Yes, just figured it out. Not sure if anyone else has ever got it working on the Kaiser but I just installed theses 2 CAB files from my ETEN M800 original PRE-INSTALL CABS because they were ones installed that had the MMS working on the M800 and bingo, it works on the Kaiser. Anyone interested in the CABS, let me know. I can send out for someone to host them. They dont seem to do anything else to my Kaiser but MAKE THE MMS WORK!
Raspster said:
Yes, just figured it out. Not sure if anyone else has ever got it working on the Kaiser but I just installed theses 2 CAB files from my ETEN M800 original PRE-INSTALL CABS because they were ones installed that had the MMS working on the M800 and bingo, it works on the Kaiser. Anyone interested in the CABS, let me know. I can send out for someone to host them. They dont seem to do anything else to my Kaiser but MAKE THE MMS WORK!
Click to expand...
Click to collapse
Just a couple of questions.
1.) which ROM are you using. WM6 or WM6.1
2.) What version of ArcSoft MMS are you using?
3.) Which Palm threaded SMS are you using as there are many variations out there.
ROM is WM6.0
Just uninstalled Arcsoft as it is now not needed.
Its the Palm threaded labeled WM6 version.
UPDATE - I just realized its the ETEN PHONE SERVICE 2.0 that enabled the MMS in the Palm threaded! I have not tested incoming MMS's but I was getting them on my M800 with this CAB installed. ****ty Sprint phone is my other service and they are blocking MMS's so I cant send with my other phone but I have been able to send thru the MMS in the Palm with zero problems!
Raspster said:
ROM is WM6.0
Just uninstalled Arcsoft as it is now not needed.
Its the Palm threaded labeled WM6 version.
Click to expand...
Click to collapse
Man I was hoping that you were going to say WM6.1
I have a .cab package that works w/ Arcsoft MMS 4.2.8.1 and Palm threaded SMS.
Well, I have WM 6.1 on my Glofiish M800 and the MMS in the Palm threaded is working no problem in that so I don't think WM 6.1 is any problem.
send the files here.. ill try it.. cuboosh[nospace]@[nospace]gmail.com thx.
This has always worked for me with MMS.
http://rapidshare.com/files/89233954/shogunmark_wm6_threaded.cab
I send/recieve MMS with the original mms prog and the SMS is taken care of by palm threaded...
SH4YD33 said:
This has always worked for me with MMS.
http://rapidshare.com/files/89233954/shogunmark_wm6_threaded.cab
I send/recieve MMS with the original mms prog and the SMS is taken care of by palm threaded...
Click to expand...
Click to collapse
hey
i've installed it now
and if i press the sms icon...it doesnt take me there..it goes to like either windowslive..outlook and such..no more sms? anyway to fix this??
TIA
SH4YD33 said:
This has always worked for me with MMS.
http://rapidshare.com/files/89233954/shogunmark_wm6_threaded.cab
I send/recieve MMS with the original mms prog and the SMS is taken care of by palm threaded...
Click to expand...
Click to collapse
i want to smack you.. this guy claims MMS is working from inside the palm app..no need for ARCsoft
That is correct. I will email you the file tonight to host it. Its a small cab that does not do anything elce that I can tell other than enable the MMS part of the palm threaded. Only problem I have is when I take a picture that is set to 3 megapix it does not scal the picture down to 300k or smaller. Is there a way to set something to send up to 600k...? A reg hack or change? I had to set my camera to 1 megapix to get the picture file to 300k or less. I know the treo 750 would auto crop down the picture but this is not working on other phones that have it. It also seems alot more stable than the ARCsoft MMS. I was getting every pic, voice, vcard that came thru 100%. I also installed the CAB to my friends 8525 and it works on that also. Looks like it works with any GSM phone ATM... Very nice find as I like the threaded in the palm version better than the one in WM6.1.
bapass, You gotta set it up to direct you to the palm threaded somehow. I thought when you install the palm threaded app, it automaticly sets that. Atleast for me it did. What version of the palm threaded are you using..? If you are using the HTC home plugin, the SMS on that will send you to the palm if its installed. Then you can do the REG edit to get rid of the ARCsoft or just un-install the CAB if you are using that version but since the TILT has the MMS out of the box attached to the SMS, it should get rid of it for you when you install, but this is different with every different version of the palm threaded out there. Mine is the one labeled WM6 PALM THREADED. Hope this helps.
cuboosh, you got mail.
