Hi!
Back in the days with my old TyTn I used to use SPB Pocket plus' today screen plugin with a big TURN SCREEN OFF BUTTON on the screen and whenever I was done I would hit the button and turn my screen off. The problem is that this program comes with a lot off other stuff that I don't need. Does anybody know a small today screen plugin with a TURN THE SCREEN OFF capability
Related
I have an un-locked TyTn II that has an annoying screen problem. At least once a day, the touch screen will stop working. The device continues to function normally using buttons and/or the keyboard, but the touch screen function is dead.
In every case, I have been able to revive the touch screen by using buttons to navigate to the screen alignment settings and then use my finger to scroll around the screen till it comes back to life. Once the screen alignment program comes back to life, I align the screen and go about my business.
I have a fair amount of Spb software installed, but I had the same problem before installing any of the Spb software, so on the surface, I'm ruling that stuff out.
I have Kaiser Tweak and Paul's Tweak installed.
Any idea's would be greatly appreaciated.
Maybe this thread will help?
http://forum.xda-developers.com/showthread.php?t=337979
Thanks for your reply.
The thread you provided appears to be focused about "complete" freezing. My device continues to work as long as I use buttons and/or the keyboard. Once I align the screen, the device goes back to normal operation.
I know that many of you have disabled the "Fast Sleep" mode while making a phone call. Well what I'm wanting to do is just the opposite, disable (or lock) the touch screen entirely while making a call. The problem I'm having is that when talking on the phone I always end up touching the screen with my cheek and either accidentally end the call, call someone else, or whatever. I would like to have a utility which would lock the touchscreen maybe 5-10 seconds after a call is established. One of the hard keys or an i-pod type slider function would unlock the screen.
Does anyone know of a utility like this?
I do have the "fast sleep" mode enabled within Kaiser Tweeks. However, while the fast sleep mode turns off the screen to save battery power, it still wakes back up with just a touch.
I have an AT&T Tilt.
I've seen some discussion of S2U2 on this forum, but it appears that S2U2 is a whole new today screen. I would like to keep my today screen unchanged. I only want the screen to lock during a call.
NZuercher said:
I've seen some discussion of S2U2 on this forum, but it appears that S2U2 is a whole new today screen. I would like to keep my today screen unchanged. I only want the screen to lock during a call.
Click to expand...
Click to collapse
It is a lock not a today replacement. That is what I use.
Thanks parleyp, I guess I'll give s2u2 a try. The info that I've seen just seems rather complicated when all I need is a simple lock utility. Why is there discussions on s2u2 affecting the weather tab, clock display, background, etc?
Which version are you using on your tilt?
Would you be interested in something like that??
If so search for opal dialer in kaiser Rom development subforum.
I am fairly certain that you can just press the "power" button and shut the screen off. When you are ready to hang up, just hit the end button. This is not automatic, but it works for me.
yea, i was gonna say: what's wrong with just pressing the power button?
Been toying with my Today screen for ages and am nearly satisfied but after changing the order of a few items on the today screen my 'wireless' plugin no longer works.
It appears on the screen ok, but instead of a press turning the wi-fi/bluetooth on or off, it takes me directly to the 'communications' menu - as if it's locked somehow...
Can anyone help with this problem?
Cheers
Answered my own question. This behavious was because I was using it with the HomeScreen++ - with that re-activated as is well .
Just got the diamond2 and am loving it. Came from the touch pro. Problem is I have been pocket dialing while its in my leather case. This is not good, as I am a real estate salesperson and it is calling some important people. Does anyone have a solution? BTW, I was using touch lock pro on the touch pro.
Thanks!
hi lorettaboy
you should lock the kets by holding the end call button for a few seconds and that should sort your problem out
I forget what it's called but there is this locking software that will completely lock the phone if you rotate it around the long axis one way and unlock if you do the same the other way.
I have been using throttle lock though. It is like the Android unlock screen where you draw patterns.
If u press the power on/off button for a second, the screen goes off.....isnt it ok to avoid your problem?
Kinto said:
If u press the power on/off button for a second, the screen goes off.....isnt it ok to avoid your problem?
Click to expand...
Click to collapse
I think what may be happening is that the power button is being pressed while in the case unlocking the phone and keys. I had this happen before and still does sometimes when in my pocket.
4 characters: S2U2
Hoping wm6.5 features a lock that's as functional as S2U2.
I personally use http://pocketshield.netserver01.com/ It locks your phone when its closed, and you have different ways to 'wake' it. the 3 that I set it currently is:
1. if the phone is in the case (aka dark) it will not unlock even if phone is ringing, but once you remove it from the sleeve/pouch it will be unlocked.
2. If its night time and the above prevents you from unlocking in the night, shaking phone left to right once will unlock it
3. lastly if I take out stylus it will unlock.
lorettaboy said:
I was using touch lock pro on the touch pro.
Click to expand...
Click to collapse
Googled it, light sensor lock sounded interesting, tested it. Never got the light sensor unlock to work. Had to keep tapping the lock button for a varying number of times to unlock. But worse: got catch-22-ed twice within ten minutes.
The first time I got caught with the screen on, the 'turn off' dialog active, and Touch lock Pro active but not clickable because of the turn off dialog. No way to unlock the device and the power button was hijacked by Touch Lock Pro. Removed back cover, took out battery and restarted.
The second time the device locked with the screen off, and the power button couldn't turn the screen on again. No way to find out what happened this time. Removed back cover, took out battery and restarted.
This tool is possibly the least compatible tool with the TD2 you will ever find
Hello All... a lurker, finally a poster
Loaded windows 7... thanks guys, much faster.... loaded as per instructions all looks sweet...
however I seem to have refresh problems on the desktop in w7... screen goes black when sleeping and when it wakes up it does not refresh, have to write click and refresh desktop, taskbar also has the same problem...
anybody else got this problem and anybody with a solution?
TIA
I've got this problem too, but no solution. Seems to really only occur in the 1024x600 mode though.
I've got the same issue, doesn't bother me much though.. it is kinda annoying when you have to tap certain parts of the screen just to get it to show up.
It's a general problem with Win 7 on screen resolutions greater that 1024. You may fix it by disabling screen shuting down / by enabling screensaver!
sort of fixed it.....
turned off the power saving function that turns the screen off and turned the screen save on to display a blank screen.
so semi-fixed....
simple workaround
just double click on the W7 "show desktop" button (right-down corner of your taskbar)
this button is allways on the same place, so it also works "blind" with a black screen (and will refresh the full screen also from powersaving)