Related
Anyone know how to add these icons on traybar just like Schap's ROM ?
applications called: Power & Wireless service Manager (shows Bluetooth/Wi-Fi on traybar)
I dont want to use homeplug or other trayluncher, thanks..
optiquest said:
Anyone know how to add these icons on taskbar just like other wm5/6 ?
Click to expand...
Click to collapse
no one can answer me?
optiquest said:
Anyone know how to add these icons on taskbar just like other wm5/6 ?
Click to expand...
Click to collapse
For the power, try this. Make a shortcut of the exe file in windows\startup folder.
optiquest said:
no one can answer me?
Click to expand...
Click to collapse
Settings - Today - Elements - Tick the box "HTCHomeplug" .. voliá
research12 said:
Settings - Today - Elements - Tick the box "HTCHomeplug" .. voliá
Click to expand...
Click to collapse
really thanks, but what I need is Power & Wireless service Manager (shows Bluetooth/Wi-Fi on traybar),
idea from Schap's ROM (for Hermes), hope someone can tell me how to do that to support on Kaiser ....
check here: http://forum.xda-developers.com/showthread.php?t=338946
RGDs, Optiquest...
hey, man! how about to search little bit? there is almost every day this question and it has been solved many times. here it is for a last time and hope mods will delete this kind of question if there are some new comming!
for tray launch apps use phm tray launch!
patr!k said:
hey, man! how about to search little bit? there is almost every day this question and it has been solved many times. here it is for a last time and hope mods will delete this kind of question if there are some new comming!
for tray launch apps use phm tray launch!
Click to expand...
Click to collapse
You dont get what I mean, i dont want any tray launch,
this application is called "Schap's Power & Wireless service Manager (shows Bluetooth/Wi-Fi on traybar)" , develop by Schap, just only need power_srv.dll and wirelessMgr_srv.dll and enable some register keys...
besides, this Wireless service Manager = WIFI+BT+Flight mode in a icon..
so now, u know what i mean now??
and sorry for my poor english...
now clear
are you sure, that you need only these two dll files? looks like it has own icon "advanced configuration".. did you try to contact someone from hermes section, to give you these two files + reg. keys?
patr!k said:
now clear
are you sure, that you need only these two dll files? looks like it has own icon "advanced configuration".. did you try to contact someone from hermes section, to give you these two files + reg. keys?
Click to expand...
Click to collapse
in fact, I got these 2 dlls from Schap's ROM and copy them (include power.exe) into my TYTN II, then import these 2 reg keys, now there r two icons on my kaiser's traybar, but, but, when I enable WIFI/BT/Flight mode,
only WIFI/Flight mode's icons show instead of wireless icon, so maybe need other dll reg. key i havn't found ...
I have asked Schap several times, even pm him, but still no answer, pity....
so only i can do is ask professional persons here...wow -_-
optiquest,
here is a full package of "advanced configuration". i tried to move it to \windows folder and run application, but there is an error msg. could you try and share your status?
patr!k said:
optiquest,
here is a full package of "advanced configuration". i tried to move it to \windows folder and run application, but there is an error msg. could you try and share your status?
Click to expand...
Click to collapse
everything woks fine on my kaiser...
ps: i use chinese version, and run on SD...
hmm, strange..
when i start that, i get error msg - in advanceconfig.exe there is an unexpected error. choose "end" and then restart this programm. if you want to get more information, choose "details"..
when i click "details" there is:
advancedconfig.exe
invalidcastexception
at system.convert.toInt32
iat advancedconfig.
at advancedconfig.
at system.windows.forms.form.onload
at system.windows.forms.form._setvisiblenotify
at system.windows.forms.control.set_visible
at system.windows.forms.application.run
at advancedconfig.
Click to expand...
Click to collapse
any ideas? did you used some special dll files? did you installed net compact framework? grrrrr- i wanna run this
patr!k said:
hmm, strange..
when i start that, i get error msg - in advanceconfig.exe there is an unexpected error. choose "end" and then restart this programm. if you want to get more information, choose "details"..
when i click "details" there is:
any ideas? did you used some special dll files? did you installed net compact framework? grrrrr- i wanna run this
Click to expand...
Click to collapse
I had problems like u before when i use Hermes..
Have u changed CommManager's details? or try to disable HTC home and try again..
ps: I use standard WM6, use its build compact framework..
change commmgr details? what do you mean?
i do not use htc home
hmm, did you exported some registry? what do you have setup in region settings?
patr!k said:
change commmgr details? what do you mean?
i do not use htc home
hmm, did you exported some registry? what do you have setup in region settings?
