Related
:? Hi guys Just wondered if any of you guys are experienced problems with the Jabra bt800 working intermittently. Sometimes it works but most of the time it does'nt . I've upgraded to Broadcom 3900 and although blue tooth audio still crackles its not as bad.. The headset works alot better with my SPV C500.. Any ideas or experiences :?:
bt 800
hi i have xda2s with bt 800 working somtimes
i upgradeed to bt3900 but i see no change
somtime i takes 5-6 kye presss to unswerr a phone call
i do not have any audio problem the audio is ok
glad to know i am not the only one.. cheers for replying
did you try to contact jabra support???
I have a contact in GN Netcom so will have a chat with him next week and post the response here
thenks :wink:
:? Ok after talking to my contact in GN Netcom we have come to the conclusion (seings as it works fine with my Motorolla V3 and Nokia 6810 and 6820 and Siemens SK65) that the issue lies with the Bluetooth stack on my 2s.I did explain about this that i had upgraded it to the newer version and i personally believe they have not totally replicated the way the Bluetooth in the xda2s behaves the same as a normal bluetooth enabled phones.
I believe that because it works fine on most of the Manufacturers phones and the XDA's of this world are low priority to get it right.. I still believe it will be fixed in future Bluetooth upgrades on the xda2s.. doh still think that even though the display and buttons work intermittently it is still worth having for the DSP
The problem still exists!
I have Qrek 9090 and Jabra t800. Audio is very good and also on the good range.
BUT...
Main problem (even with Jabra 800 fix CAB file) is that I can't normaly answer the phone call. It takes about 5 or 6 times before I can reply the call. And also, it takes about 2 seconds before I can hear other side opponent.
I just wonder if you people have some kind of this problem. Any expirince. Could you please share with me some information.
I use Danghard rom 1.44 wit BT 3900.
Thanks a lot.
Leonid.
Update to Latest Ow2 ROM...the BT 3900 workd flaw lewssly.I hv tried BT with SE HBH 30/262 etc Blue Trek G2 and no problems....Also with Motorolla 810...
Moreover, Motorolla and Bluetrek supports voice dialing too :lol:
Thank you, but I'm talking about Jabra BT 800, cause it has so many features that I need. So, I would like that my Jabra headset will work fine with Qtek 9090.
Guys, please help! :lol:
Guys! Really need your help.
I used before another headset and didn't have any problems. But after I bought Jabra BT 800 I got serous problems. It really takes about 6 rings before I can answer a call. So, a lot of people just hang up and I have to call them back. :evil:
Nothing really helped. :evil:
I'm confused, cause I really like this headset and would like to use it.
HELP!
:lol:
Thanks!
hdubli said:
Update to Latest Ow2 ROM...the BT 3900 workd flaw lewssly.I hv tried BT with SE HBH 30/262 etc Blue Trek G2 and no problems....Also with Motorolla 810...
Moreover, Motorolla and Bluetrek supports voice dialing too :lol:
Click to expand...
Click to collapse
Voicedialing? How?
I have a HS810, it works fine, but how do you have voicedialing with it?
Moreover, Motorolla and Bluetrek supports voice dialing too
Voicedialing? How?
I have a HS810, it works fine, but how do you have voicedialing with it?
well I too own a Bluetreck G2R and a lot of crackling sound I have upgraded my BT stack to 3900 and most of my callers only hear the crackling so I have to swap my call to the phone and talk or have to call them back
also how do u use Voice dailing on the bluetreck for my xda IIs ???
can some one help me ?
Hi..use search,,,still this is how to do a voice dialling:
1) Install MS Voice command and assign a Hardware button(any) to activate the software so that it an listen to our commands.
2) Now, just press the "Call answer" button of your BT.By doing so it will activate the sound on your 2s.Then press that harware button of Voice command and speak...
