Database Develop

QTEK 9090 change ESP to WWE

I need help, please!
I got a Qtek 9090 in Spanish and I would like to have it in English.
I tried to follow the steps described in
http://wiki.xda-developers.com/index.php?pagename=BA_GettingStarted
but I cannot find what version is the one I need to download.
The Device Data I have is the following:
model no: PH20B
minor version model no: 0 B
language code: ESN
minor: N
operator code: DANGA304
rom version: 1.22.03
minor: 0 3
extended rom version: 1.22.132
radio version: 1.06.00
minor: 06.00
Can anyone tell me if there is a WWE version I can download to upgrade my device into English language?
Thanks for help
Matoha

wiki has a new topic.
How to upgrade to the latest rom
Have you read it?

Yes, I checked that topic and that is where I found the steps I need to follow to upgrade my qtek. However, I need to find the right version to download it and install it in the phone.
In the topic they explain that the version has to be higher than my rom version and my radio version and I don't find any WWE file that has a rom version higher than 1.22.03 and radio version higher than 1.06.00.
Does it exist? Where can I find it?
Thank you for your help.
Matoha

Read here:
http://wiki.xda-developers.com/index.php?pagename=BA_1.40.00_Upgrade
Download the I-Mate 1.40 WWE Rom.

thank you for your reply,
but, please, can you tell me what is the difference between the i-mate, qtek and dangaard version. Remember I have a qtek 9090, is the i-mate version the best for me? I am afraid of doing something wrong that can ruin my phone.
Thanks again
Matoha

Its all in the ext rom, check wiki, read about the ext rom, have a look at the ERK of those 3 roms.

Well, changing the language of your device is not supported and will void the warranty of your device anyways, so it doesn't matter which carrier's rom you put in.
Personally, save the same problems as the other 1.40 roms, and with the solution I found to the GPRS problems, the i-mate extended rom is the best, especially for someone who likely will not be cooking a custom one.

Hi guys,
I downloaded the i-mate version and I followed the steps, extracting the files, changing the fix.bat but when I run the upgrade I get the following error:
error 123: radio image file checksum error. the rom image file to be used for the update is corrupt. Download the correct rom update and try again.
Is it because any of the passwords in the fix.bat is wrong?
Is it because I should use another rom?
I tried with the Qtek and Daangard versions and I always reach to the same point.
Any idea?
Thank you
Matoha

Did you try the first method outlined here?
http://wiki.xda-developers.com/index.php?pagename=BA_1.40.00_Upgrade
First Method (Quicker/Easier, but not well tested)
1) Download update to desktop
2) Unrar or unzip all files in exe or rar into a new folder
3) Open the folder with the extracted files
4) Download this file: MaUpgradeUt_noID.ZIP (ftp://xda:[email protected]/BlueAngel/Tools/MaUpgradeUt_noID.zip)
5) Extract MaUpgradeUt_noID.exe from this file and place it with the other upgrade files.
6) Continue to upgrade as normal, except run this new exe file instead of BaUpgradeUt.exe

THANK YOU VERY MUCH!
I manage to do it with TheLastOne explanations.
Matoha

I'm glad I could help.
Enjoy the improvements of 1.40 (although limited, IMO).

PLEASE HELP!!! i need help upgrade to the New Radio 1.13.00

Please i need help to upgrade to the new radio rom. i have a siemens sx66 from cingular. i tried to upgrade it but i always get an error.

Hi aih1977,
Please read the wiki. Cheers ^^

Hi khngaroo
i did but i still get an error

Same issue here
Hi guys,
Actually, I have the same issue. As far as I could see, the Wiki doesn't address the "123: Radio file checksum error" that I receive when following the directions. I follow the directions for using the downloads which doesn't go, then I use the files from the Siemens SX66 Upgrade as suggested.
Any thoughts? Thanks.

ever thought about reading the other threads ?
http://forum.xda-developers.com/viewtopic.php?t=23814

Hum
Lets see the wiki 1.40 upgrade is in the first place a TPYE II upgrade.
Now if you spend sometime and READ the page you will see that there are 2 ways of doing a 1.40 upgrade. One is the whole rom in its type II format the other is just the CE and the radio Type I.
How ever if you don't read the page and think you are got it all worked out then you use the fast option, thats the MA_noID tool (Type II), then download the radio 1.13 which Is a type I but who cares about that any way....then you run the bugger and get a checksum error what the hell have I done now error.
Please correct me if I am wrong so that I can correct the wiki page.

