I recently bought a GPSSlim 240 device (from Holux). I actually bough two, where one was for my friend.
However, as opposed to my friend, it wont work properly for me. Ive set Holux GPSSlim240 to use COM0, and ive set the GPS-programport as COM1.
However, when using Google Maps, it just says its searching for sattelites, and cant find any. After restarting Google Maps a number of times, and just by trial and error, it some times work! I doubt it has anything to do with reception, as ive been outside under clear skies.
When using TomTom, it wont work at all untill i get a connection with Google Maps.
Is there any settings, or something that may be wrong here? It works great with my friend's HTC S710, but with mine it doesnt! (ive even tried a hard reset!)
Cheers!
Untouchab1e said:
I recently bought a GPSSlim 240 device (from Holux). I actually bough two, where one was for my friend.
However, as opposed to my friend, it wont work properly for me. Ive set Holux GPSSlim240 to use COM0, and ive set the GPS-programport as COM1.
However, when using Google Maps, it just says its searching for sattelites, and cant find any. After restarting Google Maps a number of times, and just by trial and error, it some times work! I doubt it has anything to do with reception, as ive been outside under clear skies.
When using TomTom, it wont work at all untill i get a connection with Google Maps.
Is there any settings, or something that may be wrong here? It works great with my friend's HTC S710, but with mine it doesnt! (ive even tried a hard reset!)
Cheers!
Click to expand...
Click to collapse
Standard settings for TomTom are normally Com5 and Com8.....
Dirk
Im also using a Holux GPSSlim240, and i've never got it to work using the automatic GPS settings.
I've unticked the box labelled 'Manage GPS Automatically (recommended)', then in the bluetooth com ports, set it to a spare port (com4 on my hermes), and then just set your software to look at that com port.
Never had any problems connecting like this.
you have to uncheck secure connection when you register the bluetooth device and don't use external antenna application for tomtom it works
Related
Hi,
I can't GPS signal no matter what I try. I didn't change any default settings in External GPS.
I've installed TomTom and Google maps but neither application is seeing GPS device. In TomTom I get no valid GPS signal and in Google Maps I get not able to initialise the GPS. I've tried using both of the appications with clear view of the sky and left the phone for about 30mins to try and find the satelites.
Any ideas?
I'm thinking I'm having a faulty device but I don't want to replace it just in case I get the new one with SOD problem.
Thanks for any help.
Dt11
at the moment i got the same problem! I can't get it running. The yellow LED is on but there is now signal! Pls help us...
(PS: GpsViewer does not work)
Geko
Try Autodetect of GPS ports maybe the settings were accidentally changed
darkilici said:
Try Autodetect of GPS ports maybe the settings were accidentally changed
Click to expand...
Click to collapse
From Com1 to Com11 open failed or None
hmmm
Did you change something on the "External GPS" setting?
If yes, then I think you need to hard-reset.
gogol said:
Did you change something on the "External GPS" setting?
If yes, then I think you need to hard-reset.
Click to expand...
Click to collapse
I thought your going to ask this Yes I did once...
Hmm ok i save all my things and then lets try...
Grrr. Why is Htc is not able to get this work without hard resest?
Geko
Yeah, HTC should improve that one.
The hard-reset thing is described here:
http://forum.xda-developers.com/showthread.php?t=330235
ok thx now it does work....
So dt11 you have to do the same otherwise it wont work...
Geko
Stupid question, but hard reset = soft reset but holding down the 2 soft keys as well yar?
There was a discussion of this in some previous threads, based on which I installed the GPS Viewer and after activating GPS with that (com 4, 4800 baud) Google maps worked very well. No need for a hard, rest, please search the previous topics in GPS and Kaiser
[COM4 / 4800 baud] are the default settings aren't they? I think i've tried those before :S
michalopoulosgk said:
There was a discussion of this in some previous threads, based on which I installed the GPS Viewer and after activating GPS with that (com 4, 4800 baud) Google maps worked very well. No need for a hard, rest, please search the previous topics in GPS and Kaiser
Click to expand...