It works flawlessly
Thanks
thank s
Ill def try going to Delhi, will return and sure thry Voice dial and re-install my BT stack to see if there is crackling sound still there
also how long can you try to distance your phone from the BT
I got one Jabra bt800
its superb and must say its a best one around with lots of features
Eehheh and you call that voice dialing?
If i had to do all of that to voice dial i could also press the button on the device and talk the name to it. And that would be one click less than with your solution.
I think the idea of voice dial with bluetooth is to keep the phone in your pocket and do the talking via bluetooth only.
hdubli said:
Hi..use search,,,still this is how to do a voice dialling:
1) Install MS Voice command and assign a Hardware button(any) to activate the software so that it an listen to our commands.
2) Now, just press the "Call answer" button of your BT.By doing so it will activate the sound on your 2s.Then press that harware button of Voice command and speak...
It works flawlessly
Click to expand...
Click to collapse
Re: Thanks
spread_smiles said:
thank s
Ill def try going to Delhi, will return and sure thry Voice dial and re-install my BT stack to see if there is crackling sound still there
also how long can you try to distance your phone from the BT
I got one Jabra bt800
its superb and must say its a best one around with lots of features
Click to expand...
Click to collapse
But can you tell me. Do you also have such problems with Jabra 800 as I have. The sound of BT and range is best. But what about time to answer the call. I press answer button hundred times to be able to speake with opponent.
Hi again guys.
Still can't solve my problem with BT 800.
I contacted with several companies but didn't get any correct answer.
Really don't know what to do.
Can you please tell what exactly this CAB file from FTP fixes cause nothig changed since I installed it.
Thank you and please foget me for bothering you.
Leo.
Gentlemen,
After a week or so exploring this forum and experimenting with my Logitech bluetooth hands free I've got a feeling that the only possible solution for the moment is to prevent the BA from getting into the sleep mode. Use ScreenLock or Mort Saver instead.
Solid_Lynx said:
Gentlemen,
After a week or so exploring this forum and experimenting with my Logitech bluetooth hands free I've got a feeling that the only possible solution for the moment is to prevent the BA from getting into the sleep mode. Use ScreenLock or Mort Saver instead.
Click to expand...
Click to collapse
Well, thank you.
But as I understood from different threads in forum this is one way.
But... I'll kill battery of PDA very quickly. Really don't think that it's a good idea.
People from Jabra told me that new firmware will come soon and will help to solve this problem.
So.. I think that it's not the fault of PDA or ROM... :?
HI , I have XDA IIi ( PH10C), I got it new form ebay couple a days ago, But I am having a problem with echo the other caller gets echo even if my speakerphone is off.
Does anybody know how to fix it ? Please hepl.
ROM version: 1.10.00 WWE
ROME date : 12/24/04
Radio version: 1.00.00
Protocol version 1337.39
P.S. I am new to all these, but I willing to learn, any help would be appreciated.
Thank you
Does it echo everytime ? Do you have an SD card inserted all the time ? try taking the SD card out while your on a call.
If this dont work....
Try an upgrade to the latest ROM, read the first 3 pages of this thread http://forum.xda-developers.com/viewtopic.php?t=25801 and use "Pug"s ROM as it has the newer Radio ROM version.
Danny-B- said:
Does it echo everytime ? Do you have an SD card inserted all the time ? try taking the SD card out while your on a call.
If this dont work....
Try an upgrade to the latest ROM, read the first 3 pages of this thread http://forum.xda-developers.com/viewtopic.php?t=25801 and use "Pug"s ROM as it has the newer Radio ROM version.
Click to expand...
Click to collapse
I have echo doest matter if I have an SD card inserted. I will try to upgrade ROM then.
Thank you.
Ok guys I annoyed the hell out of I-mate for months now about my Alpine that echo’s bad in my car kit (same car kit works great with Himalaya)
I can't even talk to another alpine with car kit as the echo gets stuck in a loop.
They sent me this cab file that they say will fix my problem.
Guess what it fixed nothing!
Maybe some others can try it.
Can some one who knows enough have a look in the Cab and tell me what it does if anything or maybe improve on it so it does work.
