Database Develop

How to force wifi when available?

Ok, this was working fine on the original AT&T ROM, but since I flashed to dutty's ROM, I cant get it to work. How do I force the phone to use wifi for net access when wifi is turned on, as opposed to medianet? Currently, I have to keep manually switching from medianet to "my work connection" in connection settings.

You can use Kaiser Tweak to set it to disconnect the GPRS connection after a set amount of minutes of inactivity. Then, when you enable WiFi, it should connect ONLY to WiFi.

I think the OP needs to sort out his "work" and his "internet" instead of just trying to turn off radio data.

I have medianet set to internet and my wifi set to work...not really clear what "work" is....just want to automatically use wifi when wifi is connected, and cant find the option to do that.

Anybody???

I did set both connections to "work".
Additionally I added my tmobile gprs connection to the work profile.
All seems to work great.
I can acces my network shares over wifi and connect to the internet. When no wifi is available it connects via gprs.

I keep getting confused on this same issue. i installed the same rom we are talking about. it shows up for me when setting up email accounts. with my wifi turned on, it still tries to go out the 3g connection. I want it to use wifi if that is what is turned on and i think that was working on the death star rom. For the drop down that says "The Internet" I basically want that to point to wifi if on then fall back to 3g. How do we do that?
It should not be named "work".

So whats the solution here?
Under Connections....Select which networks are automatically used:
Programs that connect to the internet should connect using ???
I can either choose Medianet or my work network, I'd like for it to use wifi when available, how is this done?
Programs that connect to a private network should connect using ???
I have this set to my work network.

Easy Solution to 'Auto Wifi"
Buy an Iphone, works seemlessly, and you get a browser too which works, something these HTC phones havn't had in 3 years.

The easiest way to force wifi (since gprs can be acting as a ***** ), is to keep wlan enabled and to install the NOGPRS.cab (aka the modaco nodata plugin) which allows you to disable (but keep) the gprs settings and which you can toggle on (and back off) when needed.

Great little app, saves much annoyance!
Is there an easy way to toggle wi-fi on/off, that can be assigned to an icon or button? At the moment I have to open Comm Manager each time and do it from there.
Rob F

Wifi and 3G

Hi
I just finished setting up Wifi and it works perfect. Is there any way i can make the Diamond use the Wifi connection for programs if such connection exist? Currently it alwasy open a 3G connection even if Wifi is enabled, which kinda sucks, since 3G traffic dont come cheap
So what i want is, if Wifi connection exist use that, else open a 3G connection.
Best regards
Mads

Yes, there is a way. Just go to settings-->connectins tab-->connections-->advanced tab-->select networks and select the one you want to use.
In WIFI settings you have to select the same connection at the "connect to" option!
regards

Hi demacus
Thanks for the reply, but I have some trouble following you guide. First in my Select networks I have to networks, “3” and “Arbejde”. 3 is the name of my ISP and the one that’s currently selected to be used by programs needing access to the internet. In my Wifi “Connect To” option I can’t select the “3” I can only select between “Arbejde” and “Internet” which is just to default networks.
So my question is still the same, how do I make the diamond use a wifi connection if one is present else enable a 3G connection and use that.
Best regards
Mads

Err... in my case, the way it works is.. if I connect to the Wifi, then 3g gets disabled for as long as I am connected to a Wifi network..

If Wifi is available and you ARE CONNECTED (just available isn't good enough, you have to be connected), my Touch Diamond doesn't use the 3G.

Soxiz said:
I can only select between “Arbejde” and “Internet” which is just to default networks.
Click to expand...
Click to collapse
Select Connect to The Internet

Hey L o r d R a j
The Internet option i am talking about have a description saying that its for use when connection to a VPN connection. My Wifi is active and if i change the setting in the Connection tab to use "Mit Arbejdsnetværk" the wifi works perfect for the browser etc.
Not sure what I or the danish rom i have is doing wrong. But i cant get it to use the wifi if its there, if not use the 3G.
If anyone have any ideas please let me know, thanks
Best regards
Mads

Please Please Please someone respond to wifi connection problems

hello all..ive posted several threads about this..even saw other people having the same problem..
connects to wifi route fine..i have mac address ip..etc says its connected..but thats it..cant do anything else with it..cant connect to internet at all
used the same settings i have with other wm6 unit..it works fine on that..but not my diamond
why why why !!!!!!!
had this damn fone for about 4 months now still cant get it to connect !!!
had wm fones since they first came out...never have i had this problem before

What about DNS??