Click to expand...
Click to collapse
if I change commManager in Advanced config (eg: add 3G or del something etc), next time when I reboot pda, I will get some error there...
Advanced config for me is useless except enable cleartype, so I think KaiserTweak will be better when I want to change somethiing in Registry.
I can't use voice dialer when S2U2 locks phone, is there a way around this? I like the S2U2 application, but when I am driving and need to make a phone call via bluetooth handfree I can't, because s2u2 block the voice dialer.
I did look for a solutions via the search engine and in the s2u2 thread, but no luck thus far.
which device?
which ROM?
which voice dial app?
smittyofdhs said:
which device?
which ROM?
which voice dial app?
Click to expand...
Click to collapse
Thanks for your response,
HTC 8925 (Tilt)
Dutty's Touch AT&t beta 2
Cyberon Voice Speed Dial V1.2 build 070626
The newest version of S2U2 v0.95 offers a solution to this problem by adding the ability to use exceptions to temporarily disable S2U2.
1) Install the new version.
2) Run iLock2 to close the application.
3) Use a registry editor:
Under \HKEY_CURRENT_USER\Software\A_C\S2U2, find an open ExceptionEXE(0-9) (STRING). I used ExceptionEXE3. Enter the value: "SDDialer.exe" (this is the application that runs when you press the button on your bluetooth headset).
4) Run iLock2 to restart the application and you're done.
Thanks to tompol for discovering this solution. I first tried it by entering the value: "Voice Speed Dial.lnk", but this didn't work.
Hello,
i have another problem with S2U2 on my Kaizer, and i think i created it but cannot get through it. After i did some changes on the S2U2 settings now every time the lock goes on and even if i open the settings i get a black screen and can not do anything. If i press the power on button to turn off the screen and then on, i get the S2U2 screen but frozen, with out any animation! I have tried to remove and re-install the application but i get the same response from the program. Could someone give me some help, because i really like the application but can not use it...
TIA,
Nikos.
NikoS3 said:
Hello,
i have another problem with S2U2 on my Kaizer, and i think i created it but cannot get through it. After i did some changes on the S2U2 settings now every time the lock goes on and even if i open the settings i get a black screen and can not do anything. If i press the power on button to turn off the screen and then on, i get the S2U2 screen but frozen, with out any animation! I have tried to remove and re-install the application but i get the same response from the program. Could someone give me some help, because i really like the application but can not use it...
TIA,
Nikos.
Click to expand...
Click to collapse
did you turn on the directdraw option or safe mode option?
When you uninstall an app, it leaves behind the registry entries. As soon as you reinstall the app, those settings are in affecct again. Uninstall the app, use a registry editor to remove the following key, soft reset, then try to reinstall:
The key to remove is HKCU\Software\A_C
Ok, I had the exact same problem, the problem is indeed with D3D option, you need to disable it. As soon as it is off and the settings are saved, the program works fine once again, and smoother then previous version.
This part is gonna be hard to explain... but here it goes...
First thing to do is run ilock so that when u turn the screen off it doesn't start S2U2.
When you open the settings the screen freezes, like the kaiser crashed, but if you move down and you turn the screen off and on, you'll see the menu scrolled down.
Basically that means u're working blind, changes do occur but u can't see, so the process is to move it down, turning the screen off and on sistematically until u see the d3d option and turn it off, then save it.
Hope I explained myself enough.
Takes some work, but doesn't require registry tweaking and other settings are kept.
Keep posted on results.
Cheers, Esko
NikoS3 said:
Hello,
i have another problem with S2U2 on my Kaizer, and i think i created it but cannot get through it. After i did some changes on the S2U2 settings now every time the lock goes on and even if i open the settings i get a black screen and can not do anything. If i press the power on button to turn off the screen and then on, i get the S2U2 screen but frozen, with out any animation! I have tried to remove and re-install the application but i get the same response from the program. Could someone give me some help, because i really like the application but can not use it...
TIA,
Nikos.
Click to expand...
Click to collapse
Thank you both for your fast and details replies!!!
It was indeed the direstdraw option. It was easier for me to try eskostar's method, especially since i had tried the same blind procedure but i did not figure the trick with running the ilock first!!!
Everything worked out great!!! Now i can use this excellent program again!!!
Thank you again!!!
Cheers, Nikos
I have this problem. When I start S2U2 and miss call screen remains as it is when someone call (caller's number and slide to answer or two buttons with green and red phone). Whatever I push or click nothing happens. So I must softreset or turn off and on my Kaiser. Some tips?
