AT&T Settings Now Giving Me Problems - Tilt, TyTN II, MDA Vario III General

When i use the "at&t settings for dummy's" i all of a sudden start to randomly get cant connect errors to isp.cingular and wap.cingular. any suggestions?

phan10m said:
When i use the "at&t settings for dummy's" i all of a sudden start to randomly get cant connect errors to isp.cingular and wap.cingular. any suggestions?
Click to expand...
Click to collapse
Remove the check box for the PROXY SETTINGS.
Bill

Go and edit your media net settings, make sure "User IP Header Compression" is NOT checked, this has given me problems in the past with some of the settings cabs from forums. Also, you can try setting your DNS servers to automatic, if they aren't already.

Related

xdaIIi-internet coonection

Please, please help. I have just managed to connect my xdaIIi to my wireless network, but am unable to connect to the internet. Whenever i try to connect it uses GPRS(O2 active) and I am left with a blank screen.
Any help greatly appreciated, it is driving me mad!!!!
just delete gprs setting for the first time and it would be ok. later you can get gprs setting back
Thanks for responding, but when I try to cancel the gprs it returns every few seconds.
Some applications fire up the internet connection if it is down, like Internet Explorer.
Are you sure that all your applications are properly shut-down and not running hidden in the background? ( Settings / System / Memory / Running Programs)
Checkout at Setting / Connections / GRPS Setting... manage existing connections and under proxy settings untick at the top....
I tried stopping all programs still no success, looked in gprs setting and did not have any mention of proxy settings, just class 8 or class 10.
I now get the message which says I must provide proxy server information
HTTP
WAP
Secure WAP
Socks
I have no idea what to do and think I'll just use the laptop for surfing and forget about the internet on the XDA.
Thanks for all of your help so far
dont look under grps setting that got class 8 or class 10. Looks under Connections, the got your GRPS Setting..... manage existing connections.... you'll find the proxy setting.....
hello
newbie here am having same problem cant connect via wifi to internet ?????
I have unticked the "this network connects to the internet" but still no success. Everytime I look at the proxy settings the box has reticked itself.
I must be really stupid, I have tried all of the above an still to no avail. I now get the following message
Unable to coonect: you have no modem entries created, and no network card.
I once used this xda on my brother in laws wireless network, but it does not appear to work. Help please!!!
ssdffhj,,k,k,k,k,k
Tried all of the above thanks for everyones help, i have used hitchhiker and it worked a treat.
Can highly recommend this.
TBowman

Need Help for T-Moblie Data

I have Tzones and was following steps to set the proxy for TZONE on my new WING. But some how by mistake I remove the already set 'T-MOBILE Data' from my connections.
Now I only have my own setting for wap which I created for TZONE. How do I get the T-Mobile Data settings?
So when I go to
Start->Settings->Connections Tab->Connections Icon->Advanced Tab->Select Networks
I don't see "My work Network" on top one. I only see the new proxy i set 'wap' there.
Also When I go to PIE->Options, I dont see connection where I can select my proxy.
One more question, If I use WIFI to connect my own router, does T-Mobile charge for it?
In WIFI Settings, what should I select? "The Internet" or "Work". What is the difference between this two?
Please help.
pratikgr said:
I have Tzones and was following steps to set the proxy for TZONE on my new WING. But some how by mistake I remove the already set 'T-MOBILE Data' from my connections.
Now I only have my own setting for wap which I created for TZONE. How do I get the T-Mobile Data settings?
So when I go to
Start->Settings->Connections Tab->Connections Icon->Advanced Tab->Select Networks
I don't see "My work Network" on top one. I only see the new proxy i set 'wap' there.
Also When I go to PIE->Options, I dont see connection where I can select my proxy.
One more question, If I use WIFI to connect my own router, does T-Mobile charge for it?
In WIFI Settings, what should I select? "The Internet" or "Work". What is the difference between this two?
Please help.
Click to expand...
Click to collapse
WIFI is free when you are using it at home.
Solution!
Here are the settings you need.
http://support.t-mobile.com/knowbase/root/public/tm22882.htm?