Click to collapse
hmm this solution didn't work on my Kaiser...
Geko
Question:
Does someone have the "GPSmeter Professional Edition" running?
If i do install this app and run, it's over with the built in GPS so
don't install this app i always got problem with this one...
Can someone else confirm?
Geko
i couldnt get google maps or windows live to work without first running gpsviewer but when my new copy of tomtom navigator 6 (the trial didnt come with my phone) i did a clear storage which takes the phone back to its factory settings and then tomtom work super fast and very accurate in all kinds of weather without having to install a "jumpstart" software.
the way the GPS seems to work is you need a app that will start the GPS for you hence why most HTC bought Kaisers come with tomtom once you start tomtom hit the ok button and then start google maps or Live maps and GPS will work. there also is an app called GPSViewer i believe that will also start the GPS for you. I dont think anyone has gotten Google maps to start the GPS by itself?
austinsnyc said:
I dont think anyone has gotten Google maps to start the GPS by itself?
Click to expand...
Click to collapse
Some people have reported that they have but I always seem to need to give it a boost. I use GpsViewer and that always seems to get Google Maps started okay.
Cheers.
All working now. I had to do a hard reset.
It has been said so many times but it won't hurt to repeat it:
WARNING: Don't touch any settings in "External GPS"!!! Otherwise your GPS will not work and you will have you hard reset you phone!
FWIW, I did not have to jump start my GPS in my 8925 with the default ATT ROM. Once I replaced it with the HTC ROM, I now have to jump start it. So it appears whatever the problem is, it's fixable via software.
I screwed my Kaiser gps by trying to use map4pda which automatically changed the port in settings for gps. What can I do? Gps not working anymore,even after putting back the old settings and doing softresets,even took out the battery for a while
Not a single program can find my inbuilt gps now
I do not want to do a hard reset,I have tooo many progs and no backup
Please help
I am afraid to use any other gps program(even after a hard reset) because this could ruin my gps settings
I read somewhere that gps applet is misconfigured(from factory)..and even a slight modification to it,could lead to my gps not functioning till a hard-reset.
Also it's not normal that a program can modify the gps'settings by itself
I have bad news for you, but at least it confirms that Map4PDA is a bad program. I used to love the program. It worked awesome on my 8525. You can have it use MSN, Yahoo or Google Maps.
I installed it on my Tilt and at first I didn't realize that it was the culprit. Then I hard reset and installed only that program and a few others to test GPS. Once I ran Map4PDA, GPS no workie. Hard reset again.
I have not run it since my last hard reset and my GPS still works perfect....and I have used many, many different GPS programs.
So with all that said, I'm afraid a hard reset is your only option. I am not the only one that got bit by this. I posted in another thread here and a few others had the same results as me.
Lidberg said:
I have bad news for you, but at least it confirms that Map4PDA is a bad program. I used to love the program. It worked awesome on my 8525. You can have it use MSN, Yahoo or Google Maps.
I installed it on my Tilt and at first I didn't realize that it was the culprit. Then I hard reset and installed only that program and a few others to test GPS. Once I ran Map4PDA, GPS no workie. Hard reset again.
I have not run it since my last hard reset and my GPS still works perfect....and I have used many, many different GPS programs.
So with all that said, I'm afraid a hard reset is your only option. I am not the only one that got bit by this. I posted in another thread here and a few others had the same results as me.
Click to expand...
Click to collapse
Thank you for the info..
Are you sure this is the only gps program that messes up the gps?
Did you test Igo,GpsTuner,GpsGate,Pathaway professional,GeoScout??
But Gloposis,BeeLine gps??
Any other incompatibilities?