I hope it can help someone!
Let me know if it does or does not!
Regards Emm
I had exactly the same problem... Until I installed PhoneAlarm and set up one of the profiles for handsfree operation.
No more echo!
Go to: http://www.pocketmax.net/phonealarm.htm
Thanks SiBorg I will give it a try.
Can't see handsfree operation only headset. :?
Emm
emm said:
Thanks SiBorg I will give it a try.
Can't see handsfree operation only headset. :?
Emm
Click to expand...
Click to collapse
Sorry... Headset is what I meant. :?
Within the profile you decide to use for Bluetooth headset operation, ensure Radio Settings are as follows:
Activate Radio On (Turns phone on)
Activate IR Off (Unless you need InfraRed, of course!)
Bluetooth On (Obvious, really!)
Headset On (Seems to ensure that the external mic is turned off)
Activate WLAN Off (Again... unless you need it on)
What is your fave skin for phoneAlarm? I use Tinny-Blue, because it blends in well with the Windows Default Today screen in Windows Mobile 2003SE.
Hope this has solved your problem. Otherwise, forget Bluetooth headsets and go for the stock wired handsfree. At least it lets you use VoiceCommand properly! :wink:
The wired handsfree car kit is what I am using.
Thats what the echo is with.
I dont have bluetooth headset.
MS Voice command works well.
Using Tinny-Blue same reason it fits in with background.
Regards,
Emm
emm said:
The wired handsfree car kit is what I am using.
Thats what the echo is with.
I dont have bluetooth headset.
MS Voice command works well.
Using Tinny-Blue same reason it fits in with background.
Regards,
Emm
Click to expand...
Click to collapse
Sorry, Emm... Didn't realise.
To make up for my ignorance, I tested the phoneAlarm headset option using my own wired handsfree - using an extremely scientific method: the conclusion being that my wife told me that I sounded like I had my head in a bucket under the normal profile (no headset option), but much better with the Car profile (headset option enabled).
So... there you have it!
BA WM5 Broadcom 1.7.1 Build 3400 Stack (Test)
This is just some test of mine to hv option with BT stack (MS/Broadcom), I only spend the last 3 hour workin on this little project, so it really possible if anything is missing or I forgotin something (its happens to me right?..lol), but I've test it and it work like it should (With My v1.3 ROM), I dont know if this test hv a bug. maybe we can test it, especially A2DP and stabilty issues with this test.
Tested operation:
1. Activesync
2. Send/Recieve File
3. Headset via computer
4. Network Access
5. BT Serial Port
6. Dial-up Networking
Known Issue:
U tell me, not tested so much.
Instalation:
1. Install the HELMI_BA_WM5_BT1.7_TEST.CAB then soft reset
Uninstall (note the step its really neccesary, or u'll endup mess with ur phone):
1. Install Enable_MS_BT_.CAB
2. Delete registry value (or the folder)
[HKEY_LOCAL_MACHINE\SOFTWARE\WIDCOMM]
and delete "Redirect" key on:
[HKEY_LOCAL_MACHINE\ControlPanel\Bluetooth]
"Redirect"="BTConnManagerCE.exe"
3. Reset
4. Uninstall HELMI_BA_WM5_BT1.7_TEST.
5. Delete file from \Temp dir
EDIT:
I forgot to mention, after u run ENABLE_MS_BT.CAB the Broadcomm/Widcomm file will be move to \Temp folder so u can delete it safely...
Dont expect to be perfect on this release, cos its only on earlier stage, to early, hopes someone might help for improvement, and workin together with me, and I hopes some1 can make a better Install/Uninstall process.
Dont install/try if u dont know what ur doin, and backup your data is a must.
Input is always welcome. cos I believe there's still much things to do.
Thanks for http://www.aximsite.com site and everybody there for the BT file.
http://www.aximsite.com/boards/showthread.php?t=122247
and also thanks -=xXx=- for the info where to find it. thanks man.
