Database Develop

Qtek 9090 stuck in bootloader

Help my Qtek 9090 stuck in the bootloader.
After updating to wm2005 fix4 i pressed Power + Softreset, and when the colored stripes shows on the screen, i press the two buttons Record+Camera. Then i see the three options. I changed them, second and the third to "yes" and then pressed on the mailbutton. My screen becomes white and thats it.
It doesn't boot on.
What did i do wrong and is my ppc def. dead?
GuidO

Had the same problem, with original O2 GER Rom.
I did downgrade to the newest Vodafone ROM, then upgrade again to WM5 - and I got into the menu

still doesn't work.
I get country error on all the original 2003se BA's and the error 113: extended rom update error
But when i load the wm2005 software it goes great until you have too push the mail button it stay's white.
It doesn't boot further.
If i resset my device i see the 4 lines [ blue-green-red-white] whit in the white line
R 1.13.00
G 1337.42
D 5.03.02 WWE
Is it possible that the problem is in de dutch language pack from buzzdev.net ? I did that instal it al the latest moment on my qtek 9090.
I still miss my qtek
Anybody???
GuidO
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Try to upgrade to the Vodafone ROM from the bootloader Mode (the white screen saying serial), with disabled Activesync (screen change to USB).

Have you followed the wiki Guide to the letter..?
http://wiki.xda-developers.com/index.php?pagename=BA_5.1.1700_build_14343_Upgrade
In addition to this, a simple search (located above) would have brought up replies from various persons stating that sometimes, you just need to be patient.. get to the white screen, go chill out for a while and then come back.. If I remember rightly, it's been reported that it can take ages..
Give it time and all will become clear..
Cheers!

Vodafone Rom gives me a country error and all the other will say the same.
Only the wm2005 patch 3 will installed on my qtek 9090 but when i do that
I still wait for at least 11 hours with a white screen when i pressed
the second and the third yes and then push the mail button.... :twisted:
Is there another solution to "unlock" my device?
GuidO

Imate K-jam Update problem HAS ANYONE HAD THIS ERROR ???

Hi i wonder if some one can help me i got a kjam (imate) but i still get invalid vender id ?? i tried many programs to unlock the cid but nothing works.
My problem is i want to remove te vender id so i can put in the dutch qtek rom.
PLEASE HELP ME
thanx allot in advance
(i got rom 2.16.9.1)

You need to use enablerapi first, then run the supercid unlock. Use the awizard latest beta to get both things done.

swadrian said:
You need to use enablerapi first, then run the supercid unlock. Use the awizard latest beta to get both things done.
Click to expand...
Click to collapse
i tried that but no succes i get an error Write error
??
any tips , it said the phone is unlocked but still get the vender id error so i think its still locked ??
gr,paul
here a piccy of the error
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

I have the exact same problem here, did you figure it out yet? Or anyone else? I'm really frustrated here...
Thanks
tcc1999 said:
swadrian said:
You need to use enablerapi first, then run the supercid unlock. Use the awizard latest beta to get both things done.
Click to expand...
Click to collapse
i tried that but no succes i get an error Write error
??
any tips , it said the phone is unlocked but still get the vender id error so i think its still locked ??
gr,paul
here a piccy of the error
Click to expand...
Click to collapse

I have the exact same problem here, did you figure it out yet? Or anyone else? I'm really frustrated here...
Thanks
tcc1999 said:
swadrian said:
You need to use enablerapi first, then run the supercid unlock. Use the awizard latest beta to get both things done.
Click to expand...
Click to collapse
i tried that but no succes i get an error Write error
??
any tips , it said the phone is unlocked but still get the vender id error so i think its still locked ??
gr,paul
here a piccy of the error
Click to expand...
Click to collapse

I have the same problem . I have only upgraded the rom form O2Uk for my Wizard. I can't use the other roms such as K-Jam, Qtek for it although I unlocked my wizard. The error appears regularly is "INVALID VENDER ID". Please tell me the way to fix it . Thanks.

When u get this error -"enter vendor id", is your phone still properly operational ?

When u get this error -"enter vendor id", is your phone still properly operational ?

Changing TEST ROM Splash Screens

Guys,
The GPS test ROM is great but the TEST ROM Splash screen is really bugging me - anyone know how to chnage this? Done it on XDA2i few years ago but dont know on Trinity.
Please help.

Splash screen is part of the NBH file, thus must be signed with private HTC certificate. You can't replace it unless someone finds a way to flash unsigned code on trinity.

I don't see how it can be that annoying.. I mean how often do you reset your trinity to see that message? I'm sure the official ROM would be out before someone's able to change the stored splash screen.

I see your point
Okay well it's not that annoying I can be a bit of a prefectionst. I know what you are saying just thought if its simple procedure then why not!
Pof - I think we should club together and get you a Trinity - would you be willing todo some dev work for it... i.e figure out a way to run unsigned code?

yeah, we can all give 2 € so that pof can buy a new p3600....

_onoff said:
yeah, we can all give 2 € so that pof can buy a new p3600....
Click to expand...
Click to collapse
I'm down, setup a paypal account dude

Sorry for my English
I change Splash Screen on my HTC 3600, SuperCID, SPL 1.01 MFG, see: http://wiki.xda-developers.com/index.php?pagename=Hermes_BootloaderMFG

incorect said:
Sorry for my English
I change Splash Screen on my HTC 3600, SuperCID, SPL 1.01 MFG, see: http://wiki.xda-developers.com/index.php?pagename=Hermes_BootloaderMFG
Click to expand...
Click to collapse
Yeah but I doubt we can do that on the Trinity.

