** UPDATED **
PLAzmA's Sliding Sound Pack for TYTN II (Kaiser) and windows mobile phones with slide out keyboards
*Note: only use the NUMBERED CAB files to install if you are using a TYTN II Phone or if you have the standard HTC Sliding sound system built into your rom. If however on phones like the HTC Wizard where no sliding sound is currently present, install the SlidingSound.cab file, and then launch the program and assign the files manually. The Numbered CAB files will not work for the older phone method.
List Of WAV FILES USED:
0 : Wind Chimes
1 : Piano
2 : Xylophone
3 : Futurama Bender
4 : Might Boosh
5 : Startrek TOS
6 : Dalek
7 : Cash Register
8 : Electricity
9 : Electric Motor
10: Hal 2001
11: POP
METHOD 1: TO INSTALL NEW HTC PHONES LIKE KAISER BY CAB FILES:
This is really easy pick one of the numbered install files from "Kaiser - Modern Phones CAB Install Files.rar", you can either install the complete pack or just one of the sounds, however as it must have a constant number sequence in the registry, its programmed to replace the 3 base sounds in every pack. This is to ensure that the pack works correctly despite possible older mods. This means if you remove a pack it will also take the 3 base sounds with it, however at any time you want to go back run the htc base sounds pack, make sure you first uninstall the previous pack completely and the run the base pack install cab.
*Note: above numbered cab method only for newer phones with htc slide service like the kaiser, DONOT install onto older phones like wizard as this will not work see the next method.
METHOD 2: TO INSTALL BY ADD ON SLIDINGSOUND.CAB METHOD TO OLDER PHONES:
Install cab file and run sliding sound program, turn on slide detect service and assign wav files manually, refer to the list above for the appropriate numbers, there are two files to select from a simple "SlideSound.cab" file which just has a basic pop noise, additional sounds will need to be install manually, or to install the program and sounds all in one go, install the "SlideSound - All Sounds.cab"
*Note: above cab method is only for phones without the htc sliding sounds program built into your rom and only required on older phones like the herms, wizard etc..
R°CK ON PLAzmA 2008
Download is at :
http://rapidshare.com/files/93019505/PLAzmAs_Sliding_Sound_pack_for_Windows_Mobile_V2.rar.html
http://www.megaupload.com/?d=KXSPHM0Q
Funny. I installed the Startrek Communicator sound alone. Real nice.
Rapidshare link down???
Hi:
Thanks for posting this!
Sorry for the dumb question. Do I copy just the wav files to Windows, or the reg files also? If not, where do I need to place the reg files (I want to install all sounds)? I placed the All Sounds file in My Documents, and clicked on it, it opened reg editor, but did not seem to apply changes, as they are still not visible under sliding sounds.
Thanks so much for the help.
when i try to open the all sliding sounds.reg i get the message "The specified file is not a registry script" please advise
To import registry file you need phm reg edit.
PHM Registry Editor
http://www.phm.lu/products/PocketPC/RegEdit/
Try installing this and then open the file again
plazma247 said:
PHM Registry Editor
http://www.phm.lu/products/PocketPC/RegEdit/
Try installing this and then open the file again
Click to expand...
Click to collapse
Hi Plazma:
I do have PHM Reg Editor.
I copied the all sounds file to my documents, and clicked on it, which did open PHM reg editor, but it didn't seem to make any changes. The sliding sounds are still not visible in settings etc. I have soft reset etc. and I still do not see the new sounds. Should they be visible in the standard sliding sound settings?
Any idea what I could be doing wrong? Do I maybe need to have all the reg files on phone, or is it enough to use all sounds only?
Thanks again!
Check new install
cincy1020 said:
Hi Plazma:
I do have PHM Reg Editor.
I copied the all sounds file to my documents, and clicked on it, which did open PHM reg editor, but it didn't seem to make any changes. The sliding sounds are still not visible in settings etc. I have soft reset etc. and I still do not see the new sounds. Should they be visible in the standard sliding sound settings?
Any idea what I could be doing wrong? Do I maybe need to have all the reg files on phone, or is it enough to use all sounds only?
Thanks again!
Click to expand...
Click to collapse
Ok to make it even easier ive stuffed it all into cab format installer for you see first post.
plazma247 said:
Ok to make it even easier ive stuffed it all into cab format installer for you see first post.
Click to expand...
Click to collapse
Worked Perfectly!
