Related
Hi All,
Welcome to the Rom-Packer "Squeezer" module!
This was originally included with my Wizard Rom-Packer kitchen, but as the technology is applicable to most programs installed in the Wizard (or actually most devices), in either storage memory or SD card, I have decided to release it to the wider community of non-cookers.
This program uses the open source program UPX to compress .exe files. The compression is quite remarkable. Generally the files end up less than half their original size. I have tested the process on all the main Office programs, and they work fine. The loading speed of the programs is actually improved, because the storage memory is so much slower than ram memory, so the time gained by transferring a smaller amount of data from the storage memory to ram when you run the program is more than enough to make up for the time spent uncompressing in ram.
The larger programs really seem to "pop" in comparison. Besides the Office programs, I have tested it on apps such as: eWallet, iSilo, ListPro, and Skype and found it works well, speeding load times with a smaller storage and SD card footprint.
The process "may" work with some .dll files as well, but I haven't tested them as extensively. A few programs will not work well in this mode, or refuse to load, so keep the original copies as backups. You will also find a few programs (adobe reader, pocketXpdf) which have already been compressed with this technology!
So, here's what you do:
1) Make sure the original program is installed correctly.
2) Locate the .exe file which was installed in Program Files in your PDA or the SD card.
3) Save a copy of this file somewhere in case it doesn't work.
4) Copy all the .exe files you want to compress into the SqueezeRoom directory.
5) Run Squeezem.bat
6) Take the compressed files out of the SqueezeRoom directory and replace the originals with those.
7) Run the program in the usual way. If all is well, Great! you're done!
8) If there's a problem, you can try a soft-reset before undoing the experiment.
9) If that doesn't help, copy the copy you made in step 3 back to the original location, overwriting the compressed copy.
Of course, I strongly recommend that you run a good backup utility, such as SPB backup, before beginning, just in case you make a big mistake somewhere.
Rapidshare Link: http://rapidshare.com/files/33717970/Rom-Packer_Squeezer.rar
Have fun!
Have you tried compressing dll files before?? I read the readme file...but since you wrote it, have you tested them.
Re: dll files
freeyayo50 said:
Have you tried compressing dll files before?? I read the readme file...but since you wrote it, have you tested them.
Click to expand...
Click to collapse
I tried one, but it didn't work. According to the UPX documentation it sometimes works on .dll files, so if you find a large one it works with, let us know!
Regards,
This program is amazing!!! I can see a notable increase in performance on my device. I compressed about almost all my apps (about 25-30 exe's) and about 5-8 dll's. So far the dll's that I have compressed have been working.
You can see a huge increase in performance the bigger the exe file is. Apps like Wisbar/WAD start up about 3-4 sec faster,
Opera about 3 sec (4MB compressed down to 1.7MB)
AIM 2 sec faster
Camera.exe maybe 1 sec (I couldn't really tell the difference)
Verichat 2 sec
FoxitReader 2-3 sec
IM+ 3-4 sec
SPB Imageer 2-3 sec
Resco Radio 2 sec
Total Commander 1-2 sec
Midlet Manager(jmm.exe) 2 sec faster
and calculator.exe seems to pop open .
When it comes to games, which usually are 2-4MB in size, they open 4-7 sec faster than normal. One of my games was 4MB than shrunk down to about 1.4MB after compressed.
This program also saves a crazy amount of space as well. My main memory free space before was 6.5MB, than after compression, increased to 11.8MB
It also seems like there is more free RAM than normal, but I'm still veiwing that. Posted some SS of compressed file sizes.
I just discovered that .cpl(Control Panel Extension) files can also be compressed. I just compressed SoftKeyAppletEx.cpl and ThemeManager.cpl for those who know what they are. They still work after compression. There not that big but I get about 50-60% compression from them.
Great finds!
Wow, freeyayo50!
Great finds, and thanks for reporting them. It's great to see this little bugger being useful!
BTW, You're packing a lot into your machine! Do you use an sd card?
