New XDA Stellar Handset = Problems - Tilt, TyTN II, MDA Vario III General

Ok i just bought a new XDA Stellar Handset yesterday and i have encountered some problems, which may be due to my lack of knowledge for smart phones like this one. And here are my problems:
1) My contacts on my sim and my main contacts list is merged and i have doubles of every contact
2) When i use Microsoft active sync it always encounters a problem with the support code:85010014
3) From time to time my device will not access internet even though i am connected using WiFi and i have a connection showing on the settings for both Wifi and WLAN.
Please help me if you can. This is literally the first time ive used this kind of device and im worried that i may have made the wrong choice but with your help maybe i will think otherwise

Well, since your new, you need some tools. Best tool
1) Use AdvancedConfig to correct this.
2) Try this
3) I've never had this issue before, so I don't know. But search for it and you'll find the answer.
Hope it helped.

3) happens to me on some routers........goes away when i change the wifi power level to best performance

To: grandpereza
Thanks, im trying to act on number 2, but for number 1 how do i access the advance control??
To: XtreMe_G
Thanks its working at the moment but when it goes down ill try your idea

I'm not going to give you the link to it, however I'll point you in the right direction. Self reliance is an important thing. I'm not trying to be a ****, but it will save you from being chastised later.
Search for AdvancedConfigusing the google link in my earlier post.

Related

Pocket Internet Explorer won't work on Tilt

Hi everyone,
I've been searching for a solution for my problem on here through the forum's search and the Google search all day but haven't found one yet so I'm finally throwing my hands up in frustration and posting hoping that some of the very talented and kind folks online can help me out.
I bought an AT&T Tilt last month and the pocket IE worked fine on it when I was using it with AT&T in Northern California. I am using Dutty's WM6 rom and the .17 radio.
I then flew out to Islamabad, Pakistan where I am currently staying. I used the SIM-unlocker found on this forum and everything seemed ok. Pocket IE continued to work on my network here (Mobilink, they have GPRS and EDGE). Then suddenly 2 weeks ago, pocket IE stopped working. Now whenever I try to load a page in it, it just gets stuck at "Locating" and the animation looking for the website keeps going in circles. It never finds the site. I've tried all kinds of different websites and always no luck.
At the same time, Opera works 100% without any sort of problem. Also I am able to use the built-in WM6 e-mail manager to check my Gmail over IMAP over the same GPRS/EDGE connection so I know my connection is fine. Pocket IE still doesn't work. I checked in connection settings to make sure there was no proxy enabled, that both my networks were set to my provider (mobilink)'s connection settings and I double-checked my connection settings with my provider. I feel as if it isn't their fault since all my colleagues are able to use their phones and the Internet and even on my device, the other applications such as Opera and built-in mail work. I also downloaded the Gmail java applet and even that works perfectly.
I'm at my wit's end about what I should do or try that could make a difference and I would sincerely appreciate any help anyone can offer. I've heard of a disablehiddenproxy option but have so far been unable to find that .cab file anywhere that I could download it...and I'm not sure if that fix would apply for me since I am no longer using the AT&T/Cingular network.
Please help! Thank you for taking the time to read this.
Hi,
I'm back with a solution to my own problem, it seems!
I did find the disablehiddenproxy.cab here and installed it.
I then did a soft reset (pushed the stylus into the little reset hole) and when the phone turned back on, pocket internet explorer is once again working perfectly.
Thank you XDA developers for providing all this information for free!
thanks - you just saved my day.
i was clueless to why my PIE didnt work all of a sudden - and now it works again...
Gas Addict said:
Hi,
I'm back with a solution to my own problem, it seems!
I did find the disablehiddenproxy.cab here and installed it.
I then did a soft reset (pushed the stylus into the little reset hole) and when the phone turned back on, pocket internet explorer is once again working perfectly.
Thank you XDA developers for providing all this information for free!
Click to expand...
Click to collapse
Thanks a million, I got a Tilt to work on Rogers network and everything worked except for IE
this fixed it and now I got it all - awesome
Hi Everybody,,having problems with 3G speed and can't figure out why?
I am in Calgary, with HTC Tytn that I have had for 1 1/2 years. Ever since I could see them experimenting with 3G (could see the icon) I was waiting for the day that I could see the benefits of 3G. Well,, my speed of download is miserable, even with full 3G bars. I have all the proper icons showing up on top, 3G,, and when downloading internet page I see the H icon appear. An aquaintance in Winnipeg, said that he almost gets Wifi speed with 3G.. I have put a new sim card (thought that might be a reason,because it was out of my old blackberry). I am really depressed ,especially when I went to download an internet page on a demo iPhone and was blown away by the speed, which I don't have. I now hve Schaps 4.31 and Radio 1.51,, and basically,since owning the unit have never had the speed. Can anyone possibly help me figure out what is wrong? Perhaps over chat, skype? I have always used Lurch's settings whenever I put in a new Rom, and I feel that all HSDPA is enabled through Schaps config, and elsewhere. Any help would be most welcome. I still love my TyTN,, Thanks for any help you can give to me. I have of course IE browser, but also Opera
worked for me too
But what the heck caused it in the first place.
Gas Addict said:
Hi,
I'm back with a solution to my own problem, it seems!
I did find the disablehiddenproxy.cab here and installed it.
I then did a soft reset (pushed the stylus into the little reset hole) and when the phone turned back on, pocket internet explorer is once again working perfectly.
Thank you XDA developers for providing all this information for free!
Click to expand...
Click to collapse
Wowwww....Thank you so much for the solution mate. Saved me a lot of time. You are awesome!!!
awesome, thanks!
That does fix it for me as well.
Thanks
You just saved me to. PIE stopped working for no reason a few months back. I have been looking for a fix without sucess untill now. Thanks once again!
Gas Addict - another thank you - worked like a charm.
For my education - can anyone explain the hidden proxy issue.
What is it? where did it come from? and where did it go to? and why was the problem intermittent? PIE locked only 80% of the time - sometimes it worked OK only to fail again... Tks again
The hidden proxy, is exactly what is says it is...A hidden proxy. The proxy allows AT&T users to connect to medianet services via their phone's internet connection. If you disable the proxy you will not be able to connect to medianet services (such as typing "home" and it takes you to AT&T's medianet site).
If you are not using AT&T then you should have it disabled in the first place. My guess is that some piece of software enabled the this proxy somehow. All the cab does is reset IE to autodetect if there is a proxy, which can also be done in Kaisertweaks.
Nothing too exciting to reveal, but since all you guys wondered what it did, i thought i'd look and let you know. It's just a provisional xml file that inputs some settings and registry edits.
Did you mean "If you are not using AT&T then you should have it DISabled in the first place"?
djmaven said:
Did you mean "If you are not using AT&T then you should have it DISabled in the first place"?
Click to expand...
Click to collapse
yes, that is what i meant
It is fixed
Thank you for the CAB file. The file fixed my IE issue on unlocked ATT Tilt on Rogers Network.
Pocket IE back in line
No idea why my PocketInternetExplorer could all of a sudden only open locally stored .htm files, but nothing on internet anymore. OperaMini 4, OperaMobile 10 and SkyFire browsers continued working without any problem.
A few applications rely on a functioning PIE, so could not be used as a result.
Luckily this .CAB did the trick for me too, many thanks Gass Addict!
Gas Addict said:
Hi,
I'm back with a solution to my own problem, it seems!
I did find the disablehiddenproxy.cab here and installed it.
I then did a soft reset (pushed the stylus into the little reset hole) and when the phone turned back on, pocket internet explorer is once again working perfectly.
Thank you XDA developers for providing all this information for free!
Click to expand...
Click to collapse
Worked like a charm - Thanks
/S/