Tilt Proxy issue

I am having some issues with setting my proxy settings on my Tilt. The HTTP proxy is wiped out once they are set.
Here is what I am doing to create the problem
I go to Start ->Settings ->Connection Tab ->Connections ->Advance Tab ->Select Networks and change both settings in this menu to use "My Work Network" for both settings, and then set the proxy settings for "My Work Network" to use my corporate proxy, everything works fine until I enable a WLAN connection. After I enable the connection the proxy information disappears.
I guess I don't understand why the proxy settings disappear once a live WLAN connections is set.
Does anybody know how I can fix this.
I have tried running the no proxy cab which didn't help.
Thanks for any help
I am so frustrated I want to take this thing back to the store if I can't use it on my corporate network.
it probably does this since the proxy gets sent to you once you connect to a network, and the WiFi connection you are connecting to tells the Kaiser it needs no proxy... your corporate network should sent the proxy automatically, mine does (the wired one, not WiFi)
I called HTC support and they said this was a Mobile 6 bug. They said that they are going to work with MS to create a fix for this issue.
My thoughts are on this, is this going to affect a massive amount of user who have to connect through proxy on their corporate network.
This sucks cause I'm to cheap to pay for the data plan.
Holding my breath for a QFE from Microsoft. I sure not to soon though.
That isn't a WM6 bug. I have an ASUS device, which makes no problems with the proxy settings. It is probably a WM bug combined with the HTC specials.
Regards
Possibly found a solution
http://forum.xda-developers.com/showthread.php?p=1990412#post1990412
Neil