Sorry I dont have that issue. However my problem with this version of S2U2 is when SLide to Answer is Active you can still use the Hardware Keys to answer!
Anyone no how to deactivate the Hardware keys during Slide to Answer?
MM
bersca said:
The newest version of S2U2 v0.95 offers a solution to this problem by adding the ability to use exceptions to temporarily disable S2U2.
1) Install the new version.
2) Run iLock2 to close the application.
3) Use a registry editor:
Under \HKEY_CURRENT_USER\Software\A_C\S2U2, find an open ExceptionEXE(0-9) (STRING). I used ExceptionEXE3. Enter the value: "SDDialer.exe" (this is the application that runs when you press the button on your bluetooth headset).
4) Run iLock2 to restart the application and you're done.
Thanks to tompol for discovering this solution. I first tried it by entering the value: "Voice Speed Dial.lnk", but this didn't work.
Click to expand...
Click to collapse
Thank you for your response, I will try this when I get back from vacation.
Sempai32 said:
Thank you for your response, I will try this when I get back from vacation.
Click to expand...
Click to collapse
Did this work for you?
Im having the same problem, but dont have a registry editor installed to test it.
LDJ said:
Did this work for you?
Im having the same problem, but dont have a registry editor installed to test it.
Click to expand...
Click to collapse
yeah it works, get a reg editor and do as stated, it works.
Just saw this, and now it won't lock on it's own now that I did the regedit.
???
CocheseUGA said:
Just saw this, and now it won't lock on it's own now that I did the regedit.
???
Click to expand...
Click to collapse
if any of the apps in the exception list are running, not just in the foreground, even if they are running in the background, then [email protected] will not enable. Check your exception list, make sure none of those apps are currently running, then try again. If you still have issues after that, then it's with S2U2, not the exception list.
smittyofdhs said:
if any of the apps in the exception list are running, not just in the foreground, even if they are running in the background, then [email protected] will not enable. Check your exception list, make sure none of those apps are currently running, then try again. If you still have issues after that, then it's with S2U2, not the exception list.
Click to expand...
Click to collapse
Very well done.
Apparently Internet Explorer was still running, and as soon as I closed that it ticked off. May consider removing that key, as I don't see why I would need it.
Thanks.
CocheseUGA said:
Very well done.
Apparently Internet Explorer was still running, and as soon as I closed that it ticked off. May consider removing that key, as I don't see why I would need it.
Thanks.
Click to expand...
Click to collapse
Good deal, glad it worked for you....
when I install S2U2 (i go thru phases where I want it, then phases of "get it off my Tilt") the first thing I do is remove the exception for PIE.
FYI.... Likewise, if you run any of the Cube or TouchFlo variants out there, you will need to put an exception into the TouchFlo settings for S2U2. What happens if you don't is when you try to slide to unlock (or slide to answer) you end up invoking the Cube or TouchFlo, instead of S2U2. Just an FYI for you....
Thanks for the tip. Am still looking into wicked programs so far, only had it two weeks and it's already been through the mod ringer.
CocheseUGA said:
Thanks for the tip. Am still looking into wicked programs so far, only had it two weeks and it's already been through the mod ringer.
Click to expand...
Click to collapse
that's the way to do it. I've been using PPC devices for years and years and everytime I get a new one, I try every hack, reg edit, tweak, and app possible.
I searched and found a ton of "How do I customize the sliding keyboard sounds". But I am running Alex's multimedia ROM, and for the life of me can't figure out how to get the stock sliding keyboard sound back on my Tilt. I don't even have the option to turn it on in my settings anymore. It just appears to be gone.
Am I missing a setting? If not, is there a .cab to reinstall the sliding sounds option?
Thanks
over2land said:
I searched and found a ton of "How do I customize the sliding keyboard sounds". But I am running Alex's multimedia ROM, and for the life of me can't figure out how to get the stock sliding keyboard sound back on my Tilt. I don't even have the option to turn it on in my settings anymore. It just appears to be gone.
Am I missing a setting? If not, is there a .cab to reinstall the sliding sounds option?
Thanks
Click to expand...
Click to collapse
http://rapidshare.com/files/79748184/SH4Y_Sliding_Sounds_Configure.cab
over2land said:
I searched and found a ton of "How do I customize the sliding keyboard sounds". But I am running Alex's multimedia ROM, and for the life of me can't figure out how to get the stock sliding keyboard sound back on my Tilt. I don't even have the option to turn it on in my settings anymore. It just appears to be gone.
Am I missing a setting? If not, is there a .cab to reinstall the sliding sounds option?
Thanks
Click to expand...
