hello all..ive posted several threads about this..even saw other people having the same problem..
connects to wifi route fine..i have mac address ip..etc says its connected..but thats it..cant do anything else with it..cant connect to internet at all
used the same settings i have with other wm6 unit..it works fine on that..but not my diamond
why why why !!!!!!!
had this damn fone for about 4 months now still cant get it to connect !!!
had wm fones since they first came out...never have i had this problem before
What about DNS??
plasticplanet said:
hello all..ive posted several threads about this..even saw other people having the same problem..
connects to wifi route fine..i have mac address ip..etc says its connected..but thats it..cant do anything else with it..cant connect to internet at all
used the same settings i have with other wm6 unit..it works fine on that..but not my diamond
why why why !!!!!!!
had this damn fone for about 4 months now still cant get it to connect !!!
had wm fones since they first came out...never have i had this problem before
Click to expand...
Click to collapse
If there are other treads about this subject, you should respond in those threads rather that cluttering up this forum.
ref clutter
jmermel said:
If there are other treads about this subject, you should respond in those threads rather that cluttering up this forum.
Click to expand...
Click to collapse
i would but seems like no one has bothered to help out in other threads either
are you sure that you are using the "right" encryption? perhaps you have wpa2
(tkip or aes) and the device checks only wpa? or you enter the wrong password in
wep, then the connection looks like it is established, but you can do nothing with it!
just a thought...
yep
TML1504 said:
are you sure that you are using the "right" encryption? perhaps you have wpa2
(tkip or aes) and the device checks only wpa? or you enter the wrong password in
wep, then the connection looks like it is established, but you can do nothing with it!
just a thought...
Click to expand...
Click to collapse
hello...yep..everything is entered correctly..as i say ive been setting them up for years..this one connects fine..have all the boxes ticked but cant actually use the internet..works fine on all my other wm units
Stupid question tbh but I see this sort of thing every day nearly..
Your subnet is the same as the router yes? Does dhcp allocate one out to you or have u got a static ip on the phone?
Despite being connected to the wifi access without being on the same network you will not gain net access.
Who is your carrier for cell service? If you're on AT&T, and you've run an auto-setup CAB file for your cellular network settings, then you may need to double check your connection and proxy settings. Usually the solution is to select the correct network connection and NOT try to use your carriers proxy when you're connected via Wifi.
If you ARE on AT&T, then do this... Go to Start > Settings > Connections tab > Connections > Advanced tab > Select Networks button. Set both drop down entries to MEdiaNet... for most this will have NO adverse impact (assumes you have a data plan too). OK to save selections.
Now go back to those MEdiaNet drop down selections. Edit either one of them. Go to the Proxy Setting tab. Uncheck the second box indicating this network connection uses a proxy. OK the settings... enjoy non-proxied Internet freedom via Wifi.
If you're not on AT&T, maybe the same proxy issue could be present. But I couldn't help you with your settings. Hope this helps.
ref
hotmail said:
Who is your carrier for cell service? If you're on AT&T, and you've run an auto-setup CAB file for your cellular network settings, then you may need to double check your connection and proxy settings. Usually the solution is to select the correct network connection and NOT try to use your carriers proxy when you're connected via Wifi.
If you ARE on AT&T, then do this... Go to Start > Settings > Connections tab > Connections > Advanced tab > Select Networks button. Set both drop down entries to MEdiaNet... for most this will have NO adverse impact (assumes you have a data plan too). OK to save selections.
Now go back to those MEdiaNet drop down selections. Edit either one of them. Go to the Proxy Setting tab. Uncheck the second box indicating this network connection uses a proxy. OK the settings... enjoy non-proxied Internet freedom via Wifi.
If you're not on AT&T, maybe the same proxy issue could be present. But I couldn't help you with your settings. Hope this helps.
Click to expand...
Click to collapse
hey..thank you for having little think about it..but im in the uk..t-mobile and those settings having nothing to do really with connecting to my wifi at home..except tell my phone it can..which i did..
all the settings are correct...exactly the same settings im using on other wm devices but when they say its connected i can actually do something..rather than on the diamond where it says its connected but doesnt allow me
ive set the phone up identical to another wm6 phone in every way..that connects fine and i can use my wifi ..this phone i cant
Have you tried connecting to a different wifi router, a friend or whatever?
If you can connect there, then that narrows down the problem to your settings, or your router, or the router setup
Do you know anyone else with a Diamond that could try to see if they could connect to your router?
