Related
Does anyone know of a text to speech software for Windows Mobile 5/6? I'm looking for something that will read e-mail out loud.
Voice Command 1.6 will read email headers.
Thanks. I have VC1.6. I'm looking for something that will read the e-mail body to me while I'm driving.
As a follow up to this, does anyone know of an application to read out text messages whilst driving along? Its not very safe when the popup comes on screen covering up Tomtom.
ltxda said:
Thanks. I have VC1.6. I'm looking for something that will read the e-mail body to me while I'm driving.
Click to expand...
Click to collapse
Try Fonix Voice Central 3.1. It reads out the body of the email messages.
http://www.fonixspeech.com/pages/voicecentral.php
Gboye
hi guys for those who don't know voice command 1.6 read text body message
go to settings then email then option then uncheck high importance only
and voila it will read each sms when they come !
;-)
ethan.
ltxda said:
Thanks. I have VC1.6. I'm looking for something that will read the e-mail body to me while I'm driving.
Click to expand...
Click to collapse
and what about this:
text to speech for pocket pc pro
http://www.pocketgear.com/software_detail.asp?id=24042
tested it and the outcome is a clear english sound.
you can also download a trial
Palmchen said:
and what about this:
text to speech for pocket pc pro
http://www.pocketgear.com/software_detail.asp?id=24042
tested it and the outcome is a clear english sound.
you can also download a trial
Click to expand...
Click to collapse
I saw this one but didn't know if it would read the e-mail from within Outlook or if I had to copy/paste the words into a document. If you still have it installed, could you let me know if you can tell it to read an e-mail from within Outlook? At the very least, open a message when it arrives then this program reads the message after you instruct it to do so?
Gboye said:
Try Fonix Voice Central 3.1. It reads out the body of the email messages.
http://www.fonixspeech.com/pages/voicecentral.php
Gboye
Click to expand...
Click to collapse
Thanks, this says it'll read the e-mail as it arrives and even allow me to reply or delete, etc. If you use it, do you know if it'll read over BlueTooth headset? If it will then It's most likely the perfect program and must have for the Athena.
ltxda said:
Thanks, this says it'll read the e-mail as it arrives and even allow me to reply or delete, etc. If you use it, do you know if it'll read over BlueTooth headset? If it will then It's most likely the perfect program and must have for the Athena.
Click to expand...
Click to collapse
I used an earlier version on the Blue Angel and it did what it said it would do. Not used it on the Ameo though.. But you can downlad a free trial and see if it works over BT.
Gboye said:
I used an earlier version on the Blue Angel and it did what it said it would do. Not used it on the Ameo though.. But you can downlad a free trial and see if it works over BT.
Click to expand...
Click to collapse
Thanks. I've downloaded it but haven't had a chance to test it out yet.
I had been looking for something like this for some time. Well, thanks to this thread I have downloaded and tried it. Conclusion: very useful, though could be improved.
1. Voice quality is not very good.
2. Reads the emails and very accurate.
3. Functionally quite rich - though I have only tried reading emails as this is what I was after.
However, I havnt figured out how to read emails as and when they arrive. I seems tha I have to start the application to read the emails. If anyone has any ideas, please share them. Thanks
Digital.Diablo said:
As a follow up to this, does anyone know of an application to read out text messages whilst driving along? Its not very safe when the popup comes on screen covering up Tomtom.
Click to expand...
Click to collapse
Hey I know this is several years later, but like me I bet your STILL using windows mobile ... so if so.... you need to look at this thread, post 8 in particular. http://forum.xda-developers.com/showthread.php?t=407630
the xda user posted a link to software (freeware) that will intercept incomming text messages and read them... EXACTLY what you were looking for. Now... if we could only find software that will take dictations and text them up for us freeing us from typing all the time.
Good luck peeps.
Hey Everyone,
I am looking to send a single sms to specific multiple contacts. I understand that the sms feature in WM6 allows you to autocomplete a contact by typing theyre name as you go, I am looking for however a CAB file or something that will allow me to do something like tick the people i want to send to?