Issues with Phoning

Hi,
I'm a "proud" owner of a TyTn2, tho there are several issues I'm bothered with:
- Sometimes when I phone someone and me or the other side hangs up, the phone application just hangs and doesn't want to exit. Nothing besides a reset resolves this.
- Related to the previous: I notice in a task manager tool I downloaded recently that some calls keep the phone application open, even after call ending. When I try to close the program the task manager tool refuses and tells me he can't.
- Quite often when someone tries to call me, they get no response and the number is not available. This in times when I even have full network.
So ofc my question is: are these known problems? if so.. are there any solutions?
Thanks, kind regards,
DJM
Since this is your first post - I will make some assumptions -
1. you have a stock phone
2. you most likely got it from AT&T
3. you are a bit of a geek - hence your visit to this forum.
4. you have already searched this forum and have not found any threads that mention any of your issues. (Because creating a new thread without reading first generally will require asbestos undershorts)
Based on the above assumptions I woul make the following statements:
1. this is not normal or acceptable behavior
2. since this is a new phone I would not mess around with it for long - I would take it back to the store and tell them the issues and have them fix/replace the phone.
A phones first and formemost job is to make phone calls and receive them - if it fails there it does not matter how well it can GPS or play music.
Bill
well yeh it's a stock phone from a company in holland (vodafone)
been considering returning it... altho the best pda shop in holland tech support said it's a common problem with windows mobile..tho he didn't know if there was any fix..
hence my coming here.. I tried searching yes by search function and by hand

Installed and Uninstalled "WeFI" and now my WiFi won't auto connect.