If they can connect but you can't then you could take a look at their connections. Or it could mean a faulty device. If they can't connect either, then this will give you some clues.
I'm assuming that you've deleted the connection and reformed it. Did you choose work or the internet? Have you tried changing that.
Have you tried changing the Authentication to Shared?
Each time you make a change you need to let it 'set' for a few seconds and then reboot.
Can you connect to the internet via Activesync pass-through?
Sorry, that's all I can think of at the moment. If something else occurs to me I'll post back.
Hi.. I'm not sure if this will help or if you already have tried it.
But I had the same problem and the solution was this:
Pres start -> Settings -> Connection -> Wireless Lan -> power mode
Now use best settings, instead of battery save. ( Im not sure if the translation is 100% right. Translated from danish Diamond)
At the start I couldn't load any pages with Wi-fi, though there was no problem with the connection from the router. But now it works like a charm
hey
marisa4755 said:
Have you tried connecting to a different wifi router, a friend or whatever?
If you can connect there, then that narrows down the problem to your settings, or your router, or the router setup
Do you know anyone else with a Diamond that could try to see if they could connect to your router?
If they can connect but you can't then you could take a look at their connections. Or it could mean a faulty device. If they can't connect either, then this will give you some clues.
I'm assuming that you've deleted the connection and reformed it. Did you choose work or the internet? Have you tried changing that.
Have you tried changing the Authentication to Shared?
Each time you make a change you need to let it 'set' for a few seconds and then reboot.
Can you connect to the internet via Activesync pass-through?
Sorry, that's all I can think of at the moment. If something else occurs to me I'll post back.
Click to expand...
Click to collapse
i have tried all except find someone else with a diamond..activesync connects fine and can connect when in sync..as ive said before i have another wm6 device..connects exactly the same way and works fine..this just wont..well connects but doesnt allow me to go any further
yahoooooo or wifiiiiiiiiiiiiiiiiiiiiiiii
BottchDK said:
Hi.. I'm not sure if this will help or if you already have tried it.
But I had the same problem and the solution was this:
Pres start -> Settings -> Connection -> Wireless Lan -> power mode
Now use best settings, instead of battery save. ( Im not sure if the translation is 100% right. Translated from danish Diamond)
At the start I couldn't load any pages with Wi-fi, though there was no problem with the connection from the router. But now it works like a charm
Click to expand...
Click to collapse
well thank you guys very very much...ive used a combination of BottchDK and marisa4755
i removed my wifi connection and forced it to connect from default again..entered my passkey..wacked the old wifi on full power and NOW HAVE WIFI
it does seem devilishly slow though..but think ive read that on some thread before..think will have a looksy about that...
MANY MANY thanks again
Excellent news!
oh no it wasnt actually wifi !!!!!
marisa4755 said:
Excellent news!
Click to expand...
Click to collapse
hey all..sorry but the problem still exists !!!
cant connect..looking at lan settings..
status - Associated to network
it shows connected but status only associated..please tell me when the smeg is going on with this darn diamond before i through it against the wall !!!
This was the solution for me
I have had the same problem Imy phone even should be picked up by the repair centre then as a last try someone gave me the idea to change the leaver at wireless lan/energymodus to the left (best conection) and whala, I have tried it later whit my phone almost on the wirelesspoint to set it to best batterymode but not even at the middle it would do anything, it says conected but no data is comming to the phone, just when the leaver is at his almost left it will work.
Good luck.
Willem
-Have you tried a hard reset? (Data will get lost! Backup first)
-Mac filter activated on the router?
yep tried all
Mr.Eliot said:
-Have you tried a hard reset? (Data will get lost! Backup first)
-Mac filter activated on the router?
Click to expand...
Click to collapse
hello again..yes tried hard reset..have the power set to max..clicked my heals together 3 times also !!!
never in my life have i had such i problem..must have had dozen wm based phones which none of them i had this problem..still have wm2003 unit..wm5 and 6 unit all of which will connect just fine..i dont have the mac filter setup on my router
(
-Have you analyzed your router's log already?
-What is set under Start => Settings => Connections => Connections => Advanced => Choose Networks (translated it, not sure about the exact words)?
-Data connections via UMTS or GPRS do work?
-Go and try another router of a friend or internetcafe.
ive checked
Mr.Eliot said:
-Have you analyzed your router's log already?
-What is set under Start => Settings => Connections => Connections => Advanced => Choose Networks (translated it, not sure about the exact words)?
