Related
Well I would like to get another software because the orange software is pretty much the worst one you can get.
I’ve been trying to update from wm6 to wm 6.1 but I had to hard reset my phone many times cause whenever I try to flash the rom, I get that white screen that stay at 0% during the whole process to finally see an error not on the devise but well from the software (running on vista).
Please help!!!!!!
few things to remember befoe u do anything to ur phone:
1) read kaiser wiki
2) from wiki follow links on how to flash hardspl on to ur device.
3) go to kaiser rom development forum and read the first sticky containing info about flashing.
flashing hardspl will cid and sim unlock ur device.
Plz do read and search or u will mess up ur toy.
isn't there an issue with flashing orange ones something to do wit the radio and not to change it? I want to flash mine but the wiki isn't too clear on orange versions
doesn't matter what stock rom u have, once hardspl'ed u can flash any rom/radio u want to ur device.
just make sure radio works w/rom u flash. alot of chefs include radios w/their roms and ones that don'zt will tell u which radio works with rom
technocat said:
isn't there an issue with flashing orange ones something to do wit the radio and not to change it? I want to flash mine but the wiki isn't too clear on orange versions
Click to expand...
Click to collapse
I've flashed my Orange TyTN II with no problems. So long as it is unlocked to all networks it should be OK. However if you do it then your warranty goes out the window.
Run HardSPL first
Once it is installed, double-check that it is installed by doing the folowing:
Power off and then press power on while keeping camera pressed, this will enter the so called bootloader mode and you see a tri-color screen (Red, Green, Blue). You should see "SPL-1.0 OliPof" on the second line in the top left corner. You can exit this mode by means of a "soft reset": press the reset button with the stylus.
If it does not say "SPL-1.0 OliPof" then HardSPL is NOT installed.
Once HardSPL is installed you can then run jockyw2001's unlocker to unlock the phone to all networks.
Then you can flash ROMS like there's no tomorrow!
nice walkthrough mate what's the differences between the roms just peoples personal customisations? is there a huge difference from the orange version?
the chefs cook whatever they want into the different roms..basically just personal stuff or needs...so read what posts and see which one fits u most...if not...try some out and see which one u like...
Narfy, go over to read this thread ... it is one man's story of getting his Orange unlocked and 'sorted'
http://forum.xda-developers.com/showthread.php?t=386089
With an happy ending
Ok having problems trying to unlock my orange tytn2. Hard SPL is installed, Step 1 of the kaiser simunlocker has been done and verified. Following the instructions, I have reset the phone to boot screen and went to step 2, step 2 of course is a command and in xp this closes as soon as you open it. Have went to command prompt to run step 2 and it gives an error about unable to connect to usb: cannot connect to \\.WCEUSBSH001
Anyone any ideas am now stuck lol.
please ignore sorted now helps when you actually read forums lol
ive been looking around on this forums, ive found various roms and softwares to flash the touch hd to winmo6.5.
ive downloaded:
HSPLWrapper_Blackstone_156OliNex.zip
RUU_Signed_Blackstone_stockSPL154.zip
SSPL-Manual-TouchHD.zip
BlackstoneRUUWrapper.zip
and rom HD_WM6.5__V56__B23041_09022009.rar.
i have currently got 1.4 something on my touch hd. I found this when i turned it on by holding down the volume rocker.
but im not sure if i have the right files, cos ive seen some other ones around the forums. and im not sure which rom is the fastest to date. i dont want to download a laggy one which i have found some people have experienced. also, can i go back to winmo6.1 after going back to winmo6.5.
i just want to be sure before i do anything.
cheers in advanced
Used this guide when I first flashed mine. Only explains USPL method though iirc. http://journal.zenyee.com/2009/06/21/custom-rom-upgrade-for-dummies/
ill have a look at that. cheers for replying so quick.
USPL.
PDAFAN121 said:
ive been looking around on this forums, ive found various roms and softwares to flash the touch hd to winmo6.5.
ive downloaded:
HSPLWrapper_Blackstone_156OliNex.zip
RUU_Signed_Blackstone_stockSPL154.zip
SSPL-Manual-TouchHD.zip
BlackstoneRUUWrapper.zip
and rom HD_WM6.5__V56__B23041_09022009.rar.
i have currently got 1.4 something on my touch hd. I found this when i turned it on by holding down the volume rocker.
but im not sure if i have the right files, cos ive seen some other ones around the forums. and im not sure which rom is the fastest to date. i dont want to download a laggy one which i have found some people have experienced. also, can i go back to winmo6.1 after going back to winmo6.5.
i just want to be sure before i do anything.
cheers in advanced
Click to expand...