Best wishes,
edhaas said:
Wow, freeyayo50!
Great finds, and thanks for reporting them. It's great to see this little bugger being useful!
BTW, You're packing a lot into your machine! Do you use an sd card?
Best wishes,
Click to expand...
Click to collapse
Thanx, just tryin to help out the community .
And yes, I am using a 1GB Mini SD card. I use it to hold most of my apps and all my music.
I dont understand why developers dont use this. So far everything that I have compressed has been working perfectly fine. I just luv how much space this thing saves.
as of now i'am building an rom with all dll and exe and cpl upx-ed. Just finished packing and now Build os is building. then i will try if it will run
Now it's flashing to my mda
It was to much. The rom wont load. stops at second boot screenthe 3th wont load.
A noble experiment!
ivanwinkel said:
It was to much. The rom wont load. stops at second boot screenthe 3th wont load.
Click to expand...
Click to collapse
Oh well, you went all out and I applaud you for it! Valiant effort!
Regards,
Email App?
Anybody know which app controls the email accounts?
I use the blackberry client and it takes forever to load up..even when in the background! Creating new mail also takes it's own sweet time!
Would love to squeeeeze a bit more performance out of my wizard!
Andy Phillips said:
Anybody know which app controls the email accounts?
I use the blackberry client and it takes forever to load up..even when in the background! Creating new mail also takes it's own sweet time!
Would love to squeeeeze a bit more performance out of my wizard!
Click to expand...
Click to collapse
I believe you may be talking about the tmail.exe in the \Windows folder.
main OS dlls and exe SOULD NOT be compressed with upx.....this was tested ages ago by rom cookers it will cause problems....true some files can be upx you should leave the OS files alone.
faria said:
main OS dlls and exe SOULD NOT be compressed with upx.....this was tested ages ago by rom cookers it will cause problems....true some files can be upx you should leave the OS files alone.
Click to expand...
Click to collapse
Thanks for the tip, faria!
(Translation: Avoid messing with the sys\os subdirectory, and be careful with the others. Most of these apps are small, so you wouldn't be gaining much anyway.)
wow nice program thanks!
doesnt work with tomtom btw crashes when I start it
kadooosh said:
wow nice program thanks!
doesnt work with tomtom btw crashes when I start it
Click to expand...
Click to collapse
Hi, It worked with my TomTom!? I'm pretty sure I compressed it. Just the main .exe, not any of the supporting stuff. I'll double check it when I get home tonight, (or tomorrow to be honest, I have a big project for school right now)
Tested and working with opera.dll from Opera 8.60u2. It's a huge 5 MB file that once compressed is less than 2 MB . There seems to be no side effects, besides saving over 3 MB of storage. Great program!
igalan said:
Tested and working with opera.dll from Opera 8.60u2. It's a huge 5 MB file that once compressed is less than 2 MB . There seems to be no side effects, besides saving over 3 MB of storage. Great program!
Click to expand...
Click to collapse
Where did you find this opera.dll at??
edhaas said:
Hi, It worked with my TomTom!? I'm pretty sure I compressed it. Just the main .exe, not any of the supporting stuff. I'll double check it when I get home tonight, (or tomorrow to be honest, I have a big project for school right now)
Click to expand...
Click to collapse
oh I just noticed my old exe didnt work either.. must be cause I installed wm6
moprhgear doesnt work either(emulator)
Having just received the phone, I must say that first impressions were great, well designed and seems well built. However, there are some rather disappointing observations:
First: Has anyone tried to record phone calls using one of the many different 3rd party software. It seems the only way to record the other person voice is to turn on the speaker, and this is really ridiculous.
Second: having loaded several word documents, upon opening the, it takes sometimes a minute or more to open, on my Treo, this is done in only a few seconds
Third: the system seems to slow down with repeated use, (a long secession).
Has anyone else found these problems? Also, is there any known work around for recording phone conversations?
I'll leave someone else to talk about the recording calls bit - not something I ever need to do.
