Upgraded to Dutty's WM6.1 ROM, (great ROM btw)
but if the phone is working under 3G mode, when you take two calls and trying to do "Conference", both calls will be disconnected. If the phone is forced in EDGE mode, hitting "Conference" will bring 2 calls together.
Can at&t Tilt try this and verify? Or can somebody post a solution to this?
Mine works fine in 3G mode. Just used it yesterday in Las Vegas & Los Angeles.
are you kidding me....
which ROM & radio are u using sir?
Dutty 6.1 CE OS 5.2.19199 Build 19199
1.64.06.04
Upgrade WM6.0 to WM 6.1 only
Although I have had great sucess with the many Chef's ROM's on my Hermes and Kaiser I've chose to stick with the AT&T OEM rom for now.
Can I upgrade WM6.0 to WM6.1 only or is flashing with a rom the only way?
Ciao
I realize this was a while ago, but yes you could have downloaded the 6.1 upgrade and installed it on your phone, replacing the 6.0.
For those trying to 3-way call, call the first person, after they respond dial the second person, they will respond and the first one will be on hold. Hit the right softkey and scroll to conference. Hit conference and you are on your way! Hope this helps.
I am running AT&T WM6.1, but not much longer thanks to xda!
Related
I have a MDA Vario III that is unlocked and has a orange sim in it.
I previously used the orange sim in a SE P1i and the video calling worked perfectly.
Im running Alex's v5 HTC Clean Rom and have tried both 1.27.12.17 and 1.27.12.32 radio versions.
I go to the phone application, then type in a contact, then press and hold on the contact until the sub menu appears and then select video call mobile. This just goes on to make a normal voice call.
Any Ideas?
Cheers.
hi all
seem to have a problem with my vario 3... i cant recieve incoming calls unless ive made an outgoing call... and i always have to make an outgoing call twice to get it to connect...
been having this prob since thursday, so was trying various radios and even some new roms... but i cant resolve this issue
any suggestions...
for now I am on DCSv1.7 and the reccomended UK radio... the prob started on the Vista rom which was flawless until this happened... and i have tried every 6.1 radio out there...
cant help but think the vario has developed a fault
cheers
no-one got any suggestions?
i've just reloaded the stock tmobile rom and same problem. when i first try to call out, the call drops, but the 2nd time it works...
when i try to call my phone i get a "phone not available" message, then if i try again it works...
i shudder to think of the missed calls i'm getting and not knowing about...
Whats your radio, what version of WM do you have and its probably your area.
at the moment, and i've tried nearly all 6.0 and 6.1 roms, but Sleuth1.2 and 1.27.12.32, but again have tried many (obviously 6.0 with 6.0 etc )
its not my area, as never had this happen before in this area... i have full signal...
spoke to tmob, they said its a known fault and to set the band to GSM, which, it appears has fixed this issue... but i no longer seem to get 3G or HSPDA etc
what i dont get is why has this happend after 6 months of flawless stock rom usage, and 3 months of cooked rom usage? tis all a bit random...
but i guess its fixed for now, just means ive lost high speed data
Hey everyone, really hope that someone can help me with this as I'm being driven mad by this problem.
I've had my Kaiser (an O2 branded XDA Stellar) for about 5 months now, originally with Windows Mobile 6, but then upgrading to 6.1 via O2's official ROM provided at my-xda.com.
Since I upgraded to 6.1, I have been experiencing a problem where not all of my texts have been received by my friends, despite the phone clearly stating that they have been sent.
Earlier this month, my girlfriend contacted O2 on my behalf, where she was told that my phone had sent a number of my messages as pages, rather than sms (as in a message that would be displayed on an old style beeper).
When I then contacted O2, they simply asked me to take out the phone battery while it was still on, causing a forced disconnect from the network. While this did seem to solve the problem at first, within 3 days I started having the same problem.
The people at O2 do not seem to have any idea on how to fix this, so I was hoping that someone on here might have some idea on how to help?
Model: O2 XDA Stellar (HTC Kaiser)
WM Version: 6.1 Pro (CE OS 5.2.19212 - Build 19212.1.0.3)
Rom Version: 3.29.206.0 WWE
Radio Version: 1.65.16.25
Protocol Version: 25.83.40.02H
P.S. Not sure if this is relevant, but I used a registry fix recently to disable the threaded sms feature, though this was after the issue first started.
Every TF3D 2.1/2.5 ROM with wm 6.5 that I run on my phone has this problem. Whenever I receive an incoming call, I press the talk key and the phone either doesn't connect with the call until like 10 seconds later OR sits and the incoming call screen and just drops the call. This is VERY annoying. Everytime somebody calls me I have to call them back and explain why I was unable to answer the call. I don't know if this problem is related to TF3d 2 or WM 6.5, all I know is that I've flashed multiple ROMs from different cooks (Itje, NRGZ28, agent_47, rotastrain). All of these cooks make EXCELLENT roms, but I have the same problem in all of them. So, does anybody know of another good dialer that I could try? I want something that is both attractive (like TF3d 2.5 dialer) and functional.
Try PhoneEx from iconsoft.com. Though I don't know how it will go with TF3D.
Bennieficial said:
Every TF3D 2.1/2.5 ROM with wm 6.5 that I run on my phone has this problem. Whenever I receive an incoming call, I press the talk key and the phone either doesn't connect with the call until like 10 seconds later OR sits and the incoming call screen and just drops the call. This is VERY annoying. Everytime somebody calls me I have to call them back and explain why I was unable to answer the call. I don't know if this problem is related to TF3d 2 or WM 6.5, all I know is that I've flashed multiple ROMs from different cooks (Itje, NRGZ28, agent_47, rotastrain). All of these cooks make EXCELLENT roms, but I have the same problem in all of them. So, does anybody know of another good dialer that I could try? I want something that is both attractive (like TF3d 2.5 dialer) and functional.
Click to expand...
Click to collapse
I use Inesoft Phone (http://www.inesoft.com/eng/index.php?in=phone.html) and have found it much better but still not perfect!
I'm currently using W6.5 titanium (Genesis rom - which is superb!) and it uses a caller display screen that I've not seen so far - I think it's the new 6.5 caller display that works very quickly and as expected...
Hi guys, thanks for having this thread, i really hope you guys can help me. I've had my diamond for 1 and a half years now and i recently activated the edge data connectiond from my service provider. Since them, almost every time i take a call or receive a text, the phone does a soft reset. I've tried everything i know and but no improvement. Some extra info: the diamond is the gsm US version, my service provider is Digicel(that's what we use here in the Caribbean) and their technicians don't know what's wrong either. Im also using a donsalari Rom with WM 6.5, TF3D 2.1. I've been using donsalari romms for a while and they work excellently and no one else on his thread reports this issue. Looking forward to your reply.