Click to collapse
Try this CAB.
SH4YD33 said:
http://rapidshare.com/files/79748184/SH4Y_Sliding_Sounds_Configure.cab
Click to expand...
Click to collapse
Thanks, but isn't that to modify existing sounds?
wpbear said:
Try this CAB.
Click to expand...
Click to collapse
WP, that did it. Thanks. I did notice a slow down in regen when the screen is going from portrait to landscape though. However, I end up with the link in settings/personal, and the same sounds I had before I flashed.
I am using Alex ATT MM 1.6 and the sounds work too, but I dont see the link in settings/personal.
EDIT: Reboot and found it.
hello seniors,
http://rapidshare.com/files/79748184/SH4Y_Sliding_Sounds_Configure.cab this file does what? is it the software that allows the phone play a sound when opens and closes? OR is it configure the sound of the sliding keyboard? if i hd the software of keyboard sliding sound built in when i got this phone do i need to install this .cab? thanks
ysw
total noob needs help with missing sliding sounds.
Hi I just downloaded the Tilt_SlidingSounds.CAB.
I then unzipped it on my computer and moved the folder containing the filles to my Vario III and put it in the windows folder. Using file explorer I found the folder opened it and hit setup. it worked but the sliding keyboard sound tweaker was placed in the windows folder too. So not saticefied with this I moved over the whole zip file to my phone and put it in my personal folder where I exicuted the cab. owever I could still only find it near the bottom of the windows folder and I want it in the settings/personal where my original one used to be before the phone got sent off for repair.
Although this tweaker works it only has 3 sounds to choose from. Is this right too?
Please give advice to all of this I am eager to learn and am still searching through the FAQs
Thanks
Hansaw
Hello all,
sorry for my bad english
Some how, my diamond doesnt makes alert sound when a new text message is recived. Every other event makes sounds perfectly.
I set it to make a sound and vibrate in the old winmo interface.
I found no option like this in diamond tweak or advanced config
(thos programs has only ringtone change option - and my diamond ring just fine. I used advanced config to set it to wake up when a new message arrives.
What can be the problem.
Same problem here, but with new MMS. SMS notification works normally.
MMS work with the new ROM.
But the MMS notification has no sound and no vibration, even if checked in the settings.
me again
I just found out that the same problem happens when I get a new Email message - the device makes lights but no sound even though I set it to at the events area in windows mobile settings. When I press the play buttin there it playes the sound perfectly.
HELP PLEASE
Had the same problem, I managed to set an inbuilt ringtone. Maybe it is not as good as my own, but at least I can hear anything. Search for it.
Is the Wake up from new SMS enabled?
it is enabled
maurophp said:
Is the Wake up from new SMS enabled?
Click to expand...
Click to collapse
yes it is, but it does not seem to be working.
when i get a nes sms or email the phone just lights its round button.
and i am using a builtin ringtone. it calles Alert-Glass2
maurophp said:
Is the Wake up from new SMS enabled?
Click to expand...
Click to collapse
where can i enable wake up on new SMS?
murata said:
where can i enable wake up on new SMS?
Click to expand...
Click to collapse
you need diamond tweak for that - but as i said, it doesnt seem to work
help
ididid said:
Hello all,
sorry for my bad english
Some how, my diamond doesnt makes alert sound when a new text message is recived. Every other event makes sounds perfectly.
I set it to make a sound and vibrate in the old winmo interface.
I found no option like this in diamond tweak or advanced config
(thos programs has only ringtone change option - and my diamond ring just fine. I used advanced config to set it to wake up when a new message arrives.
What can be the problem.
Click to expand...
Click to collapse
Please Help ME...
ididid said:
Please Help ME...
Click to expand...
Click to collapse
I had problems with AZTOR rom and now i using Vic rom and i have no more problems with SMS.
maybe you can also try it.
rom cahnge
Cant change rom. If ill do it i will lose my importer warranty.
ididid said:
Cant change rom. If ill do it i will lose my importer warranty.
Click to expand...
Click to collapse
could you tell us wich rom version you are using at the moment
I am using Alarm4 if this does matter.
Tried my procedure?
kosherpig said:
1. Open TF3D Settings tab
2. Choose Sounds
3. Toggle last option two times (so it goes back to your current passing another)
4. Click More (right softkey)
5. Go to the second tab
6. Choose New SMS sound
7. Select some inbuild ringtone
8. Click OK
9. Repeat steps 4-8 skipping step 7
10. Test it.
Click to expand...
Click to collapse
me again
murata said:
could you tell us wich rom version you are using at the moment
Click to expand...
