Anyone experience their Tilt turning on by itself just when you turn it off (stand by-button on the side)?
I would turn the unit on standby and put it back into the case and it would turn on by itself and a 3 beeping sound would activate. I thought that the Tilt has some kind of motion sensor thing.
Is this an issue and how can it be solved?
If the screen slides out slightly the phone will come out of standby. The 3 tones could be the piano slide out sound.
good catch DaneMaximus
the keyboard uses a magnetic switch, by any chance......does you case have a magnet in it?
thats what i thought too but i would try moving it a slight and it doesnt go on.
Dont know about the magnetic...where is it on the case?
Ok, when i force the open keyboard it is playing the closing piano chime. But why is it doing this? I dont think its opening since the phone is new.
I know why this is happening. It turns out the the opening slide from the Tilt is a magnetic trigger and when I put it into my leather case, it has a magnetic closer lid where it is activating the trigger on the Tilt.
Just have to be careful when inserting the tilt into the case. At least theres nothing wrong with the tilt.
You could disable slide wake.
ahhh... good suggestion. How do you disable slide awake?-
Never mind found it in kaiserTweak.
Thanks for the suggestion!
Related
The Hermes uses a magnetic sensor to determine when the keyboard has been fully opened and triggers the switch to landscape mode and back.
This causes my screen to switch to landscape mode every time I put it into my Seidio case with a magnetic cover latch and I have to wait for the screen to switch back to portrait whenever I remove it.
Can any current owners tell if the Kaiser works the same way?
Thanks in advance.
Bump.
Anybody. . . Buehler. . . .Buelher. . .
jetjock said:
The Hermes uses a magnetic sensor to determine when the keyboard has been fully opened and triggers the switch to landscape mode and back.
This causes my screen to switch to landscape mode every time I put it into my Seidio case with a magnetic cover latch and I have to wait for the screen to switch back to portrait whenever I remove it.
Can any current owners tell if the Kaiser works the same way?
Thanks in advance.
Click to expand...
Click to collapse
The answer is yes it does use a magnet operated switch.
BUT - the Kaiser rotates the screen much much faster than the TyTn and so even if you use a magnet to rotate the screen it instantly goes back when you take away the magnet. In fact I carry mine in a Hermes magnetic case and not once have I seen it in the wrong orientation.
Mike
Thanks for the info.
I'll plan on keeping the same case in that case
Is there any way to DISABLE the screen rotation?
I frequently accidentally slide out the keyboard, causing the rotation.
Stormdog said:
Is there any way to DISABLE the screen rotation?
I frequently accidentally slide out the keyboard, causing the rotation.
Click to expand...
Click to collapse
yes, kaisertweak and advancedconfig allows you disable the device comming out of standby and rotating.
Hi @ all !
There´s a thing very annoying in the new Kaiser... You cannot use any belt-pocket with magnetic closers !
After setting the phone to standby via one short press on power button, I found it back turned on again, everytime I took it out of the belt-pocket.
First I thought, that this must be the keyboard slide mechanism, cause the phone also comes back, when you slide out the keyboard, but I kept an eye on it, not the move the slider while putting it into the pocket and back out again. Then I thought, that it was the light sensor, but some tests made me sure, that it must be something else.
Finally I found out, that it turns back on again, cause I´m still using the belt-pocket of my old TyTN I with the 2 magnets as closing mechanism... If you try and hold a magnet over the keyboard in the area of S,D,E,X,F or even on the back side in the same area and move it around just a little bit, the phone turns on... Crazy, but true !
Now I know, why they gave that awful new belt-pocket with the tape-closer to the Kaiser...
Hope that helps
Marco
It is partly related to keyboard... it has a magnetic sensor that it is activated when keyboard is released, so the magnet from your holster tricks the sensor into believing keyboard is out, so it activates screen.
I guess thats why they have the velcro closer on the one that is shipped with the phone. This is somthing to consider when buying a nice Piel Frama one.
Absolutely it's the keyboard magnet operated switch that does it. But, I know you can run a magnet (let's say the case magnet ) over the d-pad area (seems to do it on mine) and the Kaiser will turn on. - However, I have been using the TyTn case also and I have not noticed it turning on just by sliding the Kaiser in and out. In fact I have just sat here and put it in and out every which way (for the last ten minutes) and it has not come on.
Maybe your magnets are stronger than mine or your keyboard switch more sensitive? I am also not keen on that "tape" closing on the new case.
