Related
Hey guys.
ive made a simple patch for the blue angel running windows mobile 5 where we got the error connection loss after loading any more than 200kb.
The patch I have made sorts this problem and one page for example that I now know that loads and didnt used to is Ebay, and buzzdev.
Simply insert this into the registry of the blueangel,, only for Windows Mobile 5.0.
U MUST let the registry flush before reseting the device. To do this press the power button to turn device off, wait 15 secs, turn back on and then soft reset.
Cheers.
s1nn0n
I have updated this, still seemed to throw up the error with v1.0, v1.1 seems fine 100% of the time.
OK, I feel like a bloody moron and a total newbie here! I have tried importing the regfile with PHM Registry Editor, but I can't seem to do it. Could you please tell me what you use?
1.1b is now up.
cache has been increased.
ill make a cab later to make it easier. this works fine for me now even over some pages tht still didnt quite seem to load fully in 1.1
Great, thanks! Maybe I can install it as well then... I was actually wondering why eBay wouldn't load while I was looking for some stuff in bed last night, but this explains it. Does this help on the pitiful speed of loading the pages as well? I don't think eBay and IMDB were that slow to load on the WM2003SE I used before. Or were they?
speed doesnt seem to bad to be honest. id say its equally comparable to 2003se.
ill get tht cab made up now.
ok here it is,
the cab as promised.
Thanks! But I don't know if I have done anything wrong. I try eBay's front page, and after a while I see "The page cannot be displayed og downloaded because the connection was lost. Check the connection and try again later." This is with WiFi. I installed the cab, turned the unit off for around 30 seconds and then soft reset it. Isn't that the way to do it with this WM5 ROM?
Edit: Sorry, I didn't get the part about turning the unit on again before the soft reset. Trying it now. (This ain't my day!)
Edit 2: Nope. Didn't work that way either. :?
Hmm... weird... first time I installed WM5: I had nooooooooo problmes using PIE with WiFi and "big" sites. Now, on my 2nd try with WM5 I have those problems.
I'll try the patch later and write down what's going on.
Heres another patch which is slightly updated, v1.2. It has the following changes:
1. Makes pages load faster having more connections per server.
2. The timeout time has been increased so that the page will load for longer and wait for the page to fully load before displaying the connection lost error.
3. Cache of ssl pages has been disabled.
Mastiff said:
Thanks! But I don't know if I have done anything wrong. I try eBay's front page, and after a while I see "The page cannot be displayed og downloaded because the connection was lost. Check the connection and try again later." This is with WiFi. I installed the cab, turned the unit off for around 30 seconds and then soft reset it. Isn't that the way to do it with this WM5 ROM?
Edit: Sorry, I didn't get the part about turning the unit on again before the soft reset. Trying it now. (This ain't my day!)
Edit 2: Nope. Didn't work that way either. :?
Click to expand...
Click to collapse
Mastiff: Please use the latest version and tell me how u get on...
I don't have that problem
I use the first patched version how about you?
Ye im using the first patched version...
Its weird why some users are having the problem and others are not...
Can u load ebay ok without applying my patch?
No. Sorry. I still get the message. Also I don't feel that this version is faster than the previuos. Weird! Do you use it on GPRS or on WiFi? I never surf on anything else than WiFi, maybe that's the thing?
s1nn0n said:
Ye im using the first patched version...
Its weird why some users are having the problem and others are not...
Can u load ebay ok without applying my patch?
Click to expand...
Click to collapse
That's the crazy thing: first time I installed WM5 on my PH20B1 BA, I had no problems with eBay and other much bigger sites... then I went back because of the performance to WM2003SE, had there the phone problem and several others, so I switched again to WM5 and NOW I have those problems with the PIE... First time I had the v1 WM5 and now the "v3" - that's the only difference. However, I'll try out that patch.
Mastiff said:
No. Sorry. I still get the message. Also I don't feel that this version is faster than the previuos. Weird! Do you use it on GPRS or on WiFi? I never surf on anything else than WiFi, maybe that's the thing?
Click to expand...
Click to collapse
Just loaded ebay.com with the craddle connection and didn't have any problem.. I used WiFi with other sites and never saw that problem... Tomorrow i can try loading it at a wifi connection
OK, I just tested. eBay works with the cradle, but not with WiFi.
I tested it over wifi and works fine.
No patch applied (only the 1st patched rom version)
I still can't see the buttons.. I guess we need the Hima's IE Registry
I have those problems w/ PIE since i have the patch 3 version from WM5, with the very first version i had no problems concering PIE and Wifi...