Click to collapse
yes USPL is the safest method, it is even advocated by Dutty Throy, been using uspl since my first ever flash (ive flashed dozens of times already). once you've mastered the procedure its the quickest method, if you find a ruu_signed.nbh file just rename it to BLACIMG.nbh and pair it with an ruu_blackstone wrapper. READ THE THREAD ON USPL. so far i've rarely encountered members posting problems they've encountered
i was considering uspl. but dont uspl last until reboot, so once you reboot your phone 6.5 will no longer run and will return to wm6.1. ill hav a look at the uspl cos at the moment im running spl 1.14 and it gets painfully slow at times. anything might b better than wat i got now
NO, thats not true, if you USPL it will flash it Temporary to rom that will allow you to flash the rom you want, once it has flash you will revert back to stock SPL, and keep 6.5, if you want to flash again you would have to USPL again before flashing another rom, the easiest way i find is to HSPL your phone with 1.56 Olienx, then you never have to worry about keep loading USPL first, and the BEST AND SAFEST WAY TO FLASH IS BY SD CARD. MAKE SURE IT IS UNDER 2Gb, take the rom image, thats the Nbh file, and rename it from RUU**** to BLACIMG.Nbh and put that on memory card, then boot phone into bootloader, by turning phone off and hold volume down and power button, plug in usb lead to phone and computer, make sure u got 30% battery or more, make sure it says usb and not serial on the bottom of screen then push memory card in, and it will auto load,another menu will pop up saying "press Power Button to Flash".
let it flash untill it says Successful, then reboot phone up to screen calibration, then do hard reset.
JOB DONE>
r8zer said:
NO, thats not true, if you USPL it will flash it Temporary to rom that will allow you to flash the rom you want, once it has flash you will revert back to stock SPL, and keep 6.5, if you want to flash again you would have to USPL again before flashing another rom, the easiest way i find is to HSPL your phone with 1.56 Olienx, then you never have to worry about keep loading USPL first, and the BEST AND SAFEST WAY TO FLASH IS BY SD CARD. MAKE SURE IT IS UNDER 2Gb, take the rom image, thats the Nbh file, and rename it from RUU**** to BLACIMG.Nbh and put that on memory card, then boot phone into bootloader, by turning phone off and hold volume down and power button, plug in usb lead to phone and computer, make sure u got 30% battery or more, make sure it says usb and not serial on the bottom of screen then push memory card in, and it will auto load,another menu will pop up saying "press Power Button to Flash".
let it flash untill it says Successful, then reboot phone up to screen calibration, then do hard reset.
JOB DONE>
Click to expand...
Click to collapse
he says he has 1.14.000 spl and in any case all wm 6.5 builds are 1.56 or 1.59. so firste he needs to upgrade to spl 1.54.0000 then use uspl or use hspl 1.56.olinex.
else he'll face greenscreen and touch problems..
ok, if your looking for assistance in flashing, use the dummies guide to flashing. It provides a step-by-step guide and explains the differences between USPL & HSPL. All assistance, downloads etc you will need can be found in that thread. Any further queries should be posted in that thread.
No need for another thread.
Thread closed
Hi Guys,
I've got the HTC currentyl configured with a custom ROM. Lately it has been giving me trouble in sending/receiving text messages, not receiving incoming calls, not downloading weather data automatially etc.
I did try installing a couple of different ROM's and had the same problem. So I thought I will go back to the original stock ROM and OS and see if I still have the problem and then get HTC support to look into it.
Now, the thing is, I dunno how to find the Stock OS. I found several threads with regards to going back to the stock ROM... but no one seems to talk abt the OS. I had windows 6.1 installed along with Manilla 2.1 on the phone originally.
Pls help me....
From this thread. It is basically the reverse of flashing. ie Flash rom and radio (normally in one package) and then flash to stock spl.
How to reflash Stock/Shipped SPL - STEP BY STEP
0. be sure to first restore stock OS, and stock radio. stock SPL is always to be done last!! (You can find stock roms here)
1. download your choice of a stock spl package from this post. (currently either 1.13, 1.14, 1.15, 1.54 - depending on the rom used)
2. also download the original hardspl from the attachments in the above linked post.