Mike
lol i wish i would have read that some place, i thought it was the keyboard some switch but didnt think they would use a magnet, it was pissing me off a lot while i was driving, now i know i found on my own, but the magnet that i have is shielded a bit, but still just the right position and it will trigger the switch
I sure hope this was posted some place in a FAQ or wiki, if not it should be and if it was, then shame on me for not reading that part or noticing it
Magnetic sensor via magnet in holster.
Just found out this "feature" with a BB holster...
Has anyone found a way to exploit/use this feature to turn-on the device when removed from the holster?
That is something I always envied with my wifes Blackberry.
I've noticed this too
I have the same problem, but since mine is set not to wakeup when the keyboard slides open I can't see how the magnet could be the culprit.
I had the same problem with my Nokia and Kaiser.....Never thought it was because of the magnet sensor in the device....To tell the truth...I didnt know that it had one inside.....Thanks for the info....
Would it affect the sensor in anyways....if it doesnt, I can actually use this "feature" so my phone is awake each time I pull it out of the belt case......
Hi all,
I have had this problem with the Kaiser sliding open frequently when in pocket while walking, or getting in/out of car, climbing stairs, etc..i.e any movement of legs, Thus resulting in frequent noise of it opening up, and also it eating away the battery!
The solution i found to this is to keep the Kaiser upside down in the pocket. i keep it screen facing my leg, and upside down position, and since then it has never opened up on its own till date!
Hope this helps!
I'm wearing my phones like this for my whole life, never had any issues
Or use Kaisertweak to disable the wakeup on slide option.
snooginsguy said:
Or use Kaisertweak to disable the wakeup on slide option.
Click to expand...
Click to collapse
yea this method is more efficient and practical ahah. kaisertweaks, small app, does big things.
hi guys
I have Att tilt and since 3 days a go my phone keep turning on by it self. any ideas how to fix this? Thanks.
i'm defnitely sure u need to call in an exorcist. for the time being, pls place the phone within a ring of garlic cloves
It's probably the instant messenger receiving an SMS message with someone signing on/off or you getting a message.
if you are using a case with a magnet in it it will cause it to turn on like if you were sliding it open to fix this download kaiser tweaks and turn off the option to turn on when slide open or keep away from magnet cases
Re
steve960 said:
if you are using a case with a magnet in it it will cause it to turn on like if you were sliding it open to fix this download kaiser tweaks and turn off the option to turn on when slide open or keep away from magnet cases
Click to expand...
Click to collapse
This is indeed the only thing i can imagine is happening. Strong radiowaves can turn on/off devices and even uses them..... Just to give a exemple, I work on a warship and we had a 250KW powercable with some leaks in the isolation. This causes some of the other equipment to power on and even use it while all safeties were still on!
thanks guys for your help. i will try to disable the sliding thing. i hope it works.
Verified
My brother wanted to give me his old Wizard holster which closes with a magnet. I told him the magnet might cause my screen to turn on. Sure enough, as soon as the phone got near the holster the screen came on and switched to landscape just as it would if I had flipped out the keyboard.
Guess that's why my Kaiser came with a holster that uses velcro.
This has been driving me nuts since I got my Tilt! The slightest sliding movement of my screen would wake the phone up.
Thanks for the easy fix with the Kaiser Tweak setting!
Hi guys,
I did the Kaiser Tweak setting but still same issue from before. every like 5 to 10 min my phone comes on by itself.
any other sugestions?
now im having the same problem. wtf is going on. no magnets near my phone. it sucks lol
Just got a N6. I love the phone and updated to 6.0.1 but havea few weird things happen that has never happened on my N5.
Sometimes when I pull my phone from my pant pockets I will feel the phone vibrate and the camera is turned on. I have a Spigen case with kickstand on it. I was wondering if there might be some shortcut by pressing some buttons to get the camera activated that I may accidentally be doing.
I know from lock screen I can access camera by swelling at bottom from right to left.
Any suggestions what night be causing this?
Also another word thing that will happen is Google now will get activated while I am using my speakerphone. I am playing baby lullabies to put my baby to sleep and sometimes the Google now listening nice will get activated. I can't figure it why.
Thanks
Perhaps double tapping the power button is causing the camera.
Exactly my thought.
HumpDdumpD said:
Exactly my thought.
Click to expand...
Click to collapse
That was it. I guess this is a new feature of the 6.0.1 and didn't see it.