Ok, I posted a thread on the main wizard forum and I'm trying again here since this is a little more on topic in this forum.
Here goes with all the technical specifics I can add in.
I recently got an HTC 8125 (I've had one before and never had this problem)
I immediately CID and SIM unlocked the phone using lokiwiz's unlocking program.
I inserted my tmobile sim into the cingular 8125 and all was great.
I upgraded the ROM to the TNT 19199 batch of WM6.1 Everything is still great.
The phone worked awesome, the next day I downloaded the T-Mobile UK radio version 2.19.11.
I flashed it to the phone and everything seemed fine, the program finished and the phone restarted.
Upon restart I was greeted with a no service message and the phone behaves as though it is shutoff. No big deal, right? WRONG...
I went to the tmobile and cingular site and got the default roms from each just in case.
I then connected the phone to the usb and activesync would not recognize the phone, or do anything for that matter.
I used an external USB bluetooth dongle to try and connect the phone to the PC to flash the default rom and fix the radio problem, this wouldn't work either.
I then put the phone into bootloader mode, this works ok, I see the USB in the corner and figure I'm saved. Nope.
I ALWAYS get an Error Connecting from the rom software. Even though my PC recognizes the phone, active sync does not. I re-installed Activesync and rebooted my computer numerous times. To no avail.
The ONLY rom software I which has worked is the TNT 19199 but it doesn't fix the lack of radio.
Here are some other points of interest. On phone bootup I get this:
IPL 1.08
SPL 1.08
<----Notice, NOTHING in the GSM spot.
OS 1.11.1.0.1 (or whatever the numbers are for that particular rom)
The USB will recognize the phone ONLY in bootloader mode, otherwise when the phone is on the Today screen I get no recognition.
The TNT rom has worked twice when I tried it, (by worked I mean it allowed me to re-flash the same rom) Of course the TNT rom doesn't work all the time, it has given me several connection errors.
No other rom has worked as of yet, all others give me a connection error.
The battery meter will not display, nor will it tell me what type of battery or how much charge is left.
The phone will sometimes go to amber light when plugged into the wall charger but NEVER with the usb to PC cable.
I can still navigate around the windows mobile 6.1 interface though it moves incredibly SLOW. i.e. I pushed the comm manager button to make sure the phone didn't simply get shutoff and I waited about a minute and a half or longer for it to bring up the comm manager.
I need some severely good advice and some new tricks to try, I'm running out of ideas, I saw several threads under the HTC TyTn threads about similar problems and something about the IPL/SPL being important but I'm not sure what they're talking about. I have searched this forum and I have found people talking about similar problems, all the responses point to, "If you can get to the bootloader you're fine." This is incorrect.
So seriously, help me out here.
HOW DO I FIX MY STINKIN' PHONE.
I would suggest rolling back to your working configuraton by reflashing using a memory card instead of the USB.
fixed.
Actually I finally figured it out.
It seemed the reason that those roms worked sometimes but not others was this: To get the phone to recognize you had to do things in a VERY specific sequence.
You had to let the phone boot all the way into WM6 and then plug in the usb cable. Then put it into bootloader with the camera / soft reset button method. Then you waited for the nice USB connect sound, and began the ROM flash RUU program. (In this case it was the T-Mobile default rom).
Once that was done the phone acts as normal and everything is good.
Doing anything out of order or putting the phone into bootloader without it having first booted all the way to the OS would give you the connect error.
Please clarify if you're running WM6 with IPL/SPL 1.xx? I believe that's not possible to get good results that way.
IPL 1.08
SPL 1.08
<----Notice, NOTHING in the GSM spot.
OS 1.11.1.0.1 (or whatever the numbers are for that particular rom)
TNT 19199 batch of WM6.1
Wm6.1 on ipl/spl 1.xx,strange ,how do you explain this,how did you manage to get wm6 installed with ipl/spl 1.xx,cuz it only works on ipl/spl 2.xx and higher. Are you sure its TNT 19199 series wm6.1 Rom ?