-Data connections via UMTS or GPRS do work?
-Go and try another router of a friend or internetcafe.
Click to expand...
Click to collapse
yep gprs works fine..looking in the wifi i have all the mac address ip speeds blah blah you could ever wish wish for..just as you would expect if it was connected..which it says it it..but only associated lol
Related
When I turn on my phone at work, the wireless connection (open unsecured) connects and works for a few minutes. After some time, it disconnects and without rebooting my phone, I cannot establish a wlan connection.
This is oly the case at work. At home it works flawlessly, but it is another network kind.
Anyone found a solution to this problem? I saw a lot of threads about this but no good answers.
I am using duttys v3.
Not sure. Perhaps there is some sort of time out on your work network for inactive devices, or dhcp ip releases or something weird and "networky" like that?
Or perhaps your phone is going into a power save mode if you are not using it?
Just general ideas, I don't have this particular problem
I dont think many people have this issue! you must not have a setting correct, try downloading KaiserTweak and adjusting the timeout and also take a look at the routers settings I find it strange that a business would have an open network for security issues
austinsnyc said:
I dont think many people have this issue! you must not have a setting correct, try downloading KaiserTweak and adjusting the timeout and also take a look at the routers settings I find it strange that a business would have an open network for security issues
Click to expand...
Click to collapse
I work at the university, and the network is unsecure. You have to enter login and pass at a webpage to gain access.
I cannot reconnect at all once ive been disconnected. So it should have anything to do with kaisertweak or timeouts.
I have tried every setting and combination. I have tried to select work/internet settings. Ive tried to tell the phone its a hidden network / not hidden network. I have tried to use power save / performance mode. Ive tried to turn off 3g, bluetooth, phone (everything basically).
When I tap connect, it says connecting and then it immediately goes to "active" and tries to connect to another network (which I dont have access to).
solwretep said:
When I turn on my phone at work, the wireless connection (open unsecured) connects and works for a few minutes. After some time, it disconnects and without rebooting my phone, I cannot establish a wlan connection.
This is oly the case at work. At home it works flawlessly, but it is another network kind.
Anyone found a solution to this problem? I saw a lot of threads about this but no good answers.
I am using duttys v3.
Click to expand...
Click to collapse
I have worked out the problem.. first if its a WPA enterprise connection, make sure its set to WORK and not INTERNET setting. it will work. my only works with schaps versions not duttys
on my old pda (Acer N50 premium) I had the same problem with my unis network... it would only work (if at all) for a few minutes then nada... but at home it was absolutely fine, quick stayed on and totally responsive... I wonder if it has something to do with the rubbish way unis run their IT...?
Wasted thread
Many do not have this issue.
According to what's being said here by the indiviuals with issues, you're having problems connecting to a certain network...not all networks.
If it were all networks; your device, settings, equipment or rom would be the common denomenator. Since it's one network, it's that network.
Just because a network is or appears to be available, that doesn't mean that you can connect to it.
dwny said:
Wasted thread
Many do not have this issue.
According to what's being said here by the indiviuals with issues, you're having problems connecting to a certain network...not all networks.
If it were all networks; your device, settings, equipment or rom would be the common denomenator. Since it's one network, it's that network.
Just because a network is or appears to be available, that doesn't mean that you can connect to it.
Click to expand...
Click to collapse
no, it could be the phone software. Lets says that a string is added to the registry if the network you are connected to disconnects you; a string that makes the phone cancel connections to the network. And lets assume that the network disconnected you because there is a hidden firewall in the phone software that blocks ping requests, thus making the network believe that the connection is lost and thus disconnecting you. Then we have a moment 22, which is basically something wrong with the phone.
As some readers already pointed out in this "wasted thread", when changing the rom (in one case) or when changing settings from "internet" to "work" (in the second case) there is a great possibility that this problem in fact has to do with phone software and not network.
In my case, it just happens to be neither of the mentioned solutions or any solution that I have found in other threads.
One thing you may want to check is that your wifi is set to max performance. The issue may also be that there is a DNS cache issue, in most cases it can be resolved by manually reconfiguring the connection.
I have been successful in configuring my phone's WLAN to connect to everything from open APS's, WEP, WPA, RADIUS and AP's with proxy redirects, so I can tell you that as with most cases, it's human error.
I have tried max performance.