Hello Everyone.
I'm new to the forum and this is my first post, although have been reading and applying a lot of knowledge you guys have! the forum is great!
Anyway, I have an unlocked HTC TyTN II, everything worked fine and I overall very satisfied with the device...
I made a foolish thing! I installed the "Wefi" utility and after playing with it for a little while, I didn't like the thing.. so, I decided to uninstall it.. however, now I find that my kaiser cannot longer connect automatically to my wireless networks after resume.. Now I only get the notification that it has found available wireless networks and, even though I chose not to show the message anymore, it does it every time, and when it does not, the phone doesn't connect to my WiFi.. so I need to do it manually... which is very annoying..
I already restored original registry keys under HLM\Comm\TNETW12511\Parms with no luck so far...
What can I do?... I'm still on the original WM 6.0, have not loaded any ROM changes yet..
Your help would be highly appreciated.
Thanks!
Oscar
Fix for auto connect problem after removing WeFi
My name is Galia Finkelstein and I work at the support desk at WeFi. This doesn't happen anymore on the new version that's been released so for the older version we have a version fix for the problem with the automatic connection, just run this file and you should be good to go http://wefi.com/static/RestoreZCAutoConnect.exe
If I can assist with anything else please drop me a line at [email protected].
WeFi post-uninstall problems
Hi!
I am sufferring from the same problems as "obadillo" - see above.
I downloaded and installed the latest version of WeFi, but after a couple of days of use, I found that I didn't like it, and it also took up too much of my valuable "today" screen space.
After uninstalling, I found that firstly, all my previous wi-fi settings had been lost (WEP keys for my home network, my work network etc etc), and secondly, even after re-enterring these details, my device (HTC Touch UK Version - Orange UK) - (running WM6 Pro) refused to auto-connect when I switch the WiFi on.
After reading the reply from Galia (directly above my post), I downloaded and ran the executable, but found that it made no difference.
Any ideas anyone? I did email Wefi's support email address, but as yet have received no reply.
Thanks in advance!
I have also tried this fix with no success (running WM5). I have also sent an email to wefi support. No response. I would recommend you stay away from this software.
We-Fi Latest Version
I have found a (kind of) solution! I have installed the latest version of We-Fi (downloaded from their website), and then DEselected it in my Today programs. So even though its not in use, its wifi parameters still overrule the PPCs local params. This seems to allow me to switch on and off WiFi WITHOUT using the WeFi software, and it now autoconnects, even with the several wireless networks I have stored, whenever I switch WiFi on, it may take a few seconds to connect, but it now does every time.
Not the greatest "solution", but at least the problem is partially solved.
But as the good man above says, unless you're VERY sure you want to install WeFi, do not install, because you will lose ALL preexisiting WiFi connections and settings etc..
Have a good one!
-=namwollem=-
Hello again, XDA devs!
I also had the problem and I'm struggling with Amir, some guy from the WeFi staff, to get the problem solved or at least recognized.
I left a complete description on my blog with links to people having problems. Here's the article (without links):
Before you consider installing WeFi on your Windows Mobile device, you might want to read this cautiously and save yourself some problems.
If you have not yet tried it, you're not missing much. Although promising, the app takes over your device. It controls your today screen, messes up your wi-fi parameters and some rarer stability issues were also reported.
First, the app needs .Net CF v.2.0, something that takes space and puts more useless crap on your device. Then the app doesn't just find networks and connect to them. Instead it overrides your wi-fi parameters and inserts its own code, thus the uninstallation problems. WeFi also takes a lot of your today screen's estate for basically nothing. How much screen space? Take a look.
Upon uninstalling it, many noticed their devices stopped automatically connecting to wireless networks, among other, rarer problems. The only known fix to the problem is to hard-reset your device and to stay the **** away from this app. We also saw a link to a .exe file somewhere but no one left feedback about it so we assume it's just as good as WeFi. You might also reinstall it, hide it and use it to take care of the wi-fi stuff or go in Settings>Connections>Wi-Fi everytime to select a network to connect to.
The developers were quick to comment about the problem and said they are working on it (see the first comment to this post). However their product page doesn't mention the problem yet and people still get caught. I left them feedback about *some* of the concerned device, assuming it's not all of them, hoping for a change. Feel free to do the same and put some pressure on these guys too.
You might also read one of those threads and see for yourself.
-Nico
Click to expand...
Click to collapse
Full article: http://nicbou.com/2008/07/09/do-not-install…-you-pocket-pcdo-not-install-wefi-on-you-pocket-pc/
I'm trying to get the warning to reach all the download spots, if you guys feel like helping. This is just unacceptable, let's do something about it!
Haim head of WeFi Windows Mobile development team here
Hello all,
First, let me assure you all that we are doing our best to solve any user problem as quickly as possible.
Out of the thousands of mobile users we have, there are really only a few users who complained about this problem.
We released a fix that you can find in: http://www.wefi.com/download/client/RestoreZCAutoConnect.exe
which after executing and doing soft reset should solve the problem.
As our support team explained to “primemaps” via e-mails (sent in 08/07) this fix only works if you uninstall WeFi first.
What you are all describing is that ZeroConfig stopped auto connecting.
By avoiding the manipulation of ZeroConfig default timeouts in our next version (which should be released in about 2 weeks from now), this should not happen anymore.
If this does not help you or you have encountered any other problem – please send me an email to [email protected] and I promise a fast response,
it would help if you mentioned your WeFi version, Device model and ActiveSync version.
I hope you would all choose to install our next version and enjoy the many benefits it can bring you.
Haim
Can't work with it and can't work without it
With my HTC TyTN II I had similar problems as others have described, or maybe even worse: I could no longer work to any wireless networks. It would disconnect in less than one second every time.
I did a hard reset and that didn't work!
I also tried the "fix" the WeFi representative suggested but that didn't help at all either.
What finally helped me was Namwollem's solution: Install WeFi again and removed it from the Today screen (but kept it installed).
I can't help wonder if WeFi changes something in the ROM since a hard reset didn't even fix it.
One of these days I will have to install the ROM all over and see if it makes a difference, but I wish I could avoid that!
I hope others won't be stupid like me and install this #$%[email protected]#&$ software!
Nothing helps for my Diamond to restore Wifi signal
I have Htc diamond with newest Rom downloaded from htc.com.
My problem is that since i installed aplication WEFI(older version) and uninstalled it, i cannot see ANY available wifi networks.. I tried alot of things. I tried soft reset, hard reset, i installed WEFI (newest version) , in moments wifi works and shows available networks and i can connect, but after it doesnt work again.. I would say it shows networks only ocasionally(even if im always surrounded by at least 10 hotspots). I installed newest Rom again, i installed old official ROM, i always put mamximum performance instead of battery, and still i have no results/cannot see ANY available networks). I have a feeling like i really have a hardware problem with wifi now..But again i think whatever it is its caused by this aplication WEFI. Does anylone have any ideas? i saw some Rafael radio ROM , maybe i can try to install that?
Thanks
AArrrggghh!
This god-awful program rears its ugly head again! I have solved the problem totally now by getting a new handset!! Now I have my Touch HD (Blackstone), one thing I WILL NOT do is install this garbage!! A quick search thru the forums here will reveal a small and very useful program which will with one click switch-on WiFi (and auto connect to the signal it finds if stored in your preferred networks) and with another click will switch WiFi off! Its called AKWifiToggle, and while no where near as fancy as WeFi, IT WORKS and DOESN'T MUCK UP YOUR PHONE!!!

