New to XDA IIi, got problems with sound - PDA2, XDA IIi, 2020i General

Hi all. I have just bought an XDA IIi. It works fine, except for the sound!! With the volume up to max, I can barely hear anything. I cant hear anything when I use the phone unless I turn on the load speaker, and even then, I can only hear a person talking, I cant actually hear what is being said.
Could this be a software problem? I un network locked my phone using xdadev_all_unlock.
Any clues will be greatly appreciated.
Thanks

XDA2i - Probs with sound
I've seen several threads which mention that sound on XDA2i phone has been lost after unlocking phone. Speaker still works when playing music (MP3 etc.) but cannot use microphone/speaker when trying to make calls.
Re-flashing doesn't solve it either. Sadly, no-one seems to have found a fix.

Related

Kaiser Microphone Problem with Loudspeaker On

Hi,
Does anybody else have a problem with microphone when loudspeaker is on during a call? Ive had quite a few people complaining that they cant hear me when Ive got the speaker on. As soon as I switch off the speaker, they can hear me fine. Does not matter if I place the mic close to me or move it further away, they still say they have trouble hearing me with speaker on.
Any ideas if I can resolve this? Have tried AGC setting with no success.
Thanks
I have the same problem for a while. Can't use speaker phone. It was working fine before so I am thinking some of the software that I installed render the speaker useless. I will try to backup everything and then do a hard reset to see if the problem still exists.
My Friend; I have the Same Case in my Kaiser and I post yesterday this issue but with no luck . we have to find a solution for this bugs, I tried something it might improve it a little ; during the call reduce the Speaker volume to be 2 degree only and it might help. But we have to know if it is a common in all devices or not
I tried the Hard reset but it is smae and no luck yet
I just tried the method proposed in abother thread here and it fixed the problem! I disabled the Microphone AGC in the phone setting and it works fine now. Save me some hassle.
are you sure of disable AGC as I tried but it is the same result
i have the same problem, and i don't have the auto mic gain enabled. i haven't hard reset yet, but it stopped working properly after i installed resco voice recorder and/or vito voice...
Looking at another thread, it may be that the speaker is half duplex. I.e you both cant be speaking at the same time. Wonder if this can be resolved?
My Kaiser comes by default Microphone AGC disabled, and the problem persists. Any suggestion???? thanks.
tsangwc said:
I just tried the method proposed in abother thread here and it fixed the problem! I disabled the Microphone AGC in the phone setting and it works fine now. Save me some hassle.
Click to expand...
Click to collapse
rocho said:
My Kaiser comes by default Microphone AGC disabled, and the problem persists. Any suggestion???? thanks.
Click to expand...
Click to collapse
Precisely you are right. I do not think by enabling/disabling the Microphone AGC does help. This is apparently a design fault. I have got my set replaced from the service center but still having the exact problem.
I wonder if HTC can fix this problem! I read from one of the threads somewhere that one of the users found the MDA Vario III works perfect...though they are also of the kaiser family....
wish2006 said:
Precisely you are right. I do not think by enabling/disabling the Microphone AGC does help. This is apparently a design fault. I have got my set replaced from the service center but still having the exact problem.
I wonder if HTC can fix this problem! I read from one of the threads somewhere that one of the users found the MDA Vario III works perfect...though they are also of the kaiser family....
Click to expand...
Click to collapse
Same problem, and i haven't modded mine at all. Using the default ATT ROM and tried speakerphone, couldn't be heard...
I had the same problem when using my TyTn and attempting to use the speaker phone. I was hoping this would be resolved in the TyTn II but it's the same problem where the person you speaking to complains they can't hear you properly.
I think its a common problem in this model as my device is brand new and same problem
Strange. I was making some tests last night, talking to another person using the speakerphone.
It worked just fine most of the time. Her voice was a little distorted due to the bad quality (maybe just bad equalization) of the speaker, but she told me she could hear me well. She told that even though I was speaking far from the mic and not that loud, the sound came just clear to her. The only thing she noticed was that I sounded like an answering machine .I also tested running some programs while speaking to her.. and then, coincidence or not, she heard some static for a second or two.
I also tested speaking while she was also speaking, and we both heard each other. It worked as a full-duplex.
I must say that it was late at night, so it was all silent. Except when my dog started barking, he was far away at the yard, and she heard him too.
I used it some days ago while driving, and she couldn't hear me. I had the radio on, and there was traffic sound and stuff. I had to turn the speaker off because I was driving and I was in a hurry, so I couldn't test any further.
Later on, I tested it with my girlfriend when we both were in my car and I was driving. She said she could hear me, but then it started echoing due to the loudness of my speaker, and that was all we could test.
I had Microphone AGC disabled in all tests.
I have the same problem... the other person cannot hear me when i am on speaker
i have the same problem!!!
This is a serious problem it appears most of us are having with the speaker phone microphone.
Has anyone logged this problem with HTC?
It looks like a s/w update will be required to fix?
I am using with an MDA Vario III UK and it seems to be working fine, I have not had any problems even after installing software or by having AVG on or off.
There is a problem if both parties speak at the same time where either person may not hear the other, I think that is to do with a duplex problem mentioned earlier in the thread.
It appears a number of people have the problem and a number do not. It may be software version related.
I am using the following software on an AT&T Tilt:
ROM version: 1.57.502.2
Radio version: 22.45.88.07H
We need to find a pattern with the problem, Can others share what software they are running and if they have the microphone problem?
Speaker problem is software
I can confirm that it is a software problem. When I recieved my MDA Vario III didn't had the speaker problem but as soon as I flashed my device with either the kaiser or tytn II rom the problem occured. Don't know how to solve it...

