Kaiser Included HeadSet functions/ Problems - Tilt, TyTN II, MDA Vario III General

Hey
Iam using the originial headset for a while, now something is wrong with it:
if i move the cable very near to the connector to phone when its connected following happens:
1. It opens VoiceCommander(Like the Button near the microphone oft the headset)
2. It calls the last person i called
the second point i dont understand, how that can happen, when no button is there for this
point 1 i could solve because i dont use the voicecommander, i just deactivated it in the registry, but point 2 i cant deactivate and this stops me from enyojing music with the nice headset...
I dont want to buy new ones, because there are very nice but expensive to buy new ones
thx scilor

Related

Tmo Wing Bluetooth problem

for some reason with my bluetooth headset turned on as i try to locate my device even though they're side by side it can't locate and pair with both devices.
Edit.. Sorry i just fully read the bluetooth manual and its required that you hold the task button down for 8seconds so that it maybe recognized by other bluetooth devices.
Posted incase anybody is as ignorant as myself
wow i bet u dont have the visibilty on

Original Handsfree Kit

What is the silver button on the original handsfree kit meant to do? when i have an incoming call it wont pick up so, so is there meant to be another function to it or something? thanks
i second that also
this key doesn't answer the incoming call
is there someone else has this problem ?
anyone actally used the handsfree kit?
The wired one? I use mine all the time, answers calls here, and a double press makes it dial last number..
hi, i'am also having the same issues.
the silver button does not pick up calls.
has anyone found a solution for this?
I have the same problem
I live at HK
I have been to the Service Center,
But denied it is the handfree fault but the rom bug..
I argued with them, then changed to a new handfree,
but the problem still there....
Hi everybody,
I'm new here and very grateful for all the brilliant solutions you guys come up with to all sorts of issues with x1.
I have the same problem with my hands-free: the button doesn't work and neither does the microphone. Until now, I've thought of it as a simple matter of replacing the hands-free kit, but now I see the suggestion that this is a Rom bug! Will anyone be able to elaborate a bit on this?
thanks and best regards,
Sune
Really not sure it is real or not that is a rom or software bug,
but sure quite a number of problem of people experienced such problem!
I hope SE not to put a death ear on this issue.
It is really annoying as I quite often used the handfree.
hello everyone
the same problem on my russian x1 handsfree. Have tried to fix it with some patches - no results. Then I've bought Nokia Xpress music handsfree, and it works perfectly (and radio works too).
update
VERY SAD, but it doesn't fix the problem. bad quality of X1 jack - thats the problem. Xpress key doesn't answer the incoming call periodically too, but handsfree itself working good all the time
seljean said:
hello everyone
the same problem on my russian x1 handsfree. Have tried to fix it with some patches - no results. Then I've bought Nokia Xpress music handsfree, and it works perfectly (and radio works too).
update
VERY SAD, but it doesn't fix the problem. bad quality of X1 jack - thats the problem. Xpress key doesn't answer the incoming call periodically too, but handsfree itself working good all the time
Click to expand...
Click to collapse
The first time i got to know the headphone dosen;t work in answering call, I really feel astonished. It is such a basic function of phone, how can the genius of SE dose not test it. Do them think we will buy another handfree???
Really disappointed of SE.....
swazpurohit said:
What is the silver button on the original handsfree kit meant to do? when i have an incoming call it wont pick up so, so is there meant to be another function to it or something? thanks
Click to expand...
Click to collapse
Hi I'm Chris from Sri lanka,
Yes, I have the same issue! The handsfree seems to work when I remove it and re insert the jack during an incoming call, but not initially! It is very temeperamental and annoying. I also have a problem when I get an another call when I'm already on a call while using the handsfree. The current call goes to speaker phone and the party cannot hear wht I'm saying through my handsfree!
So I am forced to remove the handsfree and talk during such instances! Crazy this, especially since answering phone calls is one of the core functions of a cell phone! what's the point in having all the frills when answering a call is so tedious!
This is very disppointing, especially with such a high price tag to boot!
same case here. im really disappointed...
i guess that if i can when asus glaxy came out i will change mi xperia for that one... this phone is really "buggy"...
Same probleme here unfortunately.. I tried to remove all
additional programs related to dialing and volume,
switched to the new ROM, but no changes. Button on headset
does not work and microphone neither.
I also have same issue, both HK new stock ROM & cook rom also.
i'm form India, had purchased Xperia X1i and using Airtel network. when i connect my hands free and attend one call the moment second call come, automatically my loud speaker gets activated.
is any facing the same problem in Indai or any where else? will any one help me this.
is there any solutions?
squarecircle said:
Hi I'm Chris from Sri lanka,
Yes, I have the same issue! The handsfree seems to work when I remove it and re insert the jack during an incoming call, but not initially! It is very temeperamental and annoying. I also have a problem when I get an another call when I'm already on a call while using the handsfree. The current call goes to speaker phone and the party cannot hear wht I'm saying through my handsfree!
So I am forced to remove the handsfree and talk during such instances! Crazy this, especially since answering phone calls is one of the core functions of a cell phone! what's the point in having all the frills when answering a call is so tedious!
This is very disppointing, especially with such a high price tag to boot!
Click to expand...
Click to collapse
even i facing the same problem.
is there any solution
The handsfree seems to work when I remove it and re insert the jack during an incoming call, but not initially!
Click to expand...
Click to collapse
Samething here, and the above works for me too (Remove and re insert), but SE really need to fix this for us.
I believe it's a hardware problem, bad 3.5mm jack!
My right earphone's volume has fallen to one tenth. I have it for less than a month. Good listening but bad manufacturing quality.
Personally I don't think it's bad hardware, I think it's bad firmware/rom.
Currently, with GENERIC UK ROM R2AA010, three presses of headset button dials last number, long press disconnects. Not tried incoming call yet.
I really need to be able to customize this buttons function, especially to activate Voice Command, so that I can make calls, play music etc, without the need for touching the phone. Only then, will I be able to make a button for the handlebars on my motorbike.
Want to use a fully wired system to save on battery power, rather than bluetooth. Also, in all the years of using bluetooth, I have yet to find a combination of handset and headset that work seamlessly.
So far, not impressed with the lack of functionality of this headset, but can see why it works like this. Essentially SE should have included Voice Command, then this hardware/software combination would have been shipped working effectively. I think it is merely a cost saving exercise and SE need to provide a patch and fix in their next rom release.