[Q] Internet connection doesn't work at times

At various points my Focus S seems to lose the ability to use it's data connection- either Wifi or 3G. I can't work out why- has anyone else experienced this? Web pages don't load, etc.
I installed a patch that allowed me to use Internet Sharing, I'm concerned this might have been the cause of it...
I've found that if I do not reboot my phone at least once a day I get random problems like that.
untogether said:
At various points my Focus S seems to lose the ability to use it's data connection- either Wifi or 3G. I can't work out why- has anyone else experienced this? Web pages don't load, etc.
I installed a patch that allowed me to use Internet Sharing, I'm concerned this might have been the cause of it...
Click to expand...
Click to collapse
I don't reboot my phone all that often. I've never seen it lose ALL data connection capability tho...
A regular power cycle doesn't hurt tho...
Can this be the issue?
I'm experiencing the same thing, but mainly when I'm connected to 3G. My phone shows it has full bars and 3G or 4G availability but I find 60% of the time my phone has little to no data going to my phone, so none of my apps or news feeds get updated or they get updated slowly. When I'm on wifi the phone works flawlessly.
I read this article,
http://pocketnow.com/windows-phone/hack-fixes-mms-on-unlocked-samsung-wp7-handsets
One of the odder quirks of Windows Phone 7 to appear since the platform's launch has been the absence of Automatic Data Configuration for users who swap SIM chips and network-hop with their unlocked handsets.
ADC should let the phone communicate with the network it's connected to in order to retrieve all the settings it needs in order to use the network's services. Samsung defended disabling ADC by saying that its phones are intended to only be used with a specific carrier
Now I know this is talking about MMS, but does anyone think it's related to 3G connectivity from a different service provider?
i am having the same problem, it started 2 days ago after i unlocked my phone, at&t gave me the unlock code, i had to enable hot spot & de brand by loading a file, i don't have problem with WiFi just 4G, it will be fixed if i re start the phone.
problem for me with wifi+3G
Not sure if this is the same as the OP. I run with both WiFi and 3G enabled most of the time. Basically everything will be working fine for a while, then I'll try to open a web page from Twitter and it will time out. Sometimes retrying will work, but it will take an abnormally long time to load the page. Other times it never works, and when I go to another app (e.g. mail) and try to sync, and that will also time out. When that happens I usually turn off either WiFi or 3G, then toggle the state of the one I left on (e.g. turn 3G off, then back on), and it clears up. I've never needed to reboot the phone. I don't have ICS enabled, but my phone is fully unlocked.
I've guessed this problem was caused by a lost or bad connection on one of the wireless protocols (like WiFi), where the phone thinks it is connected to WiFi and won't switch over to the other protocol (3G).
One more thing: I'm running 8107 and I don't remember this issue occurring before the upgrade.
M
mlekas said:
Not sure if this is the same as the OP. I run with both WiFi and 3G enabled most of the time. Basically everything will be working fine for a while, then I'll try to open a web page from Twitter and it will time out. Sometimes retrying will work, but it will take an abnormally long time to load the page. Other times it never works, and when I go to another app (e.g. mail) and try to sync, and that will also time out. When that happens I usually turn off either WiFi or 3G, then toggle the state of the one I left on (e.g. turn 3G off, then back on), and it clears up. I've never needed to reboot the phone. I don't have ICS enabled, but my phone is fully unlocked.
I've guessed this problem was caused by a lost or bad connection on one of the wireless protocols (like WiFi), where the phone thinks it is connected to WiFi and won't switch over to the other protocol (3G).
One more thing: I'm running 8107 and I don't remember this issue occurring before the upgrade.
M
Click to expand...
Click to collapse
I have the EXACT same issue as you state here. The problem has existed since day one with this phone. I updated through to 8107 and the issues still exist.
So now for some interesting/good news... my dad works for a large company that has direct access to AT&T Wireless Engineers, so he got in contact with an an engineer and explained this issue as both him and I experience the same issues. The engineer was able to get a hold of a Samsung Focus S and experienced the same problems for himself. He then escalated the issue directly to Samsung who in-turn escalated this to Microsoft. Apparently Microsoft claimed the issue was theirs and they are now working on an update to rectify the problem. Samsung also apparently has some updates that they were going to push but have since held off on pushing them until Microsoft has the fix for this data issue fixed.
