Kaiser places calls when in locked mode - Tilt, TyTN II, MDA Vario III General

My kaiser sometimes places calls when my device is off and put into my pocket, even when i manually locked it. The device always calls the last people i called, I discovered. It occurs when i listen to songs with Coreplayer. I sometimes hear other sounds like, the bleep when recording a message in the voice recorder.
So most likely some button combination sets off the device and let it place a call or somethings else.
As said my device is a kaiser with custom firmware (NoThrills dutch firmware WM 6.1). I also had this problem with Q-mobile 1.2 wich is WM 6.0, so it most likely ain't a firmware problem.
Anyone discovered this bug(?) or do you have any tips to get rid of it, it obviously is very annoying? Thanks in advance.

I had the same issue and the only solution that I found was to not only lock the screen but also to have a pass code so when the screen turned back on, I had to enter that. It avoided my phone from calling the 911 dispatch cetner again.

Hmm, it's not the best solution, but i'll try it, i'll report back when it solves the problem.
Anyone got more tips?

I have the same problem with my T-Mobile Wing. Irritating as hell. I can't figure out why it happens. It doesn't happen all the time.
I listen to streaming internet radio at work. It will dial the last number I called. When it does it, it does it over and over. It does it with Core Player, WMP, and TCPMP player. Even does it with Resco Radio.
I suspect the dialer or the skin but really have no clue. I wish someone knew what causes this.

Related

Silent for about 20 second on phone calls

After using the Tilt for a week, I experienced this problem couple times and I wonder if others are having the same problem. This typically happen after I used my phone for a while. I would make a phone call or receive a call, the call would be silent or both ends (caller and callee) for about 20 seconds and then we could hear each other. Once the phone had this problem, every subsequence calls will have the same problem until I soft-reset the phone. I wonder if it is a hardware problem and if I should get an exchange before the 30 days is up.
never had this problem in any of my windows phones... any 3rd party applications installed?
what operating system is it running? (AT&T? t-mobile? Orange? etc)
verify that you don't have any recording software, like resco audio recorder
Hard reset the phone. Worked for me.
I also had the exact same problem with my Tilt flashed to HTC stock Rom. It only happened once before I flashed to austinsync's BigStorage Rom and has not happened since. But I am starting to get a little nervous about all of these "little issues" that people are having with this phone.
You know.... like the phone not working!! Or... emails not coming through after the phone goes to sleep!!
I am really hoping we see a new Rom show up on these boards like... by the weekend.
I am using the original AT&T rom and do not have any 3rd party recording software. I do have MS Voice Command 1.6 but I don't think that's the problem.
No voice command, standard t-mobile Vario III.
I'm also noticing a distinct lag between the call being picked up and the time the caller and I can hear each other.
Often the call is connected to a volley of hello ? 's
The delay is much worse if I'm using a BT ear/head set. And the ear piece volume is atrociously quiet.
Not nearly as good as the Vario II
I am having the kaiser for three weeks now and I also had this problem until I did a hard reset today (soft reset did not solve the problem). I also had resco audi recorder running with storing the files on the sd card. As I also red that others have a problem with the delay ring when recieving a phone call when the ring tone is stored on the sd card, this might also have the problem (I only realized it after the hard reset when I was wondering what all those recordings meant to be).
Markus
It appears my problem has something to do with using Voice Command over BT. The problem went away after I stopped doing that.
markustr said:
I am having the kaiser for three weeks now and I also had this problem until I did a hard reset today (soft reset did not solve the problem). I also had resco audi recorder running with storing the files on the sd card. As I also red that others have a problem with the delay ring when recieving a phone call when the ring tone is stored on the sd card, this might also have the problem (I only realized it after the hard reset when I was wondering what all those recordings meant to be).
Markus
Click to expand...
Click to collapse
I have cheked out you are reight when you disconnect the Resco audio rec the problem is over

Video Calling broken

I never succeeded in making a Video Call. But when I was the reveiving party, al went well.
I use the latest dutch WM6.1 ROM. When I video dial, it gives an 'in conversation' bleep from the speaker on the backside, then says it does not work, and asks if I want to make a normal phone or send SMS etc.
I used the search for about an hour, but could not find anything else then other people having trouble.
Can I fix this problem?

absolutely no sound on incoming or outgoing calls

Not all the time, just occasionally. I will go to make a call and the screen says that it is dialing, then connected but there is no sound from the speaker.
It also happens occasionally with incoming calls, I see an incoming call and answer it and it says connected but no sound. A soft reset always fixes the problem.
I might have to reset once a day to fix this, but when I went to a nearby city I had to reset at least 6 times during the day.
I have searched the forum but have not been able to find another problem quite like it. Have I missed it?
Cheers,
Fred Wade
Nova Scotia, where the lobster come from...
Try installing another radio. Could help the issue.
Does this sound like the same issue?
http://forum.xda-developers.com/showthread.php?t=407321
u need new radio
u need new radio
look for alltheway ultimate radio thread and download one that fit u the most
http://forum.xda-developers.com/showpost.php?p=1862232&postcount=1464
i advice neon radio it goes well with both wm 6 and wm 6.1
neon is good choice
http://rapidshare.com/files/132028949/NEON_1.58.25.17.rar