I hope they're is something like this out for WM6, otherwise its a long time sending about 200 mobiles a new number ha ha.
I'm not a often poster, but long time viewer, and i know you all know your stuff and i'm thankful for anything you can tell me!
Sean Saunders
In Duttys 6.1 rom there is something called groupsms, I dont know how/if it works...but I know its there , may be what you are looking for
SeanSaunders said:
Hey Everyone,
I am looking to send a single sms to specific multiple contacts. I understand that the sms feature in WM6 allows you to autocomplete a contact by typing theyre name as you go, I am looking for however a CAB file or something that will allow me to do something like tick the people i want to send to?
I hope they're is something like this out for WM6, otherwise its a long time sending about 200 mobiles a new number ha ha.
I'm not a often poster, but long time viewer, and i know you all know your stuff and i'm thankful for anything you can tell me!
Sean Saunders
Click to expand...
Click to collapse
Don't know if you'd only be satisfied with ticking multiple names, but the auto-complete thing does allow you to type in more than one name. I assume you realized that? Alternatively you can just continually click on "add recipient" and select them all one-by-one, though that's a pain in the ass. I've found the autocomplete for multiple recipients to be pretty fast. Do you not find that to be the case?
I was chatting to a few people on palringo's MoDaCo group and one user suggested Jeyo Mobile Companion 2.0 Demo. It does exactly what i wanted to do on the phone but on windows XP!
I only really needed it as a one off but i would recommend it as a solutions especially if your going to use it reguarly
Thanks for your comments and suggestions though, your all good people!
Sean Saunders
you can try this software SMS Assistant from QimSoft
http://www.qimsoft.com/
After install, it will add one Menu item "Add Recipients" at the bottom of Menu
Click it then it allow you to multi select contact
yeah I use group sms as well you can find it in the development thread. didn't realize it was included in the 6.1 rom as well.
SeanSaunders said:
I was chatting to a few people on palringo's MoDaCo group and one user suggested Jeyo Mobile Companion 2.0 Demo. It does exactly what i wanted to do on the phone but on windows XP!
I only really needed it as a one off but i would recommend it as a solutions especially if your going to use it reguarly
Thanks for your comments and suggestions though, your all good people!
Sean Saunders
Click to expand...
Click to collapse
Don't worry mate there is an ultimate solution for GRoup SMS... Although i already answer this query in this forum before but anyway...
You definitely need a RJV SMS SCHEDULER OR SHUBAROO'S GROUP SMS 1.4.4 ...
just goto www.freewarepocketpc.net and search it there
cheers...
Hello,
Before my Diamond I had a Motorola v3 Razr. The Razr did give a sms notification every minute or so. When I received a sms, it gives notifications until i read the SMS. The Diamond only flashes the led light. Is it possible to let the Diamond vibrate every 3 minutes or so when there is an unread SMS?
Thnx in advance
Anybody an idear?
settings/personal/sound and notifications/sound (events and notifications on)
settings/personal/sound and notifications/notifications (go look for mms/sms, check "play sound", check "display message on screen", check "vibrate" or choose any combination).
now say thank you and go ...RTFM! (Read The F... Manual) before you post.
i also recommend a search on the forum. don't be lazy...
KukurikU said:
settings/personal/sound and notifications/sound (events and notifications on)
settings/personal/sound and notifications/notifications (go look for mms/sms, check "play sound", check "display message on screen", check "vibrate" or choose any combination).
now say thank you and go ...RTFM! (Read The F... Manual) before you post.
i also recommend a search on the forum. don't be lazy...
Click to expand...
Click to collapse
A bit rude and not even an answer for his question......
He is looking for REPEATED notifications......something SPBPhoneSuite can do for example. There may be other programs out there for the same purpose, don´t know of any freeware, though....
michi123 said:
A bit rude and not even an answer for his question......
