Hi!
ive tried searching but all i can find is usually incall voice problems requiring bluetooth or wired headsets.
my problem is the complete opposite. most of the time, when i use the phone to answer a call (without wired headsets or bluetooth) the person im talking to can barely hear my voice. i have to literally shout for them to understand what im saying.
ive tried placing the pda and phone volume to max level already but it doesnt solve the problem.
is there anyone who experienced this same problem? any tips? thank you for taking the time to read this
Hi,
ive the same problem. my voice goes as interrupted to the person i talked. But i can hear clearly everyone i talk.
ive tried radio rom 1.14, 1.16, 1.17, bu all the same.
Is there anyone know, hor can i fix this???
Related
Done this on loads of different devices with different bluetooth headset and the same result. Able to pair devices no problem. On making a call all one hears is a lot of static no voices. When answering a incoming call the same happens you answer the call but can't hear anything. Referred this the the ever helpfull O2 technical support who advised me to download latest Rom with the same result.
Any suggestions would be much appreciated.
Thanks in advance :roll:
Stupid question but you have tested the bluetooth headset with another phone and checked that its not actually the headset which is faulty?
I spent ages trying to diagnose a problem with my phone when I first got a wired GPS unit and it turned out in the end it was the unit not the phone.
Hi
I had the same problem. It disappeared after a hard reset.
Here is the similar thread: http://forum.xda-developers.com/viewtopic.php?t=41270
Hi,
Does anybody else have a problem with microphone when loudspeaker is on during a call? Ive had quite a few people complaining that they cant hear me when Ive got the speaker on. As soon as I switch off the speaker, they can hear me fine. Does not matter if I place the mic close to me or move it further away, they still say they have trouble hearing me with speaker on.
Any ideas if I can resolve this? Have tried AGC setting with no success.
Thanks
I have the same problem for a while. Can't use speaker phone. It was working fine before so I am thinking some of the software that I installed render the speaker useless. I will try to backup everything and then do a hard reset to see if the problem still exists.
My Friend; I have the Same Case in my Kaiser and I post yesterday this issue but with no luck . we have to find a solution for this bugs, I tried something it might improve it a little ; during the call reduce the Speaker volume to be 2 degree only and it might help. But we have to know if it is a common in all devices or not
I tried the Hard reset but it is smae and no luck yet
I just tried the method proposed in abother thread here and it fixed the problem! I disabled the Microphone AGC in the phone setting and it works fine now. Save me some hassle.
are you sure of disable AGC as I tried but it is the same result
i have the same problem, and i don't have the auto mic gain enabled. i haven't hard reset yet, but it stopped working properly after i installed resco voice recorder and/or vito voice...
Looking at another thread, it may be that the speaker is half duplex. I.e you both cant be speaking at the same time. Wonder if this can be resolved?
My Kaiser comes by default Microphone AGC disabled, and the problem persists. Any suggestion???? thanks.
tsangwc said:
I just tried the method proposed in abother thread here and it fixed the problem! I disabled the Microphone AGC in the phone setting and it works fine now. Save me some hassle.
Click to expand...
Click to collapse
rocho said:
My Kaiser comes by default Microphone AGC disabled, and the problem persists. Any suggestion???? thanks.
Click to expand...
Click to collapse
Precisely you are right. I do not think by enabling/disabling the Microphone AGC does help. This is apparently a design fault. I have got my set replaced from the service center but still having the exact problem.
I wonder if HTC can fix this problem! I read from one of the threads somewhere that one of the users found the MDA Vario III works perfect...though they are also of the kaiser family....
wish2006 said:
Precisely you are right. I do not think by enabling/disabling the Microphone AGC does help. This is apparently a design fault. I have got my set replaced from the service center but still having the exact problem.
I wonder if HTC can fix this problem! I read from one of the threads somewhere that one of the users found the MDA Vario III works perfect...though they are also of the kaiser family....
Click to expand...
Click to collapse
Same problem, and i haven't modded mine at all. Using the default ATT ROM and tried speakerphone, couldn't be heard...
I had the same problem when using my TyTn and attempting to use the speaker phone. I was hoping this would be resolved in the TyTn II but it's the same problem where the person you speaking to complains they can't hear you properly.
I think its a common problem in this model as my device is brand new and same problem
Strange. I was making some tests last night, talking to another person using the speakerphone.
It worked just fine most of the time. Her voice was a little distorted due to the bad quality (maybe just bad equalization) of the speaker, but she told me she could hear me well. She told that even though I was speaking far from the mic and not that loud, the sound came just clear to her. The only thing she noticed was that I sounded like an answering machine .I also tested running some programs while speaking to her.. and then, coincidence or not, she heard some static for a second or two.