plasticplanet said:
hello all..ive posted several threads about this..even saw other people having the same problem..
connects to wifi route fine..i have mac address ip..etc says its connected..but thats it..cant do anything else with it..cant connect to internet at all
used the same settings i have with other wm6 unit..it works fine on that..but not my diamond
why why why !!!!!!!
had this damn fone for about 4 months now still cant get it to connect !!!
had wm fones since they first came out...never have i had this problem before
Click to expand...
Click to collapse
If there are other treads about this subject, you should respond in those threads rather that cluttering up this forum.

ref clutter
jmermel said:
If there are other treads about this subject, you should respond in those threads rather that cluttering up this forum.
Click to expand...
Click to collapse
i would but seems like no one has bothered to help out in other threads either

are you sure that you are using the "right" encryption? perhaps you have wpa2
(tkip or aes) and the device checks only wpa? or you enter the wrong password in
wep, then the connection looks like it is established, but you can do nothing with it!
just a thought...

yep
TML1504 said:
are you sure that you are using the "right" encryption? perhaps you have wpa2
(tkip or aes) and the device checks only wpa? or you enter the wrong password in
wep, then the connection looks like it is established, but you can do nothing with it!
just a thought...
Click to expand...
Click to collapse
hello...yep..everything is entered correctly..as i say ive been setting them up for years..this one connects fine..have all the boxes ticked but cant actually use the internet..works fine on all my other wm units

Stupid question tbh but I see this sort of thing every day nearly..
Your subnet is the same as the router yes? Does dhcp allocate one out to you or have u got a static ip on the phone?
Despite being connected to the wifi access without being on the same network you will not gain net access.

Who is your carrier for cell service? If you're on AT&T, and you've run an auto-setup CAB file for your cellular network settings, then you may need to double check your connection and proxy settings. Usually the solution is to select the correct network connection and NOT try to use your carriers proxy when you're connected via Wifi.
If you ARE on AT&T, then do this... Go to Start > Settings > Connections tab > Connections > Advanced tab > Select Networks button. Set both drop down entries to MEdiaNet... for most this will have NO adverse impact (assumes you have a data plan too). OK to save selections.
Now go back to those MEdiaNet drop down selections. Edit either one of them. Go to the Proxy Setting tab. Uncheck the second box indicating this network connection uses a proxy. OK the settings... enjoy non-proxied Internet freedom via Wifi.
If you're not on AT&T, maybe the same proxy issue could be present. But I couldn't help you with your settings. Hope this helps.

ref
hotmail said:
Who is your carrier for cell service? If you're on AT&T, and you've run an auto-setup CAB file for your cellular network settings, then you may need to double check your connection and proxy settings. Usually the solution is to select the correct network connection and NOT try to use your carriers proxy when you're connected via Wifi.
If you ARE on AT&T, then do this... Go to Start > Settings > Connections tab > Connections > Advanced tab > Select Networks button. Set both drop down entries to MEdiaNet... for most this will have NO adverse impact (assumes you have a data plan too). OK to save selections.
Now go back to those MEdiaNet drop down selections. Edit either one of them. Go to the Proxy Setting tab. Uncheck the second box indicating this network connection uses a proxy. OK the settings... enjoy non-proxied Internet freedom via Wifi.
If you're not on AT&T, maybe the same proxy issue could be present. But I couldn't help you with your settings. Hope this helps.
Click to expand...
Click to collapse
hey..thank you for having little think about it..but im in the uk..t-mobile and those settings having nothing to do really with connecting to my wifi at home..except tell my phone it can..which i did..
all the settings are correct...exactly the same settings im using on other wm devices but when they say its connected i can actually do something..rather than on the diamond where it says its connected but doesnt allow me
ive set the phone up identical to another wm6 phone in every way..that connects fine and i can use my wifi ..this phone i cant

Have you tried connecting to a different wifi router, a friend or whatever?
If you can connect there, then that narrows down the problem to your settings, or your router, or the router setup
Do you know anyone else with a Diamond that could try to see if they could connect to your router?
If they can connect but you can't then you could take a look at their connections. Or it could mean a faulty device. If they can't connect either, then this will give you some clues.
I'm assuming that you've deleted the connection and reformed it. Did you choose work or the internet? Have you tried changing that.
Have you tried changing the Authentication to Shared?
Each time you make a change you need to let it 'set' for a few seconds and then reboot.
Can you connect to the internet via Activesync pass-through?
Sorry, that's all I can think of at the moment. If something else occurs to me I'll post back.