He is looking for REPEATED notifications......something SPBPhoneSuite can do for example. There may be other programs out there for the same purpose, don´t know of any freeware, though....
Click to expand...
Click to collapse
1. sorry you think so. don't get it ...what's rude? my 2 last recommendations?
2. the notification stays on the screen until you dismiss it, so why repeat? as a matter of fact i am not so sure it is not repeating...
i do know for sure that reminders do repeat so i can guess that all notifications are repeating.
i think he is looking for repeated sound notifications.
I'm very sorry when i offended some of you with my question, but the last post sums it all up. I'm looking for a repeating sound/vibration notification. I will try SPBPhoneSuite, but i'm not font on installing an whole " heavy" program for such small things. So when there is an alternative...please let me know
http://forum.xda-developers.com/member.php?u=368137Kukuriku - arrogance and rudeness are sometimes difficult to distinguish, but both are bad.
I did a freeware solution - DmsisAlert
Hi, i did a simple application that works on Windows Mobile 5 or superior (.Net CF 3.5 is a requirement).
To download go to DmsisAlert page and click on DmsisAlert link, unzip, tranfer the .cab file and install. If you like (or not), i will appreciate some feedback (you can do that on download page).
With Diamond is a good idea not to use the minimize functionality because after that there is no way to get interface back (allthough it still running on the background). I will work on a solution for that (i'm busy enjoying my new phone ).
hope that can help, helps me a lot
Dan
Hi dmoreira,
I like your thoughts about the program. I tryed it, but it gave an error. Nullexeception or something...
Dmsis Alert - SMS Notification periodic
Rik_X said:
Hi dmoreira,
I like your thoughts about the program. I tryed it, but it gave an error. Nullexeception or something...
Click to expand...
Click to collapse
Thanks for trying... the program requirements are: Windows Mobile 5 or superior and .Net CF 3.5. I tested on WM5 and WM6.1 (Kaiser and Diamond) and run ok for me. Maybe you device are missing some requirement?!
Dan
Rik_X said:
I'm very sorry when i offended some of you with my question, but the last post sums it all up. I'm looking for a repeating sound/vibration notification. I will try SPBPhoneSuite, but i'm not font on installing an whole " heavy" program for such small things. So when there is an alternative...please let me know
Click to expand...
Click to collapse
Dude, try Best Reminder:
http://best-reminder.en.softonic.com/pocketpc
It ain't freeware, but its light and does the job perfectly every time.
I did use SPB phonesuite before, and I found it heavy with other features I don't need. Also, the damn thing didn't work at times!
try this http://forum.xda-developers.com/showthread.php?t=405071&highlight=sms+reminder+vibrate
and free, always check the 'Development and Hacking' forum
@dmoreira: What requirement can that be? I have an stock diamond, with latest romupdate en .Net CF 3.5?
@MasK: That's i very nice program. I tested it, and it does the job except for the vibrating!
@badaas: That's another very nice program. I also tested this one and it works perfect. Except that it turns on the screen with every reminder... And you have to reboot the device to configurate it again...
Rik_X said:
@dmoreira: What requirement can that be? I have an stock diamond, with latest romupdate en .Net CF 3.5?
Click to expand...
Click to collapse
Sorry, a made some fix in some peace of code that depending of device could rise exception and i think the problem was solved.
I'm attaching the application here to let things easier.
Dan
Rik_X said:
@MasK: That's i very nice program. I tested it, and it does the job except for the vibrating!
Click to expand...
Click to collapse
Yea.. I know.. but it's ok for me. If yr phone is in silent mode, it vibrates instead.
dmoreira said:
Sorry, a made some fix in some peace of code that depending of device could rise exception and i think the problem was solved.
Dan
Click to expand...
Click to collapse
Ok it works just fine! Very nice program! But if i can say 3 things about it:
- The minimize function still doesn't work to well
- You cannot delete the program via the "delete programs" way
- I really like the phone to not only notify me via sound, but also via vibration? Is this possible?
thnx!