Click to collapse
ROM: 1.93.456.2 WWE
date: 7/10/08
ExtROM: 1.93.456.21
sorry for my bad english...
actually, i ever had this problem before, it is:
in the events area in windows mobile settings. if you press the play button, it playes the sound perfectly, but when a message is received, there is no alert sound...
that's because i changed the sms mode from "chat mode" to the traditional one (i just don't know how to express this, but i think you can understand) and when i change this back to normal, the sound comes back again
hope this can be helpful
Are these not working ringtones in MIDI format?
Just noticed setting a certain MIDI ringtone makes all MIDIs for this event fail.
(I switched to WMA and I am happier than with MID )
enable vibra
ididid said:
Hello all,
sorry for my bad english
Some how, my diamond doesnt makes alert sound when a new text message is recived. Every other event makes sounds perfectly.
I set it to make a sound and vibrate in the old winmo interface.
I found no option like this in diamond tweak or advanced config
(thos programs has only ringtone change option - and my diamond ring just fine. I used advanced config to set it to wake up when a new message arrives.
What can be the problem.
Click to expand...
Click to collapse
TRY: settings --> sounds¬ifications --> notifications (tab) --> Event: Messaging: New text message and check the "Vibrate" checkbox. Worked for me after updating rom 1.97 to 2.03
the in-call "Slide down for more options" curtain
does anyone know how to turn this feature off?
i've searched and there are a few threads on this
but with no answers.
thanks in advance
I need this aswell, Could it be fixed with a registery edit?
I'm guessing you guys have done the same that I've done loads .... pulled the slider the wrong bloody way and hung up on people ? ?
I have to keep remembering to use the answer button not the touch screen.
I have searched some more, Without an actual solution,
Still I think it should be 'fixed' by a registry edit.
Can anyone give a concrete answer?
I remember when I used my HTC Touch Elfin, Some roms had the 'curtain' and some didn't, though it were 'the same dialers'
Sorry for the double post, But, Bump?
Anyone?
u can set the delay
HKEY Local Machine/Software/HTC/Phone/Cover/ResumeInterval
Default is 5000
So, To what should we change it to disable it?
0?
No not "0" Set it to "999999999999" or something. Tried many things like make an registry key EnablePhoneCover etc but nothing works
999999999999 would disable it completely?
jeutie said:
999999999999 would disable it completely?
Click to expand...
Click to collapse
No but you only have to slide down once. I have installed the screenoff tweak every time i make a call the screen turns of but the slider is not coming back
Oh ok ^^ Ty mate Will do for now...
But I still think there is a better way to do it, cause some diallers on custom roms do not contain the curtain, But are the same diallers.
I now but this was not with the new Topaz
I tried everyting in the registry but no luck so far
It's been 40 days since the last post. I was wondering if someone came with a fix for it by now?
I don't need this curtain. I want to have all the call options to begin with on my Diamond2 Just like I had it with my old Touch Pro. I don't want the curtain to show at all! I don't want to slide it down even once, Just to completely avoid it alltogether.
Sir.B said:
the in-call "Slide down for more options" curtain
does anyone know how to turn this feature off?
i've searched and there are a few threads on this
but with no answers.
thanks in advance
Click to expand...
Click to collapse
I noticed that installing Rhodium Dialer from CAB which I prepared disables curtain (and enables landscape and coference modes for dialer). The problem is that installation of this takes about 18mb of storage memory.
I'm thinking of creating my own ROM (as I did for Omnia ) based on 6.1 with Flashlite3 support in Opera and full landscape support cooked inside (using Rhodium components) .
qbus00 said:
I noticed that installing Rhodium Dialer from CAB which I prepared disables curtain (and enables landscape and coference modes for dialer). The problem is that installation of this takes about 18mb of storage memory.
I'm thinking of creating my own ROM (as I did for Omnia ) based on 6.1 with Flashlite3 support in Opera and full landscape support cooked inside (using Rhodium components) .
Click to expand...
Click to collapse
Which dialer? I don't mind 18mb if I can put it on my storagecard...
jeutie said:
Which dialer? I don't mind 18mb if I can put it on my storagecard...
Click to expand...
Click to collapse
No, you can't - this is integral part of phone and files must be put into \Windows folder.
Dialer can be found here: http://forum.xda-developers.com/showthread.php?t=535904
qbus00 said:
No, you can't - this is integral part of phone and files must be put into \Windows folder.
Dialer can be found here: http://forum.xda-developers.com/showthread.php?t=535904
Click to expand...
Click to collapse
Alright, I'll do it anyways x)