rom back via mini sd and still no luck. Did I mess my phone up for good? Can I somewhat fix it?
Real CREFULLY ALL thred about Hard-SPL. Problem with Herm rdio was described. AFAIR there's no solution (hope I'm wrong).
I apparently missed it. What exactly is the problem? Can I go back to the normal (original) bootloader?
I was mistakenly copy the wrong rom into the SD card and run the cheetah unlocker - it starts to flash the rom. After that the TREO750 is dead and soft & hard reset will not help.
I can only go into the bootloader with 3 color screen. Pressing PTT and reset button.
Anything i can do to make this TREO750 work again ?
ojtan said:
I was mistakenly copy the wrong rom into the SD card and run the cheetah unlocker - it starts to flash the rom. After that the TREO750 is dead and soft & hard reset will not help.
I can only go into the bootloader with 3 color screen. Pressing PTT and reset button.
Anything i can do to make this TREO750 work again ?
Click to expand...
Click to collapse
If you can access the tri-color bootloader screen, then your Treo 750 is NOT dead.
The ROM is bad or wiped but the bootloader is good...that is sufficient for you to flash a good ROM & get it up & running.
What do you see on the bootloader screen?
Which ROM did you copy into the mini-SD card?
You could copy the .nbh file from the original WM6 ROM Upgrade package & change it to CHEEIMG.nbh into a freshly formatted (FAT32) mini-SD card & flash using the mini-SD card method.
thanks konker. I finally figure out the way to flash it with original ROM.
ojtan said:
thanks konker. I finally figure out the way to flash it with original ROM.
Click to expand...
Click to collapse
Great! I'm glad you got your phone working again.
glad to know its working again
Hi everyone,
I have a big problem and I need urgent help please. I have ATT 750 unlocked and I'm outside the States now. My Treo was 6.0 then I upgrade it to 6.1 so far so good.
Then I saw a custom rom that I thought it was interesting. the custom rom was for HTC Dimond I think. without paying too much attention. I started the upgrade. It went 70% before the upgrade crashed.
Now my Treo is not responding to anything. I have the original ATT 6.0 SD upgrade and I have the 6.1 lite upgrade. I'm using CheetahUnlocker to flash the SPL (that is working) but when I try to install the 6.0 or 6.1 using Kaiser Custom RUU v1 it crash.
I saw the post above that suggest to place the original 6.0 on a freshly formated SD and install from there. that is not working either. when I try to install the software it goes into these steps before it crashes: btw, I have the tri-color bar and it has the following info:
CHEE100
IPL-0.20
SPL-1.40.01iNex
while update in progress i see the following:
CHEEIMG.nbh
SPLASH1 - OK
BOOTLOADER - OK
GSM - OK
MicroP - OK
EXTROM - Fail
OS -
After the crash I get this msg: "Update Terminate Update Failed"
Any suggestion please? need more info? then let me know
Thanks in advance
Sam
Any answer
Hello Sam,
I actually had the same problem, did you get it fixed?
Please let me know, how?
Thanks a lot
Same problem here
In the 3 colored screen just displays this.
Palm Tr
IPL-0.20
Palm Tr
SPL-0.21.0000
When i insert the freshly Fat32 formatted SD card with the rom , apears "loading" for about 2 seconds and then just ends with the tricolored display.
Thanks for any advice.
Apoapo said:
Same problem here
In the 3 colored screen just displays this.
Palm Tr
IPL-0.20
Palm Tr
SPL-0.21.0000
When i insert the freshly Fat32 formatted SD card with the rom , apears "loading" for about 2 seconds and then just ends with the tricolored display.
Thanks for any advice.
Click to expand...
Click to collapse
You need to run Hard SPL first before flashing any ROM.
Your display would look like safisam's if you had run Hard SPL. (SPL-1.40.01iNex)
safisam said:
Hi everyone,
I have a big problem and I need urgent help please. I have ATT 750 unlocked and I'm outside the States now. My Treo was 6.0 then I upgrade it to 6.1 so far so good.
Then I saw a custom rom that I thought it was interesting. the custom rom was for HTC Dimond I think. without paying too much attention. I started the upgrade. It went 70% before the upgrade crashed.
