i have a cingular 8125
Ipl 2.26
spl 2.26
i was upgrading my rom and it stopped at 36% and now it is stuck in bootloader mode. i have tried to load other roms however it will not. it sounds like its connected but when i run a rom it says its not connected. i have tried many times and i do not know what to do! please someone help me!!
NVM i got it to work!! the problem was a soft reset that i did not do before hand!! i cant believe it was such a simple mistake!
Related
hello, everybody, i just upgraded my O2 XDA MINI S with AKU 3.2, it stopped at 99%.
Now, my phone cannot start up, cannot connect with PC at all.
Please do help. thank you very much
you must install a rom with bootloader 1.x eg.(buttons 1.05 rom)first then a rom with bootloader 2.x eg.(molski 30mb rom) then you can install a AKU3.2 rom.
this solved my 99% hang and i am 99% sure it will solve it for you. please reply if it works.
could you please tell me how to install a rom with bootloader 1.x eg.(buttons 1.05 rom)?
my phone cannot connect with the PC at the moment.
Many thanks for your help
if you waited to long during the hang and the battery drained then i think you might have a brick if not soft reset and install buttons rom
it it is in bootloader mode then the rom installer will connect to the device
thank you very much, where i can find a 'buttons rom'. Really sorry to trouble you, i am not familar with upgrading at all.
my phone cannot start, after reset, it shows IPL and SPL, then reset itself again and again.
What i can do if it can not connect with my PC?
liuyin430 said:
my phone cannot start, after reset, it shows IPL and SPL, then reset itself again and again.
What i can do if it can not connect with my PC?
Click to expand...
Click to collapse
Before anyone can REALLY help you you need to post a little more info.
What IPL/SPL Versions are currently on your device.
Do you know if you have a G3 or G4 flashchip?
IPL/SPL 1.05
G3
the problem is it cannot boot at all.
thanks every body.
Hi all!
I´ve just got a friend´s kjam to replace its ROM and unfortunately, I came up with the following odd behaviour! See if one of you can solve it!
After a 1.05 button ROM flash (CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE), it appears:
IPL 1.01
SPL 1.01.000
GSM 1.12.10.0
OS 1.5.4.2
I´ve already done this process many times including mine device G3 without any hard issues. I know that SPL with xxx seems to be a G4, but initially wasn't. The button ROM should have upgraded to 1.05 as expected and not 1.01. This version turns Wizard to work unstable.
The problem arises when trying to load Boot loader! Nothing happens! No mode at all! I still boot on this version but can´t reflash it to another newer ROM out there. I also tried the official ROM from Imate without luck as well.
Not even a hold camera process works.
Any idea or workaround on how to get back the boot loader mode?
I really appreciate any comments!
Thanks in advance.
I was upgrading my t-mobile 8150(?) the k-jam with the new windows mobile 6 and in the middle of it my comp crashed!! now i am stuck at the bootloader mode (3 colored screen) and when i try to redo it i get to 99% and get a 302 error message. i follow the instructions given but keeps going in circles. its a G3 so is my phone bricked or is there a way to save it? i've been looking at this site all day but am now just more confused. lol thanks for your help!
No your phone isn't bricked. As long as you can get into the bootloader screen you should be ok. What you need to do is flash an official carrier rom either tmobile 2.26 or wizard love rom after you that than you can reflash to wm6. look at the stickies in the wizard forums that is where you can find these roms.
Thanks for the info but seems my techno curse continues. I tried the wizard love rom but it was in a different language and whem i tried the tmobile 2.26 i got "error 274 connection." Any more suggestions? Again thanks soo much for an issue I'm sure has been posted here a thouand times.
This happens to me all the time. I always use the Cingular 2.25 rom, it works perfectly and I have an I-mate K-JAM. Then, do the WM6 upgrade, but ensure all of your Norton and Antivirus and background running apps are shut down. Good luck.
yes also take out your mini sd card if you have one. even though its in another language it will work. "AVANTI means next. so just keep hitting that and you will be fine.
hmm been trying to d/l the Cingular 2.25 rom but the link seems to have stoped working...
It;s aaaaaaaaaaaaaaalllllllllliiiiiiiiiiivvvvvvvvvvvvvvvvveeeeeeeeeeeeeeeee!!! for now lol Lets see what happens after i install wm6 I couldn't get the cingular rom but i had already dowbloaded the button rom i found here earlier and it worked like a dream!! quick and easy!! thank you all soooooo much!
hi all. one more little thing. after adding the new rom to get it back to life, now the numbers don't match so i can't upgrade to wm6. i have ipl 1.01 spl 2.26. advice?
flash to the tmo 2.26 or cingular 2.25...that will give you an IPL/SPL of 2.xx
then, you can flash to WM6
i want to delete this message. can't find a way to do it.
there's any other way to flash without usb cable?? sorry to bug in this thread but i lost my usb connection somehow and did a hard reset and still doesn't work. my phone charges. and no is not my computer cuz my wifes phone same as mine does sync i have a tmobile mda also known as the cingular 8125.
fallon75 said:
hi all. one more little thing. after adding the new rom to get it back to life, now the numbers don't match so i can't upgrade to wm6. i have ipl 1.01 spl 2.26. advice?
Click to expand...
Click to collapse
keep reflashing buttons rom until both ipl/spl are the same number. if they are different, then the flash didn't complete correctly. (it happens often, so it's kinda normal). just keep reflashing. after both ipl/spl are the same, then CID unlock and then update to an official carrier...then flash a wm6.
can anyone help me??