Related
So, I've unlocked my T-Mobile MDA G3 phone both CID and otherwise using loki. I've tried the T-Mobile update off their own site, and here is what happens. I suspect I need a different data cable, but I might be wrong there, so I figured I'd bring the issue to you all because you are the gurus of all gurus...type peoples.
So, here's what goes on. I download the software. I sync my MDA and my notebook. I ensure both machines are on and set to stay on. I check the connection and all is good. Heck, I've even backed up my MDA system using one of those backup utilities for Smartphones available online for trial download(which worked great, btw). So I run the software and click next and check everything it says the check and then it begins. This is where my problem begins and the goodness ends...
The MDA shuts off and just sits there. I don't touch it for fear of what might happen by being impatient, but every time, no matter which ROM I've tried to use for update purposes, the notebook pops up saying that it encountered a "communications error". It doesn't brick the phone, thank God. It simply just requires removal of the battery for 5-10 seconds after disconnecting the USB, then turning it on. It boots fine and all is good, except, no new ROM, same old 1.0.8.something version and bah!
I want to update my ROM and am stuck. I've tried at least 5 DIFFERENT ROMs and loaders and still the same thing.
I'm running the original T-Mobile ROM 1.0.8.something, IPL 1.X, and SPL 1.X. The phone says it's unlocked using the CheckLock program you can download from the forums, or elsewhere, I forget which. I've run the cidunlock with the loki tool multiple times and it finishes no issues.
If anyone has ANY ideas or thoughts, or even if they've run into this I'd like to know.
I'm pretty sure my phone right now won't do the whole A2DP via bluetooth bit, and that's what I'm REALLY wanting. I just got those Motorola HT820's and am anxious to play around with them more.
Anywho. You all rock and I've only been here like a day, but your information, walkthroughs, and just general geekiness(oh yeah, I work for the Geek Squad and we ALL use either the Verizon or Sprint version of the MDA, heh heh) have been most appreciated!
-----------
Originally posted under xda-developers > Wizard (Oops? )
I've been trying to find out how to actually load a firmware while my phone is stuck in bootloader (it locked up at 99% while loading a rom) and, while I still haven't solved the mystery of how to actually apply Wizard Love I have now a more pressing dilemma. My battery is dead. I don't have any way of charging the battery other than my USB cable, which doesn't appear to work now. Is there a way to charge the battery so that I can actually flash the phone without it dying?
I know that fixing the phone is possible, but I just haven't figured out how to do it. All the wiki's say is to flash it with Wizard Love, with little instructions as to how to go about it. Every time I try loading anything to it, I get a communication error. In boot loader I can see the USB connection establish on the phone screen, so I know I'm not dead. I'm just confused.
I was able to borrow an AC adapter from a buddy here that has a Hermes, but still am having trouble figuring out how to get the ROM fixed on the phone. I've tried a hard reset, and also I've tried loading wizard love, but receive the error because of no activesync connection to start the process. I've also been fruitless in finding MTTY commands for the Wizard.
All the threads I've looked through on loading from the bootloader are a bit absent of key information. Even this one http://forum.xda-developers.com/showthread.php?t=294107
doesn't get into detail about what the steps are to flash in boot loader. It does tell you how to prep (disable activesync, remove the SD card, reconnect to USB) but glosses over the flash method with "Run the Upgrade again and it will work fine without any problems." THIS is where I am having the most difficulty. I can't seem to solve the puzzle of how to upgrade straight from the boot loader. Any pointers would be greatly appreciated. Maybe I'm just missing a thread, but with so much information it's hard to find exactly what I need.
Boot up the bootloader screen. Connect your PDA to your PC. You should see USB on your PDA. Flash your device.
So I did end up getting my phone working again (yay). I had tried several times the morning I started this thread to run the t-mo 2.26 ROM with ill luck. It seems that it only worked when I took the memory card and the battery was COMPLETELY charged. I was then able to load buttons 1.05, run the unlock and then load a wm6 rom. I chose the Core 2.0 with blackberry support. Other attempts to get BES support on my phone under WM5 have ended poorly, so I am giving this a go.