Thx
I haven't tested all of those. Here's what I have on my phone right now:
FFF (finger friendly friends)
Google Maps
Live Search
GPS test
GPS Utilities
GPS viewer
GPSinfo
Navigator II
TomTom 6
TrackMe
Virtual Earth
VisualGPSce
I think the other ones will be safe. Map4PDA is the only one I've heard of that kills the Kaiser GPS.
A hard reset is your only option and shouldnt be a nightmare.
Work out what apps you want, check you have the cabs etc, sync your device with your pc and away you go.
I keep all my favourite apps cabs on my storage card so that I could hard reset even if away from my laptop (but I do have an exchange server so setting up sync remotely is also easy).
Reinstalling 60 applications IS very time-consuming,let alone the time to configure them and the OS just the way I like them.
But giving that I do not have any other chance,I'll do it
My only concern is that I'll install other application which will kill again my gps and I have to take all from the beggining. I come from an Eten X500 and this was never happened to me.There , NO application could change some system settings..
emariu said:
Reinstalling 60 applications IS very time-consuming,let alone the time to configure them and the OS just the way I like them.
But giving that I do not have any other chance,I'll do it
My only concern is that I'll install other application which will kill again my gps and I have to take all from the beggining. I come from an Eten X500 and this was never happened to me.There , NO application could change some system settings..
Click to expand...
Click to collapse
I too noticed that using different GPS software tends to screw up something on my Tilt. I've used Google Maps and MS Live Search and these tend to screw things up to the point that the GPS is useless. I also have Copilot Live 7 installed and this program has the ability to reset the GPS on my device.
For those not familiar with Copilot, when you go to the Settings panel in Copilot and choose Reset GPS, it asks you to enter a city within 100 miles of your current location in order to reset your GPS properly. If someone could develop an app to replicate this... This would be a great standalone app for all Tilt & variant owners.
But if the gps is already dead,how will Copilot know which city is in 100 miles radius ??it cannot tell the current location,beacuse it cannot get a fix from sattelites...so one cannot do a reset to the gps..
what about a backup? make a backup before you install an app that you don't know if it works or not, install/run app, if all is good, no worries. if all is bad, restore from backup.
the Tilt ROM comes with sprite backup and htc backup is flating around this forum...
emariu said:
But if the gps is already dead,how will Copilot know which city is in 100 miles radius ??it cannot tell the current location,beacuse it cannot get a fix from sattelites...so one cannot do a reset to the gps..
Click to expand...
Click to collapse
Not sure how this works, but I've been able to get my GPS working again every time with this feature.
If entering a location with Copilot fixes your GPS, then it wasnt broken to begin with. Just because Google Maps cant get a fix, doesnt mean that your GPS isnt working (all it means is that you need to download the new google maps which is a lot better).
One needs to think about such problems logically. When you open a GPS enabled APP and try to get a fix, does the orange GPS light flash on the device. If it does, then your gps is working with your device. If it then fails to get a fix it is because it cannot see the satellites. Make sure you are giving it a clean line of sight to the sky (ideally to the south if you live in UK).
If the orange light doesn't come on then your com port settings are wrong and its hard reset time.
Oh and if your GPS is working but seems to take a long time to get a fix, then use QUICKGPS to give it a prod.
In the external GPS settings programs tab set to 4800, in the hardware tab gps hardware port select none, baud rate should be at 4800. In te access tab tick manage gps automatically.
Load the TomTom app that comes with the Kaiser or download it from here. go to config on the gps settings within TomTom and it will right itself
Make a backup of the registry and put is back in this situations, easy and fast when you try different programs.
Btw Igo works fine also Nusa maps (Indonesia), Map King pro and Papa Go..
unwired4 said:
If entering a location with Copilot fixes your GPS, then it wasnt broken to begin with. Just because Google Maps cant get a fix, doesnt mean that your GPS isnt working (all it means is that you need to download the new google maps which is a lot better).