I'm starting to think that the problem is WiFi itself, not just surfing via WiFi: http://forum.xda-developers.com/viewtopic.php?t=29904
I'm getting to the connection page but then it goes back to the sign in.
Working great on my phone.
can you attach the ractrl.cab you used?
Never used one, basicaly i went to the website on my phone and logged on and it asked me to register my phone. ( am an existing user btw on Imate K-jam). Software downloaded automaticaly if I remember rightly.
trjons said:
I'm getting to the connection page but then it goes back to the sign in.
Click to expand...
Click to collapse
Just tested it and works nice.
Downloaded the RACtrlCE.cab more or less automatically. And then continue...
The only thing that makes me doubting is, that I remember I tested it before on this device. I threw away the RACtrlCE.cab from my documents folder.
Maybe not allowed to throw it away? I will test in the future.
But: Works perfect and the scrolling, by pointing in the corners, goes faster than on my Qtek 9100.
I miss the larger real estate of course.
Huib
I must have used the old RACtrlCE.cab because when I uninstalled it and tried again it worked.
Your in luck mate, I found the file. But I cant find away to upload it here.
yeah, connecting to logmein and installing the cab directly from website works great!
Sorry to revive this old thread but I found it to be inconclusive.
I have the same problem as the OP: I login to their website and see my list of computers...from that point on anything I click, be it a computer or the "my accounts" section, it brings me back to the login screen. It's a complete loop.
I've been using logmein a long time and I know that the .cab file is downloaded right after you choose which computer to connect to...but I can't make it that far on my AT&T Tilt. It's just a loop.
I went back to my PPC-6700 (HTC Apache) and used my WiFi to connect to logmein and had no problems whatsoever.
Any suggestions? Should I find the .cab on my 6700 and send it to my Tilt?
Thanks in advance.
I'm impatient so I went ahead and copied the .cab file from my 6700 to my Tilt...the result is the same.
It installed fine: no errors, no message that it was made for a previous version of windows etc.
However when I go to logmein.com and try to login, I am confronted with the same loop as described above.
When you log into LOGEMEIN it will prompt you to d/l the .cab file if you dont have it installed. I had no problems in logging in from my 8525 or TILT.
avega1027 said:
When you log into LOGEMEIN it will prompt you to d/l the .cab file if you dont have it installed. I had no problems in logging in from my 8525 or TILT.
Click to expand...
Click to collapse
Like I said, I can log in fine. Upon choosing which computer to connect to, it brings me back to the login screen. Typically, you would choose the computer you want to connect to and then it would realize you don't have the program installed and prompt you to do so. However, whether I have installed the .cab manually or before doing so, I cannot get this far.
I got my Tilt yesterday and the only tweaking I've done is with the KaiserTweak program from these forums. If anyone can point to a specific tweak that might effect this, I'll revert it...
After more testing I found a way to get access to my computer. Instead of clicking on the computer name, click on Edit. Then scroll down to where it says "Status: Online, Connect to this computer" - You can click on "Connect to this computer" and it will work.
After making it work I went back to my computer listing screen and tried to click on the name, as usual, and it went right back to the login screen. At least this workaround seems to work fine. I'll try uninstalling the software now and letting it install on its own and see how it works from there...
After uninstalling, rebooting, testing, reinstalling, rebooting and testing some more...I have been unable to replicate my "workaround" from above. I'm left clueless as to what the problem is here and whether this is just some dumb server problem on logmein's side. If anyone can help please chime in. tyvm
On a Tilt try
Start>Programs>Tools>Proxy manager>disable proxy
Worked like a champ for me
Those having problems; are you trying to access logmein using the full web site - https://www.logmein.com or logmein for PDA's https://secure.logmein.com/pda/ ? The full web site gets me in a loop, but using the site for PDA's works perfectly.
FrankyG
TomErickson said:
On a Tilt try
Start>Programs>Tools>Proxy manager>disable proxy
Worked like a champ for me
Click to expand...
Click to collapse
Yeup forgot to mention that. When I log in I disable the proxy.
If i remember correcly, i had this loop problem when using opera on the kaiser to surf on logmein.com .
Used PIE instead and no more loop problem.
Thank you for the proxy fix - it worked for me.
Can someone tell me what the proxy is for and if there is any reason I would need to enable it again? I'd like to know if I should bring this to logmein support or not. Thanks.
jeffreii said:
Thank you for the proxy fix - it worked for me.