I have read that many have had problems with MMS support for T-mobile. I too had loads of problems, but I was able to get it working by changing the gateway from 216.155.165.050 to 216.155.165.50. I did not add a seperate GPRS connection. I instead opted to to try to set it connect via WAP Network, and it worked like a champ. Other settings are as follows:
Port Number 8080
Sending size limitations: 300K
WAP version WAP 2.0
I decided to reflash my wizard after it continually getting slower and slower after a year. I haven't done it in awhile. It is already unlocked. I flashed the 1.05 rom and it was working. I was going to go up in steps ending with the touch rom. I flashed the wrong rom evidently and now am downgraded to 1.01 on spl/ipl and os 2.26.10.2. The wizard won't activate Activesync and I can't get any communication. I tried rebooting the pc and the wizard multiple times. Still nothing. Need something quick to fix this. Everytime I tried to launch a rom flash I get an error 206.
digitalmayhem said:
I decided to reflash my wizard after it continually getting slower and slower after a year. I haven't done it in awhile. It is already unlocked. I flashed the 1.05 rom and it was working. I was going to go up in steps ending with the touch rom. I flashed the wrong rom evidently and now am downgraded to 1.01 on spl/ipl and os 2.26.10.2. The wizard won't activate Activesync and I can't get any communication. I tried rebooting the pc and the wizard multiple times. Still nothing. Need something quick to fix this. Everytime I tried to launch a rom flash I get an error 206.
Click to expand...
Click to collapse
If it was already CID unlocked,there was no need to downgrade again 1.05,once CID unlocked will remain unlocked forever,unless you intentionally don't flash back the locking code back on to it.
Now try to get into Bootloaders (multicolor screen) hook up the phone with pc via usb cable and check small usb appear at the bottom of the bootloaders,if it appears then download the official stock rom and flash to recover back to the default status,then download the WST 4.2.2 tool and run the 'CID Action' button to verify the CID lock/unlock status of the phone.if its still CID unlocked then upgrade to any wm6 rom of your choice,otherwise perform the unlocking method again.If the usb doesn't appear,then you have a connectivity problem,check the usb cable or the mini usb port of the phone is faulty.Assuming you are doing on winXP.
"and check small usb appear at the bottom of the bootloaders..."
I don't understand what your talking about when you say bootloader. The bootloader is the ROM installation program is it not. How do you check an icon in that? If you mean system trays on the PC or PDA, no USB icon shows. I got no radio or sync services working. The OS is corrupted and operates extremely slow. I can't get any kind of communication between the PDA and PC. Not even through windows explorer (running XP). It's not the cable, I just used it to downgrade to 1.05 and it was working fine. It wasn't until I tried to upgrade to back up, and selected the wrong ROM off my USB storage, that it flashed the wrong ROM and caused all this. Mostly because I hate trying to remember what the longs string of digits mean on each ROM. Especially after I haven't looked at all the files and haven't done a flash in a year.
So no communication. That's the issue.
So does anyone else have any info? As I stated, I can't get any communication between the MDA and the PC. So I don't know how I can flash a stable ROM.
I repeat again,Get the phone in Bootloaders mode (multicolor screen) by pressing and keep holding down the camera button and at the same time either 'Soft Reset' or 'Power On' the phone,but keep holding down the camera button,till phone boots up in Bootloaders mode(multicolor screen),hook up the phone with pc via usb cable and check if small usb appears "At the bottom of the Bootloaders Screen" and not in the system tray of the pc. If it appears then follow the advise I gave you in my above post,but if doesn't appear then you have a connectivity problem.
digitalmayhem said:
"and check small usb appear at the bottom of the bootloaders..."
I don't understand what your talking about when you say bootloader.
Click to expand...
Click to collapse
The Wiki as all the (basic) info to get you started.