One needs to think about such problems logically. When you open a GPS enabled APP and try to get a fix, does the orange GPS light flash on the device. If it does, then your gps is working with your device. If it then fails to get a fix it is because it cannot see the satellites. Make sure you are giving it a clean line of sight to the sky (ideally to the south if you live in UK).
If the orange light doesn't come on then your com port settings are wrong and its hard reset time.
Oh and if your GPS is working but seems to take a long time to get a fix, then use QUICKGPS to give it a prod.
Click to expand...
Click to collapse
That's not true in every circumstance. Like the OP, I installed Map4PDA. When you run the program, it searches for the GPS (you can't specify what COM port to use manually) and in my case, hangs on COM3 for whatever reason. I let it sit for over an hour and ended up doing a soft reset because the program was unresponsive.
After that, my GPS would not work in ANY program that it worked in previously. I checked and double-checked my settings to no avail. I posted here and on MoDaCo and got some good advice but in the end, only a hard reset fixed it. Yes, the GPS light would blink but my Tilt would run very, very slowly and would never get a fix. That QuickGPS program would error out every time I ran it. I don't know what Map4PDA did, but it hosed my GPS and it looks like the OP got bit too.
Since my last hard reset, I have installed tons of GPS enabled programs and they all work just fine. I also have never run QuickGPS and I can get a fix within 10 seconds in any program.
I know it's not logical, but that is what worked for me.
EDIT: I don't advocate the spreading of paid for s/w, but I would be curious to see if your CoPilot program would successfully reset the OP's GPS.
If a gps program asks for manual configuration of hardware gps port and the baudrate,what should I input? Like Igo for ex....or GpsTuner...
emariu said:
If a gps program asks for manual configuration of hardware gps port and the baudrate,what should I input? Like Igo for ex....or GpsTuner...
Click to expand...
Click to collapse
COM4, 4800 baud
this com 4 is a program port,it's not the harware gps (native) port..
can we find out which port number is the default(hardware)?
But thnks anyway for the answers
COM4 is what works. Yes, technically, it's a soft port, but it has worked with every GPS enabled program I've tried (except for Map4PDA but that is another story).
The neato thing about that is that it allows more than one program to access the GPS at the same time. If you go directly to the hardware, you lose that functionality.
Lidberg said:
COM4 is what works. Yes, technically, it's a soft port, but it has worked with every GPS enabled program I've tried (except for Map4PDA but that is another story).
The neato thing about that is that it allows more than one program to access the GPS at the same time. If you go directly to the hardware, you lose that functionality.
Click to expand...
Click to collapse
I use GpsGate anyway,so using multiple gps programs at once isn't a problem for me,BUT because I cannot use hardware port, we are stucked with 4800 baudrate,which is a limitation only with soft multiplexer(built in the OS)
I purchased a tilt about 2 weeks ago and have been using the gps fine with navadi htc gps tool, ms live search, and google maps. In fact im on a trip in san diego today and i was using the gps earlier today with google maps. I was lost for a while and i couldnt get the gps to work google maps wouldnt lock onto a sattelite, next i went into the windows settings and it wouldnt save anything under the hardware tab. After searching the net and not getting anywhere i decided to run clear storage to reset the tilt. I reset it and now google maps says it cant find a gps device at all. So i installed and ran the htc gps tool. When the device is set to communicate on com 4 htc gps tool says open com port failed. When i change the windows options and htc tool options to communicate on com 3, htc gps tool gives me no errors but also doesnt report any data being recieved. Im really hoping the gps isnt broke i didnt do anything to the phone physically to damage the gps but i have been running the phone at 57600 baud instead of 4800. If anyone has any experince with this gps unit or has had this problem i would appreciate any help. Also if its agreed this is just a phone problem is there usually a warantee or should i use the at and t insurance i bought whats the best rout here im not sure if i saved the phones recipt.
learn to use the enter button on your keyboard...and try turning agps off
i just checked agps it is off
[HKEY_LOCAL_MACHINE\Software\HTC\SUPL AGPS]
EnableAGPS=0
is there anything else i could try. Like i said i did clear the storage so everything should be back to default settings.
problem solved
boorishid said:
problem solved
Click to expand...