I've been so frustrated by these issues and the lack of information regarding them that I thought you might be interested in knowing that Samsung, Microsoft, and AT&T ARE working to get the problem resolved.
Wow! This is really great news as I am having the exact same problem. I usually just on and back off Airplane mode and that fixes it, but its a real hassle. So, the word is that Samsung is, possibly, combining all the current issues like this data, the extra settings/quirky display, and the 8107/disappearing keyboard all in to one?
matt
The AT&T engineer didn't say what was going to be included in the Samsung update, just that Samsung was holding off on releasing the update until after Microsoft supplied a fix for the data issues. Hopefully Samsung's update fixes all of the Focus S quirks (data issues, delayed keyboard sounds, quirky display/auto brightness) in one shot.
Thanks for posting this, i feel better that Microsoft & Samsung are working on fixing this issue.
Any updates/news about this specific issue? I have the exact issue with my Focus S since I got my phone
I too have been having this issue and still haven't found a solution. I hope Samsung and Microsoft come up with a solution soon because it is very irritating.
Keep this post updated
trupajay said:
I too have been having this issue and still haven't found a solution. I hope Samsung and Microsoft come up with a solution soon because it is very irritating.
Keep this post updated
Click to expand...
Click to collapse
Am I mistaken...but the majority of people posting in this thread, have the problem after installing something non standard?
8107 is not released by Samsung/AT&T, so the possibility that an associated file is not included, does exist.
Was the hotspot patch and official release, or was it intended for sideload or something?
I'm just curious. I had the luxary to have my Dell Venue Pro sent to Microsoft and examined by the Test and OEM team for WP. This was several months ago. They were able to determine I had used the force update trick to update my Device. From pieces of various emails, I was able determine the update included multiple files. The multiple files consisted of Device specific instructions and additional files needed for the that operator, in addition to the Update provided by MS.
If this is the case, forcing an update into place may indeed load the update, but it might not include other needed files.
Now, I'm not an expert, a dev or anything else important. I cannot validate that what I said is true. But, i do have the benefit of having my older device looked at by MS several months ago. This does not prove 2+2=4. But it does raise enough doubt in my mind that I won't be foruce updating my devices until alot more people get a look at this methodology and perhaps come up with some answers, or at least explanations.
Does the internet connection issue appear only after the forced 8107 update?
I had been using a Chevron-unlocked Samsung Focus S on the 7720 and had experienced no issues. Just updated to 8107 following Heathcliff74's method so I hope this issue doesn't start to plague me.
Also, has anyone had success with voluptuary's wifi internet connection sharing and interop-unlock method? I am hesitant to apply that hack exactly because of worries about issues with internet...
I'm a big chicken. I am just going to wait for AT&T to release the update. I just have this funny feeling that there's a little something extra included with the at&t update. I've done plenty of customizing over the years, but just have a feeling about this. I do wish they would step on it, though.
matt
Sent from my SGH-i937 using XDA Windows Phone 7 App
Extra as in something to block out interop unlocks (bad) or firmware updates (good)? Definitely hoping for a camera firmware upgrade.....
armodons said:
Extra as in something to block out interop unlocks (bad) or firmware updates (good)? Definitely hoping for to get a camera firmware upgrade.....
Click to expand...
Click to collapse
when I said extra, I meant a focus s specific file that might act as a customization or configuration file. I don't think a block file of any sort might be included. But I do know that at&t is proprietary enough to want a unique identifier of some sort. In Gen 1, at&t had special builds just for them, turning on or off features. I know the hd7 had a specific 'config' type file, as did the venue pro. Would I call these extra files? No. I would call them required files. Build 8107 was a single build for WP. Do you think that all phones with mango had the same needs, samex files, same configs? Or is it possible that a related file acted as a config or control.
I'm not smart enough to know for sure. My gut says...maybe. .
Same Problem
Any news on this? I am having the same issue on my Focus S
gravitynoise said:
Any news on this? I am having the same issue on my Focus S
Click to expand...
Click to collapse
We just need AT&T to release the update. That's all. Rumor is all comes with the Tango update.
matt
Sent from my SGH-i937 using XDA Windows Phone 7 App
I hope so. Thanks for the fast response