MDAIIIUser,
Yes, I have thought about reading the other threads. What was not obvious to me was that I need to upgrade to the 1.40 ROM to be able to upgrade to the 1.13 Radio. Forgive me if I missed this.
Thanks for pointing this out. I'll start over and review all the 1.40 ROM threads.

lungbutter
You dont need to upgrade to CE 1.40 for the radio 1.13.
Just go to wiki and follow the radio upgrade page. It worked for me and many others.
Now if you want to upgrade to 1.40 then do that also on the wiki page, this will however give you the radio 1.12. (unless you read the whole of the page and understand the getting started section of wiki as in how to use fix.bat)

i tried everything can someone set up the files and link it so i can download it. i think im doing something wrong.

Can you click on the link in my signature?

Arg! Lost my post twice.
Anyhow, MDAIIIUser,
Ok. So the 1.40 ROM is not needed. That was my initial impression. I thought you were referring to reading the 1.40 ROM threads.
I also saw that many users were able to upgrade with no problems. That's why I was suprised when I received the checksum error after reading the 1.13 Radio threads and exactly following the Wiki several times before I gave up. I must have missed something because it seemed like the Wiki steps should've worked no problem.
I haven't found anyone posting that has upgraded the radio on a Siemens SX66 yet. I'm wondering if it's Siemens-related which is why I jumped on aih1977's thread (sorry ).
I'll start over and review the threads and directions, etc.
Thanks for your reponses.
lb

so you are saying that
http://wiki.xda-developers.com/index.php?pagename=BA_Radio_1.13_Upgrade
does not work for you as you have a SX66.
This could be due to the fact that your device has no camera and the header of the rom is for a camera.
I have never read about having to fix the header for a radio upgrade, its a first for me but I can learn.
Please confirm
1) By following the link above I get an error
2) the error I get is the following
3) My rom at the moment is.

The new Radio ROM does work on a SX66 if you folloe the directions. If you have an issue use the upgrade files that you used to upgrade 1.40. Your going to get an error the 1st go around but then it will run smoothly the 2nd try.

MDA,
I'm running 1.13.00 radio on my SX66...
-Chris

Dear MDAIIIUser,
Correct me if I am wrong. All this while, from what I've read through the forum, my understanding is that MA_NoID can only be used to upgrade type II ROMs. If so, I must confess that I've upgraded my radio to 1.13 (type I) with MA_NoID... And it worked... Any clue?
Cheers ^^

Ok i just want someone to help me with upgrading the radio and if someone out there upgraded the radio please link it or pm me with the files that you used to do it.
Thank you.

MDAIIIUser,
Okay, I was able to get the radio stack upgraded to 1.12. Here's what I did. I'm sure it's pretty ugly and probably not the easiest way but:
Followed the Wiki again with errors as follows:
After step 7, running BaUpgradeUt I received the "Error 100: Model ID Error".
After step 5 of the second set of instructions, I received: "Error 123: Radio Image File Checksum Error". No joy.
So I then took the iMate 1.40 ROM image and extracted the files, deleted the ms_.nbf and nb_.nbf and ran MaUpgradeUt_noID.exe. It errored with Error 120: Country ID Error. The phone was still in USB mode so I reran MaUpgradeUt_noID.exe again and it successfully updated the Radio to 1.12. I tested the phone calling my voicemal with no problems.
I then replaced version 1.12 with the 1.13 version. I ran BaUpgradeUt.exe and recieved the "Error 123: Radio Image File Checksum Error" (this is using the files from the 1.40 ROM with the 1.13 radio file). I then tried running MaUpgradeUt_noID.exe again. The device software update utility showed no information in the from or to sections of the dialog box. It doesn't throw the phone into USB mode and after a minute or so it offers congratulations thinking it upgraded the phone.
I then went back to the 1.13 Radio files I downloaded and ran MaUpgradeUt_noID.exe. I received the Error 100: Model ID Error".
I reran MaUpgradeUt_noID.exe and received an error that it coundn;t find the ruu.conf file so I renamed the htcruu.conf and htcruu.dll ruu.conf and ruu.dll. I reran it and it would attempt to update the radio, then timeout. I received a communications error (which I didn't record) then tried to soft reset the phone. It was stuck in USB or Serial mode. Cold boot no worky either.
I then reflashed back to 1.12 successfully. I will try to update to 1.13 later tonight or tomorrow.
Here is my phone info. before the update:
Siemens SX66 Cingular
Model No: PH20B1
ROM Date: 01/21/05
Radio Version: 1.02.10
Protocol Version: 1337.35
Ext. ROM Version: 1.33.110 WWE
Thanks for the responses. I'm sure that there's an easier way but I'm happy to be at least 1.12.
lb
Edited: Type on filenames.