I also tested speaking while she was also speaking, and we both heard each other. It worked as a full-duplex.
I must say that it was late at night, so it was all silent. Except when my dog started barking, he was far away at the yard, and she heard him too.
I used it some days ago while driving, and she couldn't hear me. I had the radio on, and there was traffic sound and stuff. I had to turn the speaker off because I was driving and I was in a hurry, so I couldn't test any further.
Later on, I tested it with my girlfriend when we both were in my car and I was driving. She said she could hear me, but then it started echoing due to the loudness of my speaker, and that was all we could test.
I had Microphone AGC disabled in all tests.
I have the same problem... the other person cannot hear me when i am on speaker
i have the same problem!!!
This is a serious problem it appears most of us are having with the speaker phone microphone.
Has anyone logged this problem with HTC?
It looks like a s/w update will be required to fix?
I am using with an MDA Vario III UK and it seems to be working fine, I have not had any problems even after installing software or by having AVG on or off.
There is a problem if both parties speak at the same time where either person may not hear the other, I think that is to do with a duplex problem mentioned earlier in the thread.
It appears a number of people have the problem and a number do not. It may be software version related.
I am using the following software on an AT&T Tilt:
ROM version: 1.57.502.2
Radio version: 22.45.88.07H
We need to find a pattern with the problem, Can others share what software they are running and if they have the microphone problem?
Speaker problem is software
I can confirm that it is a software problem. When I recieved my MDA Vario III didn't had the speaker problem but as soon as I flashed my device with either the kaiser or tytn II rom the problem occured. Don't know how to solve it...
Anyone else got this issue and is there a new bluetooth stack or something to resolve it?
When I click the answer button on any bluetooth headset (currently using the iqua solar powered one), the sound is temporarily diverted to by mobile before the bluetooth properly picks up, and also during that slugging moment, any ringtone playing is diverted to the caller's earpiece (i.e. sent out by my mic).
One caller complained it had nearly deafened them.
Anyone able to help?
Having the same issue with my parrot bluetooth and my Tilt
Can someone purrlleeeease help with this issue? I am now scared to answer any calls, lest I get shouted at with, "GOD WHAT WAS THAT NOISE? IT NEARLY DEAFENED ME!"
You really haven't give a lot of info here.
I mean what Rom are you running, what BT hardware and reg tweaks do your use etc.
Info is required to be of any assistance.
Note my signature shows exactly what Rom(s) I'm currently using.
Many thanks. Here are my versions:
HTC TyTN II
ROM: 1.0 Sleuth
ROM date: 08/28/07
Radio version: 1.27.12.11
Protocol version: 22.45.88.07H
Essentially I think a new Bluetooth stack might solve it, but I really wish to avoid losing all data by flashing a new ROM altogether.
A new Bluetooth stack on its own would be wonderful... or a way to restore my data back to a newer ROM. Would Sprite Backup do that if I use Sleuth's WM6.1 ROM?
CJSnet said:
Would Sprite Backup do that if I use Sleuth's WM6.1 ROM?
Click to expand...
Click to collapse
I know the commercial version is supposed to support "Rom Upgrade" support but I'm not sure if that is in the version that is floating around the forums.
What you can do though is make a backup prior to upgrading.
Then upgrade to test if the problem is fixed in one of WM6.1 roms.
Then downgrade and restore your back-up.
Now you will know if there is even a point to expending the effort of trying to extract the BT Stack.
Don't take offense at this next statement but if you put forth that effort it might endear someone more skilled to your cause as you've provided a "Proof of Concept" so to speak.
Okay I have just upgraded to Sleuth's v3 (WM6.1). Sadly the bluetooth issue remains, despite the new Radio version.
If someone calls, and I answer using the bluetooth headset, for 1 second their audio is output to the speaker of the Kaiser. I believe it is during that second that they also hear the end of the ring tone, which is what deafens them.
An unsatisfactory workaround is to use a quite ringtone or vibrate only, but that is hardly ideal. If anyone knows of any other solution or a bluetooth stack that is a bit snappier when answering via headset, it would be great appreciated
CJSnet said:
Okay I have just upgraded to Sleuth's v3 (WM6.1). Sadly the bluetooth issue remains, despite the new Radio version.
If someone calls, and I answer using the bluetooth headset, for 1 second their audio is output to the speaker of the Kaiser. I believe it is during that second that they also hear the end of the ring tone, which is what deafens them.
An unsatisfactory workaround is to use a quite ringtone or vibrate only, but that is hardly ideal. If anyone knows of any other solution or a bluetooth stack that is a bit snappier when answering via headset, it would be great appreciated
Click to expand...
Click to collapse
Same issue here with the same new ROM.
