HI,
I have a fatal error on my HTC S710. After switching the phone on I get 3 horizontal bars on top a red bar with VOX ONBL 1.34.000 in the middle a green bar with SPL 1.34.000 and the a blue bar with CPLD -04
I have tried to upgrade to 1.34 but no success
After about 30 hard reboots I can get the phone working for 5min and then it hangs again and the 3 bars pop up.
So I think I need to completely reinstall WM 6 but can't find the file on this site?
Thx,
Try the right forum mate, you have posted in the Wings forum not the vox forum.
Roland
Could it be an issue with the Vox update being made for WM5 which the phone came with?
Related
Hey Guys.....i was referred to this website by the HTC customer care......
I am in serious trouble.....
I bought this new tilt which had the At&t rom and worked really great.....Dont know what got into me.....I read a lot about custom roms and I installed Duttys official WM 6.1 after installing the Flash Hard SPL......It was perfect except the phone call function wasnt working any more.....I mean when I called my home number....i got the ring, but when the phone is picked up i couldnt hear anything nor did anybody on the other side.....I tried this many times on different numbers....
Realizing the mistake I downloaded the latest tilt rom from the HTC website and installed it......The phone restarted fine....screen alignment.....showed the today screen and then it goes through all the AT&T customization......The phone restarts after the customization.....shows the AT&T initial screen and then the 3G animation......after that it goes to a very dim dark blue blank screen.......the phone is on...the key lights turns on when clicked.....but the today screen doesnt boot up......This is were I am rite now.....stuck with this blank dark blue screen......The phone goes to standby more after about 1 min I guess.....and when the phone is waken up from the standby mode I see a screen with a mixed color screen.....I am not talking about the red blue green boot loader screen....this is colors all over the screen.....each pixel is different color.
I dont know what to do.....
Please if anyone can give me some advice and help me out......
Thank you so much in advance.....
did u hard reset after flashing?
blessanjoseph said:
Hey Guys.....i was referred to this website by the HTC customer care......
I am in serious trouble.....
I bought this new tilt which had the At&t rom and worked really great.....Dont know what got into me.....I read a lot about custom roms and I installed Duttys official WM 6.1 after installing the Flash Hard SPL......It was perfect except the phone call function wasnt working any more.....I mean when I called my home number....i got the ring, but when the phone is picked up i couldnt hear anything nor did anybody on the other side.....I tried this many times on different numbers....
Realizing the mistake I downloaded the latest tilt rom from the HTC website and installed it......The phone restarted fine....screen alignment.....showed the today screen and then it goes through all the AT&T customization......The phone restarts after the customization.....shows the AT&T initial screen and then the 3G animation......after that it goes to a very dim dark blue blank screen.......the phone is on...the key lights turns on when clicked.....but the today screen doesnt boot up......This is were I am rite now.....stuck with this blank dark blue screen......The phone goes to standby more after about 1 min I guess.....and when the phone is waken up from the standby mode I see a screen with a mixed color screen.....I am not talking about the red blue green boot loader screen....this is colors all over the screen.....each pixel is different color.
I dont know what to do.....
Please if anyone can give me some advice and help me out......
Thank you so much in advance.....
Click to expand...
Click to collapse
ummm what happens when you do a hard reset?
To perform a hard reset place two fingers, one of the left softkey and one on the right, and insert the stylus into the reset hole to the right of the usb port.
let the phone reboot and tell me what happens.
blessanjoseph said:
Hey Guys.....i was referred to this website by the HTC customer care......
Click to expand...
Click to collapse
HaHa thats too funny they referred you to xda maybe they can keep up with all the complaints because I cannot.
anyhow tell us what happens after hard reset
lol........i find that amusing too,
your issue sounds like a radio problem.......
when you boot up your device, tell us what number is next to the red R
XtreMe_G said:
lol........i find that amusing too,
your issue sounds like a radio problem.......
when you boot up your device, tell us what number is next to the red R
Click to expand...