Confirm Please that it worked and method used
incorect said:
Sorry for my English
I change Splash Screen on my HTC 3600, SuperCID, SPL 1.01 MFG, see: http://wiki.xda-developers.com/index.php?pagename=Hermes_BootloaderMFG
Click to expand...
Click to collapse
Guys, I hate these one liners sometimes - did it work for you? If it did work which method did you use to acheive it and are there any device requirements like SUPER CID etc... Your English is fine!
And does this mean you can run unsigned code?

I thought super cid'ing your device enables you to run unsigned code?

Doesn't seem that way....
forcedalias said:
I thought super cid'ing your device enables you to run unsigned code?
Click to expand...
Click to collapse
Doesn't seem that way but thats what I thought...

Please, anyone found a solution in order to change splash (and green windows mobile push mail) ?
thx in advance.
JaY

It's very easy
Splash screen :
http://wiki.xda-developers.com/index.php?pagename=Trinity_SplashScreen
I attach you my RUU_signed.nbh file with "two images" (It seems a GIF ¿or not?)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Push email (green screen):
Change the original welcomehead.96.png for a new "png file" overwritting it with Resco File Explorer, for example
Au revoire

Thx a lot, I'm going to test that !!!

My HTC Wizard blocked in BootLoader mode

Hi ...
i have an HTC Wizard witch is blocked in bootloader mode,
and when i try to flash a new rom, it seems to be done correctly
but when it finish flashing the rom, it return to bootloader mode
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
excuse gays for my very bad english ...

Hi,
I had the same problem with 2 HTC Wizard's G3.
I try this (http://forum.xda-developers.com/showthread.php?t=276963) and now they are running again.
good luck!

thanks men, but when i have tryd to do that,
i have got the folowing error:
any one know how to solve it.

If you are using a G3 Wizard, flash the Button's ROM to lower the IPL and SPL and getting a working OS, then unlock CID using Wizard Service Tool.
If you are using a G4 Wizard, flash the original stock ROM, then install HardSPL or SoftSPL and use RUU to flash your ROM.

hasni2005 said:
Hi ...
i have an HTC Wizard witch is blocked in bootloader mode,
and when i try to flash a new rom, it seems to be done correctly
but when it finish flashing the rom, it return to bootloader mode
excuse gays for my very bad english ...
Click to expand...
Click to collapse
Please re falsh your Spalsh Screens the 1st and second ones because when they are heavier then normal they are falshed but they dont let your Wizard Boot tht once happened to me too. TC

starkwong said:
If you are using a G3 Wizard, flash the Button's ROM to lower the IPL and SPL and getting a working OS, then unlock CID using Wizard Service Tool.
If you are using a G4 Wizard, flash the original stock ROM, then install HardSPL or SoftSPL and use RUU to flash your ROM.
Click to expand...
Click to collapse
Thanks,
but how can i do that...
i need more explanation...

hasni2005 said:
Thanks,
but how can i do that...
i need more explanation...
Click to expand...
Click to collapse
Just follow this guide correctly,you'll know what to do and how to do it :-
http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies

Blackstone WWE_1.56.405.1

Shipped Blackstone WWE_1.56.405.1
http://rapidshare.com/files/217231062/Blackstone_WWE_1.56.405.1.rar.html
Enjoy!
MOD EDIT HDuser 5.4.2009
Rom 1.56.405.1 (43972) WWE, Rom date 3/6/09. CE OS 5.2.20764 build 20769.1.4.5 radio 1.13.25.24 protocol 52.62.25.34U
From Football Post 14
Here 1.56 SPL from uploaded rom http://rapidshare.com/files/217323821/01_SPL.rar
From PW120 Post 63
attached is the rilphone.dll from this rom (radio 1.13.25.24) http://forum.xda-developers.com/showpost.php?p=3573994&postcount=63
From conflipper Post 85
Ship.exe http://www.mediafire.com/file/z5dnd...6.405.1_Radio_52.62.25.34_1.13.25.24_Ship.exe

from 1.19 to 1.56????
Anyone tested???

It is fake???

This is BIG FAKE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Guys i wanna to upset you, actually this is real rom, i have just installed it to my device and look at that. But it works prorerly on at original 1.56 SPL with 1.14 HSPL screen become green...if you don't believe extract nbh and look into that...there are a lot of new stuff...like manila "Version"="1.3.37395.0_1630.38"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Rapidshare link isnt working

Can someone upload that again? Looks interesting...

The link is dead. Original poster maybe, can you upload it again?

Anyone can mirror this , Thanks.

Link is down, please upload it again.
thank you

here another link... http://depositfiles.com/files/h0ozt35a7

Great! Downloading now...

Petro,can you upload this SPL 1.56 and HSPL 1.14?

Here 1.56 SPL from uploaded rom http://rapidshare.com/files/217323821/01_SPL.rar

Grabbing now, still playing with 6.5 a little but might install it later

Thanks for the upload.
flashed ok but screen also goes green on bootup on my device with HSPL 1.14, will try SPL 1.56

What do you mean green?

screen looks corrupted with lots of green on the background when its booting windows for the first time using hspl 1.14
can't figure out how to use this new spl, think i'll flash back to another rom to be safe

pw120 said:
screen looks corrupted with lots of green on the background when its booting windows for the first time using hspl 1.14
can't figure out how to use this new spl, think i'll flash back to another rom to be safe
Click to expand...
Click to collapse
Confirm.
Even with the second hard-reset, the screen is still greenish and graphic distorted.
KCJ

Yeah,need new hspl on 1.56, my device from UK and it has CID HTC_001 i restored original SPL and flashed whole rom and it's works fine...