3. run the hardspl exe but do not click anything in RUU yet. just let the hardspl EXE extract the files for flashing.
4. the SPL you want to revert to is a .NBH file, put the stock SPL NBH in the extracted hardspl package, overwriting the original NBH file in it!
5. continue with the RUU (or if needed, run SSPL-Manual.exe manually, then run RUU when it goes to tricolour 1.07.OliNex screen), it goes to 100%, reboots, done.
+6. to verify, enter bootloader mode, see version number on tricolour screen, should now just say 1.14.0000 or any other version ending in .0000, but not ending in OliNex!
that's it.
+7. no worries: if your device is stuck in bootloader mode with Hard-SPL and you need warranty service, you can still flash stock SPL.
Click to expand...
Click to collapse
Please post further queries in relevant thread. Link already provided by ClydeB1 above
Thread closed
Hi, i'm totally new to flashing phones etc. I have a tytn II and was running windows 6 on it.
I Flashed it with Hard SPL, and then downloaded TPC 23053 Titanium Ultimate. It's the one on the thread that says you don't need to flash a stock ROM first.
I flashed it and all went fine, booted up and alligned the screen etc. It then rebooted itself then loaded back up. All seemed to be ok, sound and camera wasn't working. In the fourth post of the titanium thread, it says the recommened SPL and radio.
which are Recommended SPL 3.34 Radio 1.70.18.02
So i downloaded both, flashed the SPL and then the radio. Now when i boot i get a black and white image of a tribal kind of dragon. It asked me to setup the phone again so i alligned the screen again. Sound and camera now worked.
However, i was usuing it for a while and then for some reason programs stop loading, it says something like, it's write protected or make sure you have the correct security permissions. When i plug into the pc i can't get anything off the storage card or the phone, it says permission denied.
So when i reboot the phone, it keeps asking me to setup again so i lose all my contacts that i have added etc. I can turn the phone on and off and it's fine, but then eventually does the wierd permissions and access denied thing and when i reboot always asks me to setup the phone.
Can anyone help me as to why this is doing this? I read something about CID unlock etc, is it to do with that because i didn't perform this step.
Not sure why everytime i reboot the phone it asks me to setup the phone again, sometimes it doesn't, it's usually after it stops letting me open programs.
Thanks in advance and sorry for the long post.
Maybe reflash.
You should have posted this in the thread made for the rom.
Thanks for the reply, sorry it's in the wrong place.
Can i flash back to windows 6, is this possible as titanium is 6.5 and do you know where i can find the "stock rom" for the tytn ii.
I think the problem is i didn't flash to stock rom first, but i was already running the stock rom. What was on itwhen i bought it from the shop so it's the same thing isn't it?
Obviously you must have flashed Hardspl and sim/cid unlocked your phone. Upgrade your hardspl reflash with a stock 6.1 rom from the wiki .I know it says that you don't have to flash stock first, but when flashing 6.5 roms, it is always a good to flash stock first to clean out the extended rom.
Flash a stock rom , flash ultimate, hard eset and the set up.
Thanks, i will try it now. I'm following these instructions. Do i need to do all of this including the bootloader, or just to restore the OS to step 2? Also once done do i need to reinstall HardSPL?
1. Get the original ROM for your device (HTC or ATT)
2. Flash the OEM ROM to your device (this will restore your OS but not the bootloader, we'll get to that below)
3. Copy the ROM to a temp folder and extract it, I use WinRAR, just right click on it and select "Extract to Here"
4. After extracting the ROM you should have a several files here, one called RUU_signed.nbh is the one we're looking for. Copy this file to another empty temp directory.
5. Download NBHExtract and follow the instructions in the link to extract the NB files from the ROM (essentially just copy nbhextract.exe to the temp folder where the nbh file is and run it from a command line - like so C:\temp\kitchen\>nbhextract.exe RUU_signed.nbh
6. You should now have several .nb files in that directory, the one we're interested in is the 01_SPL.nb.
7. Now you have to create an NBH file with just the SPL, to do that download htcrt (HTC Rom Tool).
8. Run the tool and under the ROM Builder tab select Kaiser, the rest on the left side doesn't matter right now. On the right side of this window click the "..." next to SPL and select the 01_SPL.nb you extracted from the OEM ROM. This should be the only thing added under Firmware Contents. Click Build ROM.