Please Please Please someone respond to wifi connection problems

hello all..ive posted several threads about this..even saw other people having the same problem..
connects to wifi route fine..i have mac address ip..etc says its connected..but thats it..cant do anything else with it..cant connect to internet at all
used the same settings i have with other wm6 unit..it works fine on that..but not my diamond
why why why !!!!!!!
had this damn fone for about 4 months now still cant get it to connect !!!
had wm fones since they first came out...never have i had this problem before
What about DNS??
plasticplanet said:
hello all..ive posted several threads about this..even saw other people having the same problem..
connects to wifi route fine..i have mac address ip..etc says its connected..but thats it..cant do anything else with it..cant connect to internet at all
used the same settings i have with other wm6 unit..it works fine on that..but not my diamond
why why why !!!!!!!
had this damn fone for about 4 months now still cant get it to connect !!!
had wm fones since they first came out...never have i had this problem before
Click to expand...
Click to collapse
If there are other treads about this subject, you should respond in those threads rather that cluttering up this forum.
ref clutter
jmermel said:
If there are other treads about this subject, you should respond in those threads rather that cluttering up this forum.
Click to expand...
Click to collapse
i would but seems like no one has bothered to help out in other threads either
are you sure that you are using the "right" encryption? perhaps you have wpa2
(tkip or aes) and the device checks only wpa? or you enter the wrong password in
wep, then the connection looks like it is established, but you can do nothing with it!
just a thought...
yep
TML1504 said:
are you sure that you are using the "right" encryption? perhaps you have wpa2
(tkip or aes) and the device checks only wpa? or you enter the wrong password in
wep, then the connection looks like it is established, but you can do nothing with it!
just a thought...
Click to expand...
Click to collapse
hello...yep..everything is entered correctly..as i say ive been setting them up for years..this one connects fine..have all the boxes ticked but cant actually use the internet..works fine on all my other wm units
Stupid question tbh but I see this sort of thing every day nearly..
Your subnet is the same as the router yes? Does dhcp allocate one out to you or have u got a static ip on the phone?
Despite being connected to the wifi access without being on the same network you will not gain net access.
Who is your carrier for cell service? If you're on AT&T, and you've run an auto-setup CAB file for your cellular network settings, then you may need to double check your connection and proxy settings. Usually the solution is to select the correct network connection and NOT try to use your carriers proxy when you're connected via Wifi.
If you ARE on AT&T, then do this... Go to Start > Settings > Connections tab > Connections > Advanced tab > Select Networks button. Set both drop down entries to MEdiaNet... for most this will have NO adverse impact (assumes you have a data plan too). OK to save selections.
Now go back to those MEdiaNet drop down selections. Edit either one of them. Go to the Proxy Setting tab. Uncheck the second box indicating this network connection uses a proxy. OK the settings... enjoy non-proxied Internet freedom via Wifi.
If you're not on AT&T, maybe the same proxy issue could be present. But I couldn't help you with your settings. Hope this helps.
ref
hotmail said:
Who is your carrier for cell service? If you're on AT&T, and you've run an auto-setup CAB file for your cellular network settings, then you may need to double check your connection and proxy settings. Usually the solution is to select the correct network connection and NOT try to use your carriers proxy when you're connected via Wifi.
If you ARE on AT&T, then do this... Go to Start > Settings > Connections tab > Connections > Advanced tab > Select Networks button. Set both drop down entries to MEdiaNet... for most this will have NO adverse impact (assumes you have a data plan too). OK to save selections.
Now go back to those MEdiaNet drop down selections. Edit either one of them. Go to the Proxy Setting tab. Uncheck the second box indicating this network connection uses a proxy. OK the settings... enjoy non-proxied Internet freedom via Wifi.
If you're not on AT&T, maybe the same proxy issue could be present. But I couldn't help you with your settings. Hope this helps.
Click to expand...
Click to collapse
hey..thank you for having little think about it..but im in the uk..t-mobile and those settings having nothing to do really with connecting to my wifi at home..except tell my phone it can..which i did..
all the settings are correct...exactly the same settings im using on other wm devices but when they say its connected i can actually do something..rather than on the diamond where it says its connected but doesnt allow me
ive set the phone up identical to another wm6 phone in every way..that connects fine and i can use my wifi ..this phone i cant
Have you tried connecting to a different wifi router, a friend or whatever?
If you can connect there, then that narrows down the problem to your settings, or your router, or the router setup
Do you know anyone else with a Diamond that could try to see if they could connect to your router?
If they can connect but you can't then you could take a look at their connections. Or it could mean a faulty device. If they can't connect either, then this will give you some clues.
I'm assuming that you've deleted the connection and reformed it. Did you choose work or the internet? Have you tried changing that.
Have you tried changing the Authentication to Shared?
Each time you make a change you need to let it 'set' for a few seconds and then reboot.
Can you connect to the internet via Activesync pass-through?
Sorry, that's all I can think of at the moment. If something else occurs to me I'll post back.
Hi.. I'm not sure if this will help or if you already have tried it.
But I had the same problem and the solution was this:
Pres start -> Settings -> Connection -> Wireless Lan -> power mode
Now use best settings, instead of battery save. ( Im not sure if the translation is 100% right. Translated from danish Diamond)
At the start I couldn't load any pages with Wi-fi, though there was no problem with the connection from the router. But now it works like a charm
hey
marisa4755 said:
Have you tried connecting to a different wifi router, a friend or whatever?
If you can connect there, then that narrows down the problem to your settings, or your router, or the router setup
Do you know anyone else with a Diamond that could try to see if they could connect to your router?
If they can connect but you can't then you could take a look at their connections. Or it could mean a faulty device. If they can't connect either, then this will give you some clues.
I'm assuming that you've deleted the connection and reformed it. Did you choose work or the internet? Have you tried changing that.
Have you tried changing the Authentication to Shared?
Each time you make a change you need to let it 'set' for a few seconds and then reboot.
Can you connect to the internet via Activesync pass-through?
Sorry, that's all I can think of at the moment. If something else occurs to me I'll post back.
Click to expand...
Click to collapse
i have tried all except find someone else with a diamond..activesync connects fine and can connect when in sync..as ive said before i have another wm6 device..connects exactly the same way and works fine..this just wont..well connects but doesnt allow me to go any further
yahoooooo or wifiiiiiiiiiiiiiiiiiiiiiiii
BottchDK said:
Hi.. I'm not sure if this will help or if you already have tried it.
But I had the same problem and the solution was this:
Pres start -> Settings -> Connection -> Wireless Lan -> power mode
Now use best settings, instead of battery save. ( Im not sure if the translation is 100% right. Translated from danish Diamond)
At the start I couldn't load any pages with Wi-fi, though there was no problem with the connection from the router. But now it works like a charm
Click to expand...
Click to collapse
well thank you guys very very much...ive used a combination of BottchDK and marisa4755
i removed my wifi connection and forced it to connect from default again..entered my passkey..wacked the old wifi on full power and NOW HAVE WIFI
it does seem devilishly slow though..but think ive read that on some thread before..think will have a looksy about that...
MANY MANY thanks again
Excellent news!
oh no it wasnt actually wifi !!!!!
marisa4755 said:
Excellent news!
Click to expand...
Click to collapse
hey all..sorry but the problem still exists !!!
cant connect..looking at lan settings..
status - Associated to network
it shows connected but status only associated..please tell me when the smeg is going on with this darn diamond before i through it against the wall !!!
This was the solution for me
I have had the same problem Imy phone even should be picked up by the repair centre then as a last try someone gave me the idea to change the leaver at wireless lan/energymodus to the left (best conection) and whala, I have tried it later whit my phone almost on the wirelesspoint to set it to best batterymode but not even at the middle it would do anything, it says conected but no data is comming to the phone, just when the leaver is at his almost left it will work.
Good luck.
Willem
-Have you tried a hard reset? (Data will get lost! Backup first)
-Mac filter activated on the router?
yep tried all
Mr.Eliot said:
-Have you tried a hard reset? (Data will get lost! Backup first)
-Mac filter activated on the router?
Click to expand...
Click to collapse
hello again..yes tried hard reset..have the power set to max..clicked my heals together 3 times also !!!
never in my life have i had such i problem..must have had dozen wm based phones which none of them i had this problem..still have wm2003 unit..wm5 and 6 unit all of which will connect just fine..i dont have the mac filter setup on my router
(
-Have you analyzed your router's log already?
-What is set under Start => Settings => Connections => Connections => Advanced => Choose Networks (translated it, not sure about the exact words)?
-Data connections via UMTS or GPRS do work?
-Go and try another router of a friend or internetcafe.
ive checked
Mr.Eliot said:
-Have you analyzed your router's log already?
-What is set under Start => Settings => Connections => Connections => Advanced => Choose Networks (translated it, not sure about the exact words)?
-Data connections via UMTS or GPRS do work?
-Go and try another router of a friend or internetcafe.
Click to expand...
Click to collapse
yep gprs works fine..looking in the wifi i have all the mac address ip speeds blah blah you could ever wish wish for..just as you would expect if it was connected..which it says it it..but only associated lol

