Sudden device blocking with no apparent reason - Tilt, TyTN II, MDA Vario III General

Hi,
Since this week, my Kaiser is almost systematically getting stuck few minutes after soft resest.
Sequence is :
1. Soft reset
2. Enter password & start phone
3. Do nothing - screen turns off as expected
4. From then on, press on power button on the right hand side of the device does not wake it up - only way out seems to be soft reset and back to point 1...
When it is stuck the green and blue lights are blincking as if it was still active.
In a couple of occasions, an incoming phone call did wake it up and then fine untill it went to standbye...
In a couple of other occasions, an incoming call would trigger a continuous ring and no way to stop it except soft reset.
What is strange is that my device is working (relatively) fine - soft reset every now then, as I'm afraid everyone - for already 5 months... I have not changed anything on its configuration for weeks!!!
Any one would have a possible explanation and fix?
Thanks,
ROM version is : 1.56.406.5
Radio : 1.27.12.17

Related

Phone freeze after a call

Hi,
I wonder if I'm the only one having this issue...
sometimes, after a call, the phone freezes and I have to press the Home key to get the TF3D screen back.
But after that, I can't make a new call... nothing happens when I press the "Call" button or when I try to launch the dialer by pressing on the "Phone" soft button.
I try to launch the FdcSoft TaskMgr (wm2005_3.1) in order to see if a process was stuck, it usually loads fast but in this case, it stops loading and nothing was displayed... (I'm still able to see the TF3D background instead of TaskMgr).
Only way to recover from it, is to SR the device...
I switch off the device each nights, I would expect more stability, it's not like I'm running it for more than 2 weeks...
This issue always occurs (when it does) after a call or when I press the hard key "End call".
Oh, funny thing... By 3 times, I was also unable to end a call, the call was still running and I had to SR the device to end the call... very nice !
Anyone with this issue or with an idea ?
It's the only thing that drives me crazy with this phone :|
Rom : 1.93
radio : BS14 currently, but it was the same with previous radios.
is there anybody with a little clue for me ?
Please
Me too.
Panosha: 1.93.405.1 WWE Shine On 2.4 Full
Radio: 1.03.25.18
After calls... Freezes 80% or more. I don't know if maybe it is 100% of the time when the other end hangs up first. (I don't get it with Voicemail!)
I also get freezes some other times. I don't think it is memory related, (before someone suggests it.) Also Please don't tell me to Hard Reset. I have Hard resetted to my heart's content, also directly after every Rom Update (to get GPS working)
try soft reset......i also got that problem....i do a soft reset,works fine...
cheers!?!!!

Upon soft reset phone does not boot

I tried to make a call a few minutes ago and I couldn't hear any sound but screen said call was connected. I did a soft reset and now I'm getting this message "KAIS1*0 mfg. SPL-1.0.01pof CPLD-8" on the tri colored screen. I've been using my installed rom for over a year and a half now.
I'm in a situation now where I don't have time to research this issue so I'm sorry if this situation has been posted in the past. I apologize... Just wondering off hand if this or a similar issue has happened to anyone else in the past. If I have any options besides reflash. I'm on call for work and I'm going to have to pick up a new phone until I can do some research.
Many Thanks!
UPDATE: My phone will boot when plugged into the charger, if I unplug the phone and try to boot it will not. One other thing I noticed is that my speaker doesn't work now when unplugged, but does when I'm plugged in. Not sure where to go from here could it be my mini usb connector on the phone that's causing this?
dewicide said:
I tried to make a call a few minutes ago and I couldn't hear any sound but screen said call was connected. I did a soft reset and now I'm getting this message "KAIS1*0 mfg. SPL-1.0.01pof CPLD-8" on the tri colored screen. I've been using my installed rom for over a year and a half now.
I'm in a situation now where I don't have time to research this issue so I'm sorry if this situation has been posted in the past. I apologize... Just wondering off hand if this or a similar issue has happened to anyone else in the past. If I have any options besides reflash. I'm on call for work and I'm going to have to pick up a new phone until I can do some research.
Many Thanks!
Click to expand...
Click to collapse
Try a hard reset.
Hard Reset
- Press and hold both soft keys (The two inside the green and red phone ones)
- While holding softkeys, using a stylus, press and HOLD the soft reset button at the bottom of the phone
- Keep all three pressed until the keypad lights turn off and then flash
- Release the soft reset button while still pressing the soft keys
- Let go of the two soft keys once the message "This operation will delete all your personal data, to manufacturer default" appears on screen
- Finally, press the green call button to perform the hard reset, or press other key to cancel
this could be a battery issue and if it is you need to clean the contacts or get a new battery
I thought the same thing so I swapped batteries with my girlfriend who also has the same phone. My battery works in her phone and with hers in mine I still have the same issue. My battery compartment was very clean. I pried up my contacts a bit though. After opening my girlfriends phone up, hers is a different story. I stumbled upon this thread about stuck spl staying in bootloader mode. I wonder if this could be my issue? http://forum.xda-developers.com/showthread.php?t=420683
Everything seems to match up with the issues I'm having...