How do I resolve a dns cache issue? Manually reconfiguring the network did not help (only thing that helps is a reboot).
seattleweb said:
One thing you may want to check is that your wifi is set to max performance. The issue may also be that there is a DNS cache issue, in most cases it can be resolved by manually reconfiguring the connection.
I have been successful in configuring my phone's WLAN to connect to everything from open APS's, WEP, WPA, RADIUS and AP's with proxy redirects, so I can tell you that as with most cases, it's human error.
Click to expand...
Click to collapse
Hi.
I recently bought my s730. Quite pleased with it, but one thing bothers me.
When i connect to my wlan at home (zyxel_2602hw_d1a WPA-PSK TKIP) i'm able to connect to the router, but I don't seem to be able to get an connection to anywhere outside my own network. I tried using Live Messenger, IE, Opera and Skype, but nothing happens.
When I'm using GPRS or EDGE it all works smoothly.
Any suggestions?
Do you have your connection set to automatic or only through your phone network? I have seen a few problems with that.
Also, double check that you are entering wep or any other security protocol correctly, took my 6 tries before it would work, it looked like it was connected to the network but it really wasnt (just personal experience with this phone.)
10332007 said:
Do you have your connection set to automatic or only through your phone network? I have seen a few problems with that.
Also, double check that you are entering wep or any other security protocol correctly, took my 6 tries before it would work, it looked like it was connected to the network but it really wasnt (just personal experience with this phone.)
Click to expand...
Click to collapse
I do have the connection settings in both IE and Opera set to automatic. I's there somewhere else I have to change settings?
I'm quite sure i typed the password correctly. I also checked the client list on the router and the phone showed up correctly.
Gah, cant remember where I saw it but there was a setting in the phone itself for what to connect to.
Another thing to try under the wifi connection open your saved connection and go into it and see if you have it set to connect to the internet or just to the private network under "network type" in the Wi-Fi sub menu of Wlan settings. Its late and I cant think right, i'll see about checking more into it later...
I solved this problem - change your WLAN security on your WLAN router only on exactly MAC adressee (no any WEP) and your Wings is allowed to connect and all will be OK, work OK - Skype, IE, Opera. Problem was only to find MAC adressee my Wings
Wing + WRT54GL
Hi!
I have an S730 and a Linksys WRT54GL router. I've tried to use wlan with my phone, but it doesn't working. I want to use WPA2 with AES without Radius. Is the WPA shared key (router) same to network key(phone)? without security and encryption, it's working well.. I cannot see any syslog. That could be so easy..
klenovcok said:
I solved this problem - change your WLAN security on your WLAN router only on exactly MAC adressee (no any WEP) and your Wings is allowed to connect and all will be OK, work OK - Skype, IE, Opera. Problem was only to find MAC adressee my Wings
Click to expand...
Click to collapse
I tried removing security for my phone MAC address, but there dosn't seem to be any options on my router allowing this. So I'm still stuck;-/
ksga said:
Hi.
I recently bought my s730. Quite pleased with it, but one thing bothers me.
When i connect to my wlan at home (zyxel_2602hw_d1a WPA-PSK TKIP) i'm able to connect to the router, but I don't seem to be able to get an connection to anywhere outside my own network. I tried using Live Messenger, IE, Opera and Skype, but nothing happens.
When I'm using GPRS or EDGE it all works smoothly.
Any suggestions?
Click to expand...
Click to collapse
Did you check network settings? I mean e.g. if you don't use DHCP server and you didn't fill in right settings phone may connect to network but may not get outside. I know it can look like "lame" question, but sometimes even a master can do a newbie mistake..
ksga said:
I tried removing security for my phone MAC address, but there dosn't seem to be any options on my router allowing this. So I'm still stuck;-/
Click to expand...
Click to collapse
usually it is in section WLAN Advanced setup - WEP Encryption - disable and in WLAN MAC Filters - active + allow asotiation with table of adress your Wings - aply . I have Zyxel Prestige 660HW.
I'm sure that DHCP is active, and that I get an IP.
I tried disabling security on my router, but same problem. Connects to my router, gets an IP but still nothing works
ksga said:
I'm sure that DHCP is active, and that I get an IP.
I tried disabling security on my router, but same problem. Connects to my router, gets an IP but still nothing works
Click to expand...
Click to collapse
Your DNS are also provided automatically? Or could you ping (through some app) to any IP address of any server on the internet? If you succee, then we can look for a mistake with DNS.
Problem solved!!!