Helmi
gonna test it now helmi_c
thanks
Just intalled. The stereo works fine! Great quality for me! The hands free seems to be a bit tempremental. Worked once and then stopped afet receiving one call.. WIll try it out again..It looks like am stuck with an either. One observation: with the ms stack, there was a headphoen icon while using the phone. is absent here...wonder if that was a ms stack function?
deepak
helmi_c,
hmm weird, after i installed the new wildcom stack, my pda cant see my headset anymore.
still testing though.
wish me luck.
imatrix
I believe u guys both hv problem with MS Stack, hopes this stack will help for who having problem with MS Stack, but remember this is just some sort test, maybe still need a lot of improvement. but its seems work good with deepakr who hv problem with MS, imatrix hopes u'll hv the same result like he does. good luck.
btw In the rar there's a BTspeed cab, it might help for some headset, post on the Axim forum sites... there's also another app for controlin power if i'm not mistaken, I'll post when i get back.
A little note, this stack sometimes wakeup if gsm signal is lost/found, if the signal of gsm is good, it shouldnt happen (theoriticaly speaking..lol..).
helmi_c
Firstly great to see BT restarting automatically after handset is switched on from standby mode. After some fooling around I was able to set up activesync and it worked like a charm (useful for me especially since USB activesync does not work)
Couple of problems I faced
1. Turning off and restarting BT gave me a unable to load driver due to insufficient memory error. When I stopped my activesync, outlook and contacts and tried again it started successfully.
2. I was unable to find the DUN service and my PC did not recognize a DUN service either - am I looking/not looking at the right place?
Thanks and highly appreciate your prolific contribution
-AKC
Hi Hemli
I have just installed this a minute ago,
Ill report back in a few hours with my experiances with this.
Hopefully it will be better than M$ BT stack with stereo headsets.
I've upload a patch that contain a newer BTCeIf.dll (1.7 the original was 1.6) and HTC_PCM_Routing.dll taken from htc device. well... in my device I dont hv problem with memory issues, even without this patch.. I dont know for sure, cos i dont test it much...currently test workin Simultaniously is BTSYnc, SerialPort 1 in 1 out, and Audio Gateway. and its still work fine.
btw please post comment here, and also what rom u currently use. Otw now, just come to trow the patch..
bro helmi,
Sorry if i asking you stupid question.
Can this file install/working with WM2003SE ?
THX
hi..
hi have instal this, and find some issues
1- if i turn on bt the wifi dont work..
2- if i turn on wifi, the bt give the memory error
afther use 1 off the things (bt our wifi) need a soft reset to work the other
Riddler said:
bro helmi,
Sorry if i asking you stupid question.
Can this file install/working with WM2003SE ?
THX
Click to expand...
Click to collapse
No, it does not work on WM2003SE, I installed it and I had to hard re-set my Imate, it works only under Wondows 2005!!
Any way I gave it a try and I had to hard reset my PDA any way!!
Helmi, I just wanted to confirm, that Dial-Up with 2nd phone works fine. Tested also BT stereo headphones from HP (A2DP with additional profile for controlling playing - skipping to the next track and pause) - So far works as only BT implementation in BA allows: on close distance and not doing much in backgroud works fine.
Another happy user of your Firmware and other tools for BA!
Later on I will test GPS on BT, but do not expect any problems.
One small detail is left from old BT stack: while creating a connection you can still choose connection using "Bluetooth" that refers to M$ stack (selecting it reports hardware error - not rreally suprising
helmi_c said:
I've upload a patch that contain a newer BTCeIf.dll (1.7 the original was 1.6) and HTC_PCM_Routing.dll taken from htc device. well... in my device I dont hv problem with memory issues, even without this patch.. I dont know for sure, cos i dont test it much...currently test workin Simultaniously is BTSYnc, SerialPort 1 in 1 out, and Audio Gateway. and its still work fine.
btw please post comment here, and also what rom u currently use. Otw now, just come to trow the patch..