I'm having the same problem. When I push the button on my BT HF it gives a horrible noise to the caller at the other end for a second. In my case I doubt it is ring tone, it doesn't sound anythin like the tone I'm using, it's just like loud crackling or smth.
I can't give you any version numbers cause by TyTN II is sent off to warranty (3rd time already). This time it stopped accepting and making calls while showing 3G symbol. Previously I had band selection on auto and had no problems. Now even after hard reset no calls could be made so off it went again. The first two faults where the speaker and the "Fn" light.
I am having the same problem, the handet is at HTC's repair facility for this and a few nagging issues. I will report what they find.
Mine isn't so much the ringtone it just sounds like a loud static sound. I thought it was the headset but I tried it with 3 different headsets and the Bluethooth in my car and they all have the same problem.
Got my phone back today and I can't say I'm impressed with HTC. First they requested that I send it in the original box then must have thrown it out and sent it in some crap box without enough padding. They didn't even send a note or invoice saying what had been done, which was nothing.
They claim they couldn't find anything wrong and when I called support the guy thought it a joke.
Needless to say it is still deafening and I am pissed.
Same Issue Here... It is almost as if there is a dely in cutting off the WAV/WMA file. Bluetooth Picks up and and both parties get the end of the ring tone.
Had the issued with the origional AT&T rom
Have the issue with Slueth 3.0 and Alex 5.2
If anyone finds a fix please let me know...
I am using PhoneAlarm - Don't know if that is related.
I've had the same complaints from some of my callers, and try to answer between rings as much as possible. The complaints have gone way down. Of course, we shouldn't have to jump thru hoops to answer our phones!
Does anyone have contact info to point HTC to this worrying thread? We need a patch release ASAP. A phone that can't answer calls properly? Yikes.
No issues with my BlueAnt Z9. Have you guys tried different headsets?
I think you may have just been lucky. It is uncommon to A) answer during the ringtone, and B) have the caller complain about the loud noise.
It happens on my Bluetooth earpiece, and Nokia car kit, and JVC car kit. So, it is for HTC to resolve.
I've tried three headsets and it happens on all of them. It happens even when I have the phone on vibrate.
I spent an hour on the phone with HTC support and they are awful, even after telling her that it happens on three different headsets she says that is sounds like a headset issue not an issue with the phone.
When I explained for the third time that I would agree if it happend with one headset but since it happens with all of the headsets it would support my arguement that it is an issue with the phone.
It was like talking to a wall. I wish I had an alternitive to HTC at this point, I love their design and have never had a problem with any of their other phones but this their lack of support is amazing.
I think its with all HTC phones. Happened with my Dash - Wing and now Tilt.
But I've never had anyone complain about hearing music on their end...I can just hear it on my headset for about 1 sec. I've also had my SMS tone play wile on a call and also my VM tone play while on a call and I've asked them if they heard that and they said no.
I also only use noise cancelling headsets.
VooDoo1 said:
I think its with all HTC phones. Happened with my Dash - Wing and now Tilt.
But I've never had anyone complain about hearing music on their end...I can just hear it on my headset for about 1 sec. I've also had my SMS tone play wile on a call and also my VM tone play while on a call and I've asked them if they heard that and they said no.
I also only use noise cancelling headsets.
Click to expand...
Click to collapse
I've never had a problem with any other handset, I've had a Qtek 9100, MDA, O2 Exec, Wing and a Dash.... crap I spent a lot on phones. The only one I've had problems with is the TyTNII.
Same problem here. And sometimes the speaker will very briefly go into speaker mode as I answer! Not good.
Hi all. I have just bought an XDA IIi. It works fine, except for the sound!! With the volume up to max, I can barely hear anything. I cant hear anything when I use the phone unless I turn on the load speaker, and even then, I can only hear a person talking, I cant actually hear what is being said.
Could this be a software problem? I un network locked my phone using xdadev_all_unlock.
Any clues will be greatly appreciated.
Thanks
XDA2i - Probs with sound
I've seen several threads which mention that sound on XDA2i phone has been lost after unlocking phone. Speaker still works when playing music (MP3 etc.) but cannot use microphone/speaker when trying to make calls.
Re-flashing doesn't solve it either. Sadly, no-one seems to have found a fix.
During calls there comes a moment that people are complaining that they cannot hear me. When i move the jog dial upwards (hence increasing volume) they say that they can hear me ok. I have not experienced this using the bluetooth headset. Maybe a hardware problem??
By the way i used 5 different radios and upgraded also to 6.1.
Anyone experiencing this?
Any solution?
I am wondering if any of u have experienced the same problem and got it fixed from HTC SUPPORT.
Thanks