Okay. Found the cause for all my sufferings...
Power management. under WLAN-settings i changed power setting from power save mode to best performance...
thanks for all the help. hope next time I have a better question
wifi problem
hello everybody,i have tried several times to connect to my router at home but no chance at the end i got this warning saying:
cannot log on to the wireless network this network requires a personel certificate to positively identify you.
Hey guys, i got my kaiser a couple of days ago. Its a brilliant machine and i love using internet on it using my wifi connection at home. Suddenly it has stopped browsing the internet. It connects to wifi alright, show good strength signal and everything but when i enter a web address it takes ages to respond and in the end gives the error 'check name and try again.' what's wrong with it...?
i'd appreciate if some could help.
P.S. i have done countless soft resets and a hard reset as well.
cheers
I've had problems like that before. By any chance is your router named something like Linksys or default? I'm wondering if it's connecting but not using the correct profile. I'm not sure about the phones but on a computer you can connect to wifi that is wep enabled without a wep key. You can't get any data from the router but it shows your connected.
Also have you tried another access point to rule out your router?
Don't you have to go to wifi settings and change it from BEST PERFORMANCE to BEST BATTERY or is it the other way around?
ChumleyEX said:
I've had problems like that before. By any chance is your router named something like Linksys or default? I'm wondering if it's connecting but not using the correct profile. I'm not sure about the phones but on a computer you can connect to wifi that is wep enabled without a wep key. You can't get any data from the router but it shows your connected.
Also have you tried another access point to rule out your router?
Click to expand...
Click to collapse
No, i haven't tried any other AP, its my home network and i have only one router. Its quite an old one but i am sure its not from linksys. Last time i successfuly used wifi internet on my kaiser was a few hours ago before i installed a remote desktop access program on my kaiser. I have uninstalled it now but the problem remains.
The phone might have profiles based on the name of the router, so if you have a common name and it picks another one up of that name, it could cause this sort of problem.
ChumleyEX said:
The phone might have profiles based on the name of the router, so if you have a common name and it picks another one up of that name, it could cause this sort of problem.
Click to expand...
Click to collapse
So what do i need to change, the name of the router or the profile on the kaiser, by the way , where is the profile on the pocket pc ?
P.S. its Belkin and the called WLAN.
go into the com manager and hit settings, then wireless lan. You might want to look around in there to see if you can remove the profile.
RESOLVED
ChumleyEX said:
go into the com manager and hit settings, then wireless lan. You might want to look around in there to see if you can remove the profile.
Click to expand...
Click to collapse
Hi again, you wouldn't believe what i am about to tell you. The problem gets solved like magic just with a couple of clicks. In your power settings for the wireless network, change it from best battery life to best performance and voila! it starts working. The moment you change it back to best battery life, it dies out. I have tested it time and again and use another utility called 'vxutil' to use different commands like ping and see information like default gateways and DNS and DHCP but everything was alright.
P.S. this will only work if the network settings are correct ALREADY!
Thanks for the help guys!
I just got the data plan and have yet to be able to connect to it? I've tried messing with the KaiserTweak settings. I have data connections enabled. I also enabled leave connection always on but that gave me the connection is not active icon. When I disable that function all I get at the top of the screen is an "H". What do the settings need to be in order to get the data connection properly functioning? I've yet to see the connection is active icon up top.
Update
I am able to update the weather on the HTC home page I'm using by enabling the data connection on all the time but the browsers still do not connect. I also don't see the active data connection icon.
did you uncheck proxy ? if not , do so
Proxy is already unchecked.
You do have a data connection the H means = HSDPA
(Like a 3G connection but faster)
http://en.wikipedia.org/wiki/HSDPA
Also try refreshing your settings (This works for me... and it's annoying!)
Start>Settings>Connections>Connections>Manage my existing connections.
Then "Next" thru all the settings until you get to the end. Press Finish. The data connection drops and the re-establishes.
See if your browser then works.
When I follow that path under connections I don't see a manage my connections option. All I see is "My work network" with 3 options under that. Add Modem, add vpn server and set up proxy.
Try this
Try these files. I use them whenever I flash a new rom and haven't had any trouble connecting since then.
One has all the medianet/isp settings and the other is for mms. I know you didn't say you have a problem with mms, but just in case
Just run and reset and everything should work.
Thanks, I'll have to try those when I get home. The browsers do connect to Wifi with no issues. Could there be a conflict with that? When there is wifi connection available which connection will it grab onto? Wifi of MediaNet? Those files won't affect the current wifi settings used to connect will it?