Click to expand...
Click to collapse
Aha! The patch helped! I now have a fully functional headset, stereo on the headphones and a great speedy and stable ROM. Makes me one happy camper. Looks like now I can go ahead and finally configure this with all my apps. Thanks helmi
NO HANDSFREE PROFILE
Hi
nice integration and thanks but i went back to ms as my sony ericson hcb-700 wll not pair for some reason after looks like the handsfree profile is not working
The Audio stream is great with this BT solution !
But when I connect to my parrot ck3300 carkit, It opens the connection like there is a tel.call active. when i press the hangup button on my carkit the BT connection is gone.
So it seems it is connected as headset and not as handsfree phone,
One other thing, when I connect to my BT Sony Ericsson HbH ds970 stereo headset I cannot shut off the screen in tcpmp player ???
(I think this also happened with th MS stack)
any solution for this ?
Last test (with my clean AKU3.2 v1.3) with BroadcommPatch1 applied and no overclock:
Turn on/off 4 times and reconnect below service (get bored to turn on/off and play with it again):
currently active BT service at the same time is:
1. Activesync / Bluetooth serial Out (syncing)
2. Network Acces/ Bluetooth Networking
3. Audio Gateway / Calling my mobile operator and stream audio to my pc as headset
4. Send/Recieve file from pc and from pda
5. Bluetooth serial In
and currently active application (leave as background procces I dont close it):
1. Activesync (Syncing)
2. Calendar
3. Contact (580 contact display)
4. Excel Mobile opening 185kb file
5. Album
6. Word Mobile opening 220kb file (little bit slow on opening)
7. Powerpoint Mobile opening 350kb file till end slide
8. Notes
9. Task
10. Bluetooth Manager
11. File Explorer
12. Calculator.
lastly...activate Wifi...wifi detecting & connect to neighbor network... turn off wifi...activated again...detecting & connect to neighbor network again...
but I dont test the GPS (serial port) or A2DP stuff since i dont hv it.
turn off bt...turn on again...reconnect the above BT service...do this 4 times.. still no memory issues. well maybe I'm just bein lucky... but the battery is drain more faster with this test, maybe because this is somekind of stress testing.
so far this Broadcomm stack still running well...the sound from Audiogateway while this test active is still ok, but if the gsm signal is bad, the sound is bad also, so its not bt problem its a gsm problem. btw the ShutXP Icon on the tray is GONE..thats weird.., that the only issue I hv..
btw does anyone know where to find a PC Widcomm/Broadcomm driver that support A2DP, I dont remember where to find it. My PC Widcomm driver version is v1.4.2 Build 12, quite old, I want to test the a2dp profile.
btw if u play with:
[HKEY_LOCAL_MACHINE\Software\WIDCOMM\Plugin\HandsFree]
"SupportedFeatures"=dword:37 (default doesnt exist)
"ServiceMask"=dword:1
"AudioSetupDll"="\windows\HTC_PCM_Routing.dll" (default MkSpk_PCM_Routing.dll need to play with this and see what more widely support device)
"AudioPreferences"=dword:2
"AudioHandling"=dword:13 (default 8 )
there's a Icon if headset is activated. but its seems unstable in my device, try it.
bigsteve said:
Hi Hemli
I have just installed this a minute ago,
Ill report back in a few hours with my experiances with this.
Hopefully it will be better than M$ BT stack with stereo headsets.
Click to expand...
Click to collapse
Waitin for ur input...
jakubd said:
Helmi, I just wanted to confirm, that Dial-Up with 2nd phone works fine. Tested also BT stereo headphones from HP (A2DP with additional profile for controlling playing - skipping to the next track and pause) - So far works as only BT implementation in BA allows: on close distance and not doing much in backgroud works fine.
Another happy user of your Firmware and other tools for BA!
Later on I will test GPS on BT, but do not expect any problems.