ok, as raspster stated it actually works! now i need to find the regedit to disable arcsoft from taking the MMS before i fully uninstall it.. damn it i know it was on 4winmobile.com b4 but now i cant find it.. but yes i can verify i can send MMS from inside the palm app on my tilt!!!!!!!!!!!!!! CONGRATS MAN!
there is a reghack for 600k ill try to find it and reply back.
ok i tried regedit to 600k its not sticking.. but i have it sucessfully working both ways.. if you use exchange for email u can just disable arcsoft by making the following change..
edit the registry to rename HKLM/Software/MS/Inbox/SVC/MMS1 to MMS1OLD, Soft Reset.
now you dont have to uninstall it!
i am sucessfully sending/receiving MMS inside of the palm app using the cab file raspster posted and this regedit.
UPDATE!!! ive also figured out how to get it to auto re-size picture.. im currently testing it once i get it to work flawless ill post intrsuctions! its looking good so far though!
Thats great cuboosh!! I am so glad we got this working right! The palm threaded is by far the best I've seen for WM. Now it is finally complete! If you can get the re-sizing to work, we will be golden as then I can MMS the million PIC's I currently have that were taken at 3M. LOL
GREAT NEWS! it WORKS! fully 100% including picture resize! i will be posting the .zip file which contains the files/.reg files you need + instructions! and ill link to this thread once done
cuboosh said:
ok i tried regedit to 600k its not sticking.. but i have it sucessfully working both ways.. if you use exchange for email u can just disable arcsoft by making the following change..
edit the registry to rename HKLM/Software/MS/Inbox/SVC/MMS1 to MMS1OLD, Soft Reset.
now you dont have to uninstall it!
i am sucessfully sending/receiving MMS inside of the palm app using the cab file raspster posted and this regedit.
UPDATE!!! ive also figured out how to get it to auto re-size picture.. im currently testing it once i get it to work flawless ill post intrsuctions! its looking good so far though!
Click to expand...
Click to collapse
I have a Palm Treo 680, do you have anything that will allow me to recieve my pictures in regular size?
Charles P.
Related
Please note, that I have confirmed that MMS settings are correct, I have done manual entries and Lurche's cab...
However with my new unlocked Tilt, I cannot get my MMS to work. I just get an "Error Synchronizing"
If I put back my SIM card into my old TyTn, I can do a Send/Receive no problem.
Does anyone have any thoughts as to what I can do/test?
Thank you!
...and all of a sudden, I just received an MMS!
I still get an Error Syncing, but it seems to work!
Please disregard!
MMS Help
Mine still doesn't work and I have the same problem as the guy above me. All settings are correct. But whenever I click on send/receive, I get an error synchronizing message. I am able to send but not receive. Help!
Are you using a threaded add on? Have you made any changes (ROM or apps) that would make this happen?
I've just flashed my tilt with Dutty's Dual v4. It also didn't work when I had v3, didn't test it with the stock ATT ROM though. My 8525 used to be able to send and receive without problems.
Since I am not familure with Duty's roms, I dont know what is on them. However, my Tilt, which has the Palm Threaded cab added, gives me the same error. But, even with the errors, my MMS works fine.
Are you able to send and/or receive any MMS?
In the settings for the MMS server, ensure that you are using ATT (or whatever) for the default setting.
I'm not sure about the palm threaded cab... what does it do? I am able to send (I think) but definitely not receive.
Is your user agent set correctly? & if you're AT&T you need the proxy cab.
I'm on tmobile with an unlocked tilt.
I've posted my problems several times before.
I'm on US ATT with a Tilt using Duttys v2. The message says it was successfully sent but the recipient never actually gets the message. Strange part is that I can send to an email address just fine and can send to myself just fine. All of my settings are correct.
I'm on US T-Mobile and I've never had a problem sending or receiving MMS. My only problem was receiving small pics but thats fixed with the wspheader cab. BTW I mustve used 5 diff roms by name and currently using duttys v4. what radio are you using?
To the original poster, I never had to manually enter anything or use any cab to receive any mms. once the configuration is done and soft reset everything should work fine.
To the second person that had the problem i see your using the radio that i had with duttys v3. once i went to v4 i couldnt connect to the internet at all so that might be the problem. try using 1.27.12.11
MMS intermittent several days of effort very frustrating
I have searched hi and low and spent hrs reading posts on all the problems with mms not working on t mobile. My problem seems to be an isolated problem?
I did not get the mms at first so I put in the settings posted. I tried both wap.voicestream and the internet2.voicestream.com... and still the same problem. I then tried the 29.99package cab that was made. and a day later still the same problem.