No incoming or outgoing audio. Anyone ? Anyone ?

Hello. I've been relentlessly searching everywhere for a solution to my plight.
My Diamond touch works fine for the first few incoming and outgoing calls but then all of a sudden there is no incoming or outgoing audio when I make or receive a call. I.E. the call connects but I can't hear the caller and they can't hear me. The phone still rings and caller display still works. Likewise I can still place a call in the normal way. Just no audio in either direction. Soft reset sometimes restores normal operation but sometimes a hard reset is required.
The phone was originally on UK Orange network but is now unlocked and running on UK O2.
I got to grips with flashing quickly enough and I have now tried upteen combinations of roms and radios but nothing seems to help.
Has anyone else had this problem ? Or better still managed to cure it ?
Any help or suggestions would be so so so appreciated.
Oh yeah just in case it's relevent.. The phone seems to work perfectly in every other way. wifi, bluetooth, 3G, gps etc. Battery life is a wee bit pants but I'm not too concerned about that.
Thanks in advance guys !
brianbelfast said:
Hello. I've been relentlessly searching everywhere for a solution to my plight.
My Diamond touch works fine for the first few incoming and outgoing calls but then all of a sudden there is no incoming or outgoing audio when I make or receive a call. I.E. the call connects but I can't hear the caller and they can't hear me. The phone still rings and caller display still works. Likewise I can still place a call in the normal way. Just no audio in either direction. Soft reset sometimes restores normal operation but sometimes a hard reset is required.
The phone was originally on UK Orange network but is now unlocked and running on UK O2.
I got to grips with flashing quickly enough and I have now tried upteen combinations of roms and radios but nothing seems to help.
Has anyone else had this problem ? Or better still managed to cure it ?
Any help or suggestions would be so so so appreciated.
Oh yeah just in case it's relevent.. The phone seems to work perfectly in every other way. wifi, bluetooth, 3G, gps etc. Battery life is a wee bit pants but I'm not too concerned about that.
Thanks in advance guys !
Click to expand...
Click to collapse
M8. I don't think you're on your own on this one. I have the same problem ...or similar. My phone pairs OK but drops the blue tooth connection usually on audio but quite often altogether. Re-pairing is a pain in the A$$. It's definitely a phone issue as I have the older qtek and a nokia that work with my kenwood system without a hitch but pair up the diamond and I'm pulling my hair out after 5 minutes.
I've tried the latest stable radio, setting pin code to 0000 & also turning off security but it still drops connection after an outgoing or incoming call.
Does anyone have a fix for this?
...and jetware 1.3 doesn't solve this either. Installed it the other day and pretty much the same ...audio is fine until a call is terminated and then it drops A2DP but sometimes stays connected on telephone. Other times both drop off!
bt stack
In my case it looks like the BT stack on the diamond is not compatible with the Kenwood DNX8220BT stack. I see quotes that HTC implemented their own stack for the Diamond so could someone put me out of my misery and tell me if it's possible to change the stack to something like that on the wizard as that works flawlessly with my Kenwood satnav?
ADD+
My phone does that weird thing too where I couldnt hear the other person on line. I have manage to found a quick fix for it tho.
Solution 1: During the call (when you notice you cant hear the other person), press the middle circle button (which will activate the screen if dimmed out), then press the speaker icon. This allows you to continue the conversation on speaker with the other person on line without having to soft/hard reset.
Solution 2 (works sometimes): During the call, reduce the volumn, wait a secnd or two, then raise it again.
Bt3030 - Shb6100/7100
Have the same problem with Philips shb7100 and shb6100. i also have tried the Jabra BT3030.
I used and test them on a Tyten and wizard no problem at all.
I had same problem before...found out is hardware problem...sent to htc care and after tat everything ok.
ADD+ said:
In my case it looks like the BT stack on the diamond is not compatible with the Kenwood DNX8220BT stack. I see quotes that HTC implemented their own stack for the Diamond so could someone put me out of my misery and tell me if it's possible to change the stack to something like that on the wizard as that works flawlessly with my Kenwood satnav?
ADD+
Click to expand...
Click to collapse
I have the exact same model (kenwood dnx8220bt and XDA ignito (diamond), same problem where everything is okay but when you go into the contacts menu and try to make a call, BT connection either drops or nothing happens when you try to make the call.... this is a joke.... how can my old HTC P3300 work with it without a problem and this newer Diamond flop like a fish...
any updates or news??
I've the same problem. No Sound after some call or others sounds play. When this happens and if I receive a call the others not listen my voice. This means that when audio disappear, speaker and also microphone not work, like the system can't comunicate with them. The volume control not resolve my problem. I've done HR and with nothing installed in my phone the problem come back again after few minutes. So it's not a problem of third part bad software, but htc orginal software or hardware problem.
Anyone solve it o have idea?
Thanks!
I join the list - having problems with my xcarlink which used to work with my P3300
Tried using A2DP Toggle which helped on the artemis but seems to have NO effect at all on Diamond
The Diamond does connect flawlessly to my jabra earpiece and my Sony ericsson bluetooth speaker
ninja_pimp said:
I had same problem before...found out is hardware problem...sent to htc care and after tat everything ok.
Click to expand...
Click to collapse
I have the same problem. Sent my HTC back twice for repair but still no solution. The first time they didn't found the problem, the second time they replaced the speaker.
What did they do with your phone to fix it?
According to this thread http://forum.xda-developers.com/showthread.php?t=431826 it is a hardware issue. The phone needs to go back to the supplier as it is faulty.