Can someone tell me what the proxy is for and if there is any reason I would need to enable it again? I'd like to know if I should bring this to logmein support or not. Thanks.
Click to expand...
Click to collapse
i think its for cingular's internal sites...like ringtones and that kind of madness. i doubt you'll ever need it.
I was using the demo which seems to work ok. So I bought it. Now I have an issue where once I close the IM program (but running in background), if I open the IM or try to read an incoming message, I don't get the IM+ window. I do get the bottom bar with all the menus that work, but I can't see my IM or the contact list.
I don't know what is causing this. I tested this program pretty much all the way through all my loading of my software. It was working. Then all of sudden it quit working, I tried to uninstall everything but that didnt fix it. I tried reinstalling the program but that too failed to help.
*bump**bump*
*bump*
*bump*
Hmmm, I bought one also but have not got that kind of issue.
So far so good.
I think you need to contact their support.
i have no problems with im+ either
no problems here
I contacted them 11/13 but still no answer. And just now I just tried to remove it and.. if I turn off "ALways run in background" it fixed it. BUT of course it shuts down the program the minute I close it. I moved the program over to the exceptions list for my tast manager. Now it sorta works. Thank GOD. I thought I waisted $40 on this program.
Not sure what this does:
"Prevent automatic power down"
If this option is marked with flag, your Pocket PC will be prevented from going to standby mode.
I think my Tilt still goes to sleep, like as if I pressed the power button after a few minutes, with or without the check on that box so I'm not sure what it does.
starstreak said:
Not sure what this does:
"Prevent automatic power down"
If this option is marked with flag, your Pocket PC will be prevented from going to standby mode.
I think my Tilt still goes to sleep, like as if I pressed the power button after a few minutes, with or without the check on that box so I'm not sure what it does.
Click to expand...
Click to collapse
It's only meant for Pocket PC's, not PPC PE's. This is why there's no difference on a PPC phone.
Try 2 open the Today Screen with the Start Button.. or try to check if X BUtton is used just minimize and close on longer push.
both are options which should work.. had the same problem. you'd better bought agile messenger:O
-adrian- said:
Try 2 open the Today Screen with the Start Button.. or try to check if X BUtton is used just minimize and close on longer push.
both are options which should work.. had the same problem. you'd better bought agile messenger:O
Click to expand...
Click to collapse
Note that many people are complaining about Aglie's sending passwords in cleartext
Menneisyys said:
Note that many people are complaining about Aglie's sending passwords in cleartext
Click to expand...
Click to collapse
Not to mention the whole pricing scheme they came up with, IM+ is a one time fee. Also, I've noticed more compatibility with Services from IM+ over Agile. Agile doesn't always recognize Aliases set by Messaging services, and I found it to be more bulky and bloated, but thats just my opinion. I wrote an email (using the form on the site) to ShapeServices support and got a response in 2 days... Not the most outstanding response time, but I guess better late then never.
Thanks for the replies. I found agile a day AFTER I bought IM+. It looks good, but didn't seem to be as polished as IM+, although IM+ isn't working all that great for me at the moment, but it is running now). Agile has something about paying $40+ for a lifetime subscription. Or was that for a years worth... I did like how you could send voice messages and pictures really easy in agile.
One thing that bothered me was, do these programs do a "forwarding" to keep track of what you send on their servers? I think Agile does. But I think IM+ uses AIMs server, but I could be wrong.
starstreak said:
One thing that bothered me was, do these programs do a "forwarding" to keep track of what you send on their servers? I think Agile does. But I think IM+ uses AIMs server, but I could be wrong.
Click to expand...
Click to collapse
You mean are they all central server-based solutions? To my knowledge, yes - everything you say goes through their servers.
starstreak said:
I did like how you could send voice messages and pictures really easy in agile.
Click to expand...
Click to collapse
With the free Fring, you can even chat in voice (not just send voice clips) - it supports VoIP and is great. A Kaiser-compatible version has been released recently; I've published a news item on it today.
I'm using Palringo at the moment, with pidgin on my desktop to manage my list from until the next version comes out that has the brunt of the missing features. For my vote, it's the snappiest UI I've seen so far, a Today plugin is in the works (for now it's a tray icon for notification), has GREAT camera support like Agile, fun PTT radio like audio. Audio and Pictures work will non Palringo clients as well, they just recieve a link that lets them play / view through a web browser.