[PROB] fuze-BT issue

OK, I'm pretty sure BT worked on the phone. Now, any time I answer from a BT device, the incoming caller is muted. He can hear me, I can't hear him.
If I transfer the caller to the phone (which btw I can hear him) and back again to the BT device, I can then hear him. If I answer the incoming call from the phone buttons, I can hear the caller on my BT device.
I must've spent like 30 calls to my phone (I'm ticked as I'm sure each one counted on my minutes) thinking of different ways to fix this.
I thought it was my BT headset, but it works on my Tilt. So I tried it in my car BT. It can't hear the caller either. So something is wrong.
If I turn off MS Voice Command (which by the way, I reg restored to before I modded it to work) my phone will make the sounds, I hear a beep in my ear. If I answer it form my headset, it works!
I could've sworn I had MSVC turned on ever since I got the unit. And I know I talked to people on my BT headset. Only thing is I don't know if I talked to someone after I did the non-att bloat hardreset.
Anybody have any ideas before I reset my phone?
had similar issue
i had the same problem and tried everything possible till i hard reset.....That fixed the problem initially.....but after i setup MSVC after a few calls it again started doing the same thing. I will be calling HTC tomorrow......will keep you posted unless someone else has an actual solution.
Update
After a couple of hours on the phone with HTC and ATT tech support....it all comes down to it being a hardware error. I went into a ATT store swapped my phone out and came back only to find the touch wheel does not work....went back got another one and finally one that works...bluetooth works fine and so does eveything else.....at least for now
Update
After a couple of hours on the phone with HTC and ATT tech support....it all comes down to it being a hardware error. I went into a ATT store swapped my phone out and came back only to find the touch wheel does not work....went back got another one and finally one that works...bluetooth works fine and so does eveything else.....at least for now
I don't think its hardware that is broken in some units. At least I hope not. Someone else here said they got it to work after resetting the device only to have it break again later. For now, I have my fingers crossed that someone can fix this. Sounds like a BT stack or something that is bad.
starstreak said:
I don't think its hardware that is broken in some units. At least I hope not. Someone else here said they got it to work after resetting the device only to have it break again later. For now, I have my fingers crossed that someone can fix this. Sounds like a BT stack or something that is bad.
Click to expand...
Click to collapse
Judging by the fact that you mention MSVC I am betting this is part of it. I have seen a ton of people complaining about it not working correctly. I think we need to start with that in the hunt.
True. Its either MSVC or BT stack. or both.
HTC Confirmation
I got a confirmation from that it is a software related issue with MSVC but they cannot release a fix until ATT approves it. The only way to speed this up is to have as many fuze users call either ATT or HTC and complain about this.
Try turning off Announce Incoming Caller. Supposedly this is the problem.
Agreed though, we MUST complain to AT&T and HTC on all issues - otherwise we all just sit here and ***** to each other and nothing happens cause they don't know how irked we are...

No sound on incoming/outgoing calls

Hi all,
I have a problem with my new Diamond, that I hope someone can help me with.
Sometimes when I make a call or when I recieve a call, there is no sound in the "internal" speaker. Only if I press the button to enable the "external" speaker, I can here what the person says that I'm calling.
This happens 50-80% of the times that I use the phone. I'm thinking that it might have something to do with that I a use BT headset and a builtin BT system in my car, and the phone can't handle to "change" - or something.
I have the newest Danish ROM on the phone.
Hope somebody got an idea. Thanks.
mnielsen5 said:
Hi all,
I have a problem with my new Diamond, that I hope someone can help me with.
Sometimes when I make a call or when I recieve a call, there is no sound in the "internal" speaker. Only if I press the button to enable the "external" speaker, I can here what the person says that I'm calling.
This happens 50-80% of the times that I use the phone. I'm thinking that it might have something to do with that I a use BT headset and a builtin BT system in my car, and the phone can't handle to "change" - or something.
I have the newest Danish ROM on the phone.
Hope somebody got an idea. Thanks.
Click to expand...
Click to collapse
I`ve the same problem since yesterday, has somebody the same problems??
I have the exact same problem and have not found a fix for this yet
I have checked phone reception and even changed different simcards and carrier.
It still happens and i am using the latest ROM as well.
I downgraded the rom back to factory default.
Same thing happens once in a while.
To me this sound like a hardware related problem and i dont know if HTC will cover this under warranty.
try deleting sms and emails from ur phone and then see
I had this problem after I installed LIVE PVR Call recorder. I uninstalled it and had no more problems.

Categories

Resources