Force Enable Internet Connection Sharing

Hey, everyone.
I just bought an ATT Samsung Focus S i937 off of eBay. It was locked when I received it, so I plunked down 25 bucks and unlocked it. I'm using it on Telus and so far all is well, except for WiFi connection sharing/tethering.
When I try to enable internet sharing, I get a message saying "Connection not shared. To enable tethering on this device go to (ATT's website) or dial 611."
Basically, it sounds like I need to have an ATT tethering plan to enable this on my phone, but since I'm not an ATT customer, there's not mch I can do.
I was wondering if there is a workaround for this. Please let me know!
Thanks,
Taylor
TaylorofCanada said:
Hey, everyone.
I just bought an ATT Samsung Focus S i937 off of eBay. It was locked when I received it, so I plunked down 25 bucks and unlocked it. I'm using it on Telus and so far all is well, except for WiFi connection sharing/tethering.
When I try to enable internet sharing, I get a message saying "Connection not shared. To enable tethering on this device go to (ATT's website) or dial 611."
Basically, it sounds like I need to have an ATT tethering plan to enable this on my phone, but since I'm not an ATT customer, there's not mch I can do.
I was wondering if there is a workaround for this. Please let me know!
Thanks,
Taylor
Click to expand...
Click to collapse
firstly DO NOT INSTALL THE SAMSUNG UPDATE!! and if updating the OSan have it unlocked already read This Website and use the relock prevent + edit your hosts file
Absolutely back up your device at every stage using This Guide
So follow these steps
unlock the device Here follow the instructions which includes installing the diagnostic tool and install XAP deployer or XAP handler Here or Here With the XAP file deployer in the WP7 SDK
Then install WP7 Root Tools Here
Then install WP Bazaar market Here
Open Root Tools, and give Bazaar higher level privileges
Find WinTT on the Bazaar market and install it
Open Root Tools, and give WinTT higher level privileges
you may need to restart to get WinTT working
go through WinTT and turn on ICS
Done
Wow thanks.
That's very complete. One questions though... I didn't mention this, but I am a registered WP7 dev and can unlock this device using my dev access. Can I load any of the XAPs directly instead of having to crack my phone?
Thanks,
Taylor
Yeah, you have limited access to installing xaps, but you will still need to interop unlock and use root tools to give higher level access to WinTT, so your best starting from scratch,
Sent from my SGH-i937 using XDA Windows Phone 7 App
Unable to understand the process
I have purchased an Samsung Focus S i937 locked to AT&T. I have purchased an unlock code and have successfully unlocked my phone. Im also unable to use the Internet Sharing feature of my phone. Firstly, I am not a technical guy hence im unable to understand the process stated by you. Secondly, I wanted to find out that does following the process given by you, expose my device to get BRICKED as I am able to understand that involved a JAIL BREAK of the device. Does it have any other side effects.? Like effecting the radio signals or any other such problem.
Thanks
abhijeetmohan06 said:
I have purchased an Samsung Focus S i937 locked to AT&T. I have purchased an unlock code and have successfully unlocked my phone. Im also unable to use the Internet Sharing feature of my phone. Firstly, I am not a technical guy hence im unable to understand the process stated by you. Secondly, I wanted to find out that does following the process given by you, expose my device to get BRICKED as I am able to understand that involved a JAIL BREAK of the device. Does it have any other side effects.? Like effecting the radio signals or any other such problem.
Thanks
Click to expand...
Click to collapse
ok, first things first.
You won't brick your device, at worst a hardrest all remove all changes you can do, our device, the focus S, isn't fully unlocked, so there are limitations to the amount of damage you can do by arseing it up. With that behind us you have to learn what you are about to do, there isn't a simple way.
So, start by knowing these basics, then read through the guide, any bits you don't understand feel free to ask.
1, AT&T locked your internet connection sharing, so you must re enable that
2, To enable ICS, you must make changes to the registry
3, Microsoft locked you out of making changes to the registry, so you must gain access to do it
4, AT&T left a security hole allowing us to make changes to allow us to change things like registry
5, using that hole we can install software that will give us more access, that software can then allow us to remove the AT&T lock on ics
These things you must do, there is no magic answer, there has been some short cuts made but this in some cases has had a negative effect, such as losing 3g, doing as I said will not have any effect on your signal or anything else
Sent from my Samsung Focus S using XDA Windows Phone 7 App
Have you guys noticed any of the following....
issues after the above procedures were applied (a big thanks to all the brainiacs who know how to hack this stuff):
Slowed Internet Connection
Lower Strength of GPS Signal
Less accuracy and trouble sometime finding location
Less accuracy while using maps because of the above statement
Not complaining, just curious. Thanks to all.:good:
7carisfast said:
issues after the above procedures were applied (a big thanks to all the brainiacs who know how to hack this stuff):
Slowed Internet Connection
Lower Strength of GPS Signal
Less accuracy and trouble sometime finding location
Less accuracy while using maps because of the above statement
Not complaining, just curious. Thanks to all.:good:
Click to expand...
Click to collapse
theres nothing in the code that should have done that, the XML import only fiddles with interop unlock
im not 100% sure what WTT changes but I know the entries it should be fiddling with and shouldnt make any difference, although its been suggested the ICS code does mess with the 3G signal ive not heard anything at all to suggest that it effects GPS as well.
See This Thread for details, ive copied the relevant bits here but all thanks should go to those on the original thread
Option 1
---- 11.3. If your device is not locked to a specific operator, you can use the Samsung Network Profile app (for 1st generation) or Wireless Manager (for 2nd generation)
-------- 11.3.1. Uninstall the Samsung Network Profile / Wireless Manager app.