Hi.. I'm not sure if this will help or if you already have tried it.
But I had the same problem and the solution was this:
Pres start -> Settings -> Connection -> Wireless Lan -> power mode
Now use best settings, instead of battery save. ( Im not sure if the translation is 100% right. Translated from danish Diamond)
At the start I couldn't load any pages with Wi-fi, though there was no problem with the connection from the router. But now it works like a charm

hey
marisa4755 said:
Have you tried connecting to a different wifi router, a friend or whatever?
If you can connect there, then that narrows down the problem to your settings, or your router, or the router setup
Do you know anyone else with a Diamond that could try to see if they could connect to your router?
If they can connect but you can't then you could take a look at their connections. Or it could mean a faulty device. If they can't connect either, then this will give you some clues.
I'm assuming that you've deleted the connection and reformed it. Did you choose work or the internet? Have you tried changing that.
Have you tried changing the Authentication to Shared?
Each time you make a change you need to let it 'set' for a few seconds and then reboot.
Can you connect to the internet via Activesync pass-through?
Sorry, that's all I can think of at the moment. If something else occurs to me I'll post back.
Click to expand...
Click to collapse
i have tried all except find someone else with a diamond..activesync connects fine and can connect when in sync..as ive said before i have another wm6 device..connects exactly the same way and works fine..this just wont..well connects but doesnt allow me to go any further

yahoooooo or wifiiiiiiiiiiiiiiiiiiiiiiii
BottchDK said:
Hi.. I'm not sure if this will help or if you already have tried it.
But I had the same problem and the solution was this:
Pres start -> Settings -> Connection -> Wireless Lan -> power mode
Now use best settings, instead of battery save. ( Im not sure if the translation is 100% right. Translated from danish Diamond)
At the start I couldn't load any pages with Wi-fi, though there was no problem with the connection from the router. But now it works like a charm
Click to expand...
Click to collapse
well thank you guys very very much...ive used a combination of BottchDK and marisa4755
i removed my wifi connection and forced it to connect from default again..entered my passkey..wacked the old wifi on full power and NOW HAVE WIFI
it does seem devilishly slow though..but think ive read that on some thread before..think will have a looksy about that...
MANY MANY thanks again

Excellent news!

oh no it wasnt actually wifi !!!!!
marisa4755 said:
Excellent news!
Click to expand...
Click to collapse
hey all..sorry but the problem still exists !!!
cant connect..looking at lan settings..
status - Associated to network
it shows connected but status only associated..please tell me when the smeg is going on with this darn diamond before i through it against the wall !!!

This was the solution for me
I have had the same problem Imy phone even should be picked up by the repair centre then as a last try someone gave me the idea to change the leaver at wireless lan/energymodus to the left (best conection) and whala, I have tried it later whit my phone almost on the wirelesspoint to set it to best batterymode but not even at the middle it would do anything, it says conected but no data is comming to the phone, just when the leaver is at his almost left it will work.
Good luck.
Willem

-Have you tried a hard reset? (Data will get lost! Backup first)
-Mac filter activated on the router?

yep tried all
Mr.Eliot said:
-Have you tried a hard reset? (Data will get lost! Backup first)
-Mac filter activated on the router?
Click to expand...
Click to collapse
hello again..yes tried hard reset..have the power set to max..clicked my heals together 3 times also !!!
never in my life have i had such i problem..must have had dozen wm based phones which none of them i had this problem..still have wm2003 unit..wm5 and 6 unit all of which will connect just fine..i dont have the mac filter setup on my router
(

-Have you analyzed your router's log already?
-What is set under Start => Settings => Connections => Connections => Advanced => Choose Networks (translated it, not sure about the exact words)?
-Data connections via UMTS or GPRS do work?
-Go and try another router of a friend or internetcafe.

ive checked
Mr.Eliot said:
-Have you analyzed your router's log already?
-What is set under Start => Settings => Connections => Connections => Advanced => Choose Networks (translated it, not sure about the exact words)?
-Data connections via UMTS or GPRS do work?
-Go and try another router of a friend or internetcafe.
Click to expand...
Click to collapse
yep gprs works fine..looking in the wifi i have all the mac address ip speeds blah blah you could ever wish wish for..just as you would expect if it was connected..which it says it it..but only associated lol

Setting for Tilt Data Plan: KaiserTweak

I just got the data plan and have yet to be able to connect to it? I've tried messing with the KaiserTweak settings. I have data connections enabled. I also enabled leave connection always on but that gave me the connection is not active icon. When I disable that function all I get at the top of the screen is an "H". What do the settings need to be in order to get the data connection properly functioning? I've yet to see the connection is active icon up top.

Update
I am able to update the weather on the HTC home page I'm using by enabling the data connection on all the time but the browsers still do not connect. I also don't see the active data connection icon.

did you uncheck proxy ? if not , do so

Proxy is already unchecked.

You do have a data connection the H means = HSDPA
(Like a 3G connection but faster)
http://en.wikipedia.org/wiki/HSDPA

Also try refreshing your settings (This works for me... and it's annoying!)
Start>Settings>Connections>Connections>Manage my existing connections.
Then "Next" thru all the settings until you get to the end. Press Finish. The data connection drops and the re-establishes.
See if your browser then works.