Rik_X said:
Ok it works just fine! Very nice program! But if i can say 3 things about it:
- The minimize function still doesn't work to well
- You cannot delete the program via the "delete programs" way
- I really like the phone to not only notify me via sound, but also via vibration? Is this possible?
thnx!
Click to expand...
Click to collapse
before anything thanks for trying my work... about your comments:
"- The minimize function still doesn't work to well" : You're correct, but in others devices without TouchFlo3D the minimize works a lot better. With TouchFlo3D this feature practically doen'st work (i believe that's the same for other applications that have a minimize function that puts an Icon in the Today Screen).
"- You cannot delete the program via the "delete programs" way": A fix for that will be available very soon
"- I really like the phone to not only notify me via sound, but also via vibration? Is this possible?": It's possible but i dont like the result of doing this with the easiest way, so this feature will be available not so soon (but i will adivise here when so).
I will make some changes and post here a new version with some improvements.
Thanks again for trying.
dmoreira said:
"- The minimize function still doesn't work to well" : You're correct, but in others devices without TouchFlo3D the minimize works a lot better. With TouchFlo3D this feature practically doen'st work (i believe that's the same for other applications that have a minimize function that puts an Icon in the Today Screen).
"- You cannot delete the program via the "delete programs" way": A fix for that will be available very soon
"- I really like the phone to not only notify me via sound, but also via vibration? Is this possible?": It's possible but i dont like the result of doing this with the easiest way, so this feature will be available not so soon (but i will adivise here when so).
Click to expand...
Click to collapse
I like testing this program, because it meets almost my exact criteria for such a program! Nice work!
- That minimize function is a pity, but understandable with the TF3D thing!
- Ok if you can fix that 'delete programs' issue, that would be very nice. I don't have a clue how i can properly delete it now!
- I will wait on a fix for the vibrating! That would be very nice!
Keep up the good work!
Thnx!
Dmsis Alert uninstall issue resolved
Rik_X said:
I like testing this program, because it meets almost my exact criteria for such a program! Nice work!
- That minimize function is a pity, but understandable with the TF3D thing!
- Ok if you can fix that 'delete programs' issue, that would be very nice. I don't have a clue how i can properly delete it now!
- I will wait on a fix for the vibrating! That would be very nice!
Keep up the good work!
Thnx!
Click to expand...
Click to collapse
Hi Rik_X, after a lot of work (i posted the issue in different forums, but got no answer) trying finding a correct solution to uninstall and i ended downloading SkTools (i downloaded from here http://www.clickapps.com/download.htm?pvid=1324) and use a feature called Installed Programs and then Dmsis Alert was listed and i was able to uninstall it!! After that i install the version attached here and then the Dmsis Alert will appear again in the Windows Mobile Remove Program list. Sorry about the troubles that error could cause you.
Anyway i'm posting the last version the doesn't have this uninstall issue. I'm also working on the vibrate feature (still looking a direct interop way to do that).
You know the lady voice that announces when the battery is almost dead, when you get a text message and reads it to you and all the other stuff...is there any way to change that text to speech voice to a different female voice? I know there are several other voices that are available but not sure how it would be changed on wm 6.1
First off, what app is doing that for you?
huh???!!
angelo2k8 said:
You know the lady voice that announces when the battery is almost dead, when you get a text message and reads it to you and all the other stuff...is there any way to change that text to speech voice to a different female voice? I know there are several other voices that are available but not sure how it would be changed on wm 6.1
Click to expand...
Click to collapse
Are you sure your using a diamond for that? I have used a diamond for months now and have not discovered that feature!! please provide further details as to what device you have and which country bought in etc.
interesting....
I think I know what he's talking about, which is he has MS Voice Command installed.
As far as I know, it isn't possible to change the voices on MSVC but if anyone can prove me wrong please do, as I'd love a different set of voices as well
xavierdemon said:
First off, what app is doing that for you?
Click to expand...