Thanks so much, I was VERY sick of the piano sound
hi all,
Any chance of uploading it elsewhere other than rapishare or megaupload? Preferably mediafire or yourfilehost? Thanks ya!
Uninstall?
I have uninstalled this after I tried to make it work on my X1 (but failed) using the second option, and I am presented with an error at startup that it could not find slidesound.exe. I have checked the registry and cannot find anything in there. Any ideas??
Thanks
Worked fantastically on my Tilt 2. I love the Dalek one
Related
Want to create your own keyboard sliding sounds?WM6 comes with three by default, and you can't add custom ones...
Or can you?
Using a registry editor, nav to:
\HKLM\Software\HTC\SlidingSound
There are 3 keys: 0,1, and 2. These represent the three current sounds: piano, xylophone, and whatever the third is.
Make a copy of one of these and name it 4. Inside 4, set Default to the name for your sound. Then make the In and Out point to the appropriate wav's in the Windows directory.
Soft reset your device, then go to Start > Settings > Keyboard Sliding Sounds. Your new entry should appear in the list.
Hope it helps!!
Ryan
And do you have cool sliding sounds for download. I already searching a long time for cool ones.
Regards, Tommy
Yeap Indeed, Can someone please link us some sliding sounds??it would be very helpfull for the p4350 community
Well, after downloading a bunch of free sound FX, I've chopped them up and sped them up/slowed them down... Here's a few to try. I think they're pretty cool, better than the built in ones at least...
Ryan
I know ya gotta love the Transformers.
the transformers sounds are really cool. i did speed them uip slightly and lowered the volume
guys...what am I doing wrong here? total commander won't allow me to copy or past in any of the directories?
I followed the above steps...but when it comes down to it...I can use the "copy/move" ....but then it won't allow mw to paste.
I also can't copy my sound from my mem card to any windows directory.
I'm totally new to WM and making mods to my WING...any help would be greatly appreciated!
Cheers!
yeah i dont understand how this works either do you guys think you can make more explained instructions thanx
VooDoo1 said:
guys...what am I doing wrong here? total commander won't allow me to copy or past in any of the directories?
I followed the above steps...but when it comes down to it...I can use the "copy/move" ....but then it won't allow mw to paste.
I also can't copy my sound from my mem card to any windows directory.
I'm totally new to WM and making mods to my WING...any help would be greatly appreciated!
Cheers!
Click to expand...
Click to collapse
It seems like you try to make a classical PPC copy paste by the tap and hold and you're not supposed to act that way.
Be sure to use the Copy/Move option in the File menu to do so.
Good luck.
Googeling for star trek original series door sound.... psssscheek
foxenesys said:
It seems like you try to make a classical PPC copy paste by the tap and hold and you're not supposed to act that way.
Be sure to use the Copy/Move option in the File menu to do so.
Good luck.
Click to expand...
Click to collapse
I did try the copy/move option...still not working? Let me ask you guys this, once I select the item...and then do copy/move...and find the place where I want it to be...how do I then put it in that spot?
Im getting really frustrated because I dont understand what Im doing...I love my Wing tooo much to give up though!
Blaah...this is what happens when you go from Linux phones to WM..haha
hey
DaMyth said:
I know ya gotta love the Transformers.
Click to expand...
Click to collapse
i love the sound effects! thanks a lot dude!
Why not just edit the already existing sound effects.. like inside the folder 0 you can edit the in and out entries.. like on my hermes I edited '0' folder in registry to be the transformers sound by editing in with value data of my documets/slider4_in.wav and out with my documents/slider4_out.wave
For those having trouble following this guide, I have one at the HoFo Forums. Should be real easy to follow.
http://www.howardforums.com/showthread.php?t=1195063&highlight=Sliding+Sound+Guide
My Take
For those of you who are having trouble creating amd understanding the reg file, any easy way to do it is to just edit the ones already listed. That really is just the easiest. Just make sure you copy your wav files into the Windows folder on your device. And for a treat, my sounds; a Lightsaber!
VooDoo1 said:
guys...what am I doing wrong here? total commander won't allow me to copy or past in any of the directories?
I followed the above steps...but when it comes down to it...I can use the "copy/move" ....but then it won't allow mw to paste.
I also can't copy my sound from my mem card to any windows directory.
I'm totally new to WM and making mods to my WING...any help would be greatly appreciated!
Cheers!
Click to expand...