-------- 11.3.2. Download and install the latest version of the Samsung Network Profile / Wireless Manager app from the Marketplace.
-------- 11.3.3. Open the Samsung Network Profile / Wireless Manager app.
-------- 11.3.4. Select a different Network Operator.
-------- 11.3.5. Now Select your own Network Operator again.
-------- 11.3.6. Exit the Network Profile / Wireless Manager app.
Option 2
Resolve Samsung connection problems
A lot of Samsung owners have complained here about connection problems. They blamed Interop Unlock, but apparently this has more to do with enabling "Internet Connection Sharing" than with "Interop Unlock". You should be able to recover the connection, apply this:
1. Start Diagnosis App> *#32489# ***DOES NOT WORK ON i937***
2. Tap "Back" 2 times to go back to Phone Control
3. Choose: [7] Network Control
4. Choose: [1] GFC
5. Choose: [3] Setting Cancellation
Wait for it to say success, then reboot.
GPS is a completely passive function, I don't have a problem with this, HSDPA may have issues for reasons unknown but using this method doesn't effect mine, perhaps its carrier specific..
dazza9075 said:
theres nothing in the code that should have done that, the XML import only fiddles with interop unlock
im not 100% sure what WTT changes but I know the entries it should be fiddling with and shouldnt make any difference, although its been suggested the ICS code does mess with the 3G signal ive not heard anything at all to suggest that it effects GPS as well.
See This Thread for details, ive copied the relevant bits here but all thanks should go to those on the original thread
Option 1
---- 11.3. If your device is not locked to a specific operator, you can use the Samsung Network Profile app (for 1st generation) or Wireless Manager (for 2nd generation)
-------- 11.3.1. Uninstall the Samsung Network Profile / Wireless Manager app.
-------- 11.3.2. Download and install the latest version of the Samsung Network Profile / Wireless Manager app from the Marketplace.
-------- 11.3.3. Open the Samsung Network Profile / Wireless Manager app.
-------- 11.3.4. Select a different Network Operator.
-------- 11.3.5. Now Select your own Network Operator again.
-------- 11.3.6. Exit the Network Profile / Wireless Manager app.
Option 2
Resolve Samsung connection problems
A lot of Samsung owners have complained here about connection problems. They blamed Interop Unlock, but apparently this has more to do with enabling "Internet Connection Sharing" than with "Interop Unlock". You should be able to recover the connection, apply this:
1. Start Diagnosis App> *#32489#
2. Tap "Back" 2 times to go back to Phone Control
3. Choose: [7] Network Control
4. Choose: [1] GFC
5. Choose: [3] Setting Cancellation
Wait for it to say success, then reboot.
GPS is a completely passive function, I don't have a problem with this, HSDPA may have issues for reasons unknown but using this method doesn't effect mine, perhaps its carrier specific..
Click to expand...
Click to collapse
Thanks for the info. I'll see if it helps. Just as FYI, the code *#32489# does not appear to work on the i937.
7carisfast said:
Thanks for the info. I'll see if it helps. Just as FYI, the code *#32489# does not appear to work on the i937.
Click to expand...
Click to collapse
indeed, so it would seem, many of the diagnostic codes have been disabled which is a pain, even the ones that are left don't always do what you expect them to do
8773 update
dazza9075 said:
firstly DO NOT INSTALL THE SAMSUNG UPDATE!! and if updating the OSan have it unlocked already read This Website and use the relock prevent + edit your hosts file
Absolutely back up your device at every stage using This Guide
So follow these steps
unlock the device Here follow the instructions which includes installing the diagnostic tool and install XAP deployer or XAP handler Here or Here With the XAP file deployer in the WP7 SDK
Then install WP7 Root Tools Here
Then install WP Bazaar market Here
Open Root Tools, and give Bazaar higher level privileges
Find WinTT on the Bazaar market and install it
Open Root Tools, and give WinTT higher level privileges
you may need to restart to get WinTT working
go through WinTT and turn on ICS
Done
Click to expand...
Click to collapse
What if I have already updated to version 7.10.8773.98, is there any other possible way? I don't need any other features. Thanks in advance.
If you have updated the OS and NOT the samsung firmware then reapply the windows break interop unlock, be sure to keep it off the inernet by disabling all coms and then apply the relock prevent xap. if you have applied the Samsung firmware and didn't have it already unlocked or you didn't have a back up, your screwed
Sent from my Samsung Focus S using XDA Windows Phone 7 App
dazza9075 said:
If you have updated the OS and NOT the samsung firmware then reapply the windows break interop unlock, be sure to keep it off the inernet by disabling all coms and then apply the relock prevent xap. if you have applied the Samsung firmware and didn't have it already unlocked or you didn't have a back up, your screwed
Sent from my Samsung Focus S using XDA Windows Phone 7 App
Click to expand...
Click to collapse
First of all I just want to say thanks that you're trying to help me, but I just didn't understand many things u said, I'm not really into technical stuff, but I'll tell you what info I have, in hope of u helping me better.
I don't live in the US and I bought the phone from ebay and it was unlocked and it works perfectly over 2 carriers here in my country, and I have never encountered any problems with it except for the internet sharing feature.
And about 3 months ago the phone notified my to a system upgrade from version 7.10.7740 to version 7.10.8107 then immediatly to version 7.10.8773.98. now I'm guessing these are OS firmwares not samsung software.
but I've noticed something, when I setup my phone for the first time I used a US hotmail account but before I connect to the internet the ICS feature worked, but once I signed in it gave me the dial 611 or go to att.com/mywireless message.
So I am guessing if I restore the device and sign in with a non US hotmail account may result in the feature to be unlocked. The only thing keeping me from trying this because I'll have to redownload all my apps again and reorganize my contacts again. if there's a way to avoid that or someone has tried it please do tell.
Again thanks for your reply.