Click to collapse
He's talking about Voice Commander. When you receive an email / sms you can run it and say 'Read SMS' or 'Read Email' and it will read any unread emails /sms
Very handy, esp. when driving
I would also love to know how to change the voice though
xavierdemon said:
First off, what app is doing that for you?
Click to expand...
Click to collapse
Voice Command located in settings menu.
RAF_SHC said:
Are you sure your using a diamond for that? I have used a diamond for months now and have not discovered that feature!! please provide further details as to what device you have and which country bought in etc.
interesting....
Click to expand...
Click to collapse
Come on now, of course I know what freakin' phone I'm using. That's like asking someone if they know what kind of car they drive and if they are sure about it.
Here's what you do to enable it:
Settings>Voice Command>
Check 'Enabled'
Check 'Messaging', 'Status' & 'Phone' boxes
The go to 'Notifications' and check 'Announce notifications through device speaker or wired headset only'
[/LIST]
Those directions above will read out loud the person calling you when you get a call, the person who sent you a SMS and what the SMS says, will read to you any email including the sender and subject line, but not the email and will also notify you when your battery is gonna die.
Trust me, it's a major attention-getter when your phone reads a text message to you when it comes in and people around you are like wtf was that. Plus it's great if you are lying in bed or something and your phone is across the room...you can hear what the message says and whether or not it's worth getting out of bed for. :-D
But anyway, if anyone knows how to change the voice please respond. Thanks!
Voice Command isn't installed on all Diamonds as standard and as I stated, there is no way to change the voices, I have searched for this myself before with no luck.
cool!
xavierdemon said:
Voice Command isn't installed on all Diamonds as standard and as I stated, there is no way to change the voices, I have searched for this myself before with no luck.
Click to expand...
Click to collapse
This sounds like an excellent app! I tried locating it on my UK O2 spec diamond and could not find so if anyone has got a cab file please post. I will search google now and i'm sure i'll find it and post if no-one beats me to it.
Man i'm learning new sh!t about my phone everyday. Cheers guys i know i have not answered your question but you have helped me finding something new
nice one!
pretty sure you cant change the voice but i know there's a registry tweak to slow the voice down witch makes it easier to understand. I've just remembered I'm sure there's the tweak in Advance config hope this helps
yeah i have this enabled on my phone and its the best when your laying in bed and wonder if its worth looking at. I do wish it was a more sexier voice like sigourney weaver from planet earth, and a little slower would be nice. IT came stock on my sprint diamond fyi, im surprised other versions dont have it
I have a sprint diamond and mines only talks when someone sends me a text message marked urgent and thats it. I have all the tabs checked on VC in the settings menu. am I missing somthing?
ajbrickyard said:
I have a sprint diamond and mines only talks when someone sends me a text message marked urgent and thats it. I have all the tabs checked on VC in the settings menu. am I missing somthing?
Click to expand...
Click to collapse
me too
and I can`t say anything to phone too!
I guess I'm missing it too because mine doesn't say anything.
ajbrickyard said:
I have a sprint diamond and mines only talks when someone sends me a text message marked urgent and thats it. I have all the tabs checked on VC in the settings menu. am I missing somthing?
Click to expand...
Click to collapse
You don't have it setup correctly, that's why.
Go into Voice Command and do this:
- Check all the boxes you want to use this service. (Phone, Messaging, Status, Etc.)
- Highlight 'Messaging' then click on 'Options' button then UNCHECK 'High Priority Messages Only' and CHECK 'Announce New Messages'. Do the same steps for others like 'Phone' and 'Status' to change it's options. Make sure you highlight it first.
berserker said:
I guess I'm missing it too because mine doesn't say anything.
Click to expand...
Click to collapse
Read my replies in this thread.
Don't have it neither on a 1.93 HTC ROM official
Seem to be cool to try... is it available ?
Ciao
Fred
Good afternoon!
I've tried to ask these question on other forums, but almost nobody gave me an answer. There were some about different software to use, but it didn't really help. So I would be very pleased if you, dear X1 gurus, answer these question. Please, if you know the answer - write it here for me and other people. Thank you very much in advance!