9. You should now have a NBH file that is relatively small (about 258K), copy this NBH file to a new empty directory
10. Download pof's KaiserCustomRUU.exe and put this in the same directory used in step 9. Don't run this yet.
11. Download pof's SSPL-KAIS.exe and copy it to your phone
12. Run SSPL.KAIS.exe from your phone (make sure you do this on your actual device and not your PC)
13. When you have the bootloader screen on your phone run KaiserCustomRUU.exe from the folder used in step 10.
14. After it's finished verify your SPL by holding down power and camera buttons while doing a soft reset.
15. Send your device back for warranty repair or replacement.
No you don't have to do all that. That is just if you want to restore your phone for warranty return. All you have to do is go to the wiki. http://wiki.xda-developers.com/index.php?pagename=Kaiser_ROMs and download a stock rom to your desktop. Connect your phone and run the RUU and follow the onscreen.
After your phone is flashed with stock, just reflash Ultimate the same way.
First however , enter bootloader , depress camera and power button while soft resetting, and check your spl, if it is still 1.0 olipro , upgrade it first to 3.29 or 3.34 using this guide. http://forum.xda-developers.com/showthread.php?t=498320
Once your phone is hardspl'd you never have to do it again
Thanks very much for your help. I have 3.29 on there at the moment, should i flash to 3.34, then flash to stock rom, and then to ultimate again.
Or flash stock rom, then 3.34 SPL and then ultimate?
Mitchsnake said:
Thanks very much for your help. I have 3.29 on there at the moment, should i flash to 3.34, then flash to stock rom, and then to ultimate again.
Or flash stock rom, then 3.34 SPL and then ultimate?
Click to expand...
Click to collapse
You can do it both ways it doesn't matter since you already have hardspl on your device and basically you are updating the current 3.29 to 3.34 to have a better performance with the ultimate rom.
I downloaded 3.34 SPL, and transfered the 3 files, JumpSPL1.56-KAIS.exe and JumpSPL1.93-KAIS etc to my device, it then says to take the battery out.
However, when i do this my device hard resets, i have to setup the phone again. Because it hard resets it deletes the 3 files so i can't run JumpSPL1.56
How important is taking the battery out after transferring the files to my device. How can i get round this, shall i just run the file without removing the battery?
Mitchsnake said:
I downloaded 3.34 SPL, and transfered the 3 files, JumpSPL1.56-KAIS.exe and JumpSPL1.93-KAIS etc to my device, it then says to take the battery out.
However, when i do this my device hard resets, i have to setup the phone again. Because it hard resets it deletes the 3 files so i can't run JumpSPL1.56
How important is taking the battery out after transferring the files to my device. How can i get round this, shall i just run the file without removing the battery?
Click to expand...
Click to collapse
No, it's important to remove it. How long are you leaving the battery out for? And was it over 50% charge before you removed it?
I'm assuming you followed steps 1-4 to the letter.
1. Copy JumpSPL1.56-KAIS.exe, JumpSPL1.93-KAIS.exe and JumpSPL1.94-KAIS.exe to your device memory (NOT STORAGE CARD)
2. Pull out the battery and reinsert it (this step IS important) *DONT turn phone back on yet*
3. REMOVE SIM and SD CARDS!!
4. Turn phone back on and let it boot back into your operating system
It sounds like there could be a hardware problem from all the hard resets happening there. Have you made sure that the reset button at the bottom is functioning correctly and isnt blocked by any dirt etc?
Mitchsnake said:
I downloaded 3.34 SPL, and transfered the 3 files, JumpSPL1.56-KAIS.exe and JumpSPL1.93-KAIS etc to my device, it then says to take the battery out.
However, when i do this my device hard resets, i have to setup the phone again. Because it hard resets it deletes the 3 files so i can't run JumpSPL1.56
How important is taking the battery out after transferring the files to my device. How can i get round this, shall i just run the file without removing the battery?
Click to expand...
Click to collapse
I wouldn't complicate things that are more than clear. The intructions literally says the following: 2. Pull out the battery and reinsert it (this step IS important) *DONT turn phone back on yet*. Just follow them, probably mskip for doing this tutorial spent a lot of time "trial n error". It really won't take anytime to do this step
Yep i follow those steps. I leave the battery out for about 30 seconds as it says. But obviously it hard resets so i can't do this at all as the files aren't there when i put battery back in. I have to set up the phone again.