Now my Treo is not responding to anything. I have the original ATT 6.0 SD upgrade and I have the 6.1 lite upgrade. I'm using CheetahUnlocker to flash the SPL (that is working) but when I try to install the 6.0 or 6.1 using Kaiser Custom RUU v1 it crash.
I saw the post above that suggest to place the original 6.0 on a freshly formated SD and install from there. that is not working either. when I try to install the software it goes into these steps before it crashes: btw, I have the tri-color bar and it has the following info:
CHEE100
IPL-0.20
SPL-1.40.01iNex
while update in progress i see the following:
CHEEIMG.nbh
SPLASH1 - OK
BOOTLOADER - OK
GSM - OK
MicroP - OK
EXTROM - Fail
OS -
After the crash I get this msg: "Update Terminate Update Failed"
Any suggestion please? need more info? then let me know
Thanks in advance
Sam
Click to expand...
Click to collapse
Have you tried re-downloading the ROM in case you have a bad file? Also, have you tried a different SD card, or re-formatting the SD card you are using? Sometimes that will help, and make sure the CHEIMG file is the only file on the SD card.
startngate said:
You need to run Hard SPL first before flashing any ROM.
Your display would look like safisam's if you had run Hard SPL. (SPL-1.40.01iNex)
Click to expand...
Click to collapse
Thanks man, i was looking for any way to HARD SPL directly from the older loader, i couldn't find any.
But i already solved loading in the SD card an "original" ROM from palm.
Now i got this treo working again
Hi all
I have the same problem, after some progress during the update it stops and now I can see just the Palm logo inicialyzing...
I stil can get the Bootloader Screen (3 collors), but when I try to pass other ROM It says "file image corrupted"...
I´ve been trying with 4 SD card that I have (512Mbs up to 2Giga), but nothing works...
It seems that the Treo doesn´t recognize the SD card!!!!
How could I Pass a ROM not using the SD card??
Any help??
Palm treo 750 storage memory problem after flashing!Please help
Please help me!!!!!!!I have occurred this problem in my Palm treo 750 after flashing:i get this
message error:"Storage memory is critically low.i the storage momory is not increased. other
programs may not be able to star.Use file explorer to delete files that are no longer needed or
move some files to strage card".
And when i look the memory storge i see only:
-4.82 MB(Tatal memory storage)
-2.3MB in use and
1.78MB free
And like you know the real total memory storage is: 60MB.
Please help me!!!!!!It happen after i update it to Wm6.1
And hard reset, soft reset don't help.Help please!!!!!!!!
darabah said:
Please help me!!!!!!!I have occurred this problem in my Palm treo 750 after flashing:i get this
message error:"Storage memory is critically low.i the storage momory is not increased. other
programs may not be able to star.Use file explorer to delete files that are no longer needed or
move some files to strage card".
And when i look the memory storge i see only:
-4.82 MB(Tatal memory storage)
-2.3MB in use and
1.78MB free
And like you know the real total memory storage is: 60MB.
Please help me!!!!!!It happen after i update it to Wm6.1
And hard reset, soft reset don't help.Help please!!!!!!!!
Click to expand...
Click to collapse
First of all, please indicate which ROM you loaded on your device.
Secondly, it would help the community to help you if you could state what software modifications you've performed on the phone. eg. HardSPL etc
Lastly, a list of installed software on your phone would be useful too.
Palm treo 750 storage memory problem after flashing!Please help
I had windows mobile6 Treo 750 2.27 ce os 5.2.1239(build 17746.0.2.4) original and i update to 6.1 Treo750_OS5_2_19199WWE_STD.rar. i used CheetahUnlocker, MAGIC_UNLOCKER and Treo750v_ExtROM_Unlockers with SD method
Like it descripted to the forum.
Plaese help me! Thank you for your reply!!!!!
darabah said:
I had windows mobile6 Treo 750 2.27 ce os 5.2.1239(build 17746.0.2.4) original and i update to 6.1 Treo750_OS5_2_19199WWE_STD.rar. i used CheetahUnlocker, MAGIC_UNLOCKER and Treo750v_ExtROM_Unlockers with SD method
Like it descripted to the forum.
Plaese help me! Thank you for your reply!!!!!
Click to expand...
Click to collapse
From your description, it seems both of them are original stock ROM. Is your Treo a telco branded model or a unbranded unlocked model?
If the latter, you did not have to run the other utilities to unlock the phone...just flash the ROM.