On the word documents - I wonder how large these files are that you are opening? Mine are open in a second or two but then they are generally only a couple of pages long. Also the Kaiser uses the latest docx format of MS Word 2007 and I wonder if the older .doc format is being converted as it's opened. Docx is not backward compatible if you try to open Kaiser docx docs on PC using pre Word 2007 then they will not open. You have to save on PPC in RTF format if you are in this situation.
On the slowing down during a long session - I do not find this and I wonder if you have HTC X-button set to close applications or just to minimize them (ie that you are accumulating running applications?)
Mike
I find very big slow down opening large doc files and also scrolling them. On the Vario II (WM5) it was so much quicker.
Does anybody knows the reason why, or can resolve?
Word files
thank you for the reply
The Word files are from a Mac, running: latest-Office 2004. The documents are from 20 pages to 100 pages. They are saved as Word.doc files.
I also own a Treo 700P. The same mentioned files, using (Documents to go) will open in less than 15 seconds.
The same files open on the Kaiser: from 1 to 2.5 minutes.
Here is something interesting. I also own a HP (processor Intel PXA250, running (Pocket 3.0.1). This device will open the same douments very close to the Treo times.
Any suggestions?
I just had a friend send me a .docx to my PC running word2003, it prompted me to download a converter plugin. After installing the plugin, word now converts docx to doc's. I do wonder if the kaiser is doing the reverse as mentioned and converting from doc to docx and grinding on that?
RemE said:
I just had a friend send me a .docx to my PC running word2003, it prompted me to download a converter plugin. After installing the plugin, word now converts docx to doc's. I do wonder if the kaiser is doing the reverse as mentioned and converting from doc to docx and grinding on that?
Click to expand...
Click to collapse
Yes, it's interesting though and I wonder whether this issue may be the same one as with PIE scrolling. Perhaps related to the way it's caching data. For example and it may be the same in word - as you scroll it is fast until you go beyond the first couple of screens the really slows down. Using Touchflo (yes I'm getting the hang of it!) it is smoother but I'm a stylus man. Another possibility that occurs to me is that it may be the Touchflo app. that ironically slows down the stylus scrolling and indeed maybe the Word loading? Yet to find a registry way to stop Touchflo to test this theory.
So that's a few things to look into:
Stopping Touchflo
Doc to docx conversion
Increasing cache sizes
Identifying what has changed compared with TyTn (Hermes) as PIE and Word, appear (in contrast to almost every other application) to be slower than Hermes. (I'd 100% still rather have the Kaiser though for overall performance - still no unwanted soft resets and no hard resets required after 4 weeks!!)
Mike
convert from doc to docx
So, If I have a file created in Office 2004 (Mac) which defaults as (.doc), how can this be converted to a (docx)?
fredm said:
thank you for the reply
The Word files are from a Mac, running: latest-Office 2004. The documents are from 20 pages to 100 pages. They are saved as Word.doc files.
I also own a Treo 700P. The same mentioned files, using (Documents to go) will open in less than 15 seconds.
The same files open on the Kaiser: from 1 to 2.5 minutes.
Here is something interesting. I also own a HP (processor Intel PXA250, running (Pocket 3.0.1). This device will open the same douments very close to the Treo times.
Any suggestions?
Click to expand...
Click to collapse
Fred just thought but did you change the settings on your htc task manager to close programs vs minmizing them (did not see this addressed in your reply) keeping apps running will have a dramatic impact on word load times.
Word docs opening slow
Sorry for the delay with the reply. Yes, all the other apps were closed while running Word. I guess the question is, why can a Treo open these docs faster than the Kaiser?
I spoke to an HTC service center and they commented that my unit was not responding as it should. When I mentioned the screen refresh rate seemed to lag, they said; send it back, so I did. I am now waiting for the replacement.