It doesn't work
I can get into Bootloaders mode with usb at the bottom. BUT, I can't get any connection to ActiveSync, any of the ROM update utilities and no radio network connections. That was the specific thing I'm telling you. If the Desktop and the PDA won't talk to each other, what am I gonna do? It's not the cable either. The Wizard Tool will not pick it up either when I used it to try to get device info. If your going suggest any kind of ROM or software off the forum, please specify exact version and title so I don't have to go through 100+ pages doing a search to find a specific piece of software off a vague title such as "stock ROM". You may know what it means because your always on the forum. When someone hasn't been back here in awhile they aren't going to remember some arbitrary string of numbers and letters indicating a certain ROM that they haven't used for a year. Too many of you "regulars" get all pissy about things when someone asks a question. If someone keeps asking the same questions, it's because the forum is NOT laid out in an easily searchable fashion unless you have specific search criteria for things such as CUSTOM_RUU_Wizard_1050412_WWE_10111210_WWE instead of "stock ROM".
Have you read the Wiki?
http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies
Or other posts?
You'd know by now that in bootloader mode ActiveSync or any other tool (that uses ActiveSync) can't communicate with the phone but that it's possible to upgrade a ROM using the official upgrade utilities.
Have you tried making a search and getting hundreds of undesired and repeated posts which makes you lose days searching for a specific thing?
If you'd been here as long as many of us you'd also be tired of people asking same questions. I was once a fresh member and i would always 'waste' my time than others'.
Also the forum search feature has been enhanced by using Google's search engine instead of internal.
There is simply no way I can express my deep and sincere gratitude for the information available in this forum. Let me explain and I think you may understand why.
Several days ago my wife and I received a couple of HTC 8125's from Ebay. Being a tinkerer I wanted to see what I could do so I upgraded mine to Mobile 6 with Touch-Flo.
The wife was skeptical and waited to see how it worked out. Of course she eventually decided to go for the Bling and handed me hers to upgrade as well.
As soon as the upgrade started on hers the pda went bootscreen and locked up. Sooooo I'm sweating bullets and searching the forums as fast as I can go before she finds out. Then I find this thread and the last post... Don't need Activesync to update as long as the device pops up a little usb on the screen when you plug up... I flashed the 8125 upgrade and *Bang*! Back in business. Continued the upgrade and all is well. The wife is now walking around with her "Bling" and happy and I am off the hook!
Thanks for the GREAT FORUM!
Rowdyone said:
There is simply no way I can express my deep and sincere gratitude for the information available in this forum. Let me explain and I think you may understand why.
Several days ago my wife and I received a couple of HTC 8125's from Ebay. Being a tinkerer I wanted to see what I could do so I upgraded mine to Mobile 6 with Touch-Flo.
The wife was skeptical and waited to see how it worked out. Of course she eventually decided to go for the Bling and handed me hers to upgrade as well.
As soon as the upgrade started on hers the pda went bootscreen and locked up. Sooooo I'm sweating bullets and searching the forums as fast as I can go before she finds out. Then I find this thread and the last post... Don't need Activesync to update as long as the device pops up a little usb on the screen when you plug up... I flashed the 8125 upgrade and *Bang*! Back in business. Continued the upgrade and all is well. The wife is now walking around with her "Bling" and happy and I am off the hook!
Thanks for the GREAT FORUM!
Click to expand...
Click to collapse
Thankz !
We all highly appreciate it,glad you got it working .Thats what this Forum is sooo famous for "Help & Care"
Hi All,I bought an 8125 Cingular Device (I am att),it had shells,and programs installed and unistalled so many time along with must have been 25 different trick little "Mod" programs,this thing didn't know which way was up, So I cleared the Storage and let it download all of the default stuff, THE IPL/SPL are both at 2.25. The Computer won't recognize the USB Connection though I can recharge through the port just fine,when in "Com Manager" there is no way to enable Activesync,no matter what it has a "Check" through it,i think it is hardware screwed inside.It has Windows 5 on it ROM Version 2.25.11.1 WWE Dated 5/11/2006,Radio 2.25.11,Protocol 4.1.13.12,Ext Rom Version2.25.11.102,I have tried many different things to get it to recognize the USB to Activesync with no go. I don't think it is CID unlocked or SIM Unlocked. Is there a way to Upgrade my ROM (from what I gather it is a G4)using the Storage Card? There was a shell from SPB on it that was all screwed up with Pocket Plus 3.2 ,My son put a SHell on it 3.01 Final in order to try to make it behave better,It was some better but it has had so many Mods in and out of it with I am sure shared files being deleted that I decided to clear storage.SO,Now I am back to stock with the SPL/IPL at 2.25 and A Non Functioning USB COnnection,I know the Cable and PC are good as we have several other smartphones in the House all working fine. I would like to put the Wizard 6.5 or a Cooked 6.1 on it.I have downloaded the 6.5 ruu and was hoping to install it with the storage card method.can the phone be unlocked by placing the lokiwizprog on the storage card with the PC?Thank You in Advance for any Info you can provide in Advance. I have read probably too many threads and confused and probably over complicated the process.I have seen the "bricked" posts and don't want to go there.It is not a matter of laziness that has me inquiring,I have upgraded several different types of phones and have been in the Satellite Hobby Many years ,so I am fluent in Flashing Chips,loading software ect. So Far I have Downloaded "the Buttom Rom","Lokiwizb", and the "6.5 Wizard Rom"Thanks,Vegas
In short you won’t be able to do any of the things you want without a functioning USB port.