Click to collapse
i guess the easiest way is to
1) download the wav-files and rename then to 3_in.wav and 3_out.wav (the number 3 depends on the number of previously installed sounds)
2) edit the registry on your device (as instructed in the 1st post)
3) connect to activesync.
4) explore your device, go to the windows directory (on the device). and then copy the .wav files into the windows directory.
5) restart the device
6) edit sliding sound settings and it should work
WTF...am I doing wrong
Try as I might (I am regedit savy!) I still can't get this trick / hack / addon to work.
Reg settings seem fine, softreset...nothing...???? WHY
Sound files in windows work perfectly as I've run them directly from a command line address so I know they are pointed to correctly within the 2 paths.
Any help would be appreciated.
SHORTCUT
i first copy original wav to sd. then use the rename trick. right click on original name and select rename. then using the touch screen keyboard press the ctrl key + c. then take the sound u want to use and right click it and select rename. then use touch screen keyboard and press ctrl key + v. now that u have rename ur new sounds with the original name, hightlight both in and out sounds and copy them too the windows folder, overwritting original sound. then go to settings and change sliding keyboardsounds with the original name of one u over written.
are there any programs to allow for slider sounds for the mda???
i have the star trek sounds PM me if you want tehm
As always, another newb question. If there is a thread for this already, please let me know.
I need some more space for software. Mainly because I need for these to start on every boot and are today add ins. How can I remove some HTC extras I don´t need? For example:
1. The audio manager which I don´t like at all
2. The voice dial feature which I never used because I´m more into voice Command.
3. The Zip program which I replaced with Resco explorer
4. The old home pluggin which I replaced with Battery Status.
5. The Dialer skin which I replaced with the original WM6, which I consider better.
If I have to do this manually, its fine, I just need to know where to go and what to get rid of.
Thanks Guys.
Not too sure
I'm not too sure if this would work, but if you could find cab files of the programs you want to remove, and install them (stay with me) I would guess it would overwrie the files, and also allow you to remove them from the add/remove programs window under settings. I know for me, that worked when I updated Live Search from 1.0 to 2.0 and then deleted it. Give it a shot, what do you have to lose?
It could
It does sound reasonable. The question would be where to get these cab files. Anybody know where?
Though there is a strong posibility it won´t work. Some of these programs are upgrades. For example, I installed the new x button feature I found here as an upgrade. When I uninstalled the upgrade, it automatically returned to the old version. I tried it because I wanted SPB pocket plus to be my close button software. Tried it too with the Audio Manger installing the upgrade found here and the same happened.
Thanks.
1. to 4 are in ROM, you carn't just delete it.
5. Delete reg keys under HKEY_LOCAL_MACHINE\Software\HTC\PhoneCanvas & set HKEY_LOCAL_MACHINE\Security\Phone\Skin\Enabled=0, it should then return to the default windows mobile dialer. This file has a backup of the key just in case you want to restore it.
You can remove 1 - 4 if you cook your own rom, have a search in the forums.
I'm looking for a program which will let me text someone using a standard mobile keypad...does anyone know if this is possible to do or even better, program which is already out there somehwre.
I have had a look via Google and on this site but not had any luck :-(
xx
I really like tengothumb. check it out. it has 6 buttons instead of 9 like a cellphone pad, but its still realllyyy fast.
I personally use touchpal pro. Find at www.cooltek.com Or try using Phonepad.
please let me note if this file is infringing anything, I extracted it from my WM5 Rom.
Anyway, hope I could help.
diigibio (diigimatrix)
To install on such devices as "Universal" just use .cab
Any other install .cab then extract all files from zip, highlight them and copy them to the devices /windows folder replacing the originals.
Thanks babe...I couldn't get either of the programs you downloaded to work but managed to get PhonePad on and it works fine - exactly what I wanted!
xx
This is a fantastic keypad!! But when i copy the folder of the language and i start IntelliPadOpt.exe the first option is missing, is not visible. Is visible only the square. Because? Is normal? The first time the option was visible, but second time the option there wasn't visible
I'm trying to use Sashimi auto installer, but I can't find the registration key for these software in the registry... Anyone know a fast way to find them?