FuSchnickens said:
Thanks, I'll have to try those when I get home. The browsers do connect to Wifi with no issues. Could there be a conflict with that? When there is wifi connection available which connection will it grab onto? Wifi of MediaNet? Those files won't affect the current wifi settings used to connect will it?
Click to expand...
Click to collapse
I've never had them interfere with WiFi since I use WiFi at home and MediaNet at work.
The settings cab is a pretty simple cab, it really just fills out all the information in the boxes to set up the connections but it saves a lot of time and gets everything right, for me at least, in one shot.
Let me know how it goes.
I tried those cabs and I still can't get any of the browsers to work. Nor my email. I keep getting a connect connect message. Anyone know the proper settings to get the browsers to work? However the weather is able to update on my HTC home page.
i dont nknow if youve tried this but everytime i flash a new rom i have to do this or ill have the same problem.. in your connections settings go through the meus until you find this device connects to: and by default it should say the internet.. but you have to select media net (att right?) cus thats the only way apparently media net is not the same as the internet!
ex: go to setings > connections > connections (icon) > advanced > select networks > "programs that automatically connect to the internet should connect using: and itll probably be set to my isp and you ewant it on MEdia net
Hello,
I have an problem. When i'm connected to Wifi and launch Opera, weather update or anything else which uses internet. The diamond makes connection with the 3G/GPRS network. The wifi is being ignored or something.
I thougt that i had seen this problem before on this forum, but i searched and can't find it anymore.
Does anybody know an solution or knows where i can find one?
Grtz
You can set network priority up somewhere, i'd be of more help but i don't remember where this is in settings
I have also been looking for a solution to set network priority as wlan first but cant find where to..
ident
I've been reading this site a fair old bit recently! First time i've been influenced to post though. I'd also love a solution to this. Does anyone know how to change priority settings? I swear i'd turned GPRS off, but whenever I check the weather or internet, it connects, sometimes even when I have a wi-fi connection active.
I wish to only use my Diamond with the wi-fi, don't want to get raped on the data charges. Any help would be greatly appreciated Thanks.
Hesky87 said:
I've been reading this site a fair old bit recently! First time i've been influenced to post though. I'd also love a solution to this. Does anyone know how to change priority settings? I swear i'd turned GPRS off, but whenever I check the weather or internet, it connects, sometimes even when I have a wi-fi connection active.
I wish to only use my Diamond with the wi-fi, don't want to get raped on the data charges. Any help would be greatly appreciated Thanks.
Click to expand...
Click to collapse
That's the exact issue i have! Its bloody anoying!
how about using NoData or from Advance configuration utilities in comm manager actually disabling all other connections ? i've been confronted with the same problem many times and rather use the available Wi-Fi over the mobile internet connections, so that helped me
That's not good enough for me. I have a databundle so when i'm not at home i wanna use that internet. But when i'm at home i want wifi!
I think i found the problem. When you make a connection with a wifi network you can choose between "internet" and "work". When you choose internet there's nothing wrong. When you choose work it doesn't make some kind of internet connection so programs fall back to the gprs.
I'm having the same problems. I'm having a data subscription so don't want to disable it in total. What I tried was go to wifi settings --> network adapters. Selected internet from the drop down box on top (work was default for me). But Opera still connects through 3G or G. What settings did you change exactly Rik_X?
The settings that i changed is when you make a new wifi connection it asks if you want to connect as 'internet' or 'work'. You have to choose work.
With wifi networks allready configured you have to do the following:
Go to comm manager --> turn on WLAN and let it connect to the network --> then push settings --> Wireless LAN. Then go to Networkcards (in dutch its netwerkkaarten) (its under the SSID)
Then click on the connected network and change work into internet. Accept the setting and with a reconnect its works (for me)
Good luck
Rik_X said:
The settings that i changed is when you make a new wifi connection it asks if you want to connect as 'internet' or 'work'. You have to choose work.
With wifi networks allready configured you have to do the following:
Go to comm manager --> turn on WLAN and let it connect to the network --> then push settings --> Wireless LAN. Then go to Networkcards (in dutch its netwerkkaarten) (its under the SSID)
Then click on the connected network and change work into internet. Accept the setting and with a reconnect its works (for me)
Good luck
Click to expand...
Click to collapse
Dank je! This worked for me.
Moderators are working with the same