I suppose i could just flash the stock rom, then see if that works when i remove the battery and then i can update the SPL? soft reset isn't blocked by dirt either.
If that fails i'm stuck with a bad phone
Mitchsnake said:
Yep i follow those steps. I leave the battery out for about 30 seconds as it says. But obviously it hard resets so i can't do this at all as the files aren't there when i put battery back in. I have to set up the phone again.
I suppose i could just flash the stock rom, then see if that works when i remove the battery and then i can update the SPL? soft reset isn't blocked by dirt either.
If that fails i'm stuck with a bad phone
Click to expand...
Click to collapse
Well yeah... if you had read it all you would know that you are meant to be doing all of this using a stock rom on your device. There's your problem right there.
If you already have hard spl on your phone so you don't need to go through all the steps of flashing hardspl for the first time. Just upgrade the easy way from the SD card.
I have had 3.29 on my phone and have flashed over a hundred times with never a problem, including Ultimate several times. Just try flashing a stock rom first and then Ultimate. Then hard rest and then setup the rom. If i works great, if nt then you can always upgrade your spl later.
Stuntdouble, theres no need to be like that, some people are new to this, and if you had read my previous posts you'll see that i didn't flash to stock rom first, because i'd just got it from the shop, so the stock ROM was already on it. I didn't think i needed to flash it with the same one again first. Thanks for the help though everyone, I've now flashed stock rom, and gonna try ultimate again/
Sorry, but the amount of people on here who don't actually read FAQ's/Stickies before flashing their device don't get much sympathy from me. I think people underestimate the risks involved when flashing for the 1st time. However i've been having a bad day so I apologise for snapping.
Yeah no worries, it annoys me too when there are tutorials yet people can't be bothered and just post asking how to do something. But the only reason i didn't flash a stock ROM was because i got it from the shop so didn't think i needed too.
There is something i would like to know though that i can't find how to do. I'm trying to install 3.34 Hard SPL now, i have 3.29 at the mo. I don't have a card reader unforunatley so can't format my card to FAT32 like it says to if installing from card.
Is there an easy way to upgrade it other than using storage card? Or can i do the same steps as when i first did it. i.e, run the JumpSPL 1.56 but instead of opening the 3.29 KaiserCustomRUU, i open the 3.34 Kaisercustomruu?
I apologise if this info is anywhere, but i've read all the faqs and searched google and can't seem to find a guide on upgrading SPL from 3.29, it only tells you how to first install 3.29.
Thanks.
Off with their heads!
Ok i ran JumpSPL 1.56 and then ran the KaiserCustomRUU of the 3.34 Hard SPL, now when booting i get the dragon spaslh screen, but when i go to bootloader, it still says 1.29.
What am i doing wrong?
Fixed this now, thanks for everyones help appretiated
ZEMONTI said:
Since i broke my LEO, recently i got a TMOUS. This evening i lost couple of hours, looking for tutorial for nubbies, but nothing.
There are so many treads with "dont use it with TMOUS, that i'm scared is it safe to flash a ROM at all.
Even basic things like SPL and HSPL are only in the general section with "not for TMOUS".
Am i missing something?
Click to expand...
Click to collapse
So, i'm starting:
1. Be sure that you have T-mobile USA version (TMOUS)! It's in the settings/about phone/hardware information/flash size 1024MB (not 512).
2. Check your HSPL version! To do that boot your phone with pressed "volume down"
5. Never flash a radio lower than 2.06.50.x
6. Never flash a radio with a 51 (x.xx.51.x) instead of a x.xx. 50.x It's in settings/about phone/software information/radio version
Dictionary:
SPL ...............
HSPL................
SSPL.................
Cooked ROM - Custom operation system, ready to be flashed on your phone
Stack ROM - Factory operation system
So despite i'm a complete nubbie, i'm starting research for such a tutorial.
Seams like the basics are:
1 SPL
2 HSPL
3 Flash ROM from SD card
or
Flash ROM from PC
I'm starting to took tor software, not made "LEO only"
It will take more research, then i tough.
First i have to clear for myself what exactly are SPL, SSPL, HSPL, when we need them and which is first.
And what exactly is RADIO.
Go to the regular hd2 rom dev thread, find the sticky
Sticky: [REF] HD2 STICKIES | USEFUL INFO | POSTING RULES - Read before posting
In there is at least 1 tmous specific noob flashing thread link, but I would advise you read them all over the next week.