Their support is also friendly and fairly active on the forum. This IM client also has "groups" which are sort of like chat rooms that you can subscribe to. These have proven fun and useful as well in my experience.
I had agile, but it was to slow, I've had IM+ but was mislead by a phone rep that my phones version supported file transfers (what I liked), so they gave me a refund. I've also had Fring, but it doesn't support Yahoo or AIM, which I use about as much as any other. Once fring gets those I'll be tempted to go back to it though, excellent peice of code.
I have I'M+ on my XV-6700 installed on to the storage card, and as long as I don't suspend power everything works fine. If I do suspend power then when I turn the device back on it can't find the storage card, have to do a soft reset to be able to see the card again!
debating if its worth it, what other software would you recommend?
I need AIM and Google Talk
I found something bad. I guess I was wrong, If I turn this on, my tilt doesnt go insto standy. You tend not to notice this because most people hit the off button on the side of the unit. But I noticed it never shut down when I doing nothing (I have it to turn off after 2mins). But if I turned this off, then it would shut down. But I noticed with the Tilt off, IM+ would disconnect but not show that it was disconnected when you turn it back on.
"
Originally Posted by starstreak
Not sure what this does:
"Prevent automatic power down"
If this option is marked with flag, your Pocket PC will be prevented from going to standby mode.
I think my Tilt still goes to sleep, like as if I pressed the power button after a few minutes, with or without the check on that box so I'm not sure what it does.
It's only meant for Pocket PC's, not PPC PE's. This is why there's no difference on a PPC phone."
Click to expand...
Click to collapse
__________________
Anyone using IM+ with Dutty's Kaiser DualTouch v1.1 ROM?
I am having problems with IM+ on Dutty's DualTouch v1.1 ROM and was wondering if anyone else has run into similar problems. I posted a description of the problem in Dutty's DualTouch v1.1 ROM Thread, but it doesn't seem like anyone there uses IM+. Any help would be greatly appreciated. Thanks!
I can not get AIM+ to work with Dutty's DualTouch v1.1 rom. When ever I open up a buddy, it does not give me the textbox below to enter a message. Anyone else with this issue? Agile does not work with my dataplan but works through the USB connection.
- Alex
cctang said:
I am having problems with IM+ on Dutty's DualTouch v1.1 ROM and was wondering if anyone else has run into similar problems. I posted a description of the problem in Dutty's DualTouch v1.1 ROM Thread, but it doesn't seem like anyone there uses IM+. Any help would be greatly appreciated. Thanks!
Click to expand...
Click to collapse
Works now with Dutty's last rom! but only problem is the vibrate feature. i can't get it to work even though its checked. any ideas?
ok so Ive had my awesome tilt for a few days now and ever since i got it out of the box i dreamed of watching you tube videos and using GPS, gps is fine but when ever i go to m.youtube.com and start playing a video real player tries to play it and then i get error file not supported by real player! i have tried to look to see how to uninstall real plaer but i can find it anywhere. i downloaded flash video bundle and TCMP set it for default player for all but pictures still nothing..... i even have tried regular youtube and when click a video it says video not found possibly been removed.
Ive been looking around since i got hte thing to find a fix. i though FLV and TCPMP would do it but no luck.
any help would be greatly appreciated thanks in advance.
use htc streaming media for the youtube mobile site. for regular youtube use fvb and tcpmp. if you're having trouble, try using opening the "video sites" link in your start menu and go to the skweezer or mobileleap link
The tilt doesn't have htc streaming media installed, you'll have to score the cab to get that. Otherwise, don't go to m.youtube.com, go to
www.youtube.com/?nomobile=1
You'll get the desktop version (essentially) of youtube, and then you'll be able to watch the vids in TCPMP.
what i dont like is how lots of videos fail to play and say they're invalid.some work and some dont
Try this...
It has its own FLV player.
I've been using the TCMP/Flashvideobundle solution and that works well for Youtube and the other sites it's designed for, but is there anything out there which will just work with any site using flash video? Does the above CAB achieve that?
Boinng said:
I've been using the TCMP/Flashvideobundle solution and that works well for Youtube and the other sites it's designed for, but is there anything out there which will just work with any site using flash video? Does the above CAB achieve that?
Click to expand...
Click to collapse
Yes. YouTubePlay is a standalone application with its own FLV player. Once installed, you will see the icon under Programs.