Pairing bluetooth headsets

I just recently bought a new stereo bluetooth headset (dell BH200) which sounds great when I play music through it, but it comes with a gigantic flaw. I can't make or recieve calls. The moment any of that happens, the headset disconnects itself. I'm wondering what the problem is since the headset does support 2.0 with EDR and so does the fuze. One thing I did noticed though was that when I paired the headset, it did not ask for a passkey at all and just went straight to "save".
I'm wondering if there is anything that I can do to make the headset work with phone if anyone has any idea. I was lurking around and someone mentioned something about CoD (class of device) but I dont think that's the issue.
Thankyou for your time reading this post.
mputtr said:
I just recently bought a new stereo bluetooth headset (dell BH200) which sounds great when I play music through it, but it comes with a gigantic flaw. I can't make or recieve calls. The moment any of that happens, the headset disconnects itself. I'm wondering what the problem is since the headset does support 2.0 with EDR and so does the fuze. One thing I did noticed though was that when I paired the headset, it did not ask for a passkey at all and just went straight to "save".
I'm wondering if there is anything that I can do to make the headset work with phone if anyone has any idea. I was lurking around and someone mentioned something about CoD (class of device) but I dont think that's the issue.
Thankyou for your time reading this post.
Click to expand...
Click to collapse
mmm me thinks that it may not have paired correctly. I don't actually know much about the model you have. I have a Iclip R32 which I have had paired with most of my phones. It always asks for the passkey. I have always, once paired, made a call to my phone while the headset is connected. Not sure if it is related to my device or not but if I do not do this it will do weird things when I listen to music and receive calls. Sorry if this has not been of much help to you.
Bottom line: I would delete the pairing and do it again.
if you're not sure which bt headset it is, it's up on the dell website. Let me snag a link for you real quick. The problem is it only does half the function i want it to which is aggravating.
Here you go:
http://accessories.us.dell.com/sna/...etail.aspx?c=us&l=en&s=dhs&cs=19&sku=313-6220
that's the headset I got. The thing that strikes me as odd is that I couldn't enter a passkey nor is there an option for me to force to provide a passkey like vista. I heard rumors about the bluetooth stack automatically assuming passkeys for "unsafe" devices like headsets and all that. If anything should I consider getting a different bt stack? People were recomending Widdcomm's...
mputtr said:
if you're not sure which bt headset it is, it's up on the dell website. Let me snag a link for you real quick. The problem is it only does half the function i want it to which is aggravating.
Here you go:
http://accessories.us.dell.com/sna/...etail.aspx?c=us&l=en&s=dhs&cs=19&sku=313-6220
that's the headset I got. The thing that strikes me as odd is that I couldn't enter a passkey nor is there an option for me to force to provide a passkey like vista. I heard rumors about the bluetooth stack automatically assuming passkeys for "unsafe" devices like headsets and all that. If anything should I consider getting a different bt stack? People were recomending Widdcomm's...
Click to expand...
Click to collapse
Mm I checked them with the link you sent thanks for that.
Maybe my headset is getting old but it always asks for a passkey when I connect it. My Touch Pro did just like my Kaiser and Hermes. Sorry but maybe you will need to check with Dell. They do not mention any thing but I'm assuming that they have a microphone for phone calls....
edit: Doh I just read the 2nd page of reviews and it does have a mic. Sorry should of checked that before.
Well since your touch pro most probably runs wm6.1, i doubt it's because your headset is old. I wonder if there's a way to disable this automatic passkey guessing thing.
Anyone? any ideas on how to disable the automatic pin number guessing feature of wm6.1?
Kicks post up to page 1
So what do you guys think?
Would it be a good idea to use a different bt stack or am I stuck with no choice at all?
Need Help Badly!!
hi i'm trying to pair my bluetooth headset (Samsung WEP200) but everytime i put the pin number (that is given by the bluetooth headset) it always said "Your Device did not connect with Samsung WEP200. The connection Failed or the passcode is incorrect".
how to install the hotfix (the hot fix from HTC website) on my HTC Touch Pro? everytime i copy the .exe file into my device, and run it, i always got an error box. Incorrect Device, "Please use the correct Device to Install This Hotfix program!" i don't know how it happen, i download this from HTC support page. i select the phone (HTC Touch Pro) and in the "Software Download" tab it show that there are 3 available download, the Hotfix, the Rom and Application.
i really need help....... pls, someone that have the same proble with their HTC Touch Pro bluetooth connection.....
is there a way to disable the automatic passkey mode that came with the MS bt stack or anything like changing my stack to a different' company's
hmm just want to ask.. have someone tried to pair Philip SHB7100 with HTC Raphael yet?? because i would like to buy this bluetooth, since my samsung WEP200 is not compatible...
thank you
excelex said:
hmm just want to ask.. have someone tried to pair Philip SHB7100 with HTC Raphael yet?? because i would like to buy this bluetooth, since my samsung WEP200 is not compatible...
thank you
Click to expand...
Click to collapse
Read here: http://hongkongphooey.wordpress.com/2007/10/23/unboxing-philips-shb7100-bluetooth-stereo-headset/