kholio88 said:
First of all I just want to say thanks that you're trying to help me, but I just didn't understand many things u said, I'm not really into technical stuff, but I'll tell you what info I have, in hope of u helping me better.
I don't live in the US and I bought the phone from ebay and it was unlocked and it works perfectly over 2 carriers here in my country, and I have never encountered any problems with it except for the internet sharing feature.
And about 3 months ago the phone notified my to a system upgrade from version 7.10.7740 to version 7.10.8107 then immediatly to version 7.10.8773.98. now I'm guessing these are OS firmwares not samsung software.
but I've noticed something, when I setup my phone for the first time I used a US hotmail account but before I connect to the internet the ICS feature worked, but once I signed in it gave me the dial 611 or go to att.com/mywireless message.
So I am guessing if I restore the device and sign in with a non US hotmail account may result in the feature to be unlocked. The only thing keeping me from trying this because I'll have to redownload all my apps again and reorganize my contacts again. if there's a way to avoid that or someone has tried it please do tell.
Again thanks for your reply.
Click to expand...
Click to collapse
ok, no problem
can you go to your device settings, in the about section can you tell me your OS version and your firmware version
Samsung Firware Update
dazza9075 said:
ok, no problem
can you go to your device settings, in the about section can you tell me your OS version and your firmware version
Click to expand...
Click to collapse
Dazza,
Kudos for your help as you personally worked with me through this information. Not sure the Samsung update is a concern as I'm running fw2103.11.10.1 and everything works great.
Thanks again.
dazza9075 said:
ok, no problem
can you go to your device settings, in the about section can you tell me your OS version and your firmware version
Click to expand...
Click to collapse
OS version: 7.10.8773.98
Firmware version: 2103.12.05.2
kholio88 said:
OS version: 7.10.8773.98
Firmware version: 2103.12.05.2
Click to expand...
Click to collapse
im afraid to say your firmware is locked,
2103.11.10.1 is unlock-able, im pretty sure anything from xxxx.12.xx.x upwards is locked down solid
I don't suppose you made a backup? if you haven't then there is nothing you can do
the Samsung firmware update was released as a separate update at the same time as the tango 8773 build, it tried to install on mine after the 8773 build
Found a solution =D
dazza9075 said:
im afraid to say your firmware is locked,
2103.11.10.1 is unlock-able, im pretty sure anything from xxxx.12.xx.x upwards is locked down solid
I don't suppose you made a backup? if you haven't then there is nothing you can do
the Samsung firmware update was released as a separate update at the same time as the tango 8773 build, it tried to install on mine after the 8773 build
Click to expand...
Click to collapse
I'm really sorry for the late reply, was busy at work. but during that time I might have found a "Glitch" or a workaround to enable it and I have tested it many times and it works.
Well there are two ways:
1st one which is a sure thing:
1) Turn off the phone, then turn on again.
2) Once the phone is turned on, immediately go to settings>internet sharing and turn it on and BOOM there you go :laugh:
* I have tried this method over a dozen times and it works every single time
** The point here is that you have to enable it immediately after the phone is turned on, I think it happens because the phone doesn't have enough time to send the info. to the servers to know that it's not enabled by default.
2nd one which was succesful over 75% of the time:
1) Go to Settings>cellular>Turn Off, Wait like 5-10 seconds and turn on again.
2) Go to Internet sharing> Turn on, and enjoy :fingers-crossed:
***I don't know why do they work or how, may be it's a Glitch like I said before but the point is they do work
I hope that I've helped someone out there and Thanks to everyone who tried to help me
kholio88 said:
I'm really sorry for the late reply, was busy at work. but during that time I might have found a "Glitch" or a workaround to enable it and I have tested it many times and it works.
Well there are two ways:
1st one which is a sure thing:
1) Turn off the phone, then turn on again.
2) Once the phone is turned on, immediately go to settings>internet sharing and turn it on and BOOM there you go :laugh:
* I have tried this method over a dozen times and it works every single time
** The point here is that you have to enable it immediately after the phone is turned on, I think it happens because the phone doesn't have enough time to send the info. to the servers to know that it's not enabled by default.
2nd one which was succesful over 75% of the time:
1) Go to Settings>cellular>Turn Off, Wait like 5-10 seconds and turn on again.
2) Go to Internet sharing> Turn on, and enjoy :fingers-crossed:
***I don't know why do they work or how, may be it's a Glitch like I said before but the point is they do work
I hope that I've helped someone out there and Thanks to everyone who tried to help me
Click to expand...
Click to collapse
nice find, ICS is disabled locally only, it doesn't have anything to send, the only thing I can think of that makes sense is that the service hasn't been initialised and doesn't call the reg entries that disables ICS, by turning it on manually ASAP it perhaps catches it out. if you enable it, then disable it, can you still enable it again in that session or do you need to restart?
dazza9075 said:
nice find, ICS is disabled locally only, it doesn't have anything to send, the only thing I can think of that makes sense is that the service hasn't been initialised and doesn't call the reg entries that disables ICS, by turning it on manually ASAP it perhaps catches it out. if you enable it, then disable it, can you still enable it again in that session or do you need to restart?
Click to expand...
Click to collapse
Well I tried that, but there is no definite answer to it, sometimes I turn it on and off on and off many times without needing to restart and throughout the whole day, and sometimes it works once and doesn't at the second try. So it all comes down to luck, but still better than nothing
Now the thing is I'm afraid that when the 7.8 update comes, they would fix this glitch =D Haha.

Categories

Resources