So let’s find out if the USB port really doesn’t work.
Turn the phone off, press and hold the camera key, now insert the USB data cable, you must continue to press and hold the camera key until you see the boot loader screen.
On the boot loader screen you will see IPL SPL and on the bottom of the screen USB, if you don’t see the USB on the bottom of the screen then something is wrong with the USB port.
You suggest your phone is a G4 yet you put IPL\SPL “2.25”
If your IPL\SPL 2.25 = G3
If your IPL\SPL 2.25.0001 = G4
Same Issue
I'm having same problem on my wizard, however I resoldered the mini USB port.
It did pop up in Win 7 x64 generic RNDIS driver not installed, no other indications of it being connected, charges fine, boot loader detects USB at bottom of screen, tested on XP also with no positive results.
Hi All,
I've been running the Orange (UK) WM6.1 ROM for months/years without problems and was messing around with some texts and somewhere along the line I have ended up with the standard 4 stripes down the screen and some text top left.
I have scanned the forums here and the wiki and they suggest connecting using USB and running Mtty.exe, however whilst I can connect the phone using USB Activesync won't recognise it and then I get an error from Mtty.exe because it won't recognise the phone.
I have also tried re-intalling the Orange ROM as well as newer roms, but none of them seem to be able to connect to the phone.
Active sync doesn't seem to be able to connect on Win 7 or Win XP despite them syncing fine this morning.
So, any suggestions out there?
I'll do some more searching, but any pointers would be appreciated.
Thanks.
Try a new USB cable, I went through 5 in one year, or try flashing via SD card.
Well I tried a couple of different leads and no luck.
I did manage to get some info from mtty.exe, but didn't make sense.
I took my SIM out to use in another phone and having left the battery out for a while, put it back in to try again at getting it to start and it booted fine without any problems.
After a bit of messing around it seems like that the boot problem is either down to a problem with the SD card, SIM or a foreign object in phones casing.
I keep the phone in a pocket of my overals that I use a workshop and occasionally iron filings from a grinder can get into it's working, which is what I think has happened.
ANyway, it's back and working again, only need to keep it going until Orange can get some Desire HDs in
Hi!
Read those threads again,the solution is there.
1.Disable USB connections in Activesync menu (right click on green icon on the tray)-->connection settings-->untick "Allow USB connections"
2.Put your device in bootloader mode (yours is in it)
3.Start to connect it with MTTY to do what you want or just run an official Orange UK ROM update
If everything is fine,your device will be alive again.
After that install Hard-SPL to avoid problems like this.
BR
Scootie
P.S.:Sorry,I didn't read post #3,but it can be useful later.
One more tip:check the camera button.
Thanks Scootie,
I'll try the Hard-SPL thing - the jumping into boot loader seems pretty random, has happened a couple more times and I find I have to pull the battery for several minutes and then try a restart.
The camera button doesn't seem to do much other than what it is supposed to.
Pretty annoying since I have had the phone for 3 years, but have not had signal at home so hardly use it, and now we have signal due to Orange/T-Mobile merger from the beginning of the month the phone fails me :-(