X1 wired headset receive calls problem

Hi!
I have one black X1i SW ver R3AA010, GENERIC_UK rom.
Great phone, but i have problem with the wired factory headset.
If i have call, phone playing ringtone, and i want receive this call, but no effect. Another problem is mic is on the phone enabled, not on the headset - in ear-phone mode.
On another forums reported same problem.
I see now only one solution:
1.,Unplug Headset from phone
2.,Incoming call, after hearing rintone - plug in the headset
3.,Problem is fixed..., but only to next soft reset or next unplug
Is there any registry mod or cab fix to this?
example : manual headset mode on/off
pls help me, thank you
As you mention, the problem has been scarcely discussed in other threads (and forums), but no one's seemed to find a solution. I'm not even aware if the headset problem is a general flaw in X1, or we're just a few unfortunates.
I won my X1 in a competition so I don't think I'm really in a position to be pissed off, but this defect is indeed a MAJOR drawback, and it surprises me it hasn't been criticised more loudly in e.g. reviews and forums.
The problem smells to me like a firmware issue (though I really don't have a clue), i.e. something that our friends at Sony Ericsson (are you out there, guys?) should be able to fix in an update, but they don't.. :-(
Anyway, my workaround is to make sure the headset is 'armed' in advance whenever I want to be prepared for an incoming or outgoing call. E.g. before I hop on my bicycle, I 'simply' make a short call to whatever number, e.g. to my voicemail, and as soon as there's a connection I plug in my headset and hang up. Now the headset works - I test it by pressing the headset button twice, which should initiate redialling the last number used.
In any case, it shouldn't be necessary to make such arrangements! My previous mobile was a crap, crap Nokia - but I miss it because its headset worked like a charm.
In fact, just out of curiosity - if anyone reading this has an X1 without any headset problems (i.e. mic and button not being responsive), please speak up. Maybe we can then isolate the problem.

Headphones are making undesired calls

Hi all,
It seems to me that I've the same problem explained here : http://forum.xda-developers.com/showthread.php?p=4782712#post4782712
Summarizing, when I've the headphones plugged in, I randomly automatically make calls to the latest contact I've phoned. I'm almost 99% sure that it's because the cable which have an internal broken wire which launches the phoning call order (I'm not pressing the headphones button before you ask it).
So it seems that I don't treat my headphones properly (they are too fragile in my opinion ). These are my 2nd HTC official headphones by now and I've no intention to buy a new ones because they work perfect except for that, so my idea is to block that signal in the PDA.
Is there any way to do that? Via registry is it possible to block that signal/order?
Any help is appreciated!
Same problem here
Hy, I've got the same problem with my HTC Diamond. When I have my headphones plugged in it makes undesired calls or starts the Voice Speed Dial.
It's really annoying and I'm thinking of getting rid of it because I can't listen to music anymore on it (with headphones on).
I'm really curious if there's a way to disable these functions.
Same here...
I always thought I was pressing the button on the wire.
I since dumped them and bought a standard usb-3.5mm adapter to use with some other headphones
peron said:
I always thought I was pressing the button on the wire.
I since dumped them and bought a standard usb-3.5mm adapter to use with some other headphones
Click to expand...
Click to collapse
Yes, that's my purpose...buy headphones 3.5 but I'm afraid I'd lose the radio option

Categories

Resources