- Anton Tomov Pocket Mechanic
- DinarSoft.MemMaid.v2.3.Build.230
- PPCLink HiCalc v2.5.1
- Resco Explorer 2008 v7.05
- Resco.KeyBoard.Pro.v5.01
- Resco Registry Add-in
- z2remote v1.2
Not that important
- Resco Audio Recorder
- Makayama.com Pocket Live TV
- Astraware Solitaire
- Glu Mobile Super Slam Ping Pong
- Hexacto Soccer
I'm not asking for the registry key (that's illegal). I'm asking for the registry of these softs which I've already installed and registered in my device.
The only thing i can think of (and im taking a long shot) is download a registry editor and use it to see if there is a folder with the registration there.
Can you dump the registry, before and after the registration and then compare the Hive using something like Winmerge?
I keep meaning to this my self, but never have time
Ta
Dave
DaveShaw said:
Can you dump the registry, before and after the registration and then compare the Hive using something like Winmerge?
I keep meaning to this my self, but never have time
Ta
Dave
Click to expand...
Click to collapse
Some mod Suggested me to do the samething, but I don't quite understand how to do that.
So I have to backup all the REG in 1 reg file, then install my program, then do another Full REG backup and finally compare them?
Isn't it way too much especially the *.reg file is like 0 000001000 021? What do you mean by comparing the Hive? can I just like compare the folder name?
pandaboyy said:
Some mod Suggested me to do the samething, but I don't quite understand how to do that.
So I have to backup all the REG in 1 reg file, then install my program, then do another Full REG backup and finally compare them?
Isn't it way too much especially the *.reg file is like 0 000001000 021? What do you mean by comparing the Hive? can I just like compare the folder name?
Click to expand...
Click to collapse
The Hive is just another name for the whole Registry.
If you have two .reg files they should be plain text and easy to read. Find and download WinMerge and just use it to compare the two reg files. The difference is the probably going to be the registration data.
Ta
Dave
Havent done this for a while, but I used to use SKtracker. Basically it makes a log of your registry. Then apply the registration and run sktracker again. It will then compare the two logs and list everything that has changed.
look under HKLM\software, HKCU\Software
prabh said:
look under HKLM\software, HKCU\Software
Click to expand...
Click to collapse
Is it a good idea if I put all the cab in the CAB folder and the full registry backup file into the REG folder, instead of making 1 reg for each cab?
The only problem I can see here is if I switched to a completely new Rom. So if I make 2 registry backup files for HKLM\software and HKCU\Software, it should do the trick right?
Hey guys. Well, I have the HTC Fuze (aka Touch Pro) and I love to use the slide-out keyboard. Well, using it with the latest HTC Youtube Application (v1.6.1820.4128), I found that the orientation did not switch and that a thin white rectangle would appear on the screen to show me what I typed. I think that those of us with this agree that it looks ugly.
I did a bit of tinkering and found that the Youtube.exe in the latest version does not orient Search to landscape properly on the Touch Pro. The only version that seems to do this properly is the one from the Diamond. To get the benefits of both worlds (latest Youtube and working landscape Search) all we need is the Youtube.exe from the previous version. No need to change any other files or add/delete registry entries.
Needed File: http://www.megaupload.com/?d=E8OM7PD4
Solution:
1. Go to your device's Windows folder and backup the original Youtube.exe.
2. Replace the original exe with the one you downloaded. Use TotalCommander or any other program that lets you edit system files. Overwrite if prompted. If you are unable to replace the file, soft reset your device and try again.
Now enjoy!
The only disadvantage of the Youtube.exe from the older version is that the Program Guide will not appear if you do not have any custom favorites/channels added. If you do add a custom favorite/channel, the Program Guide will appear like it did in the original HTC Youtube, but the Auto &Vehicles channel will give the error "No Videos Found". Anything you add will start at #13 and count up (14, 15 ,16, ...).
Program Guide Style Editing (If you do not want the default channels)
1. Use your favorite Registry Editor and navigate to
HKLM\Software\HTC\Youtube
2. Now inside this, find the ProgramGuideStyle key and change its value from 1 to 0. Hexadecimal or Decimal doesn't matter since 0 is the same in both number systems.
Now you will have a Program Guide whose only default channel will be "All Videos" and anything you add will start at 2 and count up (3,4,5, ...).
Needed File: http://www.megaupload.com/?d=E8OM7PD4
The above file was uploaded from a virus/spyware free system. However, I cannot guarantee that you will download a virus/spyware free file, so PLEASE SCAN THE FILE AFTER YOU DOWNLOAD to make sure it is virus/spyware free.
Hope this helps!
This is great!! That bug has been annoying the heck out of me for God knows how long!!