You have one thing to be scared of.
never flash a radio (look it up) lower than 2.06.50.x and never flash a radio with a 51 (x.xx.51.x) instead of a x.xx. 50.x
This translates also into never flash any stock rom except tmous stock roms.not because of the rom but because all non tmous stock roms contain ..51.. radios.(well except the latest, but it still wouldn't work)
In just about all situations, you as a tmous user can skip instructions to flash compatible radio,,, yours already is
Thanks.
I'll use it
More advices, please!
Like Samsamuel said the biggest thing TMOUS users have to fear is flashing the wrong radio version to their HD2. The wrong radio means instant death (brick) for a TMOUS HD2. You have already as well as Samsamuel has already meantioned the right and wrong radio versions.
The radio controls reception of your HD2. With out the most up to date radio you might have trouble with bad reception and other things. For more info on radio go to " [RADIO] The HTC HD2 Master Radio Thread " in the HD2 Windows Mobile 6.5 ROM Development section here on XDA. Here is a link to the thread.
http://forum.xda-developers.com/showthread.php?t=611787
Go check out this thread "[TUT] Flashing your First GSM USA 1024LEO ONLY!! (For Noobs)" in the HD2 Windows Mobile 6.5 ROM Development section her on XDA. Here is a link to it.
http://forum.xda-developers.com/showthread.php?t=653614
Also for your beifit of knowledge you can flash a ROM, radio, splash screen, MAGLDR, and Clock Work Mod (CWM) via SD card. Basicly anything that uses a .nbh file to flash with you can flash via SD card by changing the name to leoimg.nbh coping it to the root of your SD card and then put your HD2 into bootloader with the SD card in your HD2. Go to HD2 Windows Mobile 6.5 Q&A and General and check out the thread "[TUT] Flash your ROM / Radio via microSD" here on XDA. Here is a link to it.
http://forum.xda-developers.com/showthread.php?t=681317
If you are interested in installing NAND Andriod check out these two guides. This one by Senior Member MSkip in the HD2 Android NAND Developmen titled "[GUIDE] Flashing Your First HD2 NAND Android Rom [For Newbs]" here on XDA. Here is a link to it.
http://forum.xda-developers.com/showthread.php?t=893948
And here is the guide by Member Gunjaman in the General descussion>Upgrading, Modifying and Unlocking section. The thread title is "the Definite Guide: How to Install NAND Android on HTC HD2 w ClockWorkMod Recovery" here on XDA. Here is a link to it.
http://forum.xda-developers.com/showthread.php?t=939682
Also these guides can be used to a certain exstint to flash Windows Phone 7 but CWM does not work for WP7 there for it is not needed or usable when trying to flash WP7.
One last thing any section you are in here on XDA especially the HD2 sections always look at the stickies cause they are not stickies for no reason. They are sgickies because they are very useful and informative.
Neither Google, neither XDA-search helped me to find topics how to check is there HSPL on the phone and which version.
ZEMONTI said:
Neither Google, neither XDA-search helped me to find topics how to check is there HSPL on the phone and which version.
Click to expand...
Click to collapse
I got that and put it in the tutorial
I assume you figured out how to check your SPL version on the HD2. But just incase you didn't you have to turn the HD2 on but hold the volume down button down while it is booting up and it will go to bootloader. Also for your benifit SPL stands for Secoundary Program Loader. SPL can be changed by flashing via USB cable and computer. HSPL stands for Hard Secoundary Program Laoder and HSPL can not be reverted back to SPL by flashing via USB cable and computer, you have to flash via SD card to do this or use the HSPL utility to choose the SPL you want flashed. SSPL stands for Standard Secoundary Program Loader (I thinknot positive) and it is like SPL and can be hanged by flashing via USB and computer. OSPL stands for Original Secoundary Program Loader and is like SPL and can be changeed by flashing via USB and computer.
If you are wondering about the .nbh files I mentioned in my other post. This type of file is a Hermes file that is used spacificaly with HTC devices. Google it and you can find more about it.
This is how you Hard Reset a HD2. You hold the volume up and volume down buttons down and turn on the HD2. When the multicolor screen comes up it will give instru tions on the screen to press the volume up button to resef or press the volume down button to cancel. press the vume up button and it will reset to factory settings. You can alsi do this by going to Settings/Security/Factory Reset. You will have to enter 1234 and hit ok and tbe pbone will reset to factory settings.
Anything else I can do to help you out let me know either here or PM me.