The priority is: I. How to solve the problem using native software or registry? II. If and only if the first is not possible, how to solve it using different software?
1. Where in file system the vocabulary of words which were inputted before is situated? It's a vocabulary with these tooltips-words while typing. Can I get it somewhere form my phone and backup or even edit?
2. How can I check my X1 uptime?
A: As yet I know only one way: use AEButton Plus. You can correct or supplement this opinion(and please do it) if you know more on that.
3. Someone called me from number +ХХХ, I want to call him back, BUT to add a zero between + and the first digit(+0XXX). How can I do it? I can't copy this number and there is no options like "change then dial". The one and only solution for it - is to choose "send SMS" and copy the number from the "From" field! But is it useful and normal for a device which costs about 500 euro?
A: As yet I know only one way: use Inesoft PhoneEx. You can correct or supplement this opinion(and please do it) if you know more on that.
4. Imagine: you have a contact Ivan in your contacts, which has 2 phone numbers: mobile and work. Two sms arrive to your phone: one is from his home number, another is from work. Sms inbox displays both of it as "Ivan". How do I know which sms is sent from what number?
A: As yet I know only one way: use Inesoft PhoneEx. You can correct or supplement this opinion(and please do it) if you know more on that.
5. How can I copy a number which was dialed earlier or number from contacts? I see only one way(but it's weird): chose "edit contact" and copy from the field. Is there another way?
A: As yet I know only one way: use Inesoft PhoneEx. You can correct or supplement this opinion(and please do it) if you know more on that.
6. While a phone conversation how can I easily save a number which my friend is saying to me? I tried to dial it while a call is active, it's ok, but once the call is dropped, my number disappears! Yes, I can create a note using a special touch-key, but it's not useful, because I should use my keypad and then should copy that number, but I need to dial it! How can it be solved?
7. Have anybody experienced a problem while taking a photo of many different objects? I had. It happened when I took a photo of a forest - there were a lot of trees alongside each other and after pressing shot button, "Saving..." was displayed on my screen for about 15 minutes! After it said that it failed to take a photo. What it can be?
8. Where can I find all my earlier connected WiFi points and passwords? I want to save it before upgrading my firmware. Can I backup it?
9. Can I turn of a feature of turning my screen light on when I plugging my X1 to PC? I don't want this light to be turning on when I do it! Is it possible?
10. While surfing internet via GPRS/EDGE or getting my email from server, my GSM part of device seems to be "unconsciousness": when somebody calls me, I'm "out of zone". How can I fix it? I want my GSM part to be number 1 by priority!
11. I can see anything when the sun is shining. I know everybody with X1 can't. But can I "ask" my backlight to help me? For example, set it to turn maximum power when on the light, or something? I'm asking because, as I've understood, my auto-backlight works vice versa: when it's bright - it turns off, when it's dark - it turns its max power. I want max power when it's very bright too!
A: People say that screen protector with anti-glare really helps.
12. When an SMS is coming, I get a popup notification at the bottom of the screen. I can either press "Reply" or "Options". If I press reply, the chat mode opens and I can reply, seeing all our conversation. BUT if I go to my address book and choose "New SMS" on a contact, different form will be opened, just like for e-mail composing. And here is a question: how can I make this "e-mail composing" style sms appearing after I press "Reply" when new sms arrived? I know how to turn the chat mode off, but I don't need it to be turned off completely, because it's useful while reading sms from one person. I just want reply to a person using simple form. Is it possible somehow? I think that if it's can be made by hands(New sms from contacts), then it could be implemented programmatically... maybe some values in registry?
A: As yet I know only one way: use Inesoft PhoneEx. You can correct or supplement this opinion(and please do it) if you know more on that.
13. At the screens you can see screenshots from my X1 with R2A0010 and 1.14 radio: 1 hour after powering on and 2 days after powering on. Why there is such a difference in memory consumption in some system processes? Is it an ordinary thing?