One small detail is left from old BT stack: while creating a connection you can still choose connection using "Bluetooth" that refers to M$ stack (selecting it reports hardware error - not rreally suprising
Click to expand...
Click to collapse
oops... well, maybe its a little bit tricky to strip out completely the old stack, but I'll try learn this... or any input is more then welcome
deepakr said:
Aha! The patch helped! I now have a fully functional headset, stereo on the headphones and a great speedy and stable ROM. Makes me one happy camper. Looks like now I can go ahead and finally configure this with all my apps. Thanks helmi
Click to expand...
Click to collapse
Good to hear that deepakr, Btw I imatrix what u status man? is it workin with u (the patch)? if u still hv a static noise issues, try to delete the shortcut on the BTManager and re-create the Audiogateway Shortcut.
hey helmi_c,
Good to hear that deepakr, Btw I imatrix what u status man? is it workin with u (the patch)? if u still hv a static noise issues, try to delete the shortcut on the BTManager and re-create the Audiogateway Shortcut
Click to expand...
Click to collapse
yep still have the static noise, will try your method later.
been bz this few days, i did not test much. I will play around with it tomorrow.
thanks.
imatrix
Thanks Helmi, great job!
A2DP works nicely, but now i get the same opposite as compared to microsoft stack. my A2DP is perfect whereas any calls that come in ring through the hedset, but i can't pick the calls up / talk through the bluetooth headset. weird uh?
Anyone hit the same problem?
I have no problems with static, just some slowdowns due to processor usage and i can't toggle the screen in WM or using display switch.
Great Job though!
edit:
maybe its because i'm connected as both headset and high quality audio? going to try connect as hands free and HQA.
edit 2:
can't for the life of me find out how to pair it in handsfree mode! Any pointers?
First of all, I want to give a special thanks to itje for his worderful work making BEST rom for everyone.
I am using Touch-IT wm6.1 Black version but I have question with bluetooth headset setup activating A2DP. I have been searching all the posts and tried many things to my Wing and my bluetooth device (Samsung WEP200) but didn't help either didn't work any of them. How can I use my headset not just answering calls also listen to music & movie? Please help me..
choodyessas said:
First of all, I want to give a special thanks to itje for his worderful work making BEST rom for everyone.
I am using Touch-IT wm6.1 Black version but I have question with bluetooth headset setup activating A2DP. I have been searching all the posts and tried many things to my Wing and my bluetooth device (Samsung WEP200) but didn't help either didn't work any of them. How can I use my headset not just answering calls also listen to music & movie? Please help me..
Click to expand...
Click to collapse
Papamopps was asking this same question to me the other day....
I am trying to fix this one just keep coming back everyday for new posts.
Unless somebody else allready found the fix. Post this here. Thanks
mhhhh i will have a look at it....
... because after ayerthons workout for standy music.....
.... i bought a headset and 4gb sdhc card.
we´ll find a way for a2dp to work....
As I found in other threads and devices - try to use HTweakC for a2dp problems.
I also PM ithe that some cooks take 2 files from old ROM WM6 and replace the new files on WM6.1 with them - did teh trick for some...
or try this fix:
http://forum.xda-developers.com/showpost.php?p=1066713&postcount=1
Not sure if this is your problem or not, but to get music, GPS prompts, etc. from my Wing to my mono Bluetooth headset (Jabra250V), I used a utility called btaudio. Not sure at the moment where exactly it is located, I've seen it both as a .zip and a .cab file. A quick search should locate it along with more information.
choodyessas said:
First of all, I want to give a special thanks to itje for his worderful work making BEST rom for everyone.
I am using Touch-IT wm6.1 Black version but I have question with bluetooth headset setup activating A2DP. I have been searching all the posts and tried many things to my Wing and my bluetooth device (Samsung WEP200) but didn't help either didn't work any of them. How can I use my headset not just answering calls also listen to music & movie? Please help me..
Click to expand...