I will let you know the results.
thank you
HKLM\Software\OEM\TFLOSettings
Change EnableScroll to 0 to disable touch flo
A reboot may be required.
fredm said:
So, If I have a file created in Office 2004 (Mac) which defaults as (.doc), how can this be converted to a (docx)?
Click to expand...
Click to collapse
Folks.. there is no need to use .docx format if you do not have Office 2007. Word mobile can save documents as .doc. Open Word Mobile and go to Menu -> Options... and select Word 97-2003 fom the "Default Template" drop down.
Now it will save your documents as standard .doc.
slow word docs
Well all is well. I just received my replacement phone, and all the docs open in seconds. By the way, with the first one, I did do several hard boots, and that did not help. thanks to all that helped.
problem persists
I still have the problem with the extreeeeeeemely slow scroling in ie and other documents
Its getting very annoying!
Been messing around with some of the more basic tweaks, and I have all of a sudden got a major issue. My File Explorer takes an extraordinary amount of time to load up the Windows directory. I mean, it sits there for a good 5 minutes before it loads up that directory. Once it is opened, I can navigate through my device and the other folders just fine, but the SECOND I try to get into the Windows directory it's just wait-city....
I did not tweak anything with File Explorer. Is there any way to fix this?
its my first PPC so maybe im missing something but... why would u ever really need to explore your Windows Folder that much on your phone? and ofcourse it takes a ton of time to load, it has tons of system files in there to enumerate
that is weird though, mine takes a while to load up, but certainly not 5 minutes
if you are installing programs into your Windows folder, and trying to access them through the File Explorer, then ur "doing it wrong" as they say on this here internets... most anytime i mess with my windows folder on my phone, im doing synced up with active sync on my PC
There are actualyl plenty of reasons to be in the Windows Directory. And many of them have to do with tweaking and other enhancements to the device.
Just backup your stuff and do a hard reset, perhaps it is worth making a note of which stuff you changed should this happen again?
EDIT: Yes there are PENTY of reasons to be navigating into the \Windows folder on a PPC so its not a "doing it wrong" situation...however it is always wise to research the tweaks and changes you are carrying out should you end up in the situation where you cant boot the device....hence losing your data.
On my ELFin, I think this used to happen whenever I messed about with TF2D themes, since they contain hundreds of files.
Mine will load from my PC or on the phone in about 30 seconds (slightly longer from the phone itself)
5 minutes seems rather excessive just for the window's directory
As stated above try the reset on it to see about clearing up some memory.
Also when active sync came up on the phone did you accidentally select a different type of connection than active sync? I did once and everything ran super slow unless I was browsing through it as a thumb drive.
On WM, windows throws EVERYTHING into that one directory, the more stuff you add, the more that directory gets filled. I know my tilt could take like a minute to load that one directory. At the moment the Fuze loads it in under 15 seconds.
I use it to launch cabs and find files. Its my first PPC w/e its called. I had that happen before though it lagged soo much i reset my fuze and it fixed it.
A lot of the time is how its sorted. Make sure its sorted by name, as this is how the files are normally indexed. If you select sort by Type, it has to sort it each and every time you try to browse to the Windows directory. Its nothing wrong with your Fuze, but rather Windows Mobile. We are so due for an update.
Hi Supertruck,
You could try using Total Commander instead of File Explorer, it's loads better by far.
Also, you can setup directory hotlists so if you need to take a look at \Windows\Rings or \Windows\StartUp for example you can navigate straight there and miss out the wait while the device enumerates the \Windows dir.
Cheers,
D.
m. carroll....that was it!!! I had it sorted by file type because I was doing the PTT changes and was copying .lnk files around and wanted them all together. It opens right up now that I have it sorted by Name.
Strange how something so small can make such a huge differece.
Thanks so much!!!
When I close a Word Mobile or RTF-file there is a delay in 20-30 seconds. If I have made any changes and save them insted, it´s the the same result, but then there is the extra time for saving as well.
This problem appeared a couple of weeks after I saved several Word-documents to RTF-format.
The resaon to save them in RTF-format is that it takes 1 second to open and save them instead of 30 seconds to do the same thing with Word-Mobile documents.
I did a hard reset and the problem dissapeared (for about a month) but now I´m back in the same situation.
There is a lot of work involved in doing a hard reset on my part (many, many settings), so does anyone else have a solution?
/Danne
does this happen if the RTF file is on the phone memory and not mini sd
Also, do you have a lot of documents on the device?
When you close a Word file, it brings you back to the file listing that shows all of the Word-openable files on your device. If you have a lot it can take a while to generate that list.
You can cut this down somewhat by filtering the files. Menu > Options > Display in List view:
I have around 60 files that are not default on Kaiser (90% of them are Word-files and 10% RTF-files). All of them are saved on Kaisers own memory and not any memory card.
I now copied one of the RTF-files to the memory card and tried to open and close it from there but the problem with the delay was still there (no soft reset in between).
When I close a Word-file I wind up wherever I had opened before (usually the File Explorer).
I never open Word or RTF-files from Word. I open them from the File Explorer from folders I have created. But the problem still persists even if I open them from Word and it´s list.
I don´t know if it makes any difference but I have set my PC to open RTF-files with Word, so I edit them with Word on my computer.
And as said, it works fine without delay for three weeks and then the delay starts. Frustrating.
And hard reset with all my settings takes 4-5 hours to fix.
/Danne
Solutions?
Isn´t it possible to reset only Word Mobile?
That´s the only program that causes problems.
Or can I copy some file/files or something after hard reset that concernes Word Mobiles default "settings", maybe some kind of template, and put them in a safe place. And then, when the problems set in, I can paste it over the by then problematic "files"?
I don´t want to to a hard reset every three weeks.
I was so glad when it worked with RTF-files because Word Mobile is so damn slow with regular Word-files that it´s ridiculous. Why is Hermes, Kaiser and Raphael equally slow with Word-files? One would expect improvements over the years.
Anyone know of any countdown timer software that will allow me to set 2 countdowns to do Tabata intervals?
A tabata interval is 20 seconds of exercise followed by 10 seconds of rest.
So you set 1 timer for 20 seconds, another for 10 seconds, and they countdown consecutively. You do this 8 times and you have a grueling 4 minute workout.
Anyone know of any Windows mobile/Raphael software that will allow me to do this?
Thanks.
I don't know of a software already set up for that, but you could write a simple mortscript that would count and then play a tone at the end of each interval, set it all in a loop to run the number of times you want(8).
Here is a java tabata timer.
http://tabata.sperker.de/index.php?nav=download&d_sub=dld_mob
An option
Hello!
A couple of months ago I created the attached application. It is as simple as ugly, if I would have more time I would create a better GUI, but it is doing what I wanted and it was created for me
It requires .NET framework 3.5
Delayed start: 1..10 seconds to put down the phone and prepare for the first round
Reps: number of cycles
Beep/Vibro: It plays \windows\default.wav file and/or vibrates when the ongoing interval is elapsed
Time1..Time4 four timer each can be set from 1 to 100 seconds, and cycle is 1-2-3-4
So for a tabata set reps to 8, time1 to 20 and time2 to 10, delayed start is optional
Hope you will like it.
Regards,
KZD
The application as is, please backup regularly, responsibilities are not mine, etc.
Will try it as I really need one ...
Thanx a lot ...
Well it's exactly what I needed
I'd like some advices about wich tools to use to develop and ... would you share your code to enable me to try and add some new functions (select sound, save parameters etc ...)
Nice - I am on vacation and need a way to keep my CrossFit workouts going while gone - this should help nicely. Thanks for sharing!
nyoto said:
Well it's exactly what I needed
I'd like some advices about wich tools to use to develop and ... would you share your code to enable me to try and add some new functions (select sound, save parameters etc ...)
Click to expand...
Click to collapse
Here it is. Please inform me if you achieved anything with it.
And sorry about the delays, i did not check this tread for a while...