A: People say that it's normal. You can correct or supplement this opinion(and please do it) if you know more on that.
Thank you very much in advance again!
Great questions, especially #6. I can't answer any of them exept #5, so I'll have to watch this thread along with you!
#5, go to call log in the phone dialer and there is a menu option to save to contacts. If you want to save it to a pre-existing contact....you will have to add a question #14 to your list
PhoneX can do these two.
WhyBe said:
Great questions, especially #6. I can't answer any of them exept #5, so I'll have to watch this thread along with you!
Click to expand...
Click to collapse
Thank you. I'm sure there are a lot of people, who would like to know these answers too... I hope that there are people here on xda-developers forum, who knows needed answers...
WhyBe said:
#5, go to call log in the phone dialer and there is a menu option to save to contacts.
Click to expand...
Click to collapse
It's almost the same solution I offered for existing contact(edit contact and copy number from there). Maybe it's possible somehow to add in menu "Copy number"? (or I just have too much hope)
WhyBe said:
If you want to save it to a pre-existing contact....you will have to add a question #14 to your list
Click to expand...
Click to collapse
I don't know how about you, but when I choose "Save to contacts", it opens all contacts + "New contact" list...
VNMenIeu said:
PhoneX can do these two.
Click to expand...
Click to collapse
Thanks for your answer. Yes, it can, just as Inesoft Phone. I've installed both of it. And then removed both in the same day. IMHO, they add some good design, but hardly can pretend on a lot more useful then original dialer. (Just for future messages, to have this thread clean, I say to myself and others(for the off-chance): I would not want to discuss any soft here, so please, let it be only tries to answer to these questions... thank you in advance)
BRING ON THE QUESTIONS!!!!!!!!!
1 - I don't know.
2 - AEB Button Plus has such a feature.
3, 4, 5, 6, 12 - I use PhoneEx sorry.
7 - Never heard of it. Upgrade your device to R3A and try again.
8 - I believe there is a text file in the Windows folder. I am not 100% sure though.
9 - Yes. There is a reg tweak, but I can't find it. Someone else should have it.
10 - Never had that problem. Are you using a custom ROM?
11 - I can see the screen very good in the sun, because I use a screen protector with anti-glare. Buy one and be amazed.
13 - It is normal.
J-Pro said:
Thank you. I'm sure there are a lot of people, who would like to know these answers too... I hope that there are people here on xda-developers forum, who knows needed answers...
It's almost the same solution I offered for existing contact(edit contact and copy number from there). Maybe it's possible somehow to add in menu "Copy number"? (or I just have too much hope)
I don't know how about you, but when I choose "Save to contacts", it opens all contacts + "New contact" list...
Thanks for your answer. Yes, it can, just as Inesoft Phone. I've installed both of it. And then removed both in the same day. IMHO, they add some good design, but hardly can pretend on a lot more useful then original dialer. (Just for future messages, to have this thread clean, I say to myself and others(for the off-chance): I would not want to discuss any soft here, so please, let it be only tries to answer to these questions... thank you in advance)
Click to expand...
Click to collapse
PhoneEX is way more useful than org. dialer
orelsi said:
BRING ON THE QUESTIONS!!!!!!!!!
...
3, 4, 5, 6, 12 - I use PhoneEx sorry.
Click to expand...
Click to collapse
I've been using the PhoneEx trial for a few days and it doesn't do #5 and #6. If any workaround involves tons of keypresses and program changing (during the call) to accomplish, then it fails. I think the OP is looking for a quick way of accomplishing these things during a call. Going to the notes application during a call only partly works. In order to actually use that number you may have jotted down in notes, you have to find the file and call the number from the notes file...not very elegant. There should be a means of jotting down numbers while in the dialer (without sending out tones causing your voicemail to go crazy) so that you may call or save them during or afterwards.
Also, I may be wrong but, how do you add additional numbers to a contact without copying and then going into edit contact then pasting? For example, how do you add a home number to a contact that already has a work number without manually going into edit contact and adding it. There should be a "merge with existing contact" feature within the dialer menus.