Click to collapse
shouldn't be a radio issue if he downloaded the latest tilt rom from htc website because a radio is attached with that rom.
Sorry....forgot to mention that.....I did do hard reset by holding down the soft keys and by inserting the stylus......It goes through the entire cycle of reloading....today screen....customization and finally I end up with the blank screen I talked about before which comes right after the windows screen at the startup.....
blessanjoseph said:
Sorry....forgot to mention that.....I did do hard reset by holding down the soft keys and by inserting the stylus......It goes through the entire cycle of reloading....today screen....customization and finally I end up with the blank screen I talked about before which comes right after the windows screen at the startup.....
Click to expand...
Click to collapse
after you inserted the stylus while holding down the two softkeys "calender" "contacts", did the device inform you to hit the "send" key on two occasions?
yea, i noticed that......but what he described is what happens when you have an incompatible radio.....
the only thing i can think of is......the radio from hell.....
XtreMe_G said:
yea, i noticed that......but what he described is what happens when you have an incompatible radio.....
the only thing i can think of is......the radio from hell.....
Click to expand...
Click to collapse
good call but did dutty ever put it with one of his roms? He wouldn't be that mean
maybe he can tell us what it says when it boots up...the R G D numbers..since he probably cant go to start and device info for us
R 1.65.17.10
G 25.83.40.02H
D 1.62.00.00
This is what I see at the startup....at the bottom of the screen with a At&t background.....
lol...... good call mate.
blessanjoseph said:
R 1.65.17.10
G 25.83.40.02H
D 1.62.00.00
This is what I see at the startup....at the bottom of the screen with a At&t background.....
Click to expand...
Click to collapse
Here read this thread. Hopefully you can figure it out. Like XtreMe_G stated you got the radio from hell. You must of installed it before dutty's rom.
http://forum.xda-developers.com/showthread.php?t=393337
woot!!! i pwns
XtreMe_G said:
woot!!! i pwns
Click to expand...
Click to collapse
hell ya you do. I should go rick roll myself now.
Yes I did press the send key twice....Once to confirm the reset and second one to restart the device.....I just now did it once again to be sure and still in the same page.
Ends up with a blank screen....goes to stand by....when waken up gives me a mixed color screen.....looks like somebody used different color spray paint on my lcd screen....
blessanjoseph said:
Yes I did press the send key twice....Once to confirm the reset and second one to restart the device.....I just now did it once again to be sure and still in the same page.
Ends up with a blank screen....goes to stand by....when waken up gives me a mixed color screen.....looks like somebody used different color spray paint on my lcd screen....
Click to expand...
Click to collapse
well you installed the radio from hell before you installed dutty's rom thats why you couldn't hear anything.
Now you need to remove it or find a compatible rom.
So read this thread
http://forum.xda-developers.com/showthread.php?t=393337
good luck.
THanku.....THanku.....THanku.....THanku.....
Ohhhh.....thank you all.....for your time effort and all the advice and information.....
The last thing the HTC customer care representative told me was that ill have to send in the device to fix it up.....
I followed exactly like it said in the link and Hurray.......my phone is alive......
Thanku all once again.....
The best forum ever....
Guys did i have that phone call problem because of the hard SPL or Duttys Official WM6.1. If it was because i installed the hardspl first, can I go back to Duttys Official WM6.1 without any future problems by just flashing the ROM with duttys WM straight skipping the hardspl step..
I really liked that version....but wud like to make phone calls obviously....I know the mistake is from my part....screwed up somewere....cause I see so many ppl using custom roms without any problems...
Please tell me what could be the best solution....
Thanks a lot...
For more than a month I am experiencing a strange issue: my Kaiser cannot re-align properly: I tried several times to go to settings > system > screen and re-do the alignment...after completion it seems that the whole left scrolling bar arrows react only if I click at the very left of it.