Excellent, thanks, I'll give it a go. Presumably I need to uninstall all or part of TCMP/Flashvideobundle to stop things getting confused?
snooginsguy said:
The tilt doesn't have htc streaming media installed, you'll have to score the cab to get that. Otherwise, don't go to m.youtube.com, go to
www.youtube.com/?nomobile=1
You'll get the desktop version (essentially) of youtube, and then you'll be able to watch the vids in TCPMP.
Click to expand...
Click to collapse
LOL, you do realize that StreamingMedia Player is just a version of RealPlayer licensed by HTC, right?
works like a champ
MACkjam said:
It has its own FLV player.
Click to expand...
Click to collapse
ok wow that works like a dream! is that the offical one from you tube?
I know youtube realsed one but the tilt is not compatable the link is something like m.youtube.com/app
regardless that cab is a champ just make sure to reset the device
MACkjam said:
It has its own FLV player.
Click to expand...
Click to collapse
Hmm, okay well this really didn't work out so well for me. I installed it, tried a couple of flash video sites in PIE with no joy and then decided a reset must be in order, but after the (soft) reset my kaiser failed to boot It was just sat on "Smart Mobility" for about ten minutes before I got a message asking me to press send for a hard reset, because I'd either "incorrectly" turned the device of or installed software from an untrusted source. I tried a couple more soft resets, still no deal, so I've had to hard reset and am now restoring from a (week old) backup.
I'd reset a couple of times for other reasons yesterday before installing this cab, with no problems.
I guess this must be working for some looking at the posts above, but it really seems to have disagreed with my phone for some reason. I'm using the stock HTC Rom (wm6.0) if that means anything.
Boinng said:
Hmm, okay well this really didn't work out so well for me. I installed it, tried a couple of flash video sites in PIE with no joy and then decided a reset must be in order, but after the (soft) reset my kaiser failed to boot It was just sat on "Smart Mobility" for about ten minutes before I got a message asking me to press send for a hard reset, because I'd either "incorrectly" turned the device of or installed software from an untrusted source. I tried a couple more soft resets, still no deal, so I've had to hard reset and am now restoring from a (week old) backup.
I'd reset a couple of times for other reasons yesterday before installing this cab, with no problems.
I guess this must be working for some looking at the posts above, but it really seems to have disagreed with my phone for some reason. I'm using the stock HTC Rom (wm6.0) if that means anything.
Click to expand...
Click to collapse
So, just wondering, is this just me? I guess it's unlikely that everyone will be rushing to find out, but still - is this cab working for everyone else? No problems after resetting?
My phone's all back up to speed and working fine, but I'm loathe to try this cab again obviously. I'm curious whether I'm right to blame it, or if there's something else I should be worrying about - is my phone just going to choke again a few more resets down the line? Any help appreciated.
PS - the only other unusual event with my phone recently was a brief dalliance with one of Dutty's roms last week (hence the backup). I didn't get on with it, so went back to the original HTC Rom on the same day (Thursday), restored from my Sprite backup, and everything was fine from then till yesterday evening, resets and all.
works fine but room for improvement
im not sure why that happened im using stock at&t rom also. you are going strart) programs ) youtube player right ? cuz its its own player
ill admit its not the best. after a minute or so the audio stops and secounds later the screen shuts off
and the scroll menus are a bit awkawerd
but then again before this cab I couldn't watch youtube so im happy with it.. and I belie this is the offical one from youtube so im sure its just going to get better & better
Boinng said:
Hmm, okay well this really didn't work out so well for me. I installed it, tried a couple of flash video sites in PIE with no joy and then decided a reset must be in order, but after the (soft) reset my kaiser failed to boot It was just sat on "Smart Mobility" for about ten minutes before I got a message asking me to press send for a hard reset, because I'd either "incorrectly" turned the device of or installed software from an untrusted source. I tried a couple more soft resets, still no deal, so I've had to hard reset and am now restoring from a (week old) backup.
I'd reset a couple of times for other reasons yesterday before installing this cab, with no problems.
I guess this must be working for some looking at the posts above, but it really seems to have disagreed with my phone for some reason. I'm using the stock HTC Rom (wm6.0) if that means anything.
Click to expand...
Click to collapse
Guys...
This is a STANDALONE programme. In other words, you start the app, you search for a video, eg, sugar sugar or thunderstruck or whatever you want, it takes a few seconds (or minutes depending on search string used) to find videos, then it displays thumbnails. You select the thumbnail you want and it plays flawlessly. This has nothing to do with PIE. If you want to play flash video with PIE, then you MUST use TCPMP with the flash video bundle.
