My M3000 starts only in Bootloader mode (3color)
The IPL is: 2.21
SPL :2.18.0001
i can flash only with the newromupdateutility_wizard_noid.
And when i make a Hard Reset the message is "Format is Faild"
Pleas help me
You mixed G3 IPL and G4 SPL, there is no hope, it's a brick.
the IPL nummber never changes.
http://forum.xda-developers.com/showthread.php?p=2042695#post2042695
can i flash only a new bootloader?
or can me send an sd-card img for my m3000?
Related
Hello
I have a Xda/o2 pda gsm phone and I can't enter bootloader menu.
When I reset device i can see only vertical green lines not the 3 colours bootloader menu.
IPL: 2.17
SPL: 1.03
OS 2.17.7.2
How can I enter Bootloader menu?
Can anybody help me ?
Sorry for picture quality ...
Nobody met this problem ????
I can't reflash phone without bootloader menu!
If I plug USB cable in PDA, PC cannot see it!
I succeded to enter Bootlader menu but after flashing with:
CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
or
ruu_prodigy_226102_22610105_022511_tmous_wwe_ship.exe
the phone doesn't start up!
It's shows only green lines screen.
I konw that is a G3 but don't now if it's AKU2 rom. How can i find out ?
Because after flash I have to unlock CID (it;s SIM unlock allready) to finish flashing and start up windows.
So what is the next step after flashing with ... let's say ... first rom posted here ... in order to XDA o2 start working normaly.
Thanks
I have a Cingular 8125 that boots up to the second splash screen and then freezes. The second splash screen just has the network logo, in this case T-Mobile. There is no indication of SPL, IPL, etc., just T-Mobile. I can get it into Bootloader and it shows IPL 2.26 and SPL 2.26. If I then connect the USB, it displays USB. If I disconnect the USB, it still displays USB. I have tried to reinstall T-Mobile and AT&T while in Bootloader and I get an error message stating that the device is not connected. I have also tried to install 1.05, Button's ROM and Munn's RUU while in Bootloader and get the same error message.
Why does USB pop-up when it is connected, but still shows USB when it is disconnected? Why won't the network ROM install when it is in Bootloader?
I am stymied!!
Wizard Splash Screen
jphuffs said:
I have a Cingular 8125 that boots up to the second splash screen and then freezes. The second splash screen just has the network logo, in this case T-Mobile. There is no indication of SPL, IPL, etc., just T-Mobile. I can get it into Bootloader and it shows IPL 2.26 and SPL 2.26. If I then connect the USB, it displays USB. If I disconnect the USB, it still displays USB. I have tried to reinstall T-Mobile and AT&T while in Bootloader and I get an error message stating that the device is not connected. I have also tried to install 1.05, Button's ROM and Munn's RUU while in Bootloader and get the same error message.
Why does USB pop-up when it is connected, but still shows USB when it is disconnected? Why won't the network ROM install when it is in Bootloader?
I am stymied!!
Click to expand...
Click to collapse
I am reposting this question because I didn't receive any help. Somebody out there must have a suggestion
It seems i am also having the exact same problem.
KJAM TNT 5.0 rom IPL/SPL 2.26
i have the same problem!
Hi...
I got stuck in bootloader (Tri-Color)screen with KAIS130 SPL-3.29.HArd i`m not able to boot the OS ... I have installed the
Dutty_s_WM6.1_Official_UC_5.2.19199_RTM__nocube with Radio 1.65.16.25,
i did the HardSPL and still i cannot boot the os cause of the bootloader..
Also i`m trying to 'boot' via mtty.exe but it says command error, it responds
only "task 8" but it stops and cannot write nothing else (device reboots in
bootloder mode)... Is there a way to make my kaiser work ? Cannt unlock
cant change the SPL.
http://forum.xda-developers.com/showthread.php?t=354061
http://forum.xda-developers.com/showthread.php?t=334679
http://forum.xda-developers.com/showthread.php?t=354061
all from these links didn`t help me to boot the phone...
Please just inform me what is wrong in with the spl and how can i reflash again.
Best regards,
In Advance
Hi mates i have vodafone_vpa_compact_ii and its G3.
i unlocked and cid unlocked it with lokiwiz. and then downgraded to buttons rom. and it stuck at 98%. ok then i flashed with Xda_mini launch rom. and then the device restarted in flash and the flash was unsuccessful. and now my
IPL : 1.05
SPL : 2.21
and its having a weird problem that its switching on and off automatically while in bootloader mode. when i attach usb cable it switch off and on. and never stays at bootloader. so please is there any solution for this.?
i tried the file named RUU_Herald_DOPODASIA_WWE_1.7.707.3_02.69.90_Ship_ R.exe
although the process finished successfully but my device did not turned on until hard reset then stuck on the boot screen without any response
i get in the bootloader screen saying that
IPL 1.09.0001
SPL 4.10.Ynag
USB
allthough there is the USB indcator at the buttom but when trying to flash the original RUU it did not get the device info as the active sync is not green and the PC cannot identefy a new hardware!?
please could any one help with this situation ASAP
and if i want to restore my ipl to 4.xx
Thanks in advance