On the keyboard, if I want to type "t" I need to click between "t" and "y"
If I click on the centre of "t" the display will show "r"
How to solve this issue?
I have downloaded and installed at least 4 different ROMs, including the lastest from Dutty: no improvement
Thanks and waiting
Saulo866
more details
This two are the ROMs I have used recently:
WM6.1
Touch v6.1 WWE
Radio 1.64.08.21
Protocol 25.74.40.02W
and
Dutty's WM6.1 WWE
Radio 1.65.16.25
Protocol 25.83.40.02W
Thanks
Saulo
I forgot to say that I have two additional Kaiser: one under the brand HTC (Classic black and brown color) and one named MDA TMobile (grey and with a different exterior mask)
These 2 units work perfectly: alignment is perfect....under any ROM...
Thanks
Saulo
I had similar problems with my Hermes, I would have to realign the screen several times a day, it would each time be ok but only for a few minutes/hours. It was actually simply dirt trapped between the screen and faceplate on the edges. The dirt was applying pressure on the digitizer and would constantly move and change the location/force it applied and thus calibration was always thrown off. I disassembled the device, cleaned around the screen, reassembled and never had a problem again.
On the Kaiser it's fortunately not as easy for dirt to get in as on the Hermes as there isn't such a huge gap, but it could still be related.
Anyone able to assist.
After my compact froze I did a soft reset only to see it hang on the T-Mobile splash screen (white background, pink dots). The ROM details do not even appear in the bottom right hand corner.
I have upgraded my ROM with Hard-SPL, a Radio ROM and Dutty's 1.8 ROM but that was weeks ago.
Any assistance?
AS an update, not even a Hard-Reset sorts it out.
Cannot see how the new ROM would be causing the problem as it has worked for a few weeks.
Luckily followed all the instructions and have 1.40 Olinex Hard-SPL on the phone. Just need to wait for home so I can plug it into my laptop. What I do from that point on will be the subject of a further search of this board later.
i had 2 crashes with my diamnond in 2 weeks now. after i took out the battery because the device was shutdown an power on was not possible, i had at bootup a strange screen!! there is a kind of a white router(looks like "netgear" or "trust") put vertical in a cradle. the backscreen was a bright blue colour. on the top of the screen in red letters was written : nice to see you . what the hank is this? after 5 seconds the screen disappeard and the diamond booted normal.
do i have to worry? the device is hard spl, using the .05 radio and TOR V5 ger
any ideas?
apoo
nice to see you......with a red heart???
this was a old splash screen i think it was the diamond project used on there early diamond roms
hope this helps
if you flash one of the new roms it "should" get rid of it
yes, red hearts nice to see you is white ..
i flashed just alphazero´s TOR v2 and v5 after the original o2 rom...
strange stuff anyway! never seen this before. it comes just when i take the battery out.
thanks a lot
i started having this problem a month ago. after boot the PPC writes something in red and after a few seconds gets black
i recorded it so it would be clearer
http://il.youtube.com/watch?v=NAHqAZS2nZ4
i tried installing a few roms and even the original one from htc website
i would appreciate any help you can give me
Very strange. What SPL version doyou have? Have you used cooked roms? Anything else happend to the phone?
HTC trinity original ROM
Here is the original HTC Trinity ROM:
http://rapidshare.com/files/202845245/Trinity_HTC_WWE_1.15.405.5_6275_1.20.00.11_12201_Ship.zip
1. Press on/off button + camera button + reset (using the stylus)
2. You should now be in tricolor screen.
3. Connect the usb cable.
4. Make sure you have activesync runing.
5. Install the rom provided in the link.
In the link you will find rom+radio. (Radio version 1.20)
Here is a newer radio version 1.56:
Hey! My trinity have the same problem!!!
I habe all test: Without sim, without SD, with SD, with SIM (with SIM screen is grey)
What have you done?