Setting for Tilt Data Plan: KaiserTweak

I just got the data plan and have yet to be able to connect to it? I've tried messing with the KaiserTweak settings. I have data connections enabled. I also enabled leave connection always on but that gave me the connection is not active icon. When I disable that function all I get at the top of the screen is an "H". What do the settings need to be in order to get the data connection properly functioning? I've yet to see the connection is active icon up top.
Update
I am able to update the weather on the HTC home page I'm using by enabling the data connection on all the time but the browsers still do not connect. I also don't see the active data connection icon.
did you uncheck proxy ? if not , do so
Proxy is already unchecked.
You do have a data connection the H means = HSDPA
(Like a 3G connection but faster)
http://en.wikipedia.org/wiki/HSDPA
Also try refreshing your settings (This works for me... and it's annoying!)
Start>Settings>Connections>Connections>Manage my existing connections.
Then "Next" thru all the settings until you get to the end. Press Finish. The data connection drops and the re-establishes.
See if your browser then works.
When I follow that path under connections I don't see a manage my connections option. All I see is "My work network" with 3 options under that. Add Modem, add vpn server and set up proxy.
Try this
Try these files. I use them whenever I flash a new rom and haven't had any trouble connecting since then.
One has all the medianet/isp settings and the other is for mms. I know you didn't say you have a problem with mms, but just in case
Just run and reset and everything should work.
Thanks, I'll have to try those when I get home. The browsers do connect to Wifi with no issues. Could there be a conflict with that? When there is wifi connection available which connection will it grab onto? Wifi of MediaNet? Those files won't affect the current wifi settings used to connect will it?
FuSchnickens said:
Thanks, I'll have to try those when I get home. The browsers do connect to Wifi with no issues. Could there be a conflict with that? When there is wifi connection available which connection will it grab onto? Wifi of MediaNet? Those files won't affect the current wifi settings used to connect will it?
Click to expand...
Click to collapse
I've never had them interfere with WiFi since I use WiFi at home and MediaNet at work.
The settings cab is a pretty simple cab, it really just fills out all the information in the boxes to set up the connections but it saves a lot of time and gets everything right, for me at least, in one shot.
Let me know how it goes.
I tried those cabs and I still can't get any of the browsers to work. Nor my email. I keep getting a connect connect message. Anyone know the proper settings to get the browsers to work? However the weather is able to update on my HTC home page.
i dont nknow if youve tried this but everytime i flash a new rom i have to do this or ill have the same problem.. in your connections settings go through the meus until you find this device connects to: and by default it should say the internet.. but you have to select media net (att right?) cus thats the only way apparently media net is not the same as the internet!
ex: go to setings > connections > connections (icon) > advanced > select networks > "programs that automatically connect to the internet should connect using: and itll probably be set to my isp and you ewant it on MEdia net

Categories

Resources