I have a Tilt with htc dutty rom
the numbers at start up are
r 1.64.06.04
g 25.70.40.02w
d 1.60.00.00
After running the 29.99 cab it seems to be more stable with email accounts and increased the send to 300k but the mms is intermittent.
When I get the message it shows the text box at the bottom of the today screen. If I do not click on it right away when it goes away it never shows up on the message alert icon in the middle of the today screen it also does not show up in the mms area conversation or not(gone forever). Then sometimes maybe 4 hrs later one might all of a sudden load??? and appear even after it attempted to download the first time earlier in the day???
Then sometimes it will download and notify, if I click on it right away I can view the text and pic, once I press close it never shows up in the mms area? Like its gone to the TILT angels to never be seen again??? Then sometimes it downloads and starts a conversation and works normal??? (Very rarely though)
I have tried several settings my internet works with auto or all settings I have tried. Its just the mms receiving. Its hit or miss? Any suggestions I would greatly appreciate. If you need any numbers or other info let me know and much thanks.
godfa7h3r said:
I've posted my problems several times before.
I'm on US ATT with a Tilt using Duttys v2. The message says it was successfully sent but the recipient never actually gets the message. Strange part is that I can send to an email address just fine and can send to myself just fine. All of my settings are correct.
Click to expand...
Click to collapse
for ATT you're most likely missing some registry settings. does dutty's rom have arcsoft cooked in? i have a cab that 100% works with ATT. click the link in my sig and install Arcsoft 5_0_31_16 in my first post or Arcsoft 5_0_31_19 from my second post.
akadonny said:
for ATT you're most likely missing some registry settings. does dutty's rom have arcsoft cooked in? i have a cab that 100% works with ATT. click the link in my sig and install Arcsoft 5_0_31_16 in my first post or Arcsoft 5_0_31_19 from my second post.
Click to expand...
Click to collapse
These cabs do work for picture MMS but not for video MMS unless you have changed something recently. There are very few ROMS with working video MMS on AT&T. Dutty's latest and the Death beta both work for sure. I've flashed to many times lately to remember what others. I should start making a list.
I don't know if your up for changes...but try my new rom under my signature.... MMS is working perfect for AT&T.
If anything, download it, extract it, and look at my MMS settings if you would like. I was having problems sending to Verizon customers until now. Either the network is fixed or my MMS is great! I'm going with the network being fixed.
ryncppr said:
I don't know if your up for changes...but try my new rom under my signature.... MMS is working perfect for AT&T.
If anything, download it, extract it, and look at my MMS settings if you would like. I was having problems sending to Verizon customers until now. Either the network is fixed or my MMS is great! I'm going with the network being fixed.
Click to expand...
Click to collapse
If sending to verizon make sure your message size is under 300k. They can't receive larger. Have you tested video mms on your ROM? Create a message. When you go to add a video, tap and hold the video and select play. If it plays within arcsoft then yours should be working. I haven't gotten the chance to test your ROM yet but I will.
what about using it on T-Mobile?
The problems i stated previously in my earlier post are for T-mobile? Is there other options or suggestions other than the ones I posted? Thanks.
maybe this is related...
I am on at&t, but I think it might apply to t-mobile, who knows.
I used the htc autoconfig for a wm6.1 rom and had several anomalies with my connection settings. I tried a lot to fix them and am still pretty sure I had the settings right. The only thing that fixed it was taking the advice of a poster which I tried to avoid.
The advice was to not use the automatic connection settings but to use a cab to install them instead.
So I hard reset and never looked back.
Point is that you most likely have a setting issue, but I couldn't fix it after autoconfig. I tried deleting the settings and installing the cabs, but still had random issues.
Dutty's hybrid apr 29 worked fine for me.
ryncppr, nice rom
Tmobile and mms issue research dutty dual touch
UPDATE:::
I did a hard reboot and started from scratch ignored the auto network setup. I then tried to install the joe2995 tmobile cab. It would not do anything without already having the settings setup, then it adjusts them. So I then tried to manually set them up and I used tmobile wesite they actually show the tytn 2 phone and settings. And that was where the questions began. I soon learned the settings for MMS was not in the phone where it said, materafact I could not find them at all. I have duttys dual touch and wondered if that was the issue. So I started some intense investigation and found that the settings are only achievable if you setup an email account. The mms server settings only show in the menu of the email account? Is this just a software setup issue? or does it effect the mms because its located in the email area. I dont have the code and do not know what order it was written in so Its only a question. I did more research on the site and found that everyone with duttys dual touch and tmobile posts said they were having this sort of problem. And yet others with duttys other versions were ok. Anyone's insight would be appreciated? I also put the correct settings in the mms server area and still having intermittent mms issues, as posted in previous post. Anyone with duttys dual touch version and tmobile ok with mms and photo send and receive??