When I follow that path under connections I don't see a manage my connections option. All I see is "My work network" with 3 options under that. Add Modem, add vpn server and set up proxy.

Try this
Try these files. I use them whenever I flash a new rom and haven't had any trouble connecting since then.
One has all the medianet/isp settings and the other is for mms. I know you didn't say you have a problem with mms, but just in case
Just run and reset and everything should work.

Thanks, I'll have to try those when I get home. The browsers do connect to Wifi with no issues. Could there be a conflict with that? When there is wifi connection available which connection will it grab onto? Wifi of MediaNet? Those files won't affect the current wifi settings used to connect will it?

FuSchnickens said:
Thanks, I'll have to try those when I get home. The browsers do connect to Wifi with no issues. Could there be a conflict with that? When there is wifi connection available which connection will it grab onto? Wifi of MediaNet? Those files won't affect the current wifi settings used to connect will it?
Click to expand...
Click to collapse
I've never had them interfere with WiFi since I use WiFi at home and MediaNet at work.
The settings cab is a pretty simple cab, it really just fills out all the information in the boxes to set up the connections but it saves a lot of time and gets everything right, for me at least, in one shot.
Let me know how it goes.

I tried those cabs and I still can't get any of the browsers to work. Nor my email. I keep getting a connect connect message. Anyone know the proper settings to get the browsers to work? However the weather is able to update on my HTC home page.

i dont nknow if youve tried this but everytime i flash a new rom i have to do this or ill have the same problem.. in your connections settings go through the meus until you find this device connects to: and by default it should say the internet.. but you have to select media net (att right?) cus thats the only way apparently media net is not the same as the internet!
ex: go to setings > connections > connections (icon) > advanced > select networks > "programs that automatically connect to the internet should connect using: and itll probably be set to my isp and you ewant it on MEdia net

Wi-fi/imternet toggle

I am an amatuer with xda, as well as my pocket pc (I have the htc fuze{touch pro for att}), however I enjoy both and am learning more and more all the time about both. However I have not been able to find this, and was wondering if such a thing existed: a program to toggle between wi-fi and internet for other programs. You see, I don't have a data package, and don't like to pay for the internet. So I was just wondering if anyone knew of a toggle for something like that.

I'm in the same boat. I use this, and have it mapped to the PTT button. Works great.

I cliked the icon and it turned on my wifi. Is that all it does?

nbower said:
I cliked the icon and it turned on my wifi. Is that all it does?
Click to expand...
Click to collapse
Isn't that all you wanted?

DrzNight said:
Isn't that all you wanted?
Click to expand...
Click to collapse
Not really, don't get me wrong, I will use that app on my ptt button too because it is very useful, but I was looking for an app to change other programs kind of. It seems like other functions on the phone, such as downloading a MMS, or updating your email inbox require the internet. I didin't know if stuff like tat could be changed to wi-fi instead of the data connection

Well the best solution I know of would be to use Modaco's NoData (attached) which will disable any kind of data connection. Another thing I personally do is to go into the "Phone" settings and then "Bands" and select "GSM" for the top box and "Auto" for the bottom box. Basically that turns off 3G.
If you are connected via Wifi the Wifi connection will take priority over any other connection. So whenever I want to check my email for instance, I push the PTT button to turn on Wifi and then send/recieve and no data is used.
Hope that helps!

Eric03 said:
Well the best solution I know of would be to use Modaco's NoData (attached) which will disable any kind of data connection. Another thing I personally do is to go into the "Phone" settings and then "Bands" and select "GSM" for the top box and "Auto" for the bottom box. Basically that turns off 3G.
If you are connected via Wifi the Wifi connection will take priority over any other connection. So whenever I want to check my email for instance, I push the PTT button to turn on Wifi and then send/recieve and no data is used.
Hope that helps!
Click to expand...
Click to collapse
Yeah, that does, thanks a lot!

My experience with nodata have not been all that good. Since the wifi reciver is pretty weak I find that if I fall out of wifi cover the phone will connect with 3g even if I'm running nodata.
If anyone know about a program that both activates wifi AND deactivate all other means of internett connections that would be great. I'd rather surf for free on a wifi connection that have a low signal than to pay for surfing with 3g.

I'am also searching for such a solution. I use Exchange server sync for my contacts and appointments. This sync should not go over the Mobile Internet connection, i need it only in our intranet by using WLAN/WiFi
Regardless if WIfi is enabled or not: The Touch Pro tries to connect by Mobile Internet to the Intranet-Server(!), this fails, of course. When i disable the Mobile data connection on the connections settings tab, anything is fine.
In the advanced settings of the exchange server config, i found a drop down box for the connection. But all it shows is "Internet" meaning the mobile connection. The office/business connection (=intranet config) is not available there...