Check if "USB" displayed when in bootloader mode (Camera+reset) with Wizard connected to PC.
If so, you may try to flash another ROM through bootloader.
starkwong said:
Check if "USB" displayed when in bootloader mode (Camera+reset) with Wizard connected to PC.
If so, you may try to flash another ROM through bootloader.
Click to expand...
Click to collapse
it does shows but how can i flash?? it still won't connect o my pc. my pc doesn't recognize it. but it does recognize my wifes phone.
Try to run RUU straight with Wizard connected and running in bootloader mode
have a charmer. I tried to put wm6. but spl and ipl was 1.12. the phone start up and hang when installing some cabs. i restart ir and it allways crashes at t-mobile logo. i updated the rom to aku 3.3. all ok. but continues chashing on t-mobile logo. i try a hard reset. gives me a fat error. I try to put the rom from prophet to try to format it. but that rom upgrade reach 95% and stop. give me a error. this nbf file cannot be used to upgrade this device. I tryed all types of roms. most of them crashes at some point and give me that error. the rom aku 3.3 german and wwe, install perfect. I think that is the only roms I can send to my charmer. but i can´t format whith that rom, fat error. I have 3.08 spl ipl 1.12 because i sent an old charmer rom. ipl downgrade, but spl don´t. do you think my device can be protected?? I dont know that to do more, to bring the charmer back to life. will sd card method work? please help me.
Charmer dead after wm6 update whitout cid unlocking
Hi @all
i have the same problem.
iam stuped and make an wm6 update from ipl1.12 and i have forgot to cid unlock my charmer.
after the update to wm6 all looks like good. the bootscreen from wm6 i have see.
after the reset the charmer hangs at slashscreen.
now i make a update to aku 3.3 ger.
that works but hangs in the t-mobile spaschscreen.
i have tray all downgrading methodes i have read here but nothing works.
jet i have a ipl 1.12. and spl 3.08.
I think only a sd-card rom update works. but i dont have found an sd-card rom to use.
sorry to my bad english.
please can anybody help me?
cu AxelD
Is my phone already dead? Please help me!
Hi, I have a similar may be the same problem!
My phone is a German t-mobile mda compact 2
First I work with “lokiwiz v.02” to unlock the SIM, and it works really well.
Then I installed “Charmer_Touch_ver._2.1” and I could calibrate the screen, and after that Win Mobile 6 installed all the extra stuff automatically. After that the device made a reboot, but it stop at the t-mobile boot screen.
Because the bootload modus is still running, I installed the newest original t-mobile software “RUU_compactII_AKU3.3_38222_382117_026921R_TMO_DE_GER_Ship” but this also didn’t solve the problem.
Hard reset didn't work and always says "Format is
The Start screen shows me this information:
IPL 3.08
SPL 3.08.0000
GSM 02.69.21
OS 3.8.2.22
Is my phone really dead or could someone tell me a trick to reactivate it?
I think noone have a solution for us. I tried to send commands to phone whith mtty. and I can´t send. I don´t know why. so f we cannot send commands the sd card method will not work too. the only olution is to jtag the charmer. but can´t find any pinout information. if anyone knows this informtion, please help.
Hi All, tried to updrade charmer to touch flo ver2.1 but had error that host disconnected, now will only boot to tmobile splash screen with this info (noticed os has changed but cant remember original) also tried soft and hard resets to no avail
IPL 2.06 .0001
SPL 2.06 .0001
GSM 02.19.21
OS 4.0.0.0
I can also boot to the three colour screen and it recognises when the usb is plugged in but i cant seem to flash anything, i have tried a number of RUU but get different error messages, mostly that i need a newer upgrade tool or invalid vendor etc.
any help greatly appreciated
UPDATE: managed to flash this rom, (charmer_wm6_vlono_004.4) says all was ok but still stuck in tmobile boot screen??? info still the same
IPL 2.06 .0001
SPL 2.06 .0001
GSM 02.19.21
OS 4.0.0.0
HELP!!!
UPDATE: Managed to load latest tmobile charmer rom RUU_Charmer_38221_382116_026921_TMO_UK_WWE_Ship.exe
Will i be able to load touchflo 2.1 now?
cheers
i got the same problem and i fixed it^^
1. i started charmer in bootloader mode (press and hold power button while you reset with stylus)
2. i installed T-Mobile AKU 3.3 from handy-faq.de
3. i installed [vlodeck TouchFLO WM6 ver. 2.1]
works perfect^^
http://www.handy-faq.de/forum/htc_charmer_download_157/
Nokia 3650 said:
http://www.handy-faq.de/forum/htc_charmer_download_157/
Click to expand...
Click to collapse
oh yeah.. i forgot
I used a crude method of fully charging the battery. I downgraded to the default T-mobile ROM that came with the unit. After the flashing process, was complete, the unit rebooted (as it was supposed to), then switched itself off after showing the SPL/IPL data for about 3 seconds.
The battery, was fully charged in a universal charger. To get it to turn on again, I have to remove the battery for a few seconds. A hard reset, doesn't fix the problem. I can still enter the boot-loader though
I've tried all the various ROM files on this site, with no success. Any suggestions?
I've PMed you saying that you can try flashing WM5 prophet rom. It should work.
Thanks for the PM. Unfortunately, the propht ROM produces the same result.
Hi!
Help please!
My MDA compact II was died!
IPL 1.13
SPL 2.06.0000
GSM 01.15.20
OS 2.6.2.27
This is incorrect!
I don't know what is that?
I am in a mess!!!
Help please!
mine died too
when I try to install AKU 3.3 always at 80 % i get a 302 connection error