Original ROM - same problem
Mine was doing this earlier
seemed that their was dirt stuck in the reset button hole causing it to stick in slightly
I got this problem too. My trinity would turn on and start to fade away. But mine was a liltle more artistic. Many times i saw a kinda round spot in the middle of the screen that become black, then half of the screen would black out and then the rest of the screen. Sometimes i even got colors.
I noticed if a had a fully charged battery the phone would work perfectly.
But most of the time it turn on, but the screen stayed black with the retro light on.
I was told to try the unbrick exploit.
me too !!! i have the same problem with my htc 3600 ? can someone help us to fix our htc's 3600 ?thanks in advance....
have you fix it ?
hi all
I have a small problem with my htc p3600. It's not starting. It's loading only the bios but it's freezing with the screen picture and is not loading the WM 5.0 I try to change the WM5.0 with a new one but I don't have a active sync. connection.Please help
has anyone found a solution to this problem ?
anyone have a solution?
Finally, what you should do?
Since the Trinity / P3600 is getting old now, I believe more and more people are going to face this strange problem sooner or later.
So I thought I should save your time and tell you what you should do when your trinity starts behaving like what was described at the beginning of this thread.
YOU SHOULD DO NOTHING !!
THERE IS NO QUICK FIX
THERE IS NO WORKAROUND
THERE IS NO CHEAP SOLUTION
I have searched and tried everything mentioned in this forum that might slightly be related to the problem and all solutions failed.
So after days and days of experimenting, I gave up and sent my device to HTC dealer who called me few days later to tell me that the mother board needs to be replaced.
The dealer told me the cost will be around $213, but they said they are going to sent it back as it is, because they don't have that board model anymore!!.
Even if they had, for an old device like this , I don't think it worth that mush money to fix.
**************************************************************************
*SO BASICALLY , DON'T WASTE YOUR TIME TRYING TO FIX IT AND BUY YOURSELF A NEW ONE. *
**************************************************************************
.
.
.
.
Hello,
I resolve the problem with this : Simultnous press Power and Camera buttons and softreset, you'll got bootloader, three colors mode. Perhaps a little error message like this WLAN error but if you plug usb, it's ok.
Hope this good for you (excuse my poor english)
I've had this same problem for about a year now and keep coming back to it.
Any forward momentum on solving the problem would be appreciated as I quite like this phone.
1. The phone will boot FINE without a SIM
2. It hangs like in the video (or other strange screens) as soon as I insert a SIM card (partially or fully)
3. I've tried 3 different SIM cards
4. I have no SD cards
5. I have installed 3.20.Olipro
6. An official ROM is re-installed
I must admit the phone has had a hard life (or is it just the cheap plastic coatings HTC use)
No sooner did I post this did I find a solution.
For anyone that is interested...I have managed to re-install the original HTC ROM but HAVE NOT managed to install a workable 6.5 ROM yet.
So, the answer I found was:
1. Put P3600i into bootloader mode (push camera+power+reset buttons for 2 secs and get triple colour screen)
2. Re-flash HardSPL 1.1 from my PC
3. Re-flash original HTC ROM (WWE_3.00.707.18_6275_1.46.30.11_108) by agian putting P3600i into bootloader mode first
I since tried several different radio stacks but haven't noticed any difference in reception so have left the original stack on (1.46.30.11) as it gives the best phone call quality
I love the UI of the latest WM6.5 but if the P3600i doesn't run them properly I'll just have to do without.
Good luck with your own unbricking.
it was working fine for me when i put a little piece of rubber between the processor and the metallic cover of it but after 3 months i have the same problem and the paper dont work anymore.... now when i press the power button the screen is black, only the backlight is working anyone have any ideas what to do?
OMG WTF, as soon as I saw this thread I switched my HTC P3600 on and it started doing it I reckon this is cursed, I will upload a video onto Youtube later and show you that is what happened.
I had this problem myself, didnt know what i was doing wrong, altho my tri color screen did this, not the boot one.
I removed memorycard and voila, everything went smoothly.
edited
sorry 4 my mistake