I trust that this clarifies things.
BTW I have a TyTN II with stock standard ROM.
why dont you guys just point him to the link?
this will tell you everything about youtubeplay.
http://forum.xda-developers.com/newreply.php?do=newreply&noquote=1&p=2174477
thakidc said:
why dont you guys just point him to the link?
this will tell you everything about youtubeplay.
http://forum.xda-developers.com/newreply.php?do=newreply&noquote=1&p=2174477
Click to expand...
Click to collapse
Are you aware that this link is simply directing back to this thread and is simply opening up a 'reply to' page?
Please answer his post.. it says realplayer takes over.. how can I stop realplayer from taking over. better yet. how can I remove realplayer.. There is no UnInstaller.. and I tried removing through registry but couldnt. Its hidden inside the windows folder but its protected.
Can anyone please tell me how to Remove realplayer??
much appreciated.
thank you
Hi,
A few days ago the youtube application stopped working. It does't load the the first page anymore and I can't search anymore. It just says there are no video's. I still can see the video's I put in my bookmarks and video's that are in history though. Anyone knows what to do to solve this?
Thanks.
you're not alone in this...
Xevor said:
Hi,
A few days ago the youtube application stopped working. It does't load the the first page anymore and I can't search anymore. It just says there are no video's. I still can see the video's I put in my bookmarks and video's that are in history though. Anyone knows what to do to solve this?
Thanks.
Click to expand...
Click to collapse
Hi,
We are discussing this problem in the Raphael forum.
http://forum.xda-developers.com/showthread.php?t=432554
Maybe the solutions posted there work for you.
Scott
Rahza said:
Hi,
We are discussing this problem in the Raphael forum.
http://forum.xda-developers.com/showthread.php?t=432554
Maybe the solutions posted there work for you.
Scott
Click to expand...
Click to collapse
Thanks for the link, I'll keep an eye on that topic. I tried all the solutions in that topic but none of them worked. But I saw that most of the people with the same problem are Dutch too just like me and I also use KPN like me..
this is becoming very popular....
i have a week searching for any solution but till now nothing...
i have the problem me too.Maybe I will try to solve it with storage clear.
*** Not works!!!
Damn that's so nasty!What a f**k is going on with HTC ??!!?!
Hi,
i have the problem too, since yesterday.
I am german (vodaphone). I can still watch the vids bookmarked and in History. The first page doesn't load anymore and i can not search anymore...
I use the htc 1.93 GER Rom and Radio .08.
I also use SPB Mobile Shell and SPB Phone Suite. These are the programs i installed a few days ago...
Any Idea?
thx
Neutrum.
i had this problem after deleting the "Youtube" folder in Internal Storage.
Worked again after flashing a new ROM.
All,
I have had this problem too, I do not know if you have encountered the same issue with GPS Fix at the same time (whereby it does not update, no matter which connection type you try). If this happens then you will need to hard reset the device, sorry but this is the only way that actually works!
which are the bottons for hard reset on HTC DIamond?
rocky50 said:
which are the bottons for hard reset on HTC DIamond?
Click to expand...
Click to collapse
http://www.hardreset.eu/htc_touch_diamond_hard_reset_soft_reset_en.html
a hard reset doesn't always work, atleast it didn't work for me.. I tried it twice without result
let's write emails to HTC ....
It just started working again.. After my sister touched the phone
I've written an email to HTC.They answered me that 'Google' have updated their YouTube server and this is having an impact with the You Tube application on our handsets.This is something that can only be resolved by Google but HTC are working on finding another technical solution for HTC devices.
i had same prob, but kinda solved it.
load up youtube app, and when the sign pops up saying no vids found, leave the app running in background and return to ur home screen. leave the app running for a little while and it should load up videos like normal, just exit the app and open again, it shouuld start working fine.
Thank you woburnshah but right now,it works excellent!Without any problems.Maybe the problem has been solved!
I had same problem. "No Video" ,
as I saw in the link to Raphael ,
I closed YouTube application , open IE (you can find it under Windows) and then open Youtube again(while IE stay in background) , now it's working...no needs to open IE again after first time..
Mine had begun working normally again and I did nothing so they must have found a fix on the other end?
krabman said:
Mine had begun working normally again and I did nothing so they must have found a fix on the other end?
Click to expand...
Click to collapse
just checked and now mine is good too. funny how it only affected some people huh?