No MMS ATT
I have the new gullum throttle diamond rom and was able to send/ receive mms before the flash i installed arcsoft v 4.0.31.28.2 and it restored the multimedia option under messages but i can neither send nor receive even though messeges say sent
I first purchased my tilt on nov. 28 and on jan. 11 it would not sync to my pc. To make a long story short ATT sent me a new Tilt. When I recieved the new phone I simply installed wm6 threadded app for higher aku version phones. No messing with hidded files, just a simple .cab install and it works fine. Hooray
did get the mms part of the palm app to work? i've been using this palm threaded app since i got my kaiser last october, and sms threading works fine, easy cab install. just that mms gets an out of memory error.
uc4life said:
I first purchased my tilt on nov. 28 and on jan. 11 it would not sync to my pc. To make a long story short ATT sent me a new Tilt. When I recieved the new phone I simply installed wm6 threadded app for higher aku version phones. No messing with hidded files, just a simple .cab install and it works fine. Hooray
Click to expand...
Click to collapse
Hi:
Like the second poster, I'd like to know if MMS is working.
Also, would you please post which cab you used, since there are several floating around?
Thanks so much!
I have MMS plus threaded SMS working on a stock ATT Tilt ROM.
grizzley said:
I have MMS plus threaded SMS working on a stock ATT Tilt ROM.
Click to expand...
Click to collapse
Hi:
That's great to hear.
By any chance could you help me get it going on my Tilt?
cincy1020 said:
Hi:
That's great to hear.
By any chance could you help me get it going on my Tilt?
Click to expand...
Click to collapse
Get this:
http://rapidshare.com/files/61245824/MMSsetup.zip
Then do this:
http://forum.xda-developers.com/showpost.php?p=1569374&postcount=16
Your MMS will be with your email accounts. Be sure to choose "Cingular" as the default for the MMS once you get it setup. To do that, just go to MMS > Options > Servers > and choose ATT MMS.
grizzley said:
Get this:
http://rapidshare.com/files/61245824/MMSsetup.zip
Then do this:
http://forum.xda-developers.com/showpost.php?p=1569374&postcount=16
Your MMS will be with your email accounts. Be sure to choose "Cingular" as the default for the MMS once you get it setup. To do that, just go to MMS > Options > Servers > and choose ATT MMS.
Click to expand...
Click to collapse
Hi Grizzley:
THANKS SO MUCH!
I had read through so many threads on the subject, that I was a bit overwhelmed, and was nervous to try it out.
Your instructions worked perfectly (at least so far, lol).
Thanks again!
I'm glad it worked. I have been using it for about 2 months and from what I can tell, I have had no problems.
this thread is a little misleading, this is a fix that has been covered way back in the begining, and grizzly pointed to the correct post for that. The reason most chef's used a certain arcsoft version in the cooked roms was so that we could have seperated mms and sms accounts in the default messaging section.
SO just to clarify for people, this is to use palm threaded app with Arcsoft MMS. THIS IS NOT to get the mms portion of the threaded app to work...
shogunmark said:
this thread is a little misleading, this is a fix that has been covered way back in the begining, and grizzly pointed to the correct post for that. The reason most chef's used a certain arcsoft version in the cooked roms was so that we could have seperated mms and sms accounts in the default messaging section.
SO just to clarify for people, this is to use palm threaded app with Arcsoft MMS. THIS IS NOT to get the mms portion of the threaded app to work...
Click to expand...
Click to collapse
Very good point Shogun. I think, at least for me, all the other threads from a long time ago have so much conflicting information. I just wanted to be able to use threaded SMS, but not lose mms completely. There were so many posts made before this one, and yes I read all of them lol, but it just became overwhelming to figure out which cabs were the most recent, what devices were they tested on etc.
But, thanks to this new thread (and Grizzley's help) I was able to find an easy solution to have both threaded sms and mms working.
Thanks
By the way, I am using your threaded sms cab, THANKS for making it
Hi:
This solution is working very well for me. My only problem is that for some reason text in landscape mode is very small (I usually use large font).