God are we having fun.
And Boy am I lost.
This is what I can work out.
You flashed the i-mate rom 1.40 radio 1.12 got errors and re ran it it was fine. Thus you have a 1.40 with radio 1.12
Now you are stuck. you want to flash the radio 1.13 (Type I) using the wiki info and you get error that tells me that you have the wrong device. The file is for a device with a camera you dont have that.
You try the MA_tool which wont work as its for type 2 and gives you a checksum and your stuffed again.
You seem to be the first person that has come up agaisnt this thus we need to upddate wiki with new info.
I have a problem with this as the 1.12 was a type II to Type I convert that I made, nobody had a problem with that before.
So as I asked you to confirm what you have and you have not done that I will ask again.
Please confirm
http://wiki.xda-developers.com/index.php?pagename=BA_Radio_1.13_Upgrade
1) By following the link above I get an error
2) the error I get is the following
3) My rom at the moment is.

OK i did everything i just want the files that someone used to successful upgraded there siemens sx66 from cingular to the new radio 1.13 rom. so i can upgrade my siemens sx66.
SO PLLEASE CAN SOMEONE HELP!!!

MDAIIIUser said:
So as I asked you to confirm what you have and you have not done that I will ask again.
Please confirm
http://wiki.xda-developers.com/index.php?pagename=BA_Radio_1.13_Upgrade
1) By following the link above I get an error
2) the error I get is the following
3) My rom at the moment is.
Click to expand...
Click to collapse
MDAIIIUser,
Sorry for the confusing post. I wanted to provide some detail. Answers are as follows:
1) Yes.
2) ..."Followed the Wiki again with errors as follows:
After step 7, running BaUpgradeUt I received the "Error 100: Model ID Error". After step 5 of the second set of instructions, I received: "Error 123: Radio Image File Checksum Error".
3) Siemens SX66 Cingular
Model No: PH20B1
ROM version: 1.33.10 WWE
ROM date: 01/21/05
Radio version: 1.12.00
Protocol version: 1337.42
ExtROM version: 1.33.110 WWE
I believe that I don't actually have the 1.40 ROM. From the directory in whcih I decompressed the iMate 1.40 ROM (PDA2k_WWE_14000_176_11200.exe) I removed the ms_nbf and nb_.nbf files and left the radio_.nbf file, which I believe will only flash the radio, then updated.
Is that less confusing?
Thanks,
lb
aih1977,
We are actually trying to determine what the issue may be to update your radio on the SX66. Hang in there!

HELP LOCATING ROMs , UPGRADING ROM, XDA 2s lls

I'm sorry, I've searched and searched & been at BA_Begginers for the last 5 hours, where can I get latest more stable ROMS from? I've been advised to get the iMate 1.40 WWE ROM, but cant find it or links to it on this site, I've registerd at iMate but they have not sent an email so i cant download from there site any links?
or any ROM links for my XDA lls from UK o2 in 2004.
Currently Running :
PH20B 0 B
WWE E
O2___001
1.31.00 0 0
1.31.139
1.06.00 06.00
SHIPPED DEVICE INFO:
ROM VERSION: 1.31.00 WWE
ROM DATE: 13/12/04
RADIO VER: 106.00
Protocol VER: 1337.38
ExtROM V: 1.31.139 WWE -
I Need Links to PocketPC2003 or WindowsMobile2005 ROMS many thanks!

Hi.
Sorry but I simply don't believe You spent 5 hours at wiki and not clicked this:
ftp://ftp.clubimate.com/PDA2k_WWE_14000_176_11200.exe
to get an update.
In case, your device is not exactly i-mate pda2k (but another Blueangel) you'll need to replace baupgradeut.exe supplied with above archive with the one I give you (to bypass country/device id check)
Good luck

oops.. delete

thank you very much, i tryed a very similar link to imate firmware on the BA begginers page but it dosnt work at all, i spent most of the time trying to get registerd properly at imate only to be told to go away as i dont have a imate branded device. thanks again i'll give it a go.
In case, your device is not exactly i-mate pda2k (but another Blueangel) you'll need to replace baupgradeut.exe supplied with above archive with the one I give you (to bypass country/device id check)
Click to expand...
Click to collapse
i have downloaded the file you added to replace the the one in the imate rom, will replace then add it to XDA, where is the dummys guide to installing this particular ROM? i'll look again on the wiki page.