Diamond does not Power On

Hi i have a few issues on my diamond. I hope you guys could help..
1st issue: lately my diamond keeps on resetting by itself.
2nd issue: later I've learned that when I record my voice using the software within the ROM, I don't hear anything but when I record my voice using my htc headset/earphones there is a sound.
What I did was:
This day I've flashed a new rom (Energy Rom) into my Diamond. It works ok then I flashed the Radio (Radio_1.13.25.24). I was able to use my diamond for a few hours.
Now..
3rd issue: My diamond is not powering on..
What i did before this happened was...
I pressed and hold the power button for about a few seconds so the ShutXP would pop up and I could soft reset my diamond.Before I clicked the soft reset button, I was checking out all the functions of it. then i clicked, a little icon,which is the Setup Timer Action. Here's the setup:
Action: Turn Off Pocket PC
In: (i don't exactly have seen the time indicated)
As curious as i am, I Clicked the Set Action button. It did shut my diamond off. Then I tried turning it on, but all it was doing was vibrate and the screen was black. At first I was hearing the start up sound a few times but later it didn't hear it anymore. I plugged in the charger but there's no white light on the circle button which used to have a light on the borders of the circle button when plugged in the usb cable. I tried pressing the power button plus the Volume down so the bootloader would appear but it did not. What shall I do?
Are you sure that the screen working because the phone vibrate and play the startup sound so if think its the screen that have som serious problem !!
HELP
I also flashed a new rom (Energy Rom) into my Diamond before.
It cannot run window mobile6.5.........how can I do???
I cannot connect to PC .......
I recently also had a similiar problem, after attempting a flash of the Rom, the ROM update stopped halfway through and reported that it had lost connection to the device....
The whole phone would not vibrate/power on, nothing - no glowing ring around the middle button to indicate it charging at all.
I had to return to the repair centre and somehow they didn't notice that I had modified the firmware and replaced the whole phone for free citing a hardware issue ...
Doesnt sound good if you cannot hard reset the device

Diamond reboot loop w. original ROM

hi there,
this morning, without any interactiom, i heard the vibration of my touch diamond restarting.(with original newest ROM from htc website that ran without any problem for several months). battery was about 80% yesterday evening.
but it wasn´t starting at all. after the HTC animation and the green windows mobile screen, it started again. after restarting for 20 minutes i took out the battery, put it in again and performed a hard reset as stated in the manual.
now, on the "rainbow" screen i get a message like
psoc diam stage_pvt 0x32
then i did the Volume-Up reset, and now i don´t even get the red version information in the lower right screen. as it doesn´t even start i cannot get an active sync connection.
any ideas? is my phone broken? i didn´t do anything special, and i wonder why it rebooted without interaction this morning.
any ideas what i can do?
thanks in advance,
jkersch
Mine started doing this about 2 weeks ago it woke me up in the middle of night while sleeping with its vibrator and start sound.
The only thing I have found is that my little reset button at the pen holder dosent work anymore. To do a hard reset i have to takeout the battery and then put it in, hold the volume key and enter key then power it to get it. Flashed by holding volume down and the power on, it hold for about 10min just enough to get the flash.
I managed to flash it once but it dosent help, it constantly reset at the thouch diamond screen. Some times i get to the green windows mobile screen.
As warrenty is out on my phone and ive given up and using another phone.
Same problem in a different thread
Have a look at http://forum.xda-developers.com/showthread.php?p=5279740.
install a new radio worked for me

[Q] Four buttons stopped working: Call/End call/Start/OK. What's the cause / how fix?

Hi, the 4 buttons - Call, End call, Start, and OK - have stopped working on my win mo device (kaiser aka tytn2, wm6.1). Keyboard backlight doesn't turn on when I press them. All other keys (including IE, messaging, both soft keys, and all the other keys on the device) are working though, and backlight is turning on with them. Maybe it's related to the fact that a few days ago after disconnecting this device from charging over usb it almost stopped responding so I had to reboot it (device was probably low on memory too just before reboting because of many programs running). Some time after rebooting I noticed exactly these 4 keys not working. Powering it off and on doesn't solve it, I have tried it several times. Trying to assign another action to OK or Start button didn't help too. Looks to me like soft problem still..
How can I find the cause of the problem and fix it thru some setts, user config, user cfg files, registry, etc?
Please help!
Edit: Also, is there a way I could test if Call, End call, Start or OK button is working at the lowest software levels that are possible (like in bootloader screen, etc.)?
OK

Categories

Resources