I see that you ran the ExtROM unlocker...why did you have to do that?
The ExtROM is used to store device specific ROM customization that you should not have to bother too much if your ROM is a unbranded ROM (ie. not AT&T ROM etc).
If you left the ExtROM in it's unhidden state, that could be why the system is reporting the amount of free space to be so low. You should hide the ExtROM & then hard-reset the device again to see if that solves the problem.
Palm treo 750 storage memory problem after flashing!Please help
Thank u for your reply!
My Treo is unlocked model but i don't know if it is unbranded and it is from Palm Rom not AT&T ROM.
I'm news, can u tell me how to hide the ExtROM(Can u explain how to proced please?).
Thant u for all!!!!!
Ok I've been doing searching on the forum and find there are quite a few ROMs to update the WM OS. I want to upgrade from WM5 to WM6. I have a Treo 750 cingular phone which is unlocked. I'm currently using Tmobile on it. What is the latest but stable ROM that I can use for WM6? I am unsure as to which to go with. I am also in the US if that isn't apparent.
Thanks a lot!
AT&T provided a stable WM6 ROM a long time ago. If you want stable and don't want to mess around with cooked ROMs, that would be your best bet.
You can find it here (along with many others):
http://forum.xda-developers.com/showthread.php?t=335402
It's the first one on the list.
Personally, I am using the cooked WM6.1 ROM (not the 'lite' version). It's pretty good in the stability department, but I find myself doing soft resets more often than on the AT&T WM6 ROM.
The links are dead to the generic rom on that link you provided. However, my phone is unlocked. If I upgrade using ATT stable release from ATT themselves will I have to unlock the phone again?
http://750.teamus.us/wm6/
tristanstewart said:
http://750.teamus.us/wm6/
Click to expand...
Click to collapse
Thanx for the link, but when I try the PC upgrade, even though I am plugged into my 750 via USB, a error message says that I am not connected. I tried two good cables, and the same message is displayed. Any ideas?
hello, do you know how well this runs on the treo? i've updated my bj2 to wm6.1 and it ran kinda laggy
well... after upgrading to wm6 my initial thoughts are that its not tooo shabby at all. thanks for the link dood.
awitz said:
Thanx for the link, but when I try the PC upgrade, even though I am plugged into my 750 via USB, a error message says that I am not connected. I tried two good cables, and the same message is displayed. Any ideas?
Click to expand...
Click to collapse
not a clue, man. i used the mini sd update.
duswdav said:
well... after upgrading to wm6 my initial thoughts are that its not tooo shabby at all. thanks for the link dood.
Click to expand...
Click to collapse
not a problem. it took me a good while to find the links myself. i found them here somewhere, but cant recall exactly where.
awitz said:
Thanx for the link, but when I try the PC upgrade, even though I am plugged into my 750 via USB, a error message says that I am not connected. I tried two good cables, and the same message is displayed. Any ideas?
Click to expand...
Click to collapse
make sure its connecting to activesync
awitz said:
Thanx for the link, but when I try the PC upgrade, even though I am plugged into my 750 via USB, a error message says that I am not connected. I tried two good cables, and the same message is displayed. Any ideas?
Click to expand...
Click to collapse
I had same error. What i did was to disable the antivirus and then it worked perfect.
treo 750 offical update help
now this sounds like it should be a real simple thing yet my treo seems very stubborn. what gives? heres my story;
(device= treo 750 at&t bone stock(no mods) locked wm5.
7›4hard reset (okay)
7›4unzip contents of sdupdater downloaded off mytreo.net(okay)
7›4put contents in root cheeimg.nhb, cheeimg.??? (32 b) folder i think 2257 or close to that. (okay)
7›4hold ptt & press pin reset(okay)
7›4two outcomes here:
-4gb sdhc fat32= stuck on tri color screen says; cheeta
IPL-0.20
cheetah MFG
SPL-0.14
and it stays there
then with 1gb microsd fat32 it does all above then flashes a white screen says updating in red letters with some numbers (hex address?) for like 2sec and pops back to tri color screen and says serial at bottom.
do i have the wrong ROM ver?
hard reset and im kewl in wm5. please tell me i do not have to do that hard-spl thing. i though this was officail at&t rom. i have no access to a computer only other pocketpcs. please help