no sound when phoning

Hi,
i just got the vario3/kaiser and since I've got it, it turned off the sound when I phone to someone or accept calls.
Meaning: when someone calls (or i do a call) I just cant hear anything from the interal speaker (not the loud speaker, the one for the ear).
when i turn it off and on, it works again
havent used bluetooth devices yet and didnt do anything bad, only got voice commander 1.6 on it, but that cant be a problem?!
does anyone share the same problem?
Question has be re-asked (and answered) in another thread. No need to keep this one alive.
Ta
Dave

In-call speaker problem. pls advice

Hi!
ive tried searching but all i can find is usually incall voice problems requiring bluetooth or wired headsets.
my problem is the complete opposite. most of the time, when i use the phone to answer a call (without wired headsets or bluetooth) the person im talking to can barely hear my voice. i have to literally shout for them to understand what im saying.
ive tried placing the pda and phone volume to max level already but it doesnt solve the problem.
is there anyone who experienced this same problem? any tips? thank you for taking the time to read this
Hi,
ive the same problem. my voice goes as interrupted to the person i talked. But i can hear clearly everyone i talk.
ive tried radio rom 1.14, 1.16, 1.17, bu all the same.
Is there anyone know, hor can i fix this???

Weird problem with speakers and mic

I have a problem with my unrooted Xperia Z with a locked bootloader. My main speaker does not work for any media like music games or videos, but works fine for loudspeaker calls. Also the earpiece speaker doesnt work at all. Another problem i found was that my microphone would not work at all unless it was in a call and i was using loudspeaker. The final problem is that when ever i plug in my earphones, google now pops up and sometimes my phone starts playing music automatically throught the earphones, when i remove the earphones, instea of stopping the music continues but the speakers dont work so it just keeps playing them silently. If anyone knows the soultion to this, please respond as ive searched everywhere and i have not found one solution yet.
UPDATE: i used the application soundabout to reroute the audio and the calls are now fine, the only problem is that when i plug in my earphones the google now problem persists. If i plug in earphones with a mic, i dont get any of these problems and everytime i want to use my internal speaker for media, i have to manually re-route the audio to them. Anybody know a solution to these 2 problems?
I do have the exact same problem, I tried different ROMs and Audio Mods (at the moment I've got a stock ROM) without any change.
Did you somehow fix it?
Exact same problem, i run stock android 5.1.1 build 10.7.A.0.222 locked boot loader. Problem suddenly came up last week during vacation, quite some time after I did OTA upgrade to 5.1.1 - so this is not related to ROM updates.
After installing soundabout (thanks for the hint) the rerouting did not work immediately - i had to set phone to earpiece and media to speaker in the app and reboot for it have an effect.
I think the root cause is, the phone thinks there are headphones connected, when there really aren't. If I use the UKW radio app, it starts and shows headphones as output-icon right away - it should actually complain that there is no reception without phones because the antenna (headphone cable) is missing. Since it doesn't complain I guess that's the culprit.
Any hints how to fix that, without using a rerouting app? (kinda stupid, using bluetooth speakers and so on now needs a manual setting change in soundabout).
I have that phone for more than 2 years now and used headphones maybe twice with it, so a busted headphone-jack is out of the question too.
Guys give it a try.
Thanks Ess Arr, that really works!

Categories

Resources