Is there any way to set text in landscape mode to stay the same size as in portrait mode?
Thanks!
Sounds great! Can PPCPimBackup keep track of this program? Or is there any other program that can backup sms as fast and easy as PPCPimBackup?
I have the annoying problem of text messages from the future from a specific friend. Will this screw up my usual messaging? It would see that the phone would be smart enough to know a message from the future if one hour off.
Anyway. I'm drunk and posting. Weeee.
I did the WM6.1 upgrade and finally have (most) of my stuff back to normal.
is there a cab out there that makes the tytn ii have threaded sms much like the iphone??
TIA
No. Nothing like that exists.
Have you considered searching? There has to be at least 4000 threads with this same kind of question in it. Search and find the god dam software. And if you want an Iphone, get an Iphone. Or AIDS. Either would be fine
**MOD EDIT**
Have you considered not wasting so much space? The question may have been noobish but the 3miles of space in your post was even more annoying..
Actually, You're obviously simple so I will perform the search for you. Using your exact terms.
Oh look, 5 threads on the first page with the answer.
http://forum.xda-developers.com/showthread.php?t=359903&highlight=threaded+sms
http://forum.xda-developers.com/showthread.php?t=358887&highlight=threaded+sms
http://forum.xda-developers.com/showthread.php?t=355634&highlight=threaded+sms
http://forum.xda-developers.com/showthread.php?t=328860&highlight=threaded+sms
http://forum.xda-developers.com/showthread.php?t=348497&highlight=threaded+sms
Try PocketCM at www.pocketcm.com
Really great SMS replacement and Contacts Manager replacment.
Threaded SMS
I discovered a very reliable threaded SMS client for Pocket PC Phone. It handles both square and rectangular displays. It has some good configuration options for the display and has an excellent popup notification functionality too.
http://www.pocket-sms.com
Downsides are that it only runs on WM 5.0 or better and the license needs to be activated.
Otherwise, a nice simple http://www.pocket-sms.com
Downsides are that it only runs on WM 5.0 or better and the license needs to be activated.
Otherwise, a nice simple application which is not so hot on graphics and presentation but has good functionality/setup opions.
drdingo21 said:
No. Nothing like that exists.
Click to expand...
Click to collapse
Pocket CM with plenty of iPhone skins, and CM Keyboard or I forgot the name, have a keyboard that looks exactly like the iPhone.
And if you want, theres a software which cost money cost extreme text. I just use the Palm SMS Threaded, it works great for me.
Buddy, just do searches, there everywhere.
Does the Palm threaded SMS still break MMS support?
drdingo21 said:
No. Nothing like that exists.
Have you considered searching? There has to be at least 4000 threads with this same kind of question in it. Search and find the god dam software. And if you want an Iphone, get an Iphone. Or AIDS. Either would be fine
Click to expand...
Click to collapse
Bit strong mate, control yourself!
Girvo said:
Does the Palm threaded SMS still break MMS support?
Click to expand...
Click to collapse
Yes, atleast for me and I can't send ANY MMS without getting an OUT OF MEMORY error. Anyone know how to fix this? Back on my old 8525 I never had a problem. I don't care about losing the MMS selection. I just wanna be able to SEND MMS and still have the threaded SMS on my Tilt.
ronfin44 said:
Yes, atleast for me and I can't send ANY MMS without getting an OUT OF MEMORY error. Anyone know how to fix this? Back on my old 8525 I never had a problem. I don't care about losing the MMS selection. I just wanna be able to SEND MMS and still have the threaded SMS on my Tilt.
Click to expand...
Click to collapse
Arcsoft MMS4.2.8.1 FTW
ronfin44 said:
Yes, atleast for me and I can't send ANY MMS without getting an OUT OF MEMORY error. Anyone know how to fix this? Back on my old 8525 I never had a problem. I don't care about losing the MMS selection. I just wanna be able to SEND MMS and still have the threaded SMS on my Tilt.
Click to expand...
Click to collapse
Hi:
I now have Palm threaded sms, and mms working perfectly too.
The instructions I followed are as follow:
Get this:
http://rapidshare.com/files/61245824/MMSsetup.zip
Then do this:
http://forum.xda-developers.com/showpost.php?p=1569374&postcount=16
Your MMS will be with your email accounts. Be sure to choose "Cingular" as the default for the MMS once you get it setup. To do that, just go to MMS > Options > Servers > and choose ATT MMS.[/QUOTE]
I am using this on AT&T Tilt, I am not sure if it will work on other devices, I believe the proxy cab is only for AT&T devices. You can probably find more info on it if you read through the original post ^^.