Click to collapse
hmm but wep200 is just not compatible with a2dp.. to use it to listen music you may use bluemusic, bt toggle or bt audio toggle (and im think there is a few more programs) but the quality is (i couldnt find a word) awful.
i didnt try a2dp on itje's roms but it works "out of box" on opentouch 3.0(same build) and pdaviet 6.1
im using motorola ht820 headset which ofcourse support a2dp.
marty123 said:
Not sure if this is your problem or not, but to get music, GPS prompts, etc. from my Wing to my mono Bluetooth headset (Jabra250V), I used a utility called btaudio. Not sure at the moment where exactly it is located, I've seen it both as a .zip and a .cab file. A quick search should locate it along with more information.
Click to expand...
Click to collapse
yes for mono ofcourse
BUT we are searching for the ability of using the built in A2DP - that is stereo sound and can only be used by stereoheadset...
thanks
papamopps said:
yes for mono ofcourse
BUT we are searching for the ability of using the built in A2DP - that is stereo sound and can only be used by stereoheadset...
thanks
Click to expand...
Click to collapse
I don't believe the title of this thread accurately describes the poster's problem, hence there are two trains of thought on the solution. The A2DP in Touch-IT wm6.1 Black is one issue, the other being getting the WEP200 headset to work with audio other than phone calls. As slimag posted, his headset is not compatible with A2DP, so any work along those lines will most likely NOT help choodyessas. I choose to try and help with their underlaying question.
choodyessas said:
First of all, I want to give a special thanks to itje for his worderful work making BEST rom for everyone.
I am using Touch-IT wm6.1 Black version but I have question with bluetooth headset setup activating A2DP. I have been searching all the posts and tried many things to my Wing and my bluetooth device (Samsung WEP200) but didn't help either didn't work any of them. How can I use my headset not just answering calls also listen to music & movie? Please help me..
Click to expand...
Click to collapse
Sorry if I confused you guys
marty123 said:
I don't believe the title of this thread accurately describes the poster's problem, hence there are two trains of thought on the solution. The A2DP in Touch-IT wm6.1 Black is one issue, the other being getting the WEP200 headset to work with audio other than phone calls. As slimag posted, his headset is not compatible with A2DP, so any work along those lines will most likely NOT help choodyessas. I choose to try and help with their underlaying question.
Click to expand...
Click to collapse
Sorry if I confused you guys but I believe my headset WEP200 works with A2DP because I tried on Open Touch wm6.1. I didn't set A2DP tho... I am not sure if the ROM cooked with it but it worked. The real problem is that I can not use Open Touch because my wing freezes ALL the time.. so I'm more into itje's ROMs..
So uhm.. sorry for not responding to the original TS - but am I to understand that there are bluetooth stereo issues with the 6.1 WM roms?
I bought a sony ericsson ds980 stereo bluetooth headset the other day. My phone is currently being repaired by HTC (at least, I hope it is) - I intend to flash Itje's latest wm6.1 ROM to it the second I have my mighty Herald returned to me.
But... WM6.1 doesn't work well with Stereo Bluetooth you say? Even with the suggested fixes in the posts above?
out of curiousity does anyone know the params that Battery status uses to launch A2DP? i want to make a shortcut, the tray launch is hard to hit sometimes,
and thanks for the fix
mapleman321 said:
out of curiousity does anyone know the params that Battery status uses to launch A2DP? i want to make a shortcut, the tray launch is hard to hit sometimes,
and thanks for the fix
Click to expand...
Click to collapse
which fix?
I only said let´s try this fix. I´ll get my headset during this week and i will try it.....
mapleman321 said:
out of curiousity does anyone know the params that Battery status uses to launch A2DP? i want to make a shortcut, the tray launch is hard to hit sometimes,
and thanks for the fix
Click to expand...
Click to collapse
try a2dptoggle (found on this forum) - it has todayplugin but can be used without it as a shortcut.
slimag said:
try a2dptoggle (found on this forum) - it has todayplugin but can be used without it as a shortcut.
Click to expand...
Click to collapse
here you go.....