Click to collapse
What did you do?
TotalAxim said:
What did you do?
Click to expand...
Click to collapse
Instead of just saying "problem solved", how about letting the rest of us know what happened....sorry rant over
acually im not quite sure what i did. I just set everything back to defualt in the gps settings com 4 at 4800 baud and the gps tool was able to communicate with the gps again.
Im just not quite sure what i did, i mean orginally it wasnt working with the default settings .
Also ive been having a real hard time getting gps locks lately i find myself having to use gps tool to constantly clear the gps memory, then i have to reopen it and preform a hot start. I never had to do tat befhore this problem. I have regular quick gps updates too. When i open gps tool it just tells me mode 2 fix not available. This happens after using google maps 2 or 3 times.
boorishid said:
acually im not quite sure what i did. I just set everything back to defualt in the gps settings com 4 at 4800 baud and the gps tool was able to communicate with the gps again.
Im just not quite sure what i did, i mean orginally it wasnt working with the default settings .
Also ive been having a real hard time getting gps locks lately i find myself having to use gps tool to constantly clear the gps memory, then i have to reopen it and preform a hot start. I never had to do tat befhore this problem. I have regular quick gps updates too. When i open gps tool it just tells me mode 2 fix not available. This happens after using google maps 2 or 3 times.
Click to expand...
Click to collapse
Have you been playing with the "External GPS" application? That's known to cause serious problems with the GPS, even requiring a hard reset (although I saw work being done to restore some registry settings to default to avoid needing the hard reset)
I dont think so im not even sure what the external gps application is. I use a tilt so i dont have all the cool htc stuff ive downloaded and installed google maps, ms live search, quickgps, and the navadi htc gps tool. I did a hard reset and am still having trouble locking the gps in with out using gps and clearing the gps.
Strange part is i was on a trip and google maps was working fine all day and for weeks before the trip. All the sudden it just stoped getting a lock. Didnt drop the phone change any software settings or anything.
you most likely didnt have to do a hard reset...to get a good gps lock you need to download satelite information through QuickGps every 6 days but i do it everytime i use my gps through live search to get a god satelite fix everytime. and with the externa gps settings i set it to any port usually com 0 and never mess with the software tab , only hardware...the baud rates too you dont need to mess with that, just choose a com, quickgps download and soft reset u should always get a fix...if thir are still problems search for gps tweaks
moegdaog said:
you most likely didnt have to do a hard reset...to get a good gps lock you need to download satelite information through QuickGps every 6 days but i do it everytime i use my gps through live search to get a god satelite fix everytime. and with the externa gps settings i set it to any port usually com 0 and never mess with the software tab , only hardware...the baud rates too you dont need to mess with that, just choose a com, quickgps download and soft reset u should always get a fix...if thir are still problems search for gps tweaks
Click to expand...
Click to collapse
....or don't touch the application at all and use com4?
Hi all,
I installed the WM6.1 RUU from the HTC site, and discovered that my bluetooth receiver won't work with Tomtom anymore. nor wil the internal antenna. The phone keeops trying to dial up a modem conenction when trying to access the receiver or antenna.
I've made certain the bluetooth link is up, and set up the COM ports, but no good.
Has anyone else experienced this problem?
Um Bluetooth and TomTom, I don't think many use those together in this forum. See, the kaiser/tilt/etc/etc has a built in gps dohicky that we use. Now if thats what your doing then of course I would suggest searching.
I came up with this and it's recent.
http://forum.xda-developers.com/showthread.php?t=397728&highlight=gps+won't+work
If it's a bluetooth gps device then what happens with regular Bluetooth devices such as an ear piece?