Anyway, I hope this helps.
just wait for WM 6.1, includes threaded sms support......i believe it has already leaked and dutty is on his way to releasing a rom for it soon. (a beta is already avail for download)
ok, so I tried SMS chat, and it's nice, but there are a few flaws that I am not sure of, I also heard that TEXTr is a little too buggy for its own good.
anyone know of a good app that will give me a chat type app. I tried a wile ago the Palm extracted version, but the MMS stopped working for some reason.
any ideas, is there an update to the Palm app, is there something else out there that someone recommends?
PocketCM at PocketCM.com is good. I use SMS-Chat by VITO personally, and I love it. The Palm App you can get fixes for so that you can get MMS working, if you do a few minutes of searching on the forums.
I have tried quite a few of these and have found SMS Chat is still tops. Only flaw is no quick search fuction.
I have tried quite a few of these and have found SMS Chat is still tops. Only flaw is no quick search function.
I was having problems with my MMS but I think I will try SMS Chat until they get some of those bugs worked our. Thanks for the info.
I found that when using sms chat, touchpal back space to delete word not working. Anyone else experiencing this?
Just follow these steps
http://forum.xda-developers.com/showpost.php?p=1815112&postcount=6
I found this small application called threader available at http://www.pocketpcfreewares.com/
very simple but seems to work well on my HTC Kaiser
Am I missing something?
Am I missing something here? Why do you need other threaded-SMS app when it's already built-in in WM6.1?
emy_77 said:
Am I missing something here? Why do you need other threaded-SMS app when it's already built-in in WM6.1?
Click to expand...
Click to collapse
Do you have WM6.1 on your Kaiser?
emy_77 said:
Am I missing something here? Why do you need other threaded-SMS app when it's already built-in in WM6.1?
Click to expand...
Click to collapse
I guess I dont know how to activate this feature because I dont seem to have it, if you know the trick to make it work it would be sweet because I cant find it
Firefly, did you back up your sms with PIM Back up and the restored them in the 6.1 rom?
if you did thats why you dont have threaded sms. it seems to be that when sms messages are restored n 6.1, it throws off the threaded sms feature.
Is there a way to close a threaded message or split it into its own thread?
Been having the same "conversation" for a week with the girlfriend and there is no relevence between one message and another.
Do you need Windows Vista to install WM6.1?
I don't have WM 6.1 but the latest WM6 update from HTC for my at&t TILT. It's stable but no threaded SMS app Can you install and flash to WM 6.1 or do you need to do it with a computer running Vista only? Is the SMS superior in WM 6.1? I use SMS daily to communicate and SMS Chat is the only app that has worked for me reliably. Yes the backspace button sometimes does not work and there is no emoticon support but unless you all have another option its sms chat or wm 6.1.
smjoshi said:
I found this small application called threader available at http://www.pocketpcfreewares.com/
very simple but seems to work well on my HTC Kaiser
Click to expand...
Click to collapse
SMS Threader doesn't seem to be availalble from here anymore.
Do you have the cab for it?
I use one of Duttys wm6.1 roms and the threaded sms rocks my socks off
rameses said:
SMS Threader doesn't seem to be availalble from here anymore.
Do you have the cab for it?
Click to expand...
Click to collapse
Yes here it is -
the sms in 6.1 rocks my socks...thats one of the main reasons why i flashed to 6.1 but in 6.0 i was using vito sms chat which worked quite well for me but i wanted it to be built in and not an external program
I'm quite happy with PocketCM. The new version integrates better between contacts and SMS and Phone better, too.
smjoshi said:
Yes here it is -
Click to expand...
Click to collapse
Cheers, I'll give it a try.
Does anyone have this Running and working properly on there Fuze/Pro ? ?
I like this app alot better then MS threaded Messaging. When I install the Palm threaded SMS/MMS app I can txt fine with no Problem, but when I try to send an MMS I get "not enough Memory..." even though I dont have anything else running. I have even gone to the extent to install a ROM with no Manilla or Titanium and Still I get the ssame result....Can anyone help me with this ?
Cab for Palm Threaded SMS/MMS
Related Palm threaded SMS/MMS Thread
Please help
there is no solution for this
oh well I guess I"d just have to leave the Past in the Past... Thanx for the answer...
hmmm i tried this didnt really like it tho. anyone know if there are any other threaded sms cabs to change the look and wut not?