NO probleme here.
Just got my Motorolla S9 (40€) paired it and started music with Audiomanager.
... pairing = no problem
... skipping music = no problem
... doing a call = no problem!
Great.... adn with the music in standby PERFECT!!!
Great.
Damn . i have to sent my XDA to service because of a LCD demage...
Now as I found the perfect setting....
Hahahahahaha
Indoor I can even go out of the room. And if I loose connection .... it pairs automaticly again when inside of range...
Great
papamopps said:
NO probleme here.
Just got my Motorolla S9 (40€) paired it and started music with Audiomanager.
... pairing = no problem
... skipping music = no problem
... doing a call = no problem!
Great.... adn with the music in standby PERFECT!!!
Great.
Damn . i have to sent my XDA to service because of a LCD demage...
Now as I found the perfect setting....
Hahahahahaha
Indoor I can even go out of the room. And if I loose connection .... it pairs automaticly again when inside of range...
Great
Click to expand...
Click to collapse
Awsome to hear this..Now I am going to stop my research. And start searching for another great TWEAK
And i think i'm going to buy a headset to
Hi there.
I have a HTC SHIFT (x9500) with
ROM version = 1.0.7 ROMeO_S WWE
RADIO Version = 1.27.35.28
And i have a problem that bluetooth dosn´t work
Its like no bluetooth are installed in the phone
In COMM MANAGER theres only = Phone on/off - Flight mode - Active sync, but i can only choose phone on/off or flight mode.
Can i install a bluetooth (anything) and make it work ? (Just for bluetooth headset, and thats all)
Or is there a ROM with it all you can recommend ?
I only want to change the phone section --- The computersection is running fine with W7
Really hope someone can help me (and maybee give a link to "how to install it")
Thanks
Unfortunately bluetooth, wireless and SD card are not working on the Windows Mobile side of the Shift, only on the Vista side. And there is no publicly known cure for that. Sorry to disappoint you.
axelTP2 said:
Unfortunately bluetooth, wireless and SD card are not working on the Windows Mobile side of the Shift, only on the Vista side. And there is no publicly known cure for that. Sorry to disappoint you.
Click to expand...
Click to collapse
Thats ok.... I was just hoping that a bluetooth headset could solve my problem, here --->>>
My problem is that when i use headset (incl mic), no one can here me when i talk into the headset
When i disconnect the headset, the build in mic is working fine
I have tried with 3 headsets and the pin connection are ok, and the headsets working fine with other phones.
The problem is that when i connect a headset or headphones, the build in mic is disconnected.
If i try the headset(s) in the computersection, the mic is working fine.
And if i set the mic to (Listen to this), in the computersections soundoptions, i can here myself in the headset.
Maybe its the ROM to the phone theres no good ?
Cujox7500 said:
My problem is that when i use headset (incl mic), no one can here me when i talk into the headset.
When i disconnect the headset, the build in mic is working fine.
Maybe its the ROM to the phone theres no good ?
Click to expand...
Click to collapse
This is a known problem of the Shift, there is nothing wrong with your headset or your ROM version. Until somebody will find a cure for that (if ever....), you'll have to live with it.
axelTP2 said:
This is a known problem of the Shift, there is nothing wrong with your headset or your ROM version. Until somebody will find a cure for that (if ever....), you'll have to live with it.
Click to expand...
Click to collapse
Ok.... bad luck
But maybe you can help me how to setup MMS ?
I can sent and receive SMS, but i dont know how to set the phone up to sent and receive MMS´s
Cujox7500 said:
But maybe you can help me how to setup MMS ?
Click to expand...
Click to collapse
Hi Cujox7500!
Sorry, I only used my Shift as a phone for a couple of times out of curiosity.
To send MMS you should look for the settings your GSM operator is recommending, check on its website. Or maybe it could send the settings automatically via SMS.
bluetooth for htc x9500
Hello Guys
Nobody has yet solved for bloutooth in SnapVUE X9500?