Not bashing PhoneEx, because it is pretty good otherwise. But, I am a stickler for convenience features. I hate tons of button pressing and navigation to accomplish simple things.
WhyBe said:
Not bashing PhoneEx, because it is pretty good otherwise. But, I am a stickler for convenience features. I hate tons of button pressing and navigation to accomplish simple things.
Click to expand...
Click to collapse
That is your right, but not my problem.
Not bashing PhoneEx, because it is pretty good otherwise. But, I am a stickler for convenience features. I hate tons of button pressing and navigation to accomplish simple things.
lol so weird, phonex is sooo sexy i open it sometimes just to press the buttons in awe
spikegotti said:
lol so weird, phonex is sooo sexy i open it sometimes just to press the buttons in awe
Click to expand...
Click to collapse
Haha same here. It is super finger friendly and looks so un-WinMo D) like.
orelsi said:
Haha same here. It is super finger friendly and looks so un-WinMo D) like.
Click to expand...
Click to collapse
I tried to assign the dial pad to the call button, but I just get a dead PhoneEx screen. Is this a limitation of the trial version?
It works when I assign Calls or Contacts, but not the dial pad.
orelsi said:
Haha same here. It is super finger friendly and looks so un-WinMo D) like.
Click to expand...
Click to collapse
same...i think it's the most useful app in my fone.
WhyBe said:
I tried to assign the dial pad to the call button, but I just get a dead PhoneEx screen. Is this a limitation of the trial version?
It works when I assign Calls or Contacts, but not the dial pad.
Click to expand...
Click to collapse
Sorry, I can't understand what you want .
J-Pro or others,
what is the task manager in screenshots in first post?
It's not a biult-in one??
orelsi said:
1 - I don't know.
Click to expand...
Click to collapse
Thank you, it really helped me!
orelsi said:
2 - AEB Button Plus has such a feature.
Click to expand...
Click to collapse
Didn't know, thank you.
orelsi said:
3, 4, 5, 6, 12 - I use PhoneEx sorry.
Click to expand...
Click to collapse
Don't be sorry, it's up to you But I would prefer if somebody told me a way to do it without third-party soft...
orelsi said:
9 - Yes. There is a reg tweak, but I can't find it. Someone else should have it.
Click to expand...
Click to collapse
If somebody has it, please, post it here...
orelsi said:
10 - Never had that problem. Are you using a custom ROM?
Click to expand...
Click to collapse
No, my rom is R2A0010 UK WWE.
doministry said:
what is the task manager in screenshots in first post? It's not a biult-in one??
Click to expand...
Click to collapse
It's FdcSoft Task Manager
J-Pro said:
Thank you, it really helped me!
Didn't know, thank you.
Click to expand...
Click to collapse
You are welcome!
Don't be sorry, it's up to you But I would prefer if somebody told me a way to do it without third-party soft...
Click to expand...
Click to collapse
Sorry as in "I use superior product ftw" .
Unfortunatelly the nature of WinMo is that you need to add third party soft most of the time. That's the way it works.
orelsi said:
8 - I believe there is a text file in the Windows folder. I am not 100% sure though.
Click to expand...
Click to collapse
Checked all txt(and other) files in windows folder. There are nothing about wifi settings...
J-Pro said:
It's FdcSoft Task Manager
Click to expand...
Click to collapse
Thank you for help!
If you don't mind I'm asking, why do you want to check your phone uptime? Do you have a time usage restriction or something?
VNMenIeu said:
If you don't mind I'm asking, why do you want to check your phone uptime? Do you have a time usage restriction or something?
Click to expand...
Click to collapse
Just for fun My work computer can be running for month or so... Sometimes it's interesting for how much your X1 is powered on. For example, if I see any bugs on it, I question myself: "How long does this thing work? Maybe it's time for an SR?". If I found that it's only a day - I would be very curious. And if it's already a week - I do an SR without any additional thoughts That's my answer