There should be some kind of 'step by step' in BA's wiki.
But in truth, the process is very simple.
Just download file from i-mate. Run it. (It will extract files to directory specified). Replace baupgradeut.exe with the one I gave you and run it (baupgradeut.exe).
On screen step by step displays and tells how to put device in bootloader mode and place in cradle etc.etc. simple
have fun

Pls help - XDA & Error 100 (Upgrading to WM5)

Hi,
i was using xda 2s, with WM5 (old-build) and several months ago, unaware followed this link:
http://forum.xda-developers.com/showthread.php?t=274505
somehow, i've managed downgrade to WM2003SE again,
using this link:
http://wiki.xda-developers.com/index.php?pagename=BA_Downgrade_WM5
(ROM: 1.40.00 WWE
ROM date : 03/10/05
Radio: 1.12.00
Protocol ver: 1337.42
ExtRom: -blank-).
running this version the Bluetooth cannot run, 'license expire'.
Later, I want to try the new ROM (looking for the one with direct push-mail feature) of HELMI in this link:
http://wiki.xda-developers.com/index.php?pagename=Helmi.
When running BAupgrade, received error:
Error 100: Model ID Error 25-N-10-N-N
("the ROM image that you are trying to use is not designed to work with your divice. please check the vender web site and download the correct ROM update")
then tried to run with MaUpgrade, it seem work, but no upgrade at all.
Somebody pls help..
Thank you very much.

u need to use MaUpgrade_NoID instead. it should be on the wiki website somewhere.
also remove the SD card from the slot before doing the upgrading.

Unfortunetely, MaUpgrade_NoID did not work..no upgrade at all..
is it normal if 'Ext ROM : -(blank)-'?
from Start - Settings - System - Device Info
thank-u

Having problems updating radio on SX66 (Blue Angel)

Hello, I upgraded my Blue Angel (SX66) to WM6.1 last week. I wanted to upgrade the radio from 1.02 to 1.15 but I have not been able to. I keep getting Error 101 (disconnect).
The device information shows the following info about my device:
Operator version : WM6.1PPC Phone
ROM version: 6.141WWE HT4.20
ROM date: 09/18/08
Radio version: 1.02.00
Protoco; version: 1337.32
ExtROM version: Black Kernel
Model No: PH20B1
Also, the RUU mode on my device shows BlueAngel and by USB mode is v2.06. I checked the beginners' section on this site and tried every possible trick (bootloader mode, modifying the country, etc). So, far nothing has worked. I would appreciate some guidance on this matter. Thanks!

remember the folder that you use when you upgrade to the latest ROM? Copy that same older on a different location on your PC and then open it and just delete the nk.nbf file and replace it with the latest radio rom which is 1.15.00 for BA and then run the same process, make sure the activesync is not running and your BA is in bootloader mode. Hope this helps.

Still having problems updating radio on Blue Angel
Thanks for the reply. However, that is still not solving my problem. I getting ERROR 101. CONNECTION ERROR. I tried the BAupgradeut in Bootloader mode. and I get the same problem. I read about a utililty called ROMupdate11a.exe and tried it, but it is still not working.
I wish I would've realized how difficult this process is. I would've made an effort to buy a Blue Angel device w/ updated firmware.
PS: I have read the Blue Angel beginners' section and the wiki and tried (to the best of my ability) to try all the tricks listed there. This is why I hope someone out there has experienced and solved the same problems I have.
Thanks again. I will keep looking, and hoping for a solution.

have you tried MAupgrade_UTL??? Ok like this, try to revert back your BA's ROM to wm2003se first, then do the Radio upgrade and afterwards upgrade to the latest ROM

I think I know why I cannot upgrade radio
I suspect that my Blue Angel's BIOS is damaged. I used the GetDeviceData to find get exact ROM for my PH20B1 device (see attached). I used to get PH20B1 on the DeviceData.txt file. Now I get a lot of garbled characters in the section where the model # used to be. Also, when I go to Device Information (under the WM6 settings section), I see the same garbled characters where the Model No section is.
I also cannot find the Country section. This may also explain why my phone fails to recognize any ROMs (even those flagged as WWE --- from the USA). That is not good, I think.
My fear is that my device will not accept any ROM updates (or downgrades). Does the above make sense? If so, have I messed up my Blue Angel for good or is there still hope? Thanks.

Never mind, problem solved. Thanks!!!
Hello again. I just wanted to let you all know that my Blue Angel is OK (finally). A friend of mine, who also has an SX66 successfully applied the Radio 1.15 ROM upgrade (after he unlocked my device). I am all set now. Thanks for your assistance and guidance.