Thanks for the response-
I am aware of the integral antenna, but it won't "see" that, either. I have tried numerous COM port settings with no luck. The other thread you reference indicates the user will eventually get GPS connectivity, whereas I get none- the phone tries to dial out to a modem, or tries to use the data connection for the GPS receiver, whether it be bluetooth or internal. It then gives up, obviously not making a connection.
I don't use an earpiece, so it's not a big deal to me.
Do you have it set to com 4 and have you tried something like google maps? Set it so that windows manages it. There is also another program out that deals with just gps, no maps or anything and it has been known to help jump start gps. It should be dialing out just for gps unless it's pulling up a map or something.
ChumleyEX said:
Do you have it set to com 4 and have you tried something like google maps? Set it so that windows manages it. There is also another program out that deals with just gps, no maps or anything and it has been known to help jump start gps. It should be dialing out just for gps unless it's pulling up a map or something.
Click to expand...
Click to collapse
do you mean franson gpsgate?
amkaos said:
do you mean franson gpsgate?
Click to expand...
Click to collapse
It's called GPSviewer. Let me know if you can't find it online. At the moment I can't upload it or anything until I get home.
I gave up, and reflashed to WM6.0
all is well....
I installed iGO8 and now all my GPS, Garmin, Google maps dont work..
It just gets stuck at waiting for GPS signal...
What's wrong? It was a clear blue sky out door when I checked this too..
Mmm sounds familiar. I upgraded my X1 firmware to the stock R3A rom (last weekend) and had this trouble with iGO8.3 (or TechrificWay which is the local Australian version) after re-installing all my apps. Had the same problems with Google Maps. Thought the GPS was crook. I was just about to do a hard reset and re-install but decided to try my old Copilot Live 7 software and everything worked fine. So un-installed iGO8.3 and re-installed and everything worked fine. If I think about it I might have un-installed iGO8 before I installed CPL7, not sure. Anyway everything has worked fine since.
Perhaps worth a try?
Same problem here on my fuze.
I had to wait many mins nearly 30mins to get the signal and if lil miss, again 30mins.
I'm using garmin and not sure about others. I tried many radio versions but still same.
BTW; sorry for posting in wrong device section but I found a nice thread here which could help.
Best Regards
I actually have 2 GPS on my sd card atm, could this be the problem?
I don't think so, unless both aren't running in background.
Checkout in FdcSoft Taskmgr if there are.....
Best Regards
Im gonna try uninstall everything, delete darmin off of sd card, and renstall igo. will post back
ok, so i uninstalled everything and was only left with google maps. no igo or garmin. so i tried too use google maps with gps, and even google maps coudnt even work. it said it cant find the gps receiver.. how can i turn it back on? could it be my reg setting, i make gprs disconnect after 2 mins?
Ive tried using manual com using baud rate 4800 and all kinds of combinations.
It would say "intializing GPS..." then it would come up with no GPS receiver found.. whats wrong??
Ive tried using manual com using baud rate 4800 and all kinds of combinations.
It would say "intializing GPS..." then it would come up with no GPS receiver found.. whats wrong??
I had a problem a few weeks ago when I couldn't get GPS to work (in Google Maps and CoPilot Live 8).
It turns out that my QuickGPS data has expired (somehow it got set to manual download). Updating the data and setting QuickGPS to update automatically made everything work normally.
In Advanced Config Tool, there is an option to turn on aGPS. I have mine set to "ON" even though I don't know if this has any effect on the X1.
Yep, Ive already turned on everything A-GPS, GPRS all settings on, tried google maps, everything again.. Nothing seems to work and it keeps coming up with No GPS receiver found although I checked if my GPS builtin is actually defective by running GPSGate2 and testing my builtin GPS. GPS said it reads ok.. so what is the problem.. its really annoying.. it ruined my anniversary 6month with my gf
^^^ You still didn't mention